mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-23 19:14:30 +08:00
ee0e87b174
The older add_mtd_device()/add_mtd_partitions() and their removal counterparts will soon be gone. Replace uses with mtd_device_register() and mtd_device_unregister(). Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
565 lines
14 KiB
C
565 lines
14 KiB
C
/*
|
|
* linux/drivers/mtd/onenand/onenand_sim.c
|
|
*
|
|
* The OneNAND simulator
|
|
*
|
|
* Copyright © 2005-2007 Samsung Electronics
|
|
* Kyungmin Park <kyungmin.park@samsung.com>
|
|
*
|
|
* Vishak G <vishak.g at samsung.com>, Rohit Hagargundgi <h.rohit at samsung.com>
|
|
* Flex-OneNAND simulator support
|
|
* Copyright (C) Samsung Electronics, 2008
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/onenand.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
#ifndef CONFIG_ONENAND_SIM_MANUFACTURER
|
|
#define CONFIG_ONENAND_SIM_MANUFACTURER 0xec
|
|
#endif
|
|
|
|
#ifndef CONFIG_ONENAND_SIM_DEVICE_ID
|
|
#define CONFIG_ONENAND_SIM_DEVICE_ID 0x04
|
|
#endif
|
|
|
|
#define CONFIG_FLEXONENAND ((CONFIG_ONENAND_SIM_DEVICE_ID >> 9) & 1)
|
|
|
|
#ifndef CONFIG_ONENAND_SIM_VERSION_ID
|
|
#define CONFIG_ONENAND_SIM_VERSION_ID 0x1e
|
|
#endif
|
|
|
|
#ifndef CONFIG_ONENAND_SIM_TECHNOLOGY_ID
|
|
#define CONFIG_ONENAND_SIM_TECHNOLOGY_ID CONFIG_FLEXONENAND
|
|
#endif
|
|
|
|
/* Initial boundary values for Flex-OneNAND Simulator */
|
|
#ifndef CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY
|
|
#define CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY 0x01
|
|
#endif
|
|
|
|
#ifndef CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY
|
|
#define CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY 0x01
|
|
#endif
|
|
|
|
static int manuf_id = CONFIG_ONENAND_SIM_MANUFACTURER;
|
|
static int device_id = CONFIG_ONENAND_SIM_DEVICE_ID;
|
|
static int version_id = CONFIG_ONENAND_SIM_VERSION_ID;
|
|
static int technology_id = CONFIG_ONENAND_SIM_TECHNOLOGY_ID;
|
|
static int boundary[] = {
|
|
CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY,
|
|
CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY,
|
|
};
|
|
|
|
struct onenand_flash {
|
|
void __iomem *base;
|
|
void __iomem *data;
|
|
};
|
|
|
|
#define ONENAND_CORE(flash) (flash->data)
|
|
#define ONENAND_CORE_SPARE(flash, this, offset) \
|
|
((flash->data) + (this->chipsize) + (offset >> 5))
|
|
|
|
#define ONENAND_MAIN_AREA(this, offset) \
|
|
(this->base + ONENAND_DATARAM + offset)
|
|
|
|
#define ONENAND_SPARE_AREA(this, offset) \
|
|
(this->base + ONENAND_SPARERAM + offset)
|
|
|
|
#define ONENAND_GET_WP_STATUS(this) \
|
|
(readw(this->base + ONENAND_REG_WP_STATUS))
|
|
|
|
#define ONENAND_SET_WP_STATUS(v, this) \
|
|
(writew(v, this->base + ONENAND_REG_WP_STATUS))
|
|
|
|
/* It has all 0xff chars */
|
|
#define MAX_ONENAND_PAGESIZE (4096 + 128)
|
|
static unsigned char *ffchars;
|
|
|
|
#if CONFIG_FLEXONENAND
|
|
#define PARTITION_NAME "Flex-OneNAND simulator partition"
|
|
#else
|
|
#define PARTITION_NAME "OneNAND simulator partition"
|
|
#endif
|
|
|
|
static struct mtd_partition os_partitions[] = {
|
|
{
|
|
.name = PARTITION_NAME,
|
|
.offset = 0,
|
|
.size = MTDPART_SIZ_FULL,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* OneNAND simulator mtd
|
|
*/
|
|
struct onenand_info {
|
|
struct mtd_info mtd;
|
|
struct mtd_partition *parts;
|
|
struct onenand_chip onenand;
|
|
struct onenand_flash flash;
|
|
};
|
|
|
|
static struct onenand_info *info;
|
|
|
|
#define DPRINTK(format, args...) \
|
|
do { \
|
|
printk(KERN_DEBUG "%s[%d]: " format "\n", __func__, \
|
|
__LINE__, ##args); \
|
|
} while (0)
|
|
|
|
/**
|
|
* onenand_lock_handle - Handle Lock scheme
|
|
* @this: OneNAND device structure
|
|
* @cmd: The command to be sent
|
|
*
|
|
* Send lock command to OneNAND device.
|
|
* The lock scheme depends on chip type.
|
|
*/
|
|
static void onenand_lock_handle(struct onenand_chip *this, int cmd)
|
|
{
|
|
int block_lock_scheme;
|
|
int status;
|
|
|
|
status = ONENAND_GET_WP_STATUS(this);
|
|
block_lock_scheme = !(this->options & ONENAND_HAS_CONT_LOCK);
|
|
|
|
switch (cmd) {
|
|
case ONENAND_CMD_UNLOCK:
|
|
case ONENAND_CMD_UNLOCK_ALL:
|
|
if (block_lock_scheme)
|
|
ONENAND_SET_WP_STATUS(ONENAND_WP_US, this);
|
|
else
|
|
ONENAND_SET_WP_STATUS(status | ONENAND_WP_US, this);
|
|
break;
|
|
|
|
case ONENAND_CMD_LOCK:
|
|
if (block_lock_scheme)
|
|
ONENAND_SET_WP_STATUS(ONENAND_WP_LS, this);
|
|
else
|
|
ONENAND_SET_WP_STATUS(status | ONENAND_WP_LS, this);
|
|
break;
|
|
|
|
case ONENAND_CMD_LOCK_TIGHT:
|
|
if (block_lock_scheme)
|
|
ONENAND_SET_WP_STATUS(ONENAND_WP_LTS, this);
|
|
else
|
|
ONENAND_SET_WP_STATUS(status | ONENAND_WP_LTS, this);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* onenand_bootram_handle - Handle BootRAM area
|
|
* @this: OneNAND device structure
|
|
* @cmd: The command to be sent
|
|
*
|
|
* Emulate BootRAM area. It is possible to do basic operation using BootRAM.
|
|
*/
|
|
static void onenand_bootram_handle(struct onenand_chip *this, int cmd)
|
|
{
|
|
switch (cmd) {
|
|
case ONENAND_CMD_READID:
|
|
writew(manuf_id, this->base);
|
|
writew(device_id, this->base + 2);
|
|
writew(version_id, this->base + 4);
|
|
break;
|
|
|
|
default:
|
|
/* REVIST: Handle other commands */
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* onenand_update_interrupt - Set interrupt register
|
|
* @this: OneNAND device structure
|
|
* @cmd: The command to be sent
|
|
*
|
|
* Update interrupt register. The status depends on command.
|
|
*/
|
|
static void onenand_update_interrupt(struct onenand_chip *this, int cmd)
|
|
{
|
|
int interrupt = ONENAND_INT_MASTER;
|
|
|
|
switch (cmd) {
|
|
case ONENAND_CMD_READ:
|
|
case ONENAND_CMD_READOOB:
|
|
interrupt |= ONENAND_INT_READ;
|
|
break;
|
|
|
|
case ONENAND_CMD_PROG:
|
|
case ONENAND_CMD_PROGOOB:
|
|
interrupt |= ONENAND_INT_WRITE;
|
|
break;
|
|
|
|
case ONENAND_CMD_ERASE:
|
|
interrupt |= ONENAND_INT_ERASE;
|
|
break;
|
|
|
|
case ONENAND_CMD_RESET:
|
|
interrupt |= ONENAND_INT_RESET;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
writew(interrupt, this->base + ONENAND_REG_INTERRUPT);
|
|
}
|
|
|
|
/**
|
|
* onenand_check_overwrite - Check if over-write happened
|
|
* @dest: The destination pointer
|
|
* @src: The source pointer
|
|
* @count: The length to be check
|
|
*
|
|
* Returns: 0 on same, otherwise 1
|
|
*
|
|
* Compare the source with destination
|
|
*/
|
|
static int onenand_check_overwrite(void *dest, void *src, size_t count)
|
|
{
|
|
unsigned int *s = (unsigned int *) src;
|
|
unsigned int *d = (unsigned int *) dest;
|
|
int i;
|
|
|
|
count >>= 2;
|
|
for (i = 0; i < count; i++)
|
|
if ((*s++ ^ *d++) != 0)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* onenand_data_handle - Handle OneNAND Core and DataRAM
|
|
* @this: OneNAND device structure
|
|
* @cmd: The command to be sent
|
|
* @dataram: Which dataram used
|
|
* @offset: The offset to OneNAND Core
|
|
*
|
|
* Copy data from OneNAND Core to DataRAM (read)
|
|
* Copy data from DataRAM to OneNAND Core (write)
|
|
* Erase the OneNAND Core (erase)
|
|
*/
|
|
static void onenand_data_handle(struct onenand_chip *this, int cmd,
|
|
int dataram, unsigned int offset)
|
|
{
|
|
struct mtd_info *mtd = &info->mtd;
|
|
struct onenand_flash *flash = this->priv;
|
|
int main_offset, spare_offset, die = 0;
|
|
void __iomem *src;
|
|
void __iomem *dest;
|
|
unsigned int i;
|
|
static int pi_operation;
|
|
int erasesize, rgn;
|
|
|
|
if (dataram) {
|
|
main_offset = mtd->writesize;
|
|
spare_offset = mtd->oobsize;
|
|
} else {
|
|
main_offset = 0;
|
|
spare_offset = 0;
|
|
}
|
|
|
|
if (pi_operation) {
|
|
die = readw(this->base + ONENAND_REG_START_ADDRESS2);
|
|
die >>= ONENAND_DDP_SHIFT;
|
|
}
|
|
|
|
switch (cmd) {
|
|
case FLEXONENAND_CMD_PI_ACCESS:
|
|
pi_operation = 1;
|
|
break;
|
|
|
|
case ONENAND_CMD_RESET:
|
|
pi_operation = 0;
|
|
break;
|
|
|
|
case ONENAND_CMD_READ:
|
|
src = ONENAND_CORE(flash) + offset;
|
|
dest = ONENAND_MAIN_AREA(this, main_offset);
|
|
if (pi_operation) {
|
|
writew(boundary[die], this->base + ONENAND_DATARAM);
|
|
break;
|
|
}
|
|
memcpy(dest, src, mtd->writesize);
|
|
/* Fall through */
|
|
|
|
case ONENAND_CMD_READOOB:
|
|
src = ONENAND_CORE_SPARE(flash, this, offset);
|
|
dest = ONENAND_SPARE_AREA(this, spare_offset);
|
|
memcpy(dest, src, mtd->oobsize);
|
|
break;
|
|
|
|
case ONENAND_CMD_PROG:
|
|
src = ONENAND_MAIN_AREA(this, main_offset);
|
|
dest = ONENAND_CORE(flash) + offset;
|
|
if (pi_operation) {
|
|
boundary[die] = readw(this->base + ONENAND_DATARAM);
|
|
break;
|
|
}
|
|
/* To handle partial write */
|
|
for (i = 0; i < (1 << mtd->subpage_sft); i++) {
|
|
int off = i * this->subpagesize;
|
|
if (!memcmp(src + off, ffchars, this->subpagesize))
|
|
continue;
|
|
if (memcmp(dest + off, ffchars, this->subpagesize) &&
|
|
onenand_check_overwrite(dest + off, src + off, this->subpagesize))
|
|
printk(KERN_ERR "over-write happened at 0x%08x\n", offset);
|
|
memcpy(dest + off, src + off, this->subpagesize);
|
|
}
|
|
/* Fall through */
|
|
|
|
case ONENAND_CMD_PROGOOB:
|
|
src = ONENAND_SPARE_AREA(this, spare_offset);
|
|
/* Check all data is 0xff chars */
|
|
if (!memcmp(src, ffchars, mtd->oobsize))
|
|
break;
|
|
|
|
dest = ONENAND_CORE_SPARE(flash, this, offset);
|
|
if (memcmp(dest, ffchars, mtd->oobsize) &&
|
|
onenand_check_overwrite(dest, src, mtd->oobsize))
|
|
printk(KERN_ERR "OOB: over-write happened at 0x%08x\n",
|
|
offset);
|
|
memcpy(dest, src, mtd->oobsize);
|
|
break;
|
|
|
|
case ONENAND_CMD_ERASE:
|
|
if (pi_operation)
|
|
break;
|
|
|
|
if (FLEXONENAND(this)) {
|
|
rgn = flexonenand_region(mtd, offset);
|
|
erasesize = mtd->eraseregions[rgn].erasesize;
|
|
} else
|
|
erasesize = mtd->erasesize;
|
|
|
|
memset(ONENAND_CORE(flash) + offset, 0xff, erasesize);
|
|
memset(ONENAND_CORE_SPARE(flash, this, offset), 0xff,
|
|
(erasesize >> 5));
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* onenand_command_handle - Handle command
|
|
* @this: OneNAND device structure
|
|
* @cmd: The command to be sent
|
|
*
|
|
* Emulate OneNAND command.
|
|
*/
|
|
static void onenand_command_handle(struct onenand_chip *this, int cmd)
|
|
{
|
|
unsigned long offset = 0;
|
|
int block = -1, page = -1, bufferram = -1;
|
|
int dataram = 0;
|
|
|
|
switch (cmd) {
|
|
case ONENAND_CMD_UNLOCK:
|
|
case ONENAND_CMD_LOCK:
|
|
case ONENAND_CMD_LOCK_TIGHT:
|
|
case ONENAND_CMD_UNLOCK_ALL:
|
|
onenand_lock_handle(this, cmd);
|
|
break;
|
|
|
|
case ONENAND_CMD_BUFFERRAM:
|
|
/* Do nothing */
|
|
return;
|
|
|
|
default:
|
|
block = (int) readw(this->base + ONENAND_REG_START_ADDRESS1);
|
|
if (block & (1 << ONENAND_DDP_SHIFT)) {
|
|
block &= ~(1 << ONENAND_DDP_SHIFT);
|
|
/* The half of chip block */
|
|
block += this->chipsize >> (this->erase_shift + 1);
|
|
}
|
|
if (cmd == ONENAND_CMD_ERASE)
|
|
break;
|
|
|
|
page = (int) readw(this->base + ONENAND_REG_START_ADDRESS8);
|
|
page = (page >> ONENAND_FPA_SHIFT);
|
|
bufferram = (int) readw(this->base + ONENAND_REG_START_BUFFER);
|
|
bufferram >>= ONENAND_BSA_SHIFT;
|
|
bufferram &= ONENAND_BSA_DATARAM1;
|
|
dataram = (bufferram == ONENAND_BSA_DATARAM1) ? 1 : 0;
|
|
break;
|
|
}
|
|
|
|
if (block != -1)
|
|
offset = onenand_addr(this, block);
|
|
|
|
if (page != -1)
|
|
offset += page << this->page_shift;
|
|
|
|
onenand_data_handle(this, cmd, dataram, offset);
|
|
|
|
onenand_update_interrupt(this, cmd);
|
|
}
|
|
|
|
/**
|
|
* onenand_writew - [OneNAND Interface] Emulate write operation
|
|
* @value: value to write
|
|
* @addr: address to write
|
|
*
|
|
* Write OneNAND register with value
|
|
*/
|
|
static void onenand_writew(unsigned short value, void __iomem * addr)
|
|
{
|
|
struct onenand_chip *this = info->mtd.priv;
|
|
|
|
/* BootRAM handling */
|
|
if (addr < this->base + ONENAND_DATARAM) {
|
|
onenand_bootram_handle(this, value);
|
|
return;
|
|
}
|
|
/* Command handling */
|
|
if (addr == this->base + ONENAND_REG_COMMAND)
|
|
onenand_command_handle(this, value);
|
|
|
|
writew(value, addr);
|
|
}
|
|
|
|
/**
|
|
* flash_init - Initialize OneNAND simulator
|
|
* @flash: OneNAND simulator data strucutres
|
|
*
|
|
* Initialize OneNAND simulator.
|
|
*/
|
|
static int __init flash_init(struct onenand_flash *flash)
|
|
{
|
|
int density, size;
|
|
int buffer_size;
|
|
|
|
flash->base = kzalloc(131072, GFP_KERNEL);
|
|
if (!flash->base) {
|
|
printk(KERN_ERR "Unable to allocate base address.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
density = device_id >> ONENAND_DEVICE_DENSITY_SHIFT;
|
|
density &= ONENAND_DEVICE_DENSITY_MASK;
|
|
size = ((16 << 20) << density);
|
|
|
|
ONENAND_CORE(flash) = vmalloc(size + (size >> 5));
|
|
if (!ONENAND_CORE(flash)) {
|
|
printk(KERN_ERR "Unable to allocate nand core address.\n");
|
|
kfree(flash->base);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(ONENAND_CORE(flash), 0xff, size + (size >> 5));
|
|
|
|
/* Setup registers */
|
|
writew(manuf_id, flash->base + ONENAND_REG_MANUFACTURER_ID);
|
|
writew(device_id, flash->base + ONENAND_REG_DEVICE_ID);
|
|
writew(version_id, flash->base + ONENAND_REG_VERSION_ID);
|
|
writew(technology_id, flash->base + ONENAND_REG_TECHNOLOGY);
|
|
|
|
if (density < 2 && (!CONFIG_FLEXONENAND))
|
|
buffer_size = 0x0400; /* 1KiB page */
|
|
else
|
|
buffer_size = 0x0800; /* 2KiB page */
|
|
writew(buffer_size, flash->base + ONENAND_REG_DATA_BUFFER_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* flash_exit - Clean up OneNAND simulator
|
|
* @flash: OneNAND simulator data structures
|
|
*
|
|
* Clean up OneNAND simulator.
|
|
*/
|
|
static void flash_exit(struct onenand_flash *flash)
|
|
{
|
|
vfree(ONENAND_CORE(flash));
|
|
kfree(flash->base);
|
|
}
|
|
|
|
static int __init onenand_sim_init(void)
|
|
{
|
|
/* Allocate all 0xff chars pointer */
|
|
ffchars = kmalloc(MAX_ONENAND_PAGESIZE, GFP_KERNEL);
|
|
if (!ffchars) {
|
|
printk(KERN_ERR "Unable to allocate ff chars.\n");
|
|
return -ENOMEM;
|
|
}
|
|
memset(ffchars, 0xff, MAX_ONENAND_PAGESIZE);
|
|
|
|
/* Allocate OneNAND simulator mtd pointer */
|
|
info = kzalloc(sizeof(struct onenand_info), GFP_KERNEL);
|
|
if (!info) {
|
|
printk(KERN_ERR "Unable to allocate core structures.\n");
|
|
kfree(ffchars);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Override write_word function */
|
|
info->onenand.write_word = onenand_writew;
|
|
|
|
if (flash_init(&info->flash)) {
|
|
printk(KERN_ERR "Unable to allocate flash.\n");
|
|
kfree(ffchars);
|
|
kfree(info);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
info->parts = os_partitions;
|
|
|
|
info->onenand.base = info->flash.base;
|
|
info->onenand.priv = &info->flash;
|
|
|
|
info->mtd.name = "OneNAND simulator";
|
|
info->mtd.priv = &info->onenand;
|
|
info->mtd.owner = THIS_MODULE;
|
|
|
|
if (onenand_scan(&info->mtd, 1)) {
|
|
flash_exit(&info->flash);
|
|
kfree(ffchars);
|
|
kfree(info);
|
|
return -ENXIO;
|
|
}
|
|
|
|
mtd_device_register(&info->mtd, info->parts,
|
|
ARRAY_SIZE(os_partitions));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit onenand_sim_exit(void)
|
|
{
|
|
struct onenand_chip *this = info->mtd.priv;
|
|
struct onenand_flash *flash = this->priv;
|
|
|
|
onenand_release(&info->mtd);
|
|
flash_exit(flash);
|
|
kfree(ffchars);
|
|
kfree(info);
|
|
}
|
|
|
|
module_init(onenand_sim_init);
|
|
module_exit(onenand_sim_exit);
|
|
|
|
MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
|
|
MODULE_DESCRIPTION("The OneNAND flash simulator");
|
|
MODULE_LICENSE("GPL");
|