mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-27 13:05:03 +08:00
63e71fedc0
This patch adds support for the emtrion GmbH emCON-MX6 modules. They are available with imx.6 Solo, Dual-Lite, Dual and Quad equipped with Memory from 512MB to 2GB (configured by U-Boot). Our default developer-Kit ships with the Avari baseboard and the EDT ETM0700G0BDH6 Display (imx6[q|dl]-emcon-avari). The devicetree is split into the common part providing all module components and the basic support for all SoC versions (imx6qdl-emcon.dtsi) and parts which are i.mx6 S|DL and D|Q relevant. Finally the support for the avari baseboard in the developer-kit configuration is provided by the emcon-avari dts files. Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
178 lines
2.9 KiB
Plaintext
178 lines
2.9 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0 or MIT)
|
|
//
|
|
// Copyright (C) 2018 emtrion GmbH
|
|
//
|
|
|
|
/ {
|
|
aliases {
|
|
boardid = &boardid;
|
|
mmc0 = &usdhc3;
|
|
mmc1 = &usdhc2;
|
|
mmc2 = &usdhc1;
|
|
mmc3 = &usdhc4;
|
|
};
|
|
|
|
reg_wall_5p0: reg-wall5p0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "Main-Supply";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
reg_base3p3: reg-base3p3 {
|
|
compatible = "regulator-fixed";
|
|
vin-supply = <®_wall_5p0>;
|
|
regulator-name = "3V3-avari";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
reg_base1p5: reg-base1p5 {
|
|
compatible = "regulator-fixed";
|
|
vin-supply = <®_base3p3>;
|
|
regulator-name = "1V5-avari";
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
reg_usb_otg: reg-otgvbus {
|
|
compatible = "regulator-fixed";
|
|
vin-supply = <®_wall_5p0>;
|
|
regulator-name = "OTG_VBUS";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
clk_codec: clock-codec {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <12000000>;
|
|
};
|
|
|
|
sound {
|
|
compatible = "fsl,imx-audio-sgtl5000";
|
|
model = "emCON-avari-sgtl5000";
|
|
ssi-controller = <&ssi2>;
|
|
audio-codec = <&sgtl5000>;
|
|
audio-routing =
|
|
"Headphone Jack", "HP_OUT";
|
|
mux-int-port = <2>;
|
|
mux-ext-port = <3>;
|
|
};
|
|
};
|
|
|
|
&audmux {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_audmux>;
|
|
status = "okay";
|
|
};
|
|
|
|
&can1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&can2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ecspi2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
ddc-i2c-bus = <&i2c2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
status = "okay";
|
|
|
|
sgtl5000: audio-codec@a {
|
|
compatible = "fsl,sgtl5000";
|
|
reg = <0x0a>;
|
|
#sound-dai-cells = <0>;
|
|
clocks = <&clk_codec>;
|
|
VDDA-supply = <®_base3p3>;
|
|
VDDIO-supply = <®_base3p3>;
|
|
};
|
|
|
|
captouch: touchscreen@38 {
|
|
compatible = "edt,edt-ft5406";
|
|
reg = <0x38>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_irq_touch2 &pinctrl_emcon_gpio4>;
|
|
interrupt-parent = <&gpio6>;
|
|
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
|
|
wake-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
|
|
wakeup-source;
|
|
};
|
|
|
|
boardid: gpio@3a {
|
|
compatible = "nxp,pca8574";
|
|
reg = <0x3a>;
|
|
gpio-controller;
|
|
#gpio-cells = <1>;
|
|
};
|
|
};
|
|
|
|
&pcie {
|
|
status = "okay";
|
|
};
|
|
|
|
&rgb_encoder {
|
|
status = "okay";
|
|
};
|
|
|
|
&rgb_panel {
|
|
compatible = "edt,etm0700g0bdh6";
|
|
status = "okay";
|
|
};
|
|
|
|
&ssi2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
uart-has-rtscts;
|
|
};
|
|
|
|
&uart3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart4 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart5 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg {
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc1 {
|
|
status = "okay";
|
|
};
|