Bruce Allan 52a9b23196 e1000e: s/w initiated LSC MSI-X interrupts not generated; no transmit ... In MSI-X mode when an IMPI SoL session was active (i.e. the PHY reset was blocked), the LSC interrupt generated by s/w to start the watchdog which started the transmitter was not getting fired by the hardware because bit 24 (the 'other' cause bit) also needed to be set. Without an active SoL session, the PHY was reset which caused the h/w to fire the LSC interrupt. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2010-05-12 23:31:10 -07:00
..
82571.c	e1000e: increase rx fifo size to 36K on 82574 and 82583	2010-05-05 21:15:31 -07:00
defines.h	e1000e: initialize manageability (IPMI) pass-through in 82574/82583	2010-05-12 23:31:10 -07:00
e1000.h	e1000e: save skb counts in TX to avoid cache misses	2010-05-05 21:11:25 -07:00
es2lan.c	e1000e: provide MAC-family-specific function to set LAN ID	2010-01-13 20:31:57 -08:00
ethtool.c	e1000e: bad state after running ethtool diagnostics with AMT enabled	2010-05-12 23:31:09 -07:00
hw.h	e1000e: initialize manageability (IPMI) pass-through in 82574/82583	2010-05-12 23:31:10 -07:00
ich8lan.c	e1000e: Reset 82577/82578 PHY before first PHY register read	2010-05-06 01:31:28 -07:00
lib.c	e1000e: typo corrections	2010-03-30 23:02:27 -07:00
Makefile	e1000e: reformat comment blocks, cosmetic changes only	2008-03-28 22:14:56 -04:00
netdev.c	e1000e: s/w initiated LSC MSI-X interrupts not generated; no transmit	2010-05-12 23:31:10 -07:00
param.c	e1000e: use static params to save stack space (part 2)	2010-05-12 23:31:09 -07:00
phy.c	e1000e: MDIO slow mode should always be done for 82577	2010-01-13 17:12:46 -08:00