mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 00:04:15 +08:00
9e264f3f85
Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod members of struct spi_device to be an array. But changing the type of these members to array would break the spi driver functionality. To make the transition smoother introduced four new APIs to get/set the spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and spi->cs_gpiod references with get or set API calls. While adding multi-cs support in further patches the chip_select & cs_gpiod members of the spi_device structure would be converted to arrays & the "idx" parameter of the APIs would be used as array index i.e., spi->chip_select[idx] & spi->cs_gpiod[idx] respectively. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Acked-by: Heiko Stuebner <heiko@sntech.de> # Rockchip drivers Reviewed-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> # Aspeed driver Reviewed-by: Dhruva Gole <d-gole@ti.com> # SPI Cadence QSPI Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> # spi-stm32-qspi Acked-by: William Zhang <william.zhang@broadcom.com> # bcm63xx-hsspi driver Reviewed-by: Serge Semin <fancer.lancer@gmail.com> # DW SSI part Link: https://lore.kernel.org/r/167847070432.26.15076794204368669839@mailman-core.alsa-project.org Signed-off-by: Mark Brown <broonie@kernel.org>
1683 lines
44 KiB
C
1683 lines
44 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* SPI bus driver for the Topcliff PCH used by Intel SoCs
|
|
*
|
|
* Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/spi/spidev.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/pch_dma.h>
|
|
|
|
/* Register offsets */
|
|
#define PCH_SPCR 0x00 /* SPI control register */
|
|
#define PCH_SPBRR 0x04 /* SPI baud rate register */
|
|
#define PCH_SPSR 0x08 /* SPI status register */
|
|
#define PCH_SPDWR 0x0C /* SPI write data register */
|
|
#define PCH_SPDRR 0x10 /* SPI read data register */
|
|
#define PCH_SSNXCR 0x18 /* SSN Expand Control Register */
|
|
#define PCH_SRST 0x1C /* SPI reset register */
|
|
#define PCH_ADDRESS_SIZE 0x20
|
|
|
|
#define PCH_SPSR_TFD 0x000007C0
|
|
#define PCH_SPSR_RFD 0x0000F800
|
|
|
|
#define PCH_READABLE(x) (((x) & PCH_SPSR_RFD)>>11)
|
|
#define PCH_WRITABLE(x) (((x) & PCH_SPSR_TFD)>>6)
|
|
|
|
#define PCH_RX_THOLD 7
|
|
#define PCH_RX_THOLD_MAX 15
|
|
|
|
#define PCH_TX_THOLD 2
|
|
|
|
#define PCH_MAX_BAUDRATE 5000000
|
|
#define PCH_MAX_FIFO_DEPTH 16
|
|
|
|
#define STATUS_RUNNING 1
|
|
#define STATUS_EXITING 2
|
|
#define PCH_SLEEP_TIME 10
|
|
|
|
#define SSN_LOW 0x02U
|
|
#define SSN_HIGH 0x03U
|
|
#define SSN_NO_CONTROL 0x00U
|
|
#define PCH_MAX_CS 0xFF
|
|
#define PCI_DEVICE_ID_GE_SPI 0x8816
|
|
|
|
#define SPCR_SPE_BIT (1 << 0)
|
|
#define SPCR_MSTR_BIT (1 << 1)
|
|
#define SPCR_LSBF_BIT (1 << 4)
|
|
#define SPCR_CPHA_BIT (1 << 5)
|
|
#define SPCR_CPOL_BIT (1 << 6)
|
|
#define SPCR_TFIE_BIT (1 << 8)
|
|
#define SPCR_RFIE_BIT (1 << 9)
|
|
#define SPCR_FIE_BIT (1 << 10)
|
|
#define SPCR_ORIE_BIT (1 << 11)
|
|
#define SPCR_MDFIE_BIT (1 << 12)
|
|
#define SPCR_FICLR_BIT (1 << 24)
|
|
#define SPSR_TFI_BIT (1 << 0)
|
|
#define SPSR_RFI_BIT (1 << 1)
|
|
#define SPSR_FI_BIT (1 << 2)
|
|
#define SPSR_ORF_BIT (1 << 3)
|
|
#define SPBRR_SIZE_BIT (1 << 10)
|
|
|
|
#define PCH_ALL (SPCR_TFIE_BIT|SPCR_RFIE_BIT|SPCR_FIE_BIT|\
|
|
SPCR_ORIE_BIT|SPCR_MDFIE_BIT)
|
|
|
|
#define SPCR_RFIC_FIELD 20
|
|
#define SPCR_TFIC_FIELD 16
|
|
|
|
#define MASK_SPBRR_SPBR_BITS ((1 << 10) - 1)
|
|
#define MASK_RFIC_SPCR_BITS (0xf << SPCR_RFIC_FIELD)
|
|
#define MASK_TFIC_SPCR_BITS (0xf << SPCR_TFIC_FIELD)
|
|
|
|
#define PCH_CLOCK_HZ 50000000
|
|
#define PCH_MAX_SPBR 1023
|
|
|
|
/* Definition for ML7213/ML7223/ML7831 by LAPIS Semiconductor */
|
|
#define PCI_DEVICE_ID_ML7213_SPI 0x802c
|
|
#define PCI_DEVICE_ID_ML7223_SPI 0x800F
|
|
#define PCI_DEVICE_ID_ML7831_SPI 0x8816
|
|
|
|
/*
|
|
* Set the number of SPI instance max
|
|
* Intel EG20T PCH : 1ch
|
|
* LAPIS Semiconductor ML7213 IOH : 2ch
|
|
* LAPIS Semiconductor ML7223 IOH : 1ch
|
|
* LAPIS Semiconductor ML7831 IOH : 1ch
|
|
*/
|
|
#define PCH_SPI_MAX_DEV 2
|
|
|
|
#define PCH_BUF_SIZE 4096
|
|
#define PCH_DMA_TRANS_SIZE 12
|
|
|
|
static int use_dma = 1;
|
|
|
|
struct pch_spi_dma_ctrl {
|
|
struct pci_dev *dma_dev;
|
|
struct dma_async_tx_descriptor *desc_tx;
|
|
struct dma_async_tx_descriptor *desc_rx;
|
|
struct pch_dma_slave param_tx;
|
|
struct pch_dma_slave param_rx;
|
|
struct dma_chan *chan_tx;
|
|
struct dma_chan *chan_rx;
|
|
struct scatterlist *sg_tx_p;
|
|
struct scatterlist *sg_rx_p;
|
|
struct scatterlist sg_tx;
|
|
struct scatterlist sg_rx;
|
|
int nent;
|
|
void *tx_buf_virt;
|
|
void *rx_buf_virt;
|
|
dma_addr_t tx_buf_dma;
|
|
dma_addr_t rx_buf_dma;
|
|
};
|
|
/**
|
|
* struct pch_spi_data - Holds the SPI channel specific details
|
|
* @io_remap_addr: The remapped PCI base address
|
|
* @io_base_addr: Base address
|
|
* @master: Pointer to the SPI master structure
|
|
* @work: Reference to work queue handler
|
|
* @wait: Wait queue for waking up upon receiving an
|
|
* interrupt.
|
|
* @transfer_complete: Status of SPI Transfer
|
|
* @bcurrent_msg_processing: Status flag for message processing
|
|
* @lock: Lock for protecting this structure
|
|
* @queue: SPI Message queue
|
|
* @status: Status of the SPI driver
|
|
* @bpw_len: Length of data to be transferred in bits per
|
|
* word
|
|
* @transfer_active: Flag showing active transfer
|
|
* @tx_index: Transmit data count; for bookkeeping during
|
|
* transfer
|
|
* @rx_index: Receive data count; for bookkeeping during
|
|
* transfer
|
|
* @pkt_tx_buff: Buffer for data to be transmitted
|
|
* @pkt_rx_buff: Buffer for received data
|
|
* @n_curnt_chip: The chip number that this SPI driver currently
|
|
* operates on
|
|
* @current_chip: Reference to the current chip that this SPI
|
|
* driver currently operates on
|
|
* @current_msg: The current message that this SPI driver is
|
|
* handling
|
|
* @cur_trans: The current transfer that this SPI driver is
|
|
* handling
|
|
* @board_dat: Reference to the SPI device data structure
|
|
* @plat_dev: platform_device structure
|
|
* @ch: SPI channel number
|
|
* @dma: Local DMA information
|
|
* @use_dma: True if DMA is to be used
|
|
* @irq_reg_sts: Status of IRQ registration
|
|
* @save_total_len: Save length while data is being transferred
|
|
*/
|
|
struct pch_spi_data {
|
|
void __iomem *io_remap_addr;
|
|
unsigned long io_base_addr;
|
|
struct spi_master *master;
|
|
struct work_struct work;
|
|
wait_queue_head_t wait;
|
|
u8 transfer_complete;
|
|
u8 bcurrent_msg_processing;
|
|
spinlock_t lock;
|
|
struct list_head queue;
|
|
u8 status;
|
|
u32 bpw_len;
|
|
u8 transfer_active;
|
|
u32 tx_index;
|
|
u32 rx_index;
|
|
u16 *pkt_tx_buff;
|
|
u16 *pkt_rx_buff;
|
|
u8 n_curnt_chip;
|
|
struct spi_device *current_chip;
|
|
struct spi_message *current_msg;
|
|
struct spi_transfer *cur_trans;
|
|
struct pch_spi_board_data *board_dat;
|
|
struct platform_device *plat_dev;
|
|
int ch;
|
|
struct pch_spi_dma_ctrl dma;
|
|
int use_dma;
|
|
u8 irq_reg_sts;
|
|
int save_total_len;
|
|
};
|
|
|
|
/**
|
|
* struct pch_spi_board_data - Holds the SPI device specific details
|
|
* @pdev: Pointer to the PCI device
|
|
* @suspend_sts: Status of suspend
|
|
* @num: The number of SPI device instance
|
|
*/
|
|
struct pch_spi_board_data {
|
|
struct pci_dev *pdev;
|
|
u8 suspend_sts;
|
|
int num;
|
|
};
|
|
|
|
struct pch_pd_dev_save {
|
|
int num;
|
|
struct platform_device *pd_save[PCH_SPI_MAX_DEV];
|
|
struct pch_spi_board_data *board_dat;
|
|
};
|
|
|
|
static const struct pci_device_id pch_spi_pcidev_id[] = {
|
|
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_GE_SPI), 1, },
|
|
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_SPI), 2, },
|
|
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_SPI), 1, },
|
|
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7831_SPI), 1, },
|
|
{ }
|
|
};
|
|
|
|
/**
|
|
* pch_spi_writereg() - Performs register writes
|
|
* @master: Pointer to struct spi_master.
|
|
* @idx: Register offset.
|
|
* @val: Value to be written to register.
|
|
*/
|
|
static inline void pch_spi_writereg(struct spi_master *master, int idx, u32 val)
|
|
{
|
|
struct pch_spi_data *data = spi_master_get_devdata(master);
|
|
iowrite32(val, (data->io_remap_addr + idx));
|
|
}
|
|
|
|
/**
|
|
* pch_spi_readreg() - Performs register reads
|
|
* @master: Pointer to struct spi_master.
|
|
* @idx: Register offset.
|
|
*/
|
|
static inline u32 pch_spi_readreg(struct spi_master *master, int idx)
|
|
{
|
|
struct pch_spi_data *data = spi_master_get_devdata(master);
|
|
return ioread32(data->io_remap_addr + idx);
|
|
}
|
|
|
|
static inline void pch_spi_setclr_reg(struct spi_master *master, int idx,
|
|
u32 set, u32 clr)
|
|
{
|
|
u32 tmp = pch_spi_readreg(master, idx);
|
|
tmp = (tmp & ~clr) | set;
|
|
pch_spi_writereg(master, idx, tmp);
|
|
}
|
|
|
|
static void pch_spi_set_master_mode(struct spi_master *master)
|
|
{
|
|
pch_spi_setclr_reg(master, PCH_SPCR, SPCR_MSTR_BIT, 0);
|
|
}
|
|
|
|
/**
|
|
* pch_spi_clear_fifo() - Clears the Transmit and Receive FIFOs
|
|
* @master: Pointer to struct spi_master.
|
|
*/
|
|
static void pch_spi_clear_fifo(struct spi_master *master)
|
|
{
|
|
pch_spi_setclr_reg(master, PCH_SPCR, SPCR_FICLR_BIT, 0);
|
|
pch_spi_setclr_reg(master, PCH_SPCR, 0, SPCR_FICLR_BIT);
|
|
}
|
|
|
|
static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val,
|
|
void __iomem *io_remap_addr)
|
|
{
|
|
u32 n_read, tx_index, rx_index, bpw_len;
|
|
u16 *pkt_rx_buffer, *pkt_tx_buff;
|
|
int read_cnt;
|
|
u32 reg_spcr_val;
|
|
void __iomem *spsr;
|
|
void __iomem *spdrr;
|
|
void __iomem *spdwr;
|
|
|
|
spsr = io_remap_addr + PCH_SPSR;
|
|
iowrite32(reg_spsr_val, spsr);
|
|
|
|
if (data->transfer_active) {
|
|
rx_index = data->rx_index;
|
|
tx_index = data->tx_index;
|
|
bpw_len = data->bpw_len;
|
|
pkt_rx_buffer = data->pkt_rx_buff;
|
|
pkt_tx_buff = data->pkt_tx_buff;
|
|
|
|
spdrr = io_remap_addr + PCH_SPDRR;
|
|
spdwr = io_remap_addr + PCH_SPDWR;
|
|
|
|
n_read = PCH_READABLE(reg_spsr_val);
|
|
|
|
for (read_cnt = 0; (read_cnt < n_read); read_cnt++) {
|
|
pkt_rx_buffer[rx_index++] = ioread32(spdrr);
|
|
if (tx_index < bpw_len)
|
|
iowrite32(pkt_tx_buff[tx_index++], spdwr);
|
|
}
|
|
|
|
/* disable RFI if not needed */
|
|
if ((bpw_len - rx_index) <= PCH_MAX_FIFO_DEPTH) {
|
|
reg_spcr_val = ioread32(io_remap_addr + PCH_SPCR);
|
|
reg_spcr_val &= ~SPCR_RFIE_BIT; /* disable RFI */
|
|
|
|
/* reset rx threshold */
|
|
reg_spcr_val &= ~MASK_RFIC_SPCR_BITS;
|
|
reg_spcr_val |= (PCH_RX_THOLD_MAX << SPCR_RFIC_FIELD);
|
|
|
|
iowrite32(reg_spcr_val, (io_remap_addr + PCH_SPCR));
|
|
}
|
|
|
|
/* update counts */
|
|
data->tx_index = tx_index;
|
|
data->rx_index = rx_index;
|
|
|
|
/* if transfer complete interrupt */
|
|
if (reg_spsr_val & SPSR_FI_BIT) {
|
|
if ((tx_index == bpw_len) && (rx_index == tx_index)) {
|
|
/* disable interrupts */
|
|
pch_spi_setclr_reg(data->master, PCH_SPCR, 0,
|
|
PCH_ALL);
|
|
|
|
/* transfer is completed;
|
|
inform pch_spi_process_messages */
|
|
data->transfer_complete = true;
|
|
data->transfer_active = false;
|
|
wake_up(&data->wait);
|
|
} else {
|
|
dev_vdbg(&data->master->dev,
|
|
"%s : Transfer is not completed",
|
|
__func__);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* pch_spi_handler() - Interrupt handler
|
|
* @irq: The interrupt number.
|
|
* @dev_id: Pointer to struct pch_spi_board_data.
|
|
*/
|
|
static irqreturn_t pch_spi_handler(int irq, void *dev_id)
|
|
{
|
|
u32 reg_spsr_val;
|
|
void __iomem *spsr;
|
|
void __iomem *io_remap_addr;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
struct pch_spi_data *data = dev_id;
|
|
struct pch_spi_board_data *board_dat = data->board_dat;
|
|
|
|
if (board_dat->suspend_sts) {
|
|
dev_dbg(&board_dat->pdev->dev,
|
|
"%s returning due to suspend\n", __func__);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
io_remap_addr = data->io_remap_addr;
|
|
spsr = io_remap_addr + PCH_SPSR;
|
|
|
|
reg_spsr_val = ioread32(spsr);
|
|
|
|
if (reg_spsr_val & SPSR_ORF_BIT) {
|
|
dev_err(&board_dat->pdev->dev, "%s Over run error\n", __func__);
|
|
if (data->current_msg->complete) {
|
|
data->transfer_complete = true;
|
|
data->current_msg->status = -EIO;
|
|
data->current_msg->complete(data->current_msg->context);
|
|
data->bcurrent_msg_processing = false;
|
|
data->current_msg = NULL;
|
|
data->cur_trans = NULL;
|
|
}
|
|
}
|
|
|
|
if (data->use_dma)
|
|
return IRQ_NONE;
|
|
|
|
/* Check if the interrupt is for SPI device */
|
|
if (reg_spsr_val & (SPSR_FI_BIT | SPSR_RFI_BIT)) {
|
|
pch_spi_handler_sub(data, reg_spsr_val, io_remap_addr);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
dev_dbg(&board_dat->pdev->dev, "%s EXIT return value=%d\n",
|
|
__func__, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* pch_spi_set_baud_rate() - Sets SPBR field in SPBRR
|
|
* @master: Pointer to struct spi_master.
|
|
* @speed_hz: Baud rate.
|
|
*/
|
|
static void pch_spi_set_baud_rate(struct spi_master *master, u32 speed_hz)
|
|
{
|
|
u32 n_spbr = PCH_CLOCK_HZ / (speed_hz * 2);
|
|
|
|
/* if baud rate is less than we can support limit it */
|
|
if (n_spbr > PCH_MAX_SPBR)
|
|
n_spbr = PCH_MAX_SPBR;
|
|
|
|
pch_spi_setclr_reg(master, PCH_SPBRR, n_spbr, MASK_SPBRR_SPBR_BITS);
|
|
}
|
|
|
|
/**
|
|
* pch_spi_set_bits_per_word() - Sets SIZE field in SPBRR
|
|
* @master: Pointer to struct spi_master.
|
|
* @bits_per_word: Bits per word for SPI transfer.
|
|
*/
|
|
static void pch_spi_set_bits_per_word(struct spi_master *master,
|
|
u8 bits_per_word)
|
|
{
|
|
if (bits_per_word == 8)
|
|
pch_spi_setclr_reg(master, PCH_SPBRR, 0, SPBRR_SIZE_BIT);
|
|
else
|
|
pch_spi_setclr_reg(master, PCH_SPBRR, SPBRR_SIZE_BIT, 0);
|
|
}
|
|
|
|
/**
|
|
* pch_spi_setup_transfer() - Configures the PCH SPI hardware for transfer
|
|
* @spi: Pointer to struct spi_device.
|
|
*/
|
|
static void pch_spi_setup_transfer(struct spi_device *spi)
|
|
{
|
|
u32 flags = 0;
|
|
|
|
dev_dbg(&spi->dev, "%s SPBRR content =%x setting baud rate=%d\n",
|
|
__func__, pch_spi_readreg(spi->master, PCH_SPBRR),
|
|
spi->max_speed_hz);
|
|
pch_spi_set_baud_rate(spi->master, spi->max_speed_hz);
|
|
|
|
/* set bits per word */
|
|
pch_spi_set_bits_per_word(spi->master, spi->bits_per_word);
|
|
|
|
if (!(spi->mode & SPI_LSB_FIRST))
|
|
flags |= SPCR_LSBF_BIT;
|
|
if (spi->mode & SPI_CPOL)
|
|
flags |= SPCR_CPOL_BIT;
|
|
if (spi->mode & SPI_CPHA)
|
|
flags |= SPCR_CPHA_BIT;
|
|
pch_spi_setclr_reg(spi->master, PCH_SPCR, flags,
|
|
(SPCR_LSBF_BIT | SPCR_CPOL_BIT | SPCR_CPHA_BIT));
|
|
|
|
/* Clear the FIFO by toggling FICLR to 1 and back to 0 */
|
|
pch_spi_clear_fifo(spi->master);
|
|
}
|
|
|
|
/**
|
|
* pch_spi_reset() - Clears SPI registers
|
|
* @master: Pointer to struct spi_master.
|
|
*/
|
|
static void pch_spi_reset(struct spi_master *master)
|
|
{
|
|
/* write 1 to reset SPI */
|
|
pch_spi_writereg(master, PCH_SRST, 0x1);
|
|
|
|
/* clear reset */
|
|
pch_spi_writereg(master, PCH_SRST, 0x0);
|
|
}
|
|
|
|
static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
|
|
{
|
|
struct pch_spi_data *data = spi_master_get_devdata(pspi->master);
|
|
int retval;
|
|
unsigned long flags;
|
|
|
|
/* We won't process any messages if we have been asked to terminate */
|
|
if (data->status == STATUS_EXITING) {
|
|
dev_err(&pspi->dev, "%s status = STATUS_EXITING.\n", __func__);
|
|
retval = -ESHUTDOWN;
|
|
goto err_out;
|
|
}
|
|
|
|
/* If suspended ,return -EINVAL */
|
|
if (data->board_dat->suspend_sts) {
|
|
dev_err(&pspi->dev, "%s suspend; returning EINVAL\n", __func__);
|
|
retval = -EINVAL;
|
|
goto err_out;
|
|
}
|
|
|
|
/* set status of message */
|
|
pmsg->actual_length = 0;
|
|
dev_dbg(&pspi->dev, "%s - pmsg->status =%d\n", __func__, pmsg->status);
|
|
|
|
pmsg->status = -EINPROGRESS;
|
|
spin_lock_irqsave(&data->lock, flags);
|
|
/* add message to queue */
|
|
list_add_tail(&pmsg->queue, &data->queue);
|
|
spin_unlock_irqrestore(&data->lock, flags);
|
|
|
|
dev_dbg(&pspi->dev, "%s - Invoked list_add_tail\n", __func__);
|
|
|
|
schedule_work(&data->work);
|
|
dev_dbg(&pspi->dev, "%s - Invoked queue work\n", __func__);
|
|
|
|
retval = 0;
|
|
|
|
err_out:
|
|
dev_dbg(&pspi->dev, "%s RETURN=%d\n", __func__, retval);
|
|
return retval;
|
|
}
|
|
|
|
static inline void pch_spi_select_chip(struct pch_spi_data *data,
|
|
struct spi_device *pspi)
|
|
{
|
|
if (data->current_chip != NULL) {
|
|
if (spi_get_chipselect(pspi, 0) != data->n_curnt_chip) {
|
|
dev_dbg(&pspi->dev, "%s : different slave\n", __func__);
|
|
data->current_chip = NULL;
|
|
}
|
|
}
|
|
|
|
data->current_chip = pspi;
|
|
|
|
data->n_curnt_chip = spi_get_chipselect(data->current_chip, 0);
|
|
|
|
dev_dbg(&pspi->dev, "%s :Invoking pch_spi_setup_transfer\n", __func__);
|
|
pch_spi_setup_transfer(pspi);
|
|
}
|
|
|
|
static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw)
|
|
{
|
|
int size;
|
|
u32 n_writes;
|
|
int j;
|
|
struct spi_message *pmsg, *tmp;
|
|
const u8 *tx_buf;
|
|
const u16 *tx_sbuf;
|
|
|
|
/* set baud rate if needed */
|
|
if (data->cur_trans->speed_hz) {
|
|
dev_dbg(&data->master->dev, "%s:setting baud rate\n", __func__);
|
|
pch_spi_set_baud_rate(data->master, data->cur_trans->speed_hz);
|
|
}
|
|
|
|
/* set bits per word if needed */
|
|
if (data->cur_trans->bits_per_word &&
|
|
(data->current_msg->spi->bits_per_word != data->cur_trans->bits_per_word)) {
|
|
dev_dbg(&data->master->dev, "%s:set bits per word\n", __func__);
|
|
pch_spi_set_bits_per_word(data->master,
|
|
data->cur_trans->bits_per_word);
|
|
*bpw = data->cur_trans->bits_per_word;
|
|
} else {
|
|
*bpw = data->current_msg->spi->bits_per_word;
|
|
}
|
|
|
|
/* reset Tx/Rx index */
|
|
data->tx_index = 0;
|
|
data->rx_index = 0;
|
|
|
|
data->bpw_len = data->cur_trans->len / (*bpw / 8);
|
|
|
|
/* find alloc size */
|
|
size = data->cur_trans->len * sizeof(*data->pkt_tx_buff);
|
|
|
|
/* allocate memory for pkt_tx_buff & pkt_rx_buffer */
|
|
data->pkt_tx_buff = kzalloc(size, GFP_KERNEL);
|
|
if (data->pkt_tx_buff != NULL) {
|
|
data->pkt_rx_buff = kzalloc(size, GFP_KERNEL);
|
|
if (!data->pkt_rx_buff) {
|
|
kfree(data->pkt_tx_buff);
|
|
data->pkt_tx_buff = NULL;
|
|
}
|
|
}
|
|
|
|
if (!data->pkt_rx_buff) {
|
|
/* flush queue and set status of all transfers to -ENOMEM */
|
|
list_for_each_entry_safe(pmsg, tmp, data->queue.next, queue) {
|
|
pmsg->status = -ENOMEM;
|
|
|
|
if (pmsg->complete)
|
|
pmsg->complete(pmsg->context);
|
|
|
|
/* delete from queue */
|
|
list_del_init(&pmsg->queue);
|
|
}
|
|
return;
|
|
}
|
|
|
|
/* copy Tx Data */
|
|
if (data->cur_trans->tx_buf != NULL) {
|
|
if (*bpw == 8) {
|
|
tx_buf = data->cur_trans->tx_buf;
|
|
for (j = 0; j < data->bpw_len; j++)
|
|
data->pkt_tx_buff[j] = *tx_buf++;
|
|
} else {
|
|
tx_sbuf = data->cur_trans->tx_buf;
|
|
for (j = 0; j < data->bpw_len; j++)
|
|
data->pkt_tx_buff[j] = *tx_sbuf++;
|
|
}
|
|
}
|
|
|
|
/* if len greater than PCH_MAX_FIFO_DEPTH, write 16,else len bytes */
|
|
n_writes = data->bpw_len;
|
|
if (n_writes > PCH_MAX_FIFO_DEPTH)
|
|
n_writes = PCH_MAX_FIFO_DEPTH;
|
|
|
|
dev_dbg(&data->master->dev,
|
|
"\n%s:Pulling down SSN low - writing 0x2 to SSNXCR\n",
|
|
__func__);
|
|
pch_spi_writereg(data->master, PCH_SSNXCR, SSN_LOW);
|
|
|
|
for (j = 0; j < n_writes; j++)
|
|
pch_spi_writereg(data->master, PCH_SPDWR, data->pkt_tx_buff[j]);
|
|
|
|
/* update tx_index */
|
|
data->tx_index = j;
|
|
|
|
/* reset transfer complete flag */
|
|
data->transfer_complete = false;
|
|
data->transfer_active = true;
|
|
}
|
|
|
|
static void pch_spi_nomore_transfer(struct pch_spi_data *data)
|
|
{
|
|
struct spi_message *pmsg, *tmp;
|
|
dev_dbg(&data->master->dev, "%s called\n", __func__);
|
|
/* Invoke complete callback
|
|
* [To the spi core..indicating end of transfer] */
|
|
data->current_msg->status = 0;
|
|
|
|
if (data->current_msg->complete) {
|
|
dev_dbg(&data->master->dev,
|
|
"%s:Invoking callback of SPI core\n", __func__);
|
|
data->current_msg->complete(data->current_msg->context);
|
|
}
|
|
|
|
/* update status in global variable */
|
|
data->bcurrent_msg_processing = false;
|
|
|
|
dev_dbg(&data->master->dev,
|
|
"%s:data->bcurrent_msg_processing = false\n", __func__);
|
|
|
|
data->current_msg = NULL;
|
|
data->cur_trans = NULL;
|
|
|
|
/* check if we have items in list and not suspending
|
|
* return 1 if list empty */
|
|
if ((list_empty(&data->queue) == 0) &&
|
|
(!data->board_dat->suspend_sts) &&
|
|
(data->status != STATUS_EXITING)) {
|
|
/* We have some more work to do (either there is more tranint
|
|
* bpw;sfer requests in the current message or there are
|
|
*more messages)
|
|
*/
|
|
dev_dbg(&data->master->dev, "%s:Invoke queue_work\n", __func__);
|
|
schedule_work(&data->work);
|
|
} else if (data->board_dat->suspend_sts ||
|
|
data->status == STATUS_EXITING) {
|
|
dev_dbg(&data->master->dev,
|
|
"%s suspend/remove initiated, flushing queue\n",
|
|
__func__);
|
|
list_for_each_entry_safe(pmsg, tmp, data->queue.next, queue) {
|
|
pmsg->status = -EIO;
|
|
|
|
if (pmsg->complete)
|
|
pmsg->complete(pmsg->context);
|
|
|
|
/* delete from queue */
|
|
list_del_init(&pmsg->queue);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void pch_spi_set_ir(struct pch_spi_data *data)
|
|
{
|
|
/* enable interrupts, set threshold, enable SPI */
|
|
if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH)
|
|
/* set receive threshold to PCH_RX_THOLD */
|
|
pch_spi_setclr_reg(data->master, PCH_SPCR,
|
|
PCH_RX_THOLD << SPCR_RFIC_FIELD |
|
|
SPCR_FIE_BIT | SPCR_RFIE_BIT |
|
|
SPCR_ORIE_BIT | SPCR_SPE_BIT,
|
|
MASK_RFIC_SPCR_BITS | PCH_ALL);
|
|
else
|
|
/* set receive threshold to maximum */
|
|
pch_spi_setclr_reg(data->master, PCH_SPCR,
|
|
PCH_RX_THOLD_MAX << SPCR_RFIC_FIELD |
|
|
SPCR_FIE_BIT | SPCR_ORIE_BIT |
|
|
SPCR_SPE_BIT,
|
|
MASK_RFIC_SPCR_BITS | PCH_ALL);
|
|
|
|
/* Wait until the transfer completes; go to sleep after
|
|
initiating the transfer. */
|
|
dev_dbg(&data->master->dev,
|
|
"%s:waiting for transfer to get over\n", __func__);
|
|
|
|
wait_event_interruptible(data->wait, data->transfer_complete);
|
|
|
|
/* clear all interrupts */
|
|
pch_spi_writereg(data->master, PCH_SPSR,
|
|
pch_spi_readreg(data->master, PCH_SPSR));
|
|
/* Disable interrupts and SPI transfer */
|
|
pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL | SPCR_SPE_BIT);
|
|
/* clear FIFO */
|
|
pch_spi_clear_fifo(data->master);
|
|
}
|
|
|
|
static void pch_spi_copy_rx_data(struct pch_spi_data *data, int bpw)
|
|
{
|
|
int j;
|
|
u8 *rx_buf;
|
|
u16 *rx_sbuf;
|
|
|
|
/* copy Rx Data */
|
|
if (!data->cur_trans->rx_buf)
|
|
return;
|
|
|
|
if (bpw == 8) {
|
|
rx_buf = data->cur_trans->rx_buf;
|
|
for (j = 0; j < data->bpw_len; j++)
|
|
*rx_buf++ = data->pkt_rx_buff[j] & 0xFF;
|
|
} else {
|
|
rx_sbuf = data->cur_trans->rx_buf;
|
|
for (j = 0; j < data->bpw_len; j++)
|
|
*rx_sbuf++ = data->pkt_rx_buff[j];
|
|
}
|
|
}
|
|
|
|
static void pch_spi_copy_rx_data_for_dma(struct pch_spi_data *data, int bpw)
|
|
{
|
|
int j;
|
|
u8 *rx_buf;
|
|
u16 *rx_sbuf;
|
|
const u8 *rx_dma_buf;
|
|
const u16 *rx_dma_sbuf;
|
|
|
|
/* copy Rx Data */
|
|
if (!data->cur_trans->rx_buf)
|
|
return;
|
|
|
|
if (bpw == 8) {
|
|
rx_buf = data->cur_trans->rx_buf;
|
|
rx_dma_buf = data->dma.rx_buf_virt;
|
|
for (j = 0; j < data->bpw_len; j++)
|
|
*rx_buf++ = *rx_dma_buf++ & 0xFF;
|
|
data->cur_trans->rx_buf = rx_buf;
|
|
} else {
|
|
rx_sbuf = data->cur_trans->rx_buf;
|
|
rx_dma_sbuf = data->dma.rx_buf_virt;
|
|
for (j = 0; j < data->bpw_len; j++)
|
|
*rx_sbuf++ = *rx_dma_sbuf++;
|
|
data->cur_trans->rx_buf = rx_sbuf;
|
|
}
|
|
}
|
|
|
|
static int pch_spi_start_transfer(struct pch_spi_data *data)
|
|
{
|
|
struct pch_spi_dma_ctrl *dma;
|
|
unsigned long flags;
|
|
int rtn;
|
|
|
|
dma = &data->dma;
|
|
|
|
spin_lock_irqsave(&data->lock, flags);
|
|
|
|
/* disable interrupts, SPI set enable */
|
|
pch_spi_setclr_reg(data->master, PCH_SPCR, SPCR_SPE_BIT, PCH_ALL);
|
|
|
|
spin_unlock_irqrestore(&data->lock, flags);
|
|
|
|
/* Wait until the transfer completes; go to sleep after
|
|
initiating the transfer. */
|
|
dev_dbg(&data->master->dev,
|
|
"%s:waiting for transfer to get over\n", __func__);
|
|
rtn = wait_event_interruptible_timeout(data->wait,
|
|
data->transfer_complete,
|
|
msecs_to_jiffies(2 * HZ));
|
|
if (!rtn)
|
|
dev_err(&data->master->dev,
|
|
"%s wait-event timeout\n", __func__);
|
|
|
|
dma_sync_sg_for_cpu(&data->master->dev, dma->sg_rx_p, dma->nent,
|
|
DMA_FROM_DEVICE);
|
|
|
|
dma_sync_sg_for_cpu(&data->master->dev, dma->sg_tx_p, dma->nent,
|
|
DMA_FROM_DEVICE);
|
|
memset(data->dma.tx_buf_virt, 0, PAGE_SIZE);
|
|
|
|
async_tx_ack(dma->desc_rx);
|
|
async_tx_ack(dma->desc_tx);
|
|
kfree(dma->sg_tx_p);
|
|
kfree(dma->sg_rx_p);
|
|
|
|
spin_lock_irqsave(&data->lock, flags);
|
|
|
|
/* clear fifo threshold, disable interrupts, disable SPI transfer */
|
|
pch_spi_setclr_reg(data->master, PCH_SPCR, 0,
|
|
MASK_RFIC_SPCR_BITS | MASK_TFIC_SPCR_BITS | PCH_ALL |
|
|
SPCR_SPE_BIT);
|
|
/* clear all interrupts */
|
|
pch_spi_writereg(data->master, PCH_SPSR,
|
|
pch_spi_readreg(data->master, PCH_SPSR));
|
|
/* clear FIFO */
|
|
pch_spi_clear_fifo(data->master);
|
|
|
|
spin_unlock_irqrestore(&data->lock, flags);
|
|
|
|
return rtn;
|
|
}
|
|
|
|
static void pch_dma_rx_complete(void *arg)
|
|
{
|
|
struct pch_spi_data *data = arg;
|
|
|
|
/* transfer is completed;inform pch_spi_process_messages_dma */
|
|
data->transfer_complete = true;
|
|
wake_up_interruptible(&data->wait);
|
|
}
|
|
|
|
static bool pch_spi_filter(struct dma_chan *chan, void *slave)
|
|
{
|
|
struct pch_dma_slave *param = slave;
|
|
|
|
if ((chan->chan_id == param->chan_id) &&
|
|
(param->dma_dev == chan->device->dev)) {
|
|
chan->private = param;
|
|
return true;
|
|
} else {
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static void pch_spi_request_dma(struct pch_spi_data *data, int bpw)
|
|
{
|
|
dma_cap_mask_t mask;
|
|
struct dma_chan *chan;
|
|
struct pci_dev *dma_dev;
|
|
struct pch_dma_slave *param;
|
|
struct pch_spi_dma_ctrl *dma;
|
|
unsigned int width;
|
|
|
|
if (bpw == 8)
|
|
width = PCH_DMA_WIDTH_1_BYTE;
|
|
else
|
|
width = PCH_DMA_WIDTH_2_BYTES;
|
|
|
|
dma = &data->dma;
|
|
dma_cap_zero(mask);
|
|
dma_cap_set(DMA_SLAVE, mask);
|
|
|
|
/* Get DMA's dev information */
|
|
dma_dev = pci_get_slot(data->board_dat->pdev->bus,
|
|
PCI_DEVFN(PCI_SLOT(data->board_dat->pdev->devfn), 0));
|
|
|
|
/* Set Tx DMA */
|
|
param = &dma->param_tx;
|
|
param->dma_dev = &dma_dev->dev;
|
|
param->chan_id = data->ch * 2; /* Tx = 0, 2 */
|
|
param->tx_reg = data->io_base_addr + PCH_SPDWR;
|
|
param->width = width;
|
|
chan = dma_request_channel(mask, pch_spi_filter, param);
|
|
if (!chan) {
|
|
dev_err(&data->master->dev,
|
|
"ERROR: dma_request_channel FAILS(Tx)\n");
|
|
goto out;
|
|
}
|
|
dma->chan_tx = chan;
|
|
|
|
/* Set Rx DMA */
|
|
param = &dma->param_rx;
|
|
param->dma_dev = &dma_dev->dev;
|
|
param->chan_id = data->ch * 2 + 1; /* Rx = Tx + 1 */
|
|
param->rx_reg = data->io_base_addr + PCH_SPDRR;
|
|
param->width = width;
|
|
chan = dma_request_channel(mask, pch_spi_filter, param);
|
|
if (!chan) {
|
|
dev_err(&data->master->dev,
|
|
"ERROR: dma_request_channel FAILS(Rx)\n");
|
|
dma_release_channel(dma->chan_tx);
|
|
dma->chan_tx = NULL;
|
|
goto out;
|
|
}
|
|
dma->chan_rx = chan;
|
|
|
|
dma->dma_dev = dma_dev;
|
|
return;
|
|
out:
|
|
pci_dev_put(dma_dev);
|
|
data->use_dma = 0;
|
|
}
|
|
|
|
static void pch_spi_release_dma(struct pch_spi_data *data)
|
|
{
|
|
struct pch_spi_dma_ctrl *dma;
|
|
|
|
dma = &data->dma;
|
|
if (dma->chan_tx) {
|
|
dma_release_channel(dma->chan_tx);
|
|
dma->chan_tx = NULL;
|
|
}
|
|
if (dma->chan_rx) {
|
|
dma_release_channel(dma->chan_rx);
|
|
dma->chan_rx = NULL;
|
|
}
|
|
|
|
pci_dev_put(dma->dma_dev);
|
|
}
|
|
|
|
static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
|
|
{
|
|
const u8 *tx_buf;
|
|
const u16 *tx_sbuf;
|
|
u8 *tx_dma_buf;
|
|
u16 *tx_dma_sbuf;
|
|
struct scatterlist *sg;
|
|
struct dma_async_tx_descriptor *desc_tx;
|
|
struct dma_async_tx_descriptor *desc_rx;
|
|
int num;
|
|
int i;
|
|
int size;
|
|
int rem;
|
|
int head;
|
|
unsigned long flags;
|
|
struct pch_spi_dma_ctrl *dma;
|
|
|
|
dma = &data->dma;
|
|
|
|
/* set baud rate if needed */
|
|
if (data->cur_trans->speed_hz) {
|
|
dev_dbg(&data->master->dev, "%s:setting baud rate\n", __func__);
|
|
spin_lock_irqsave(&data->lock, flags);
|
|
pch_spi_set_baud_rate(data->master, data->cur_trans->speed_hz);
|
|
spin_unlock_irqrestore(&data->lock, flags);
|
|
}
|
|
|
|
/* set bits per word if needed */
|
|
if (data->cur_trans->bits_per_word &&
|
|
(data->current_msg->spi->bits_per_word !=
|
|
data->cur_trans->bits_per_word)) {
|
|
dev_dbg(&data->master->dev, "%s:set bits per word\n", __func__);
|
|
spin_lock_irqsave(&data->lock, flags);
|
|
pch_spi_set_bits_per_word(data->master,
|
|
data->cur_trans->bits_per_word);
|
|
spin_unlock_irqrestore(&data->lock, flags);
|
|
*bpw = data->cur_trans->bits_per_word;
|
|
} else {
|
|
*bpw = data->current_msg->spi->bits_per_word;
|
|
}
|
|
data->bpw_len = data->cur_trans->len / (*bpw / 8);
|
|
|
|
if (data->bpw_len > PCH_BUF_SIZE) {
|
|
data->bpw_len = PCH_BUF_SIZE;
|
|
data->cur_trans->len -= PCH_BUF_SIZE;
|
|
}
|
|
|
|
/* copy Tx Data */
|
|
if (data->cur_trans->tx_buf != NULL) {
|
|
if (*bpw == 8) {
|
|
tx_buf = data->cur_trans->tx_buf;
|
|
tx_dma_buf = dma->tx_buf_virt;
|
|
for (i = 0; i < data->bpw_len; i++)
|
|
*tx_dma_buf++ = *tx_buf++;
|
|
} else {
|
|
tx_sbuf = data->cur_trans->tx_buf;
|
|
tx_dma_sbuf = dma->tx_buf_virt;
|
|
for (i = 0; i < data->bpw_len; i++)
|
|
*tx_dma_sbuf++ = *tx_sbuf++;
|
|
}
|
|
}
|
|
|
|
/* Calculate Rx parameter for DMA transmitting */
|
|
if (data->bpw_len > PCH_DMA_TRANS_SIZE) {
|
|
if (data->bpw_len % PCH_DMA_TRANS_SIZE) {
|
|
num = data->bpw_len / PCH_DMA_TRANS_SIZE + 1;
|
|
rem = data->bpw_len % PCH_DMA_TRANS_SIZE;
|
|
} else {
|
|
num = data->bpw_len / PCH_DMA_TRANS_SIZE;
|
|
rem = PCH_DMA_TRANS_SIZE;
|
|
}
|
|
size = PCH_DMA_TRANS_SIZE;
|
|
} else {
|
|
num = 1;
|
|
size = data->bpw_len;
|
|
rem = data->bpw_len;
|
|
}
|
|
dev_dbg(&data->master->dev, "%s num=%d size=%d rem=%d\n",
|
|
__func__, num, size, rem);
|
|
spin_lock_irqsave(&data->lock, flags);
|
|
|
|
/* set receive fifo threshold and transmit fifo threshold */
|
|
pch_spi_setclr_reg(data->master, PCH_SPCR,
|
|
((size - 1) << SPCR_RFIC_FIELD) |
|
|
(PCH_TX_THOLD << SPCR_TFIC_FIELD),
|
|
MASK_RFIC_SPCR_BITS | MASK_TFIC_SPCR_BITS);
|
|
|
|
spin_unlock_irqrestore(&data->lock, flags);
|
|
|
|
/* RX */
|
|
dma->sg_rx_p = kmalloc_array(num, sizeof(*dma->sg_rx_p), GFP_ATOMIC);
|
|
if (!dma->sg_rx_p)
|
|
return;
|
|
|
|
sg_init_table(dma->sg_rx_p, num); /* Initialize SG table */
|
|
/* offset, length setting */
|
|
sg = dma->sg_rx_p;
|
|
for (i = 0; i < num; i++, sg++) {
|
|
if (i == (num - 2)) {
|
|
sg->offset = size * i;
|
|
sg->offset = sg->offset * (*bpw / 8);
|
|
sg_set_page(sg, virt_to_page(dma->rx_buf_virt), rem,
|
|
sg->offset);
|
|
sg_dma_len(sg) = rem;
|
|
} else if (i == (num - 1)) {
|
|
sg->offset = size * (i - 1) + rem;
|
|
sg->offset = sg->offset * (*bpw / 8);
|
|
sg_set_page(sg, virt_to_page(dma->rx_buf_virt), size,
|
|
sg->offset);
|
|
sg_dma_len(sg) = size;
|
|
} else {
|
|
sg->offset = size * i;
|
|
sg->offset = sg->offset * (*bpw / 8);
|
|
sg_set_page(sg, virt_to_page(dma->rx_buf_virt), size,
|
|
sg->offset);
|
|
sg_dma_len(sg) = size;
|
|
}
|
|
sg_dma_address(sg) = dma->rx_buf_dma + sg->offset;
|
|
}
|
|
sg = dma->sg_rx_p;
|
|
desc_rx = dmaengine_prep_slave_sg(dma->chan_rx, sg,
|
|
num, DMA_DEV_TO_MEM,
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
if (!desc_rx) {
|
|
dev_err(&data->master->dev,
|
|
"%s:dmaengine_prep_slave_sg Failed\n", __func__);
|
|
return;
|
|
}
|
|
dma_sync_sg_for_device(&data->master->dev, sg, num, DMA_FROM_DEVICE);
|
|
desc_rx->callback = pch_dma_rx_complete;
|
|
desc_rx->callback_param = data;
|
|
dma->nent = num;
|
|
dma->desc_rx = desc_rx;
|
|
|
|
/* Calculate Tx parameter for DMA transmitting */
|
|
if (data->bpw_len > PCH_MAX_FIFO_DEPTH) {
|
|
head = PCH_MAX_FIFO_DEPTH - PCH_DMA_TRANS_SIZE;
|
|
if (data->bpw_len % PCH_DMA_TRANS_SIZE > 4) {
|
|
num = data->bpw_len / PCH_DMA_TRANS_SIZE + 1;
|
|
rem = data->bpw_len % PCH_DMA_TRANS_SIZE - head;
|
|
} else {
|
|
num = data->bpw_len / PCH_DMA_TRANS_SIZE;
|
|
rem = data->bpw_len % PCH_DMA_TRANS_SIZE +
|
|
PCH_DMA_TRANS_SIZE - head;
|
|
}
|
|
size = PCH_DMA_TRANS_SIZE;
|
|
} else {
|
|
num = 1;
|
|
size = data->bpw_len;
|
|
rem = data->bpw_len;
|
|
head = 0;
|
|
}
|
|
|
|
dma->sg_tx_p = kmalloc_array(num, sizeof(*dma->sg_tx_p), GFP_ATOMIC);
|
|
if (!dma->sg_tx_p)
|
|
return;
|
|
|
|
sg_init_table(dma->sg_tx_p, num); /* Initialize SG table */
|
|
/* offset, length setting */
|
|
sg = dma->sg_tx_p;
|
|
for (i = 0; i < num; i++, sg++) {
|
|
if (i == 0) {
|
|
sg->offset = 0;
|
|
sg_set_page(sg, virt_to_page(dma->tx_buf_virt), size + head,
|
|
sg->offset);
|
|
sg_dma_len(sg) = size + head;
|
|
} else if (i == (num - 1)) {
|
|
sg->offset = head + size * i;
|
|
sg->offset = sg->offset * (*bpw / 8);
|
|
sg_set_page(sg, virt_to_page(dma->tx_buf_virt), rem,
|
|
sg->offset);
|
|
sg_dma_len(sg) = rem;
|
|
} else {
|
|
sg->offset = head + size * i;
|
|
sg->offset = sg->offset * (*bpw / 8);
|
|
sg_set_page(sg, virt_to_page(dma->tx_buf_virt), size,
|
|
sg->offset);
|
|
sg_dma_len(sg) = size;
|
|
}
|
|
sg_dma_address(sg) = dma->tx_buf_dma + sg->offset;
|
|
}
|
|
sg = dma->sg_tx_p;
|
|
desc_tx = dmaengine_prep_slave_sg(dma->chan_tx,
|
|
sg, num, DMA_MEM_TO_DEV,
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
if (!desc_tx) {
|
|
dev_err(&data->master->dev,
|
|
"%s:dmaengine_prep_slave_sg Failed\n", __func__);
|
|
return;
|
|
}
|
|
dma_sync_sg_for_device(&data->master->dev, sg, num, DMA_TO_DEVICE);
|
|
desc_tx->callback = NULL;
|
|
desc_tx->callback_param = data;
|
|
dma->nent = num;
|
|
dma->desc_tx = desc_tx;
|
|
|
|
dev_dbg(&data->master->dev, "%s:Pulling down SSN low - writing 0x2 to SSNXCR\n", __func__);
|
|
|
|
spin_lock_irqsave(&data->lock, flags);
|
|
pch_spi_writereg(data->master, PCH_SSNXCR, SSN_LOW);
|
|
desc_rx->tx_submit(desc_rx);
|
|
desc_tx->tx_submit(desc_tx);
|
|
spin_unlock_irqrestore(&data->lock, flags);
|
|
|
|
/* reset transfer complete flag */
|
|
data->transfer_complete = false;
|
|
}
|
|
|
|
static void pch_spi_process_messages(struct work_struct *pwork)
|
|
{
|
|
struct spi_message *pmsg, *tmp;
|
|
struct pch_spi_data *data;
|
|
int bpw;
|
|
|
|
data = container_of(pwork, struct pch_spi_data, work);
|
|
dev_dbg(&data->master->dev, "%s data initialized\n", __func__);
|
|
|
|
spin_lock(&data->lock);
|
|
/* check if suspend has been initiated;if yes flush queue */
|
|
if (data->board_dat->suspend_sts || (data->status == STATUS_EXITING)) {
|
|
dev_dbg(&data->master->dev,
|
|
"%s suspend/remove initiated, flushing queue\n", __func__);
|
|
list_for_each_entry_safe(pmsg, tmp, data->queue.next, queue) {
|
|
pmsg->status = -EIO;
|
|
|
|
if (pmsg->complete) {
|
|
spin_unlock(&data->lock);
|
|
pmsg->complete(pmsg->context);
|
|
spin_lock(&data->lock);
|
|
}
|
|
|
|
/* delete from queue */
|
|
list_del_init(&pmsg->queue);
|
|
}
|
|
|
|
spin_unlock(&data->lock);
|
|
return;
|
|
}
|
|
|
|
data->bcurrent_msg_processing = true;
|
|
dev_dbg(&data->master->dev,
|
|
"%s Set data->bcurrent_msg_processing= true\n", __func__);
|
|
|
|
/* Get the message from the queue and delete it from there. */
|
|
data->current_msg = list_entry(data->queue.next, struct spi_message,
|
|
queue);
|
|
|
|
list_del_init(&data->current_msg->queue);
|
|
|
|
data->current_msg->status = 0;
|
|
|
|
pch_spi_select_chip(data, data->current_msg->spi);
|
|
|
|
spin_unlock(&data->lock);
|
|
|
|
if (data->use_dma)
|
|
pch_spi_request_dma(data,
|
|
data->current_msg->spi->bits_per_word);
|
|
pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL);
|
|
do {
|
|
int cnt;
|
|
/* If we are already processing a message get the next
|
|
transfer structure from the message otherwise retrieve
|
|
the 1st transfer request from the message. */
|
|
spin_lock(&data->lock);
|
|
if (data->cur_trans == NULL) {
|
|
data->cur_trans =
|
|
list_entry(data->current_msg->transfers.next,
|
|
struct spi_transfer, transfer_list);
|
|
dev_dbg(&data->master->dev,
|
|
"%s :Getting 1st transfer message\n",
|
|
__func__);
|
|
} else {
|
|
data->cur_trans =
|
|
list_entry(data->cur_trans->transfer_list.next,
|
|
struct spi_transfer, transfer_list);
|
|
dev_dbg(&data->master->dev,
|
|
"%s :Getting next transfer message\n",
|
|
__func__);
|
|
}
|
|
spin_unlock(&data->lock);
|
|
|
|
if (!data->cur_trans->len)
|
|
goto out;
|
|
cnt = (data->cur_trans->len - 1) / PCH_BUF_SIZE + 1;
|
|
data->save_total_len = data->cur_trans->len;
|
|
if (data->use_dma) {
|
|
int i;
|
|
char *save_rx_buf = data->cur_trans->rx_buf;
|
|
|
|
for (i = 0; i < cnt; i++) {
|
|
pch_spi_handle_dma(data, &bpw);
|
|
if (!pch_spi_start_transfer(data)) {
|
|
data->transfer_complete = true;
|
|
data->current_msg->status = -EIO;
|
|
data->current_msg->complete
|
|
(data->current_msg->context);
|
|
data->bcurrent_msg_processing = false;
|
|
data->current_msg = NULL;
|
|
data->cur_trans = NULL;
|
|
goto out;
|
|
}
|
|
pch_spi_copy_rx_data_for_dma(data, bpw);
|
|
}
|
|
data->cur_trans->rx_buf = save_rx_buf;
|
|
} else {
|
|
pch_spi_set_tx(data, &bpw);
|
|
pch_spi_set_ir(data);
|
|
pch_spi_copy_rx_data(data, bpw);
|
|
kfree(data->pkt_rx_buff);
|
|
data->pkt_rx_buff = NULL;
|
|
kfree(data->pkt_tx_buff);
|
|
data->pkt_tx_buff = NULL;
|
|
}
|
|
/* increment message count */
|
|
data->cur_trans->len = data->save_total_len;
|
|
data->current_msg->actual_length += data->cur_trans->len;
|
|
|
|
dev_dbg(&data->master->dev,
|
|
"%s:data->current_msg->actual_length=%d\n",
|
|
__func__, data->current_msg->actual_length);
|
|
|
|
spi_transfer_delay_exec(data->cur_trans);
|
|
|
|
spin_lock(&data->lock);
|
|
|
|
/* No more transfer in this message. */
|
|
if ((data->cur_trans->transfer_list.next) ==
|
|
&(data->current_msg->transfers)) {
|
|
pch_spi_nomore_transfer(data);
|
|
}
|
|
|
|
spin_unlock(&data->lock);
|
|
|
|
} while (data->cur_trans != NULL);
|
|
|
|
out:
|
|
pch_spi_writereg(data->master, PCH_SSNXCR, SSN_HIGH);
|
|
if (data->use_dma)
|
|
pch_spi_release_dma(data);
|
|
}
|
|
|
|
static void pch_spi_free_resources(struct pch_spi_board_data *board_dat,
|
|
struct pch_spi_data *data)
|
|
{
|
|
dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__);
|
|
|
|
flush_work(&data->work);
|
|
}
|
|
|
|
static int pch_spi_get_resources(struct pch_spi_board_data *board_dat,
|
|
struct pch_spi_data *data)
|
|
{
|
|
dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__);
|
|
|
|
/* reset PCH SPI h/w */
|
|
pch_spi_reset(data->master);
|
|
dev_dbg(&board_dat->pdev->dev,
|
|
"%s pch_spi_reset invoked successfully\n", __func__);
|
|
|
|
dev_dbg(&board_dat->pdev->dev, "%s data->irq_reg_sts=true\n", __func__);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pch_free_dma_buf(struct pch_spi_board_data *board_dat,
|
|
struct pch_spi_data *data)
|
|
{
|
|
struct pch_spi_dma_ctrl *dma;
|
|
|
|
dma = &data->dma;
|
|
if (dma->tx_buf_dma)
|
|
dma_free_coherent(&board_dat->pdev->dev, PCH_BUF_SIZE,
|
|
dma->tx_buf_virt, dma->tx_buf_dma);
|
|
if (dma->rx_buf_dma)
|
|
dma_free_coherent(&board_dat->pdev->dev, PCH_BUF_SIZE,
|
|
dma->rx_buf_virt, dma->rx_buf_dma);
|
|
}
|
|
|
|
static int pch_alloc_dma_buf(struct pch_spi_board_data *board_dat,
|
|
struct pch_spi_data *data)
|
|
{
|
|
struct pch_spi_dma_ctrl *dma;
|
|
int ret;
|
|
|
|
dma = &data->dma;
|
|
ret = 0;
|
|
/* Get Consistent memory for Tx DMA */
|
|
dma->tx_buf_virt = dma_alloc_coherent(&board_dat->pdev->dev,
|
|
PCH_BUF_SIZE, &dma->tx_buf_dma, GFP_KERNEL);
|
|
if (!dma->tx_buf_virt)
|
|
ret = -ENOMEM;
|
|
|
|
/* Get Consistent memory for Rx DMA */
|
|
dma->rx_buf_virt = dma_alloc_coherent(&board_dat->pdev->dev,
|
|
PCH_BUF_SIZE, &dma->rx_buf_dma, GFP_KERNEL);
|
|
if (!dma->rx_buf_virt)
|
|
ret = -ENOMEM;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int pch_spi_pd_probe(struct platform_device *plat_dev)
|
|
{
|
|
int ret;
|
|
struct spi_master *master;
|
|
struct pch_spi_board_data *board_dat = dev_get_platdata(&plat_dev->dev);
|
|
struct pch_spi_data *data;
|
|
|
|
dev_dbg(&plat_dev->dev, "%s:debug\n", __func__);
|
|
|
|
master = spi_alloc_master(&board_dat->pdev->dev,
|
|
sizeof(struct pch_spi_data));
|
|
if (!master) {
|
|
dev_err(&plat_dev->dev, "spi_alloc_master[%d] failed.\n",
|
|
plat_dev->id);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
data = spi_master_get_devdata(master);
|
|
data->master = master;
|
|
|
|
platform_set_drvdata(plat_dev, data);
|
|
|
|
/* baseaddress + address offset) */
|
|
data->io_base_addr = pci_resource_start(board_dat->pdev, 1) +
|
|
PCH_ADDRESS_SIZE * plat_dev->id;
|
|
data->io_remap_addr = pci_iomap(board_dat->pdev, 1, 0);
|
|
if (!data->io_remap_addr) {
|
|
dev_err(&plat_dev->dev, "%s pci_iomap failed\n", __func__);
|
|
ret = -ENOMEM;
|
|
goto err_pci_iomap;
|
|
}
|
|
data->io_remap_addr += PCH_ADDRESS_SIZE * plat_dev->id;
|
|
|
|
dev_dbg(&plat_dev->dev, "[ch%d] remap_addr=%p\n",
|
|
plat_dev->id, data->io_remap_addr);
|
|
|
|
/* initialize members of SPI master */
|
|
master->num_chipselect = PCH_MAX_CS;
|
|
master->transfer = pch_spi_transfer;
|
|
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
|
|
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
|
|
master->max_speed_hz = PCH_MAX_BAUDRATE;
|
|
master->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX;
|
|
|
|
data->board_dat = board_dat;
|
|
data->plat_dev = plat_dev;
|
|
data->n_curnt_chip = 255;
|
|
data->status = STATUS_RUNNING;
|
|
data->ch = plat_dev->id;
|
|
data->use_dma = use_dma;
|
|
|
|
INIT_LIST_HEAD(&data->queue);
|
|
spin_lock_init(&data->lock);
|
|
INIT_WORK(&data->work, pch_spi_process_messages);
|
|
init_waitqueue_head(&data->wait);
|
|
|
|
ret = pch_spi_get_resources(board_dat, data);
|
|
if (ret) {
|
|
dev_err(&plat_dev->dev, "%s fail(retval=%d)\n", __func__, ret);
|
|
goto err_spi_get_resources;
|
|
}
|
|
|
|
ret = request_irq(board_dat->pdev->irq, pch_spi_handler,
|
|
IRQF_SHARED, KBUILD_MODNAME, data);
|
|
if (ret) {
|
|
dev_err(&plat_dev->dev,
|
|
"%s request_irq failed\n", __func__);
|
|
goto err_request_irq;
|
|
}
|
|
data->irq_reg_sts = true;
|
|
|
|
pch_spi_set_master_mode(master);
|
|
|
|
if (use_dma) {
|
|
dev_info(&plat_dev->dev, "Use DMA for data transfers\n");
|
|
ret = pch_alloc_dma_buf(board_dat, data);
|
|
if (ret)
|
|
goto err_spi_register_master;
|
|
}
|
|
|
|
ret = spi_register_master(master);
|
|
if (ret != 0) {
|
|
dev_err(&plat_dev->dev,
|
|
"%s spi_register_master FAILED\n", __func__);
|
|
goto err_spi_register_master;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_spi_register_master:
|
|
pch_free_dma_buf(board_dat, data);
|
|
free_irq(board_dat->pdev->irq, data);
|
|
err_request_irq:
|
|
pch_spi_free_resources(board_dat, data);
|
|
err_spi_get_resources:
|
|
pci_iounmap(board_dat->pdev, data->io_remap_addr);
|
|
err_pci_iomap:
|
|
spi_master_put(master);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void pch_spi_pd_remove(struct platform_device *plat_dev)
|
|
{
|
|
struct pch_spi_board_data *board_dat = dev_get_platdata(&plat_dev->dev);
|
|
struct pch_spi_data *data = platform_get_drvdata(plat_dev);
|
|
int count;
|
|
unsigned long flags;
|
|
|
|
dev_dbg(&plat_dev->dev, "%s:[ch%d] irq=%d\n",
|
|
__func__, plat_dev->id, board_dat->pdev->irq);
|
|
|
|
if (use_dma)
|
|
pch_free_dma_buf(board_dat, data);
|
|
|
|
/* check for any pending messages; no action is taken if the queue
|
|
* is still full; but at least we tried. Unload anyway */
|
|
count = 500;
|
|
spin_lock_irqsave(&data->lock, flags);
|
|
data->status = STATUS_EXITING;
|
|
while ((list_empty(&data->queue) == 0) && --count) {
|
|
dev_dbg(&board_dat->pdev->dev, "%s :queue not empty\n",
|
|
__func__);
|
|
spin_unlock_irqrestore(&data->lock, flags);
|
|
msleep(PCH_SLEEP_TIME);
|
|
spin_lock_irqsave(&data->lock, flags);
|
|
}
|
|
spin_unlock_irqrestore(&data->lock, flags);
|
|
|
|
pch_spi_free_resources(board_dat, data);
|
|
/* disable interrupts & free IRQ */
|
|
if (data->irq_reg_sts) {
|
|
/* disable interrupts */
|
|
pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL);
|
|
data->irq_reg_sts = false;
|
|
free_irq(board_dat->pdev->irq, data);
|
|
}
|
|
|
|
pci_iounmap(board_dat->pdev, data->io_remap_addr);
|
|
spi_unregister_master(data->master);
|
|
}
|
|
#ifdef CONFIG_PM
|
|
static int pch_spi_pd_suspend(struct platform_device *pd_dev,
|
|
pm_message_t state)
|
|
{
|
|
u8 count;
|
|
struct pch_spi_board_data *board_dat = dev_get_platdata(&pd_dev->dev);
|
|
struct pch_spi_data *data = platform_get_drvdata(pd_dev);
|
|
|
|
dev_dbg(&pd_dev->dev, "%s ENTRY\n", __func__);
|
|
|
|
if (!board_dat) {
|
|
dev_err(&pd_dev->dev,
|
|
"%s pci_get_drvdata returned NULL\n", __func__);
|
|
return -EFAULT;
|
|
}
|
|
|
|
/* check if the current message is processed:
|
|
Only after thats done the transfer will be suspended */
|
|
count = 255;
|
|
while ((--count) > 0) {
|
|
if (!(data->bcurrent_msg_processing))
|
|
break;
|
|
msleep(PCH_SLEEP_TIME);
|
|
}
|
|
|
|
/* Free IRQ */
|
|
if (data->irq_reg_sts) {
|
|
/* disable all interrupts */
|
|
pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL);
|
|
pch_spi_reset(data->master);
|
|
free_irq(board_dat->pdev->irq, data);
|
|
|
|
data->irq_reg_sts = false;
|
|
dev_dbg(&pd_dev->dev,
|
|
"%s free_irq invoked successfully.\n", __func__);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pch_spi_pd_resume(struct platform_device *pd_dev)
|
|
{
|
|
struct pch_spi_board_data *board_dat = dev_get_platdata(&pd_dev->dev);
|
|
struct pch_spi_data *data = platform_get_drvdata(pd_dev);
|
|
int retval;
|
|
|
|
if (!board_dat) {
|
|
dev_err(&pd_dev->dev,
|
|
"%s pci_get_drvdata returned NULL\n", __func__);
|
|
return -EFAULT;
|
|
}
|
|
|
|
if (!data->irq_reg_sts) {
|
|
/* register IRQ */
|
|
retval = request_irq(board_dat->pdev->irq, pch_spi_handler,
|
|
IRQF_SHARED, KBUILD_MODNAME, data);
|
|
if (retval < 0) {
|
|
dev_err(&pd_dev->dev,
|
|
"%s request_irq failed\n", __func__);
|
|
return retval;
|
|
}
|
|
|
|
/* reset PCH SPI h/w */
|
|
pch_spi_reset(data->master);
|
|
pch_spi_set_master_mode(data->master);
|
|
data->irq_reg_sts = true;
|
|
}
|
|
return 0;
|
|
}
|
|
#else
|
|
#define pch_spi_pd_suspend NULL
|
|
#define pch_spi_pd_resume NULL
|
|
#endif
|
|
|
|
static struct platform_driver pch_spi_pd_driver = {
|
|
.driver = {
|
|
.name = "pch-spi",
|
|
},
|
|
.probe = pch_spi_pd_probe,
|
|
.remove_new = pch_spi_pd_remove,
|
|
.suspend = pch_spi_pd_suspend,
|
|
.resume = pch_spi_pd_resume
|
|
};
|
|
|
|
static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
struct pch_spi_board_data *board_dat;
|
|
struct platform_device *pd_dev = NULL;
|
|
int retval;
|
|
int i;
|
|
struct pch_pd_dev_save *pd_dev_save;
|
|
|
|
pd_dev_save = kzalloc(sizeof(*pd_dev_save), GFP_KERNEL);
|
|
if (!pd_dev_save)
|
|
return -ENOMEM;
|
|
|
|
board_dat = kzalloc(sizeof(*board_dat), GFP_KERNEL);
|
|
if (!board_dat) {
|
|
retval = -ENOMEM;
|
|
goto err_no_mem;
|
|
}
|
|
|
|
retval = pci_request_regions(pdev, KBUILD_MODNAME);
|
|
if (retval) {
|
|
dev_err(&pdev->dev, "%s request_region failed\n", __func__);
|
|
goto pci_request_regions;
|
|
}
|
|
|
|
board_dat->pdev = pdev;
|
|
board_dat->num = id->driver_data;
|
|
pd_dev_save->num = id->driver_data;
|
|
pd_dev_save->board_dat = board_dat;
|
|
|
|
retval = pci_enable_device(pdev);
|
|
if (retval) {
|
|
dev_err(&pdev->dev, "%s pci_enable_device failed\n", __func__);
|
|
goto pci_enable_device;
|
|
}
|
|
|
|
for (i = 0; i < board_dat->num; i++) {
|
|
pd_dev = platform_device_alloc("pch-spi", i);
|
|
if (!pd_dev) {
|
|
dev_err(&pdev->dev, "platform_device_alloc failed\n");
|
|
retval = -ENOMEM;
|
|
goto err_platform_device;
|
|
}
|
|
pd_dev_save->pd_save[i] = pd_dev;
|
|
pd_dev->dev.parent = &pdev->dev;
|
|
|
|
retval = platform_device_add_data(pd_dev, board_dat,
|
|
sizeof(*board_dat));
|
|
if (retval) {
|
|
dev_err(&pdev->dev,
|
|
"platform_device_add_data failed\n");
|
|
platform_device_put(pd_dev);
|
|
goto err_platform_device;
|
|
}
|
|
|
|
retval = platform_device_add(pd_dev);
|
|
if (retval) {
|
|
dev_err(&pdev->dev, "platform_device_add failed\n");
|
|
platform_device_put(pd_dev);
|
|
goto err_platform_device;
|
|
}
|
|
}
|
|
|
|
pci_set_drvdata(pdev, pd_dev_save);
|
|
|
|
return 0;
|
|
|
|
err_platform_device:
|
|
while (--i >= 0)
|
|
platform_device_unregister(pd_dev_save->pd_save[i]);
|
|
pci_disable_device(pdev);
|
|
pci_enable_device:
|
|
pci_release_regions(pdev);
|
|
pci_request_regions:
|
|
kfree(board_dat);
|
|
err_no_mem:
|
|
kfree(pd_dev_save);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static void pch_spi_remove(struct pci_dev *pdev)
|
|
{
|
|
int i;
|
|
struct pch_pd_dev_save *pd_dev_save = pci_get_drvdata(pdev);
|
|
|
|
dev_dbg(&pdev->dev, "%s ENTRY:pdev=%p\n", __func__, pdev);
|
|
|
|
for (i = 0; i < pd_dev_save->num; i++)
|
|
platform_device_unregister(pd_dev_save->pd_save[i]);
|
|
|
|
pci_disable_device(pdev);
|
|
pci_release_regions(pdev);
|
|
kfree(pd_dev_save->board_dat);
|
|
kfree(pd_dev_save);
|
|
}
|
|
|
|
static int __maybe_unused pch_spi_suspend(struct device *dev)
|
|
{
|
|
struct pch_pd_dev_save *pd_dev_save = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(dev, "%s ENTRY\n", __func__);
|
|
|
|
pd_dev_save->board_dat->suspend_sts = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused pch_spi_resume(struct device *dev)
|
|
{
|
|
struct pch_pd_dev_save *pd_dev_save = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(dev, "%s ENTRY\n", __func__);
|
|
|
|
/* set suspend status to false */
|
|
pd_dev_save->board_dat->suspend_sts = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(pch_spi_pm_ops, pch_spi_suspend, pch_spi_resume);
|
|
|
|
static struct pci_driver pch_spi_pcidev_driver = {
|
|
.name = "pch_spi",
|
|
.id_table = pch_spi_pcidev_id,
|
|
.probe = pch_spi_probe,
|
|
.remove = pch_spi_remove,
|
|
.driver.pm = &pch_spi_pm_ops,
|
|
};
|
|
|
|
static int __init pch_spi_init(void)
|
|
{
|
|
int ret;
|
|
ret = platform_driver_register(&pch_spi_pd_driver);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pci_register_driver(&pch_spi_pcidev_driver);
|
|
if (ret) {
|
|
platform_driver_unregister(&pch_spi_pd_driver);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
module_init(pch_spi_init);
|
|
|
|
static void __exit pch_spi_exit(void)
|
|
{
|
|
pci_unregister_driver(&pch_spi_pcidev_driver);
|
|
platform_driver_unregister(&pch_spi_pd_driver);
|
|
}
|
|
module_exit(pch_spi_exit);
|
|
|
|
module_param(use_dma, int, 0644);
|
|
MODULE_PARM_DESC(use_dma,
|
|
"to use DMA for data transfers pass 1 else 0; default 1");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semiconductor ML7xxx IOH SPI Driver");
|
|
MODULE_DEVICE_TABLE(pci, pch_spi_pcidev_id);
|
|
|