mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 00:34:20 +08:00
d1df1e01af
Everytime the usb20 phy is enabled, there is a "sleeping function called from invalid context" BUG. In addition, there is a recursive locking happening because of the recurse call to clk_enable(). clk_enable() from arch/arm/mach-davinci/clock.c uses spin_lock_irqsave() before to invoke the callback usb20_phy_clk_enable(). usb20_phy_clk_enable() uses clk_get() and clk_enable_prepapre() which may sleep. Replace clk_prepare_enable() by davinci_clk_enable(). Signed-off-by: Alexandre Bailon <abailon@baylibre.com> Suggested-by: David Lechner <david@lechnology.com> [nsekhar@ti.com: minor commit description adjustment] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
356 lines
7.9 KiB
C
356 lines
7.9 KiB
C
/*
|
|
* DA8xx USB
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/init.h>
|
|
#include <linux/mfd/da8xx-cfgchip.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_data/usb-davinci.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/usb/musb.h>
|
|
|
|
#include <mach/clock.h>
|
|
#include <mach/common.h>
|
|
#include <mach/cputype.h>
|
|
#include <mach/da8xx.h>
|
|
#include <mach/irqs.h>
|
|
|
|
#include "clock.h"
|
|
|
|
#define DA8XX_USB0_BASE 0x01e00000
|
|
#define DA8XX_USB1_BASE 0x01e25000
|
|
|
|
static struct clk *usb20_clk;
|
|
|
|
static struct platform_device da8xx_usb_phy = {
|
|
.name = "da8xx-usb-phy",
|
|
.id = -1,
|
|
.dev = {
|
|
/*
|
|
* Setting init_name so that clock lookup will work in
|
|
* da8xx_register_usb11_phy_clk() even if this device is not
|
|
* registered yet.
|
|
*/
|
|
.init_name = "da8xx-usb-phy",
|
|
},
|
|
};
|
|
|
|
int __init da8xx_register_usb_phy(void)
|
|
{
|
|
return platform_device_register(&da8xx_usb_phy);
|
|
}
|
|
|
|
static struct musb_hdrc_config musb_config = {
|
|
.multipoint = true,
|
|
.num_eps = 5,
|
|
.ram_bits = 10,
|
|
};
|
|
|
|
static struct musb_hdrc_platform_data usb_data = {
|
|
/* OTG requires a Mini-AB connector */
|
|
.mode = MUSB_OTG,
|
|
.clock = "usb20",
|
|
.config = &musb_config,
|
|
};
|
|
|
|
static struct resource da8xx_usb20_resources[] = {
|
|
{
|
|
.start = DA8XX_USB0_BASE,
|
|
.end = DA8XX_USB0_BASE + SZ_64K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = IRQ_DA8XX_USB_INT,
|
|
.flags = IORESOURCE_IRQ,
|
|
.name = "mc",
|
|
},
|
|
};
|
|
|
|
static u64 usb_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device da8xx_usb20_dev = {
|
|
.name = "musb-da8xx",
|
|
.id = -1,
|
|
.dev = {
|
|
/*
|
|
* Setting init_name so that clock lookup will work in
|
|
* usb20_phy_clk_enable() even if this device is not registered.
|
|
*/
|
|
.init_name = "musb-da8xx",
|
|
.platform_data = &usb_data,
|
|
.dma_mask = &usb_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.resource = da8xx_usb20_resources,
|
|
.num_resources = ARRAY_SIZE(da8xx_usb20_resources),
|
|
};
|
|
|
|
int __init da8xx_register_usb20(unsigned int mA, unsigned int potpgt)
|
|
{
|
|
usb_data.power = mA > 510 ? 255 : mA / 2;
|
|
usb_data.potpgt = (potpgt + 1) / 2;
|
|
|
|
return platform_device_register(&da8xx_usb20_dev);
|
|
}
|
|
|
|
static struct resource da8xx_usb11_resources[] = {
|
|
[0] = {
|
|
.start = DA8XX_USB1_BASE,
|
|
.end = DA8XX_USB1_BASE + SZ_4K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = IRQ_DA8XX_IRQN,
|
|
.end = IRQ_DA8XX_IRQN,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device da8xx_usb11_device = {
|
|
.name = "ohci-da8xx",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &da8xx_usb11_dma_mask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.num_resources = ARRAY_SIZE(da8xx_usb11_resources),
|
|
.resource = da8xx_usb11_resources,
|
|
};
|
|
|
|
int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
|
|
{
|
|
da8xx_usb11_device.dev.platform_data = pdata;
|
|
return platform_device_register(&da8xx_usb11_device);
|
|
}
|
|
|
|
static struct clk usb_refclkin = {
|
|
.name = "usb_refclkin",
|
|
.set_rate = davinci_simple_set_rate,
|
|
};
|
|
|
|
static struct clk_lookup usb_refclkin_lookup =
|
|
CLK(NULL, "usb_refclkin", &usb_refclkin);
|
|
|
|
/**
|
|
* da8xx_register_usb_refclkin - register USB_REFCLKIN clock
|
|
*
|
|
* @rate: The clock rate in Hz
|
|
*
|
|
* This clock is only needed if the board provides an external USB_REFCLKIN
|
|
* signal, in which case it will be used as the parent of usb20_phy_clk and/or
|
|
* usb11_phy_clk.
|
|
*/
|
|
int __init da8xx_register_usb_refclkin(int rate)
|
|
{
|
|
int ret;
|
|
|
|
usb_refclkin.rate = rate;
|
|
ret = clk_register(&usb_refclkin);
|
|
if (ret)
|
|
return ret;
|
|
|
|
clkdev_add(&usb_refclkin_lookup);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void usb20_phy_clk_enable(struct clk *clk)
|
|
{
|
|
u32 val;
|
|
u32 timeout = 500000; /* 500 msec */
|
|
|
|
val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
|
|
|
|
/* The USB 2.O PLL requires that the USB 2.O PSC is enabled as well. */
|
|
davinci_clk_enable(usb20_clk);
|
|
|
|
/*
|
|
* Turn on the USB 2.0 PHY, but just the PLL, and not OTG. The USB 1.1
|
|
* host may use the PLL clock without USB 2.0 OTG being used.
|
|
*/
|
|
val &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN);
|
|
val |= CFGCHIP2_PHY_PLLON;
|
|
|
|
writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
|
|
|
|
while (--timeout) {
|
|
val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
|
|
if (val & CFGCHIP2_PHYCLKGD)
|
|
goto done;
|
|
udelay(1);
|
|
}
|
|
|
|
pr_err("Timeout waiting for USB 2.0 PHY clock good\n");
|
|
done:
|
|
davinci_clk_disable(usb20_clk);
|
|
}
|
|
|
|
static void usb20_phy_clk_disable(struct clk *clk)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
|
|
val |= CFGCHIP2_PHYPWRDN;
|
|
writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
|
|
}
|
|
|
|
static int usb20_phy_clk_set_parent(struct clk *clk, struct clk *parent)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
|
|
|
|
/* Set the mux depending on the parent clock. */
|
|
if (parent == &usb_refclkin) {
|
|
val &= ~CFGCHIP2_USB2PHYCLKMUX;
|
|
} else if (strcmp(parent->name, "pll0_aux_clk") == 0) {
|
|
val |= CFGCHIP2_USB2PHYCLKMUX;
|
|
} else {
|
|
pr_err("Bad parent on USB 2.0 PHY clock\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* reference frequency also comes from parent clock */
|
|
val &= ~CFGCHIP2_REFFREQ_MASK;
|
|
switch (clk_get_rate(parent)) {
|
|
case 12000000:
|
|
val |= CFGCHIP2_REFFREQ_12MHZ;
|
|
break;
|
|
case 13000000:
|
|
val |= CFGCHIP2_REFFREQ_13MHZ;
|
|
break;
|
|
case 19200000:
|
|
val |= CFGCHIP2_REFFREQ_19_2MHZ;
|
|
break;
|
|
case 20000000:
|
|
val |= CFGCHIP2_REFFREQ_20MHZ;
|
|
break;
|
|
case 24000000:
|
|
val |= CFGCHIP2_REFFREQ_24MHZ;
|
|
break;
|
|
case 26000000:
|
|
val |= CFGCHIP2_REFFREQ_26MHZ;
|
|
break;
|
|
case 38400000:
|
|
val |= CFGCHIP2_REFFREQ_38_4MHZ;
|
|
break;
|
|
case 40000000:
|
|
val |= CFGCHIP2_REFFREQ_40MHZ;
|
|
break;
|
|
case 48000000:
|
|
val |= CFGCHIP2_REFFREQ_48MHZ;
|
|
break;
|
|
default:
|
|
pr_err("Bad parent clock rate on USB 2.0 PHY clock\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct clk usb20_phy_clk = {
|
|
.name = "usb20_phy",
|
|
.clk_enable = usb20_phy_clk_enable,
|
|
.clk_disable = usb20_phy_clk_disable,
|
|
.set_parent = usb20_phy_clk_set_parent,
|
|
};
|
|
|
|
static struct clk_lookup usb20_phy_clk_lookup =
|
|
CLK("da8xx-usb-phy", "usb20_phy", &usb20_phy_clk);
|
|
|
|
/**
|
|
* da8xx_register_usb20_phy_clk - register USB0PHYCLKMUX clock
|
|
*
|
|
* @use_usb_refclkin: Selects the parent clock - either "usb_refclkin" if true
|
|
* or "pll0_aux" if false.
|
|
*/
|
|
int __init da8xx_register_usb20_phy_clk(bool use_usb_refclkin)
|
|
{
|
|
struct clk *parent;
|
|
int ret;
|
|
|
|
usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20");
|
|
ret = PTR_ERR_OR_ZERO(usb20_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
parent = clk_get(NULL, use_usb_refclkin ? "usb_refclkin" : "pll0_aux");
|
|
ret = PTR_ERR_OR_ZERO(parent);
|
|
if (ret) {
|
|
clk_put(usb20_clk);
|
|
return ret;
|
|
}
|
|
|
|
usb20_phy_clk.parent = parent;
|
|
ret = clk_register(&usb20_phy_clk);
|
|
if (!ret)
|
|
clkdev_add(&usb20_phy_clk_lookup);
|
|
|
|
clk_put(parent);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int usb11_phy_clk_set_parent(struct clk *clk, struct clk *parent)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
|
|
|
|
/* Set the USB 1.1 PHY clock mux based on the parent clock. */
|
|
if (parent == &usb20_phy_clk) {
|
|
val &= ~CFGCHIP2_USB1PHYCLKMUX;
|
|
} else if (parent == &usb_refclkin) {
|
|
val |= CFGCHIP2_USB1PHYCLKMUX;
|
|
} else {
|
|
pr_err("Bad parent on USB 1.1 PHY clock\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct clk usb11_phy_clk = {
|
|
.name = "usb11_phy",
|
|
.set_parent = usb11_phy_clk_set_parent,
|
|
};
|
|
|
|
static struct clk_lookup usb11_phy_clk_lookup =
|
|
CLK("da8xx-usb-phy", "usb11_phy", &usb11_phy_clk);
|
|
|
|
/**
|
|
* da8xx_register_usb11_phy_clk - register USB1PHYCLKMUX clock
|
|
*
|
|
* @use_usb_refclkin: Selects the parent clock - either "usb_refclkin" if true
|
|
* or "usb20_phy" if false.
|
|
*/
|
|
int __init da8xx_register_usb11_phy_clk(bool use_usb_refclkin)
|
|
{
|
|
struct clk *parent;
|
|
int ret = 0;
|
|
|
|
if (use_usb_refclkin)
|
|
parent = clk_get(NULL, "usb_refclkin");
|
|
else
|
|
parent = clk_get(&da8xx_usb_phy.dev, "usb20_phy");
|
|
if (IS_ERR(parent))
|
|
return PTR_ERR(parent);
|
|
|
|
usb11_phy_clk.parent = parent;
|
|
ret = clk_register(&usb11_phy_clk);
|
|
if (!ret)
|
|
clkdev_add(&usb11_phy_clk_lookup);
|
|
|
|
clk_put(parent);
|
|
|
|
return ret;
|
|
}
|