linux/arch/x86/kernel/relocate_kernel_64.S
Josh Poimboeuf fb799447ae x86,objtool: Split UNWIND_HINT_EMPTY in two
Mark reported that the ORC unwinder incorrectly marks an unwind as
reliable when the unwind terminates prematurely in the dark corners of
return_to_handler() due to lack of information about the next frame.

The problem is UNWIND_HINT_EMPTY is used in two different situations:

  1) The end of the kernel stack unwind before hitting user entry, boot
     code, or fork entry

  2) A blind spot in ORC coverage where the unwinder has to bail due to
     lack of information about the next frame

The ORC unwinder has no way to tell the difference between the two.
When it encounters an undefined stack state with 'end=1', it blindly
marks the stack reliable, which can break the livepatch consistency
model.

Fix it by splitting UNWIND_HINT_EMPTY into UNWIND_HINT_UNDEFINED and
UNWIND_HINT_END_OF_STACK.

Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/fd6212c8b450d3564b855e1cb48404d6277b4d9f.1677683419.git.jpoimboe@kernel.org
2023-03-23 23:18:58 +01:00

318 lines
6.5 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* relocate_kernel.S - put the kernel image in place to boot
* Copyright (C) 2002-2005 Eric Biederman <ebiederm@xmission.com>
*/
#include <linux/linkage.h>
#include <asm/page_types.h>
#include <asm/kexec.h>
#include <asm/processor-flags.h>
#include <asm/pgtable_types.h>
#include <asm/nospec-branch.h>
#include <asm/unwind_hints.h>
/*
* Must be relocatable PIC code callable as a C function, in particular
* there must be a plain RET and not jump to return thunk.
*/
#define PTR(x) (x << 3)
#define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
/*
* control_page + KEXEC_CONTROL_CODE_MAX_SIZE
* ~ control_page + PAGE_SIZE are used as data storage and stack for
* jumping back
*/
#define DATA(offset) (KEXEC_CONTROL_CODE_MAX_SIZE+(offset))
/* Minimal CPU state */
#define RSP DATA(0x0)
#define CR0 DATA(0x8)
#define CR3 DATA(0x10)
#define CR4 DATA(0x18)
/* other data */
#define CP_PA_TABLE_PAGE DATA(0x20)
#define CP_PA_SWAP_PAGE DATA(0x28)
#define CP_PA_BACKUP_PAGES_MAP DATA(0x30)
.text
.align PAGE_SIZE
.code64
SYM_CODE_START_NOALIGN(relocate_range)
SYM_CODE_START_NOALIGN(relocate_kernel)
UNWIND_HINT_END_OF_STACK
ANNOTATE_NOENDBR
/*
* %rdi indirection_page
* %rsi page_list
* %rdx start address
* %rcx preserve_context
* %r8 host_mem_enc_active
*/
/* Save the CPU context, used for jumping back */
pushq %rbx
pushq %rbp
pushq %r12
pushq %r13
pushq %r14
pushq %r15
pushf
movq PTR(VA_CONTROL_PAGE)(%rsi), %r11
movq %rsp, RSP(%r11)
movq %cr0, %rax
movq %rax, CR0(%r11)
movq %cr3, %rax
movq %rax, CR3(%r11)
movq %cr4, %rax
movq %rax, CR4(%r11)
/* Save CR4. Required to enable the right paging mode later. */
movq %rax, %r13
/* zero out flags, and disable interrupts */
pushq $0
popfq
/* Save SME active flag */
movq %r8, %r12
/*
* get physical address of control page now
* this is impossible after page table switch
*/
movq PTR(PA_CONTROL_PAGE)(%rsi), %r8
/* get physical address of page table now too */
movq PTR(PA_TABLE_PAGE)(%rsi), %r9
/* get physical address of swap page now */
movq PTR(PA_SWAP_PAGE)(%rsi), %r10
/* save some information for jumping back */
movq %r9, CP_PA_TABLE_PAGE(%r11)
movq %r10, CP_PA_SWAP_PAGE(%r11)
movq %rdi, CP_PA_BACKUP_PAGES_MAP(%r11)
/* Switch to the identity mapped page tables */
movq %r9, %cr3
/* setup a new stack at the end of the physical control page */
lea PAGE_SIZE(%r8), %rsp
/* jump to identity mapped page */
addq $(identity_mapped - relocate_kernel), %r8
pushq %r8
ANNOTATE_UNRET_SAFE
ret
int3
SYM_CODE_END(relocate_kernel)
SYM_CODE_START_LOCAL_NOALIGN(identity_mapped)
UNWIND_HINT_END_OF_STACK
/* set return address to 0 if not preserving context */
pushq $0
/* store the start address on the stack */
pushq %rdx
/*
* Clear X86_CR4_CET (if it was set) such that we can clear CR0_WP
* below.
*/
movq %cr4, %rax
andq $~(X86_CR4_CET), %rax
movq %rax, %cr4
/*
* Set cr0 to a known state:
* - Paging enabled
* - Alignment check disabled
* - Write protect disabled
* - No task switch
* - Don't do FP software emulation.
* - Protected mode enabled
*/
movq %cr0, %rax
andq $~(X86_CR0_AM | X86_CR0_WP | X86_CR0_TS | X86_CR0_EM), %rax
orl $(X86_CR0_PG | X86_CR0_PE), %eax
movq %rax, %cr0
/*
* Set cr4 to a known state:
* - physical address extension enabled
* - 5-level paging, if it was enabled before
*/
movl $X86_CR4_PAE, %eax
testq $X86_CR4_LA57, %r13
jz 1f
orl $X86_CR4_LA57, %eax
1:
movq %rax, %cr4
jmp 1f
1:
/* Flush the TLB (needed?) */
movq %r9, %cr3
/*
* If SME is active, there could be old encrypted cache line
* entries that will conflict with the now unencrypted memory
* used by kexec. Flush the caches before copying the kernel.
*/
testq %r12, %r12
jz 1f
wbinvd
1:
movq %rcx, %r11
call swap_pages
/*
* To be certain of avoiding problems with self-modifying code
* I need to execute a serializing instruction here.
* So I flush the TLB by reloading %cr3 here, it's handy,
* and not processor dependent.
*/
movq %cr3, %rax
movq %rax, %cr3
/*
* set all of the registers to known values
* leave %rsp alone
*/
testq %r11, %r11
jnz 1f
xorl %eax, %eax
xorl %ebx, %ebx
xorl %ecx, %ecx
xorl %edx, %edx
xorl %esi, %esi
xorl %edi, %edi
xorl %ebp, %ebp
xorl %r8d, %r8d
xorl %r9d, %r9d
xorl %r10d, %r10d
xorl %r11d, %r11d
xorl %r12d, %r12d
xorl %r13d, %r13d
xorl %r14d, %r14d
xorl %r15d, %r15d
ANNOTATE_UNRET_SAFE
ret
int3
1:
popq %rdx
leaq PAGE_SIZE(%r10), %rsp
ANNOTATE_RETPOLINE_SAFE
call *%rdx
/* get the re-entry point of the peer system */
movq 0(%rsp), %rbp
leaq relocate_kernel(%rip), %r8
movq CP_PA_SWAP_PAGE(%r8), %r10
movq CP_PA_BACKUP_PAGES_MAP(%r8), %rdi
movq CP_PA_TABLE_PAGE(%r8), %rax
movq %rax, %cr3
lea PAGE_SIZE(%r8), %rsp
call swap_pages
movq $virtual_mapped, %rax
pushq %rax
ANNOTATE_UNRET_SAFE
ret
int3
SYM_CODE_END(identity_mapped)
SYM_CODE_START_LOCAL_NOALIGN(virtual_mapped)
UNWIND_HINT_END_OF_STACK
ANNOTATE_NOENDBR // RET target, above
movq RSP(%r8), %rsp
movq CR4(%r8), %rax
movq %rax, %cr4
movq CR3(%r8), %rax
movq CR0(%r8), %r8
movq %rax, %cr3
movq %r8, %cr0
movq %rbp, %rax
popf
popq %r15
popq %r14
popq %r13
popq %r12
popq %rbp
popq %rbx
ANNOTATE_UNRET_SAFE
ret
int3
SYM_CODE_END(virtual_mapped)
/* Do the copies */
SYM_CODE_START_LOCAL_NOALIGN(swap_pages)
UNWIND_HINT_END_OF_STACK
movq %rdi, %rcx /* Put the page_list in %rcx */
xorl %edi, %edi
xorl %esi, %esi
jmp 1f
0: /* top, read another word for the indirection page */
movq (%rbx), %rcx
addq $8, %rbx
1:
testb $0x1, %cl /* is it a destination page? */
jz 2f
movq %rcx, %rdi
andq $0xfffffffffffff000, %rdi
jmp 0b
2:
testb $0x2, %cl /* is it an indirection page? */
jz 2f
movq %rcx, %rbx
andq $0xfffffffffffff000, %rbx
jmp 0b
2:
testb $0x4, %cl /* is it the done indicator? */
jz 2f
jmp 3f
2:
testb $0x8, %cl /* is it the source indicator? */
jz 0b /* Ignore it otherwise */
movq %rcx, %rsi /* For ever source page do a copy */
andq $0xfffffffffffff000, %rsi
movq %rdi, %rdx
movq %rsi, %rax
movq %r10, %rdi
movl $512, %ecx
rep ; movsq
movq %rax, %rdi
movq %rdx, %rsi
movl $512, %ecx
rep ; movsq
movq %rdx, %rdi
movq %r10, %rsi
movl $512, %ecx
rep ; movsq
lea PAGE_SIZE(%rax), %rsi
jmp 0b
3:
ANNOTATE_UNRET_SAFE
ret
int3
SYM_CODE_END(swap_pages)
.skip KEXEC_CONTROL_CODE_MAX_SIZE - (. - relocate_kernel), 0xcc
SYM_CODE_END(relocate_range);