korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-16 08:44:21 +08:00
Code Issues Packages Projects Releases Wiki Activity
558d1de8ba
linux/arch/arm/mach-omap2/mmc-twl4030.c
Tony Lindgren 90c62bf08f omap mmc: Add low-level initialization for hsmmc controller 
Add low-level initialization for hsmmc controller. Merged into
this patch patch are various improvments and board support by
Grazvydas Ignotas and David Brownell.

Also change wire4 to be wires, as some newer controllers support
8 data lines.

Cc: Pierre Ossman <drzeus-mmc@drzeus.cx>
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10 17:37:17 -08:00

409 lines
9.5 KiB
C
Raw Blame History

/*
* linux/arch/arm/mach-omap2/mmc-twl4030.c
*
* Copyright (C) 2007-2008 Texas Instruments
* Copyright (C) 2008 Nokia Corporation
* Author: Texas Instruments
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/i2c/twl4030.h>
#include <mach/hardware.h>
#include <mach/control.h>
#include <mach/mmc.h>
#include <mach/board.h>
#include "mmc-twl4030.h"
#if defined(CONFIG_TWL4030_CORE) && \
(defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
#define LDO_CLR 0x00
#define VSEL_S2_CLR 0x40
#define VMMC1_DEV_GRP 0x27
#define VMMC1_CLR 0x00
#define VMMC1_315V 0x03
#define VMMC1_300V 0x02
#define VMMC1_285V 0x01
#define VMMC1_185V 0x00
#define VMMC1_DEDICATED 0x2A
#define VMMC2_DEV_GRP 0x2B
#define VMMC2_CLR 0x40
#define VMMC2_315V 0x0c
#define VMMC2_300V 0x0b
#define VMMC2_285V 0x0a
#define VMMC2_260V 0x08
#define VMMC2_185V 0x06
#define VMMC2_DEDICATED 0x2E
#define VMMC_DEV_GRP_P1 0x20
static u16 control_pbias_offset;
static u16 control_devconf1_offset;
#define HSMMC_NAME_LEN 9
static struct twl_mmc_controller {
struct omap_mmc_platform_data *mmc;
u8 twl_vmmc_dev_grp;
u8 twl_mmc_dedicated;
char name[HSMMC_NAME_LEN];
} hsmmc[] = {
{
.twl_vmmc_dev_grp = VMMC1_DEV_GRP,
.twl_mmc_dedicated = VMMC1_DEDICATED,
},
{
.twl_vmmc_dev_grp = VMMC2_DEV_GRP,
.twl_mmc_dedicated = VMMC2_DEDICATED,
},
};
static int twl_mmc_card_detect(int irq)
{
unsigned i;
for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
struct omap_mmc_platform_data *mmc;
mmc = hsmmc[i].mmc;
if (!mmc)
continue;
if (irq != mmc->slots[0].card_detect_irq)
continue;
/* NOTE: assumes card detect signal is active-low */
return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
}
return -ENOSYS;
}
static int twl_mmc_get_ro(struct device *dev, int slot)
{
struct omap_mmc_platform_data *mmc = dev->platform_data;
/* NOTE: assumes write protect signal is active-high */
return gpio_get_value_cansleep(mmc->slots[0].gpio_wp);
}
/*
* MMC Slot Initialization.
*/
static int twl_mmc_late_init(struct device *dev)
{
struct omap_mmc_platform_data *mmc = dev->platform_data;
int ret = 0;
int i;
ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
if (ret)
goto done;
ret = gpio_direction_input(mmc->slots[0].switch_pin);
if (ret)
goto err;
for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
if (hsmmc[i].name == mmc->slots[0].name) {
hsmmc[i].mmc = mmc;
break;
}
}
return 0;
err:
gpio_free(mmc->slots[0].switch_pin);
done:
mmc->slots[0].card_detect_irq = 0;
mmc->slots[0].card_detect = NULL;
dev_err(dev, "err %d configuring card detect\n", ret);
return ret;
}
static void twl_mmc_cleanup(struct device *dev)
{
struct omap_mmc_platform_data *mmc = dev->platform_data;
gpio_free(mmc->slots[0].switch_pin);
}
#ifdef CONFIG_PM
static int twl_mmc_suspend(struct device *dev, int slot)
{
struct omap_mmc_platform_data *mmc = dev->platform_data;
disable_irq(mmc->slots[0].card_detect_irq);
return 0;
}
static int twl_mmc_resume(struct device *dev, int slot)
{
struct omap_mmc_platform_data *mmc = dev->platform_data;
enable_irq(mmc->slots[0].card_detect_irq);
return 0;
}
#else
#define twl_mmc_suspend NULL
#define twl_mmc_resume NULL
#endif
/*
* Sets the MMC voltage in twl4030
*/
static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
{
int ret;
u8 vmmc, dev_grp_val;
switch (1 << vdd) {
case MMC_VDD_35_36:
case MMC_VDD_34_35:
case MMC_VDD_33_34:
case MMC_VDD_32_33:
case MMC_VDD_31_32:
case MMC_VDD_30_31:
if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
vmmc = VMMC1_315V;
else
vmmc = VMMC2_315V;
break;
case MMC_VDD_29_30:
if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
vmmc = VMMC1_315V;
else
vmmc = VMMC2_300V;
break;
case MMC_VDD_27_28:
case MMC_VDD_26_27:
if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
vmmc = VMMC1_285V;
else
vmmc = VMMC2_285V;
break;
case MMC_VDD_25_26:
case MMC_VDD_24_25:
case MMC_VDD_23_24:
case MMC_VDD_22_23:
case MMC_VDD_21_22:
case MMC_VDD_20_21:
if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
vmmc = VMMC1_285V;
else
vmmc = VMMC2_260V;
break;
case MMC_VDD_165_195:
if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
vmmc = VMMC1_185V;
else
vmmc = VMMC2_185V;
break;
default:
vmmc = 0;
break;
}
if (vmmc)
dev_grp_val = VMMC_DEV_GRP_P1; /* Power up */
else
dev_grp_val = LDO_CLR; /* Power down */
ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
dev_grp_val, c->twl_vmmc_dev_grp);
if (ret)
return ret;
ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
vmmc, c->twl_mmc_dedicated);
return ret;
}
static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
u32 reg;
int ret = 0;
struct twl_mmc_controller *c = &hsmmc[0];
struct omap_mmc_platform_data *mmc = dev->platform_data;
if (power_on) {
if (cpu_is_omap2430()) {
reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
if ((1 << vdd) >= MMC_VDD_30_31)
reg |= OMAP243X_MMC1_ACTIVE_OVERWRITE;
else
reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE;
omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
}
if (mmc->slots[0].internal_clock) {
reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
reg |= OMAP2_MMCSDIO1ADPCLKISEL;
omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
}
reg = omap_ctrl_readl(control_pbias_offset);
reg |= OMAP2_PBIASSPEEDCTRL0;
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
omap_ctrl_writel(reg, control_pbias_offset);
ret = twl_mmc_set_voltage(c, vdd);
/* 100ms delay required for PBIAS configuration */
msleep(100);
reg = omap_ctrl_readl(control_pbias_offset);
reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0);
if ((1 << vdd) <= MMC_VDD_165_195)
reg &= ~OMAP2_PBIASLITEVMODE0;
else
reg |= OMAP2_PBIASLITEVMODE0;
omap_ctrl_writel(reg, control_pbias_offset);
} else {
reg = omap_ctrl_readl(control_pbias_offset);
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
omap_ctrl_writel(reg, control_pbias_offset);
ret = twl_mmc_set_voltage(c, 0);
/* 100ms delay required for PBIAS configuration */
msleep(100);
reg = omap_ctrl_readl(control_pbias_offset);
reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 |
OMAP2_PBIASLITEVMODE0);
omap_ctrl_writel(reg, control_pbias_offset);
}
return ret;
}
static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vdd)
{
int ret;
struct twl_mmc_controller *c = &hsmmc[1];
struct omap_mmc_platform_data *mmc = dev->platform_data;
if (power_on) {
if (mmc->slots[0].internal_clock) {
u32 reg;
reg = omap_ctrl_readl(control_devconf1_offset);
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
omap_ctrl_writel(reg, control_devconf1_offset);
}
ret = twl_mmc_set_voltage(c, vdd);
} else {
ret = twl_mmc_set_voltage(c, 0);
}
return ret;
}
static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
{
struct twl4030_hsmmc_info *c;
int nr_hsmmc = ARRAY_SIZE(hsmmc_data);
if (cpu_is_omap2430()) {
control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1;
nr_hsmmc = 2;
} else {
control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1;
}
for (c = controllers; c->mmc; c++) {
struct twl_mmc_controller *twl = hsmmc + c->mmc - 1;
struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1];
if (!c->mmc || c->mmc > nr_hsmmc) {
pr_debug("MMC%d: no such controller\n", c->mmc);
continue;
}
if (mmc) {
pr_debug("MMC%d: already configured\n", c->mmc);
continue;
}
mmc = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
if (!mmc) {
pr_err("Cannot allocate memory for mmc device!\n");
return;
}
sprintf(twl->name, "mmc%islot%i", c->mmc, 1);
mmc->slots[0].name = twl->name;
mmc->nr_slots = 1;
mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
MMC_VDD_26_27 | MMC_VDD_27_28 |
MMC_VDD_29_30 |
MMC_VDD_30_31 | MMC_VDD_31_32;
mmc->slots[0].wires = c->wires;
mmc->slots[0].internal_clock = !c->ext_clock;
mmc->dma_mask = 0xffffffff;
/* note: twl4030 card detect GPIOs normally switch VMMCx ... */
if (gpio_is_valid(c->gpio_cd)) {
mmc->init = twl_mmc_late_init;
mmc->cleanup = twl_mmc_cleanup;
mmc->suspend = twl_mmc_suspend;
mmc->resume = twl_mmc_resume;
mmc->slots[0].switch_pin = c->gpio_cd;
mmc->slots[0].card_detect_irq = gpio_to_irq(c->gpio_cd);
mmc->slots[0].card_detect = twl_mmc_card_detect;
} else
mmc->slots[0].switch_pin = -EINVAL;
/* write protect normally uses an OMAP gpio */
if (gpio_is_valid(c->gpio_wp)) {
gpio_request(c->gpio_wp, "mmc_wp");
gpio_direction_input(c->gpio_wp);
mmc->slots[0].gpio_wp = c->gpio_wp;
mmc->slots[0].get_ro = twl_mmc_get_ro;
} else
mmc->slots[0].gpio_wp = -EINVAL;
/* NOTE: we assume OMAP's MMC1 and MMC2 use
* the TWL4030's VMMC1 and VMMC2, respectively;
* and that OMAP's MMC3 isn't used.
*/
switch (c->mmc) {
case 1:
mmc->slots[0].set_power = twl_mmc1_set_power;
break;
case 2:
mmc->slots[0].set_power = twl_mmc2_set_power;
break;
default:
pr_err("MMC%d configuration not supported!\n", c->mmc);
continue;
}
hsmmc_data[c->mmc - 1] = mmc;
}
omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC);
}
#endif
Reference in New Issue View Git Blame Copy Permalink