linux/drivers/soc/ti/pm33xx.c
Christophe JAILLET 17ad466259 soc: ti: pm33xx: Fix some resource leak in the error handling paths of the probe function
'am33xx_pm_rtc_setup()' allocates some resources that must be freed on the
error. Commit 2152fbbd47 ("soc: ti: pm33xx: Simplify RTC usage to prepare
to drop platform data") has introduced the use of these resources but has
only updated the remove function.

Fix the error handling path of the probe function now.

Fixes: 2152fbbd47 ("soc: ti: pm33xx: Simplify RTC usage to prepare to drop platform data")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2021-01-24 20:51:36 -08:00

613 lines
14 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* AM33XX Power Management Routines
*
* Copyright (C) 2012-2018 Texas Instruments Incorporated - http://www.ti.com/
* Vaibhav Bedia, Dave Gerlach
*/
#include <linux/clk.h>
#include <linux/cpu.h>
#include <linux/err.h>
#include <linux/genalloc.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/nvmem-consumer.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_data/pm33xx.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/rtc.h>
#include <linux/rtc/rtc-omap.h>
#include <linux/sizes.h>
#include <linux/sram.h>
#include <linux/suspend.h>
#include <linux/ti-emif-sram.h>
#include <linux/wkup_m3_ipc.h>
#include <asm/proc-fns.h>
#include <asm/suspend.h>
#include <asm/system_misc.h>
#define AMX3_PM_SRAM_SYMBOL_OFFSET(sym) ((unsigned long)(sym) - \
(unsigned long)pm_sram->do_wfi)
#define RTC_SCRATCH_RESUME_REG 0
#define RTC_SCRATCH_MAGIC_REG 1
#define RTC_REG_BOOT_MAGIC 0x8cd0 /* RTC */
#define GIC_INT_SET_PENDING_BASE 0x200
#define AM43XX_GIC_DIST_BASE 0x48241000
static void __iomem *rtc_base_virt;
static struct clk *rtc_fck;
static u32 rtc_magic_val;
static int (*am33xx_do_wfi_sram)(unsigned long unused);
static phys_addr_t am33xx_do_wfi_sram_phys;
static struct gen_pool *sram_pool, *sram_pool_data;
static unsigned long ocmcram_location, ocmcram_location_data;
static struct rtc_device *omap_rtc;
static void __iomem *gic_dist_base;
static struct am33xx_pm_platform_data *pm_ops;
static struct am33xx_pm_sram_addr *pm_sram;
static struct device *pm33xx_dev;
static struct wkup_m3_ipc *m3_ipc;
#ifdef CONFIG_SUSPEND
static int rtc_only_idle;
static int retrigger_irq;
static unsigned long suspend_wfi_flags;
static struct wkup_m3_wakeup_src wakeup_src = {.irq_nr = 0,
.src = "Unknown",
};
static struct wkup_m3_wakeup_src rtc_alarm_wakeup = {
.irq_nr = 108, .src = "RTC Alarm",
};
static struct wkup_m3_wakeup_src rtc_ext_wakeup = {
.irq_nr = 0, .src = "Ext wakeup",
};
#endif
static u32 sram_suspend_address(unsigned long addr)
{
return ((unsigned long)am33xx_do_wfi_sram +
AMX3_PM_SRAM_SYMBOL_OFFSET(addr));
}
static int am33xx_push_sram_idle(void)
{
struct am33xx_pm_ro_sram_data ro_sram_data;
int ret;
u32 table_addr, ro_data_addr;
void *copy_addr;
ro_sram_data.amx3_pm_sram_data_virt = ocmcram_location_data;
ro_sram_data.amx3_pm_sram_data_phys =
gen_pool_virt_to_phys(sram_pool_data, ocmcram_location_data);
ro_sram_data.rtc_base_virt = rtc_base_virt;
/* Save physical address to calculate resume offset during pm init */
am33xx_do_wfi_sram_phys = gen_pool_virt_to_phys(sram_pool,
ocmcram_location);
am33xx_do_wfi_sram = sram_exec_copy(sram_pool, (void *)ocmcram_location,
pm_sram->do_wfi,
*pm_sram->do_wfi_sz);
if (!am33xx_do_wfi_sram) {
dev_err(pm33xx_dev,
"PM: %s: am33xx_do_wfi copy to sram failed\n",
__func__);
return -ENODEV;
}
table_addr =
sram_suspend_address((unsigned long)pm_sram->emif_sram_table);
ret = ti_emif_copy_pm_function_table(sram_pool, (void *)table_addr);
if (ret) {
dev_dbg(pm33xx_dev,
"PM: %s: EMIF function copy failed\n", __func__);
return -EPROBE_DEFER;
}
ro_data_addr =
sram_suspend_address((unsigned long)pm_sram->ro_sram_data);
copy_addr = sram_exec_copy(sram_pool, (void *)ro_data_addr,
&ro_sram_data,
sizeof(ro_sram_data));
if (!copy_addr) {
dev_err(pm33xx_dev,
"PM: %s: ro_sram_data copy to sram failed\n",
__func__);
return -ENODEV;
}
return 0;
}
static int am33xx_do_sram_idle(u32 wfi_flags)
{
if (!m3_ipc || !pm_ops)
return 0;
if (wfi_flags & WFI_FLAG_WAKE_M3)
m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_IDLE);
return pm_ops->cpu_suspend(am33xx_do_wfi_sram, wfi_flags);
}
static int __init am43xx_map_gic(void)
{
gic_dist_base = ioremap(AM43XX_GIC_DIST_BASE, SZ_4K);
if (!gic_dist_base)
return -ENOMEM;
return 0;
}
#ifdef CONFIG_SUSPEND
static struct wkup_m3_wakeup_src rtc_wake_src(void)
{
u32 i;
i = __raw_readl(rtc_base_virt + 0x44) & 0x40;
if (i) {
retrigger_irq = rtc_alarm_wakeup.irq_nr;
return rtc_alarm_wakeup;
}
retrigger_irq = rtc_ext_wakeup.irq_nr;
return rtc_ext_wakeup;
}
static int am33xx_rtc_only_idle(unsigned long wfi_flags)
{
omap_rtc_power_off_program(&omap_rtc->dev);
am33xx_do_wfi_sram(wfi_flags);
return 0;
}
/*
* Note that the RTC module clock must be re-enabled only for rtc+ddr suspend.
* And looks like the module can stay in SYSC_IDLE_SMART_WKUP mode configured
* by the interconnect code just fine for both rtc+ddr suspend and retention
* suspend.
*/
static int am33xx_pm_suspend(suspend_state_t suspend_state)
{
int i, ret = 0;
if (suspend_state == PM_SUSPEND_MEM &&
pm_ops->check_off_mode_enable()) {
ret = clk_prepare_enable(rtc_fck);
if (ret) {
dev_err(pm33xx_dev, "Failed to enable clock: %i\n", ret);
return ret;
}
pm_ops->save_context();
suspend_wfi_flags |= WFI_FLAG_RTC_ONLY;
clk_save_context();
ret = pm_ops->soc_suspend(suspend_state, am33xx_rtc_only_idle,
suspend_wfi_flags);
suspend_wfi_flags &= ~WFI_FLAG_RTC_ONLY;
dev_info(pm33xx_dev, "Entering RTC Only mode with DDR in self-refresh\n");
if (!ret) {
clk_restore_context();
pm_ops->restore_context();
m3_ipc->ops->set_rtc_only(m3_ipc);
am33xx_push_sram_idle();
}
} else {
ret = pm_ops->soc_suspend(suspend_state, am33xx_do_wfi_sram,
suspend_wfi_flags);
}
if (ret) {
dev_err(pm33xx_dev, "PM: Kernel suspend failure\n");
} else {
i = m3_ipc->ops->request_pm_status(m3_ipc);
switch (i) {
case 0:
dev_info(pm33xx_dev,
"PM: Successfully put all powerdomains to target state\n");
break;
case 1:
dev_err(pm33xx_dev,
"PM: Could not transition all powerdomains to target state\n");
ret = -1;
break;
default:
dev_err(pm33xx_dev,
"PM: CM3 returned unknown result = %d\n", i);
ret = -1;
}
/* print the wakeup reason */
if (rtc_only_idle) {
wakeup_src = rtc_wake_src();
pr_info("PM: Wakeup source %s\n", wakeup_src.src);
} else {
pr_info("PM: Wakeup source %s\n",
m3_ipc->ops->request_wake_src(m3_ipc));
}
}
if (suspend_state == PM_SUSPEND_MEM && pm_ops->check_off_mode_enable())
clk_disable_unprepare(rtc_fck);
return ret;
}
static int am33xx_pm_enter(suspend_state_t suspend_state)
{
int ret = 0;
switch (suspend_state) {
case PM_SUSPEND_MEM:
case PM_SUSPEND_STANDBY:
ret = am33xx_pm_suspend(suspend_state);
break;
default:
ret = -EINVAL;
}
return ret;
}
static int am33xx_pm_begin(suspend_state_t state)
{
int ret = -EINVAL;
struct nvmem_device *nvmem;
if (state == PM_SUSPEND_MEM && pm_ops->check_off_mode_enable()) {
nvmem = devm_nvmem_device_get(&omap_rtc->dev,
"omap_rtc_scratch0");
if (!IS_ERR(nvmem))
nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4, 4,
(void *)&rtc_magic_val);
rtc_only_idle = 1;
} else {
rtc_only_idle = 0;
}
pm_ops->begin_suspend();
switch (state) {
case PM_SUSPEND_MEM:
ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_DEEPSLEEP);
break;
case PM_SUSPEND_STANDBY:
ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_STANDBY);
break;
}
return ret;
}
static void am33xx_pm_end(void)
{
u32 val = 0;
struct nvmem_device *nvmem;
nvmem = devm_nvmem_device_get(&omap_rtc->dev, "omap_rtc_scratch0");
if (IS_ERR(nvmem))
return;
m3_ipc->ops->finish_low_power(m3_ipc);
if (rtc_only_idle) {
if (retrigger_irq) {
/*
* 32 bits of Interrupt Set-Pending correspond to 32
* 32 interrupts. Compute the bit offset of the
* Interrupt and set that particular bit
* Compute the register offset by dividing interrupt
* number by 32 and mutiplying by 4
*/
writel_relaxed(1 << (retrigger_irq & 31),
gic_dist_base + GIC_INT_SET_PENDING_BASE
+ retrigger_irq / 32 * 4);
}
nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4, 4,
(void *)&val);
}
rtc_only_idle = 0;
pm_ops->finish_suspend();
}
static int am33xx_pm_valid(suspend_state_t state)
{
switch (state) {
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
return 1;
default:
return 0;
}
}
static const struct platform_suspend_ops am33xx_pm_ops = {
.begin = am33xx_pm_begin,
.end = am33xx_pm_end,
.enter = am33xx_pm_enter,
.valid = am33xx_pm_valid,
};
#endif /* CONFIG_SUSPEND */
static void am33xx_pm_set_ipc_ops(void)
{
u32 resume_address;
int temp;
temp = ti_emif_get_mem_type();
if (temp < 0) {
dev_err(pm33xx_dev, "PM: Cannot determine memory type, no PM available\n");
return;
}
m3_ipc->ops->set_mem_type(m3_ipc, temp);
/* Physical resume address to be used by ROM code */
resume_address = am33xx_do_wfi_sram_phys +
*pm_sram->resume_offset + 0x4;
m3_ipc->ops->set_resume_address(m3_ipc, (void *)resume_address);
}
static void am33xx_pm_free_sram(void)
{
gen_pool_free(sram_pool, ocmcram_location, *pm_sram->do_wfi_sz);
gen_pool_free(sram_pool_data, ocmcram_location_data,
sizeof(struct am33xx_pm_ro_sram_data));
}
/*
* Push the minimal suspend-resume code to SRAM
*/
static int am33xx_pm_alloc_sram(void)
{
struct device_node *np;
int ret = 0;
np = of_find_compatible_node(NULL, NULL, "ti,omap3-mpu");
if (!np) {
np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
if (!np) {
dev_err(pm33xx_dev, "PM: %s: Unable to find device node for mpu\n",
__func__);
return -ENODEV;
}
}
sram_pool = of_gen_pool_get(np, "pm-sram", 0);
if (!sram_pool) {
dev_err(pm33xx_dev, "PM: %s: Unable to get sram pool for ocmcram\n",
__func__);
ret = -ENODEV;
goto mpu_put_node;
}
sram_pool_data = of_gen_pool_get(np, "pm-sram", 1);
if (!sram_pool_data) {
dev_err(pm33xx_dev, "PM: %s: Unable to get sram data pool for ocmcram\n",
__func__);
ret = -ENODEV;
goto mpu_put_node;
}
ocmcram_location = gen_pool_alloc(sram_pool, *pm_sram->do_wfi_sz);
if (!ocmcram_location) {
dev_err(pm33xx_dev, "PM: %s: Unable to allocate memory from ocmcram\n",
__func__);
ret = -ENOMEM;
goto mpu_put_node;
}
ocmcram_location_data = gen_pool_alloc(sram_pool_data,
sizeof(struct emif_regs_amx3));
if (!ocmcram_location_data) {
dev_err(pm33xx_dev, "PM: Unable to allocate memory from ocmcram\n");
gen_pool_free(sram_pool, ocmcram_location, *pm_sram->do_wfi_sz);
ret = -ENOMEM;
}
mpu_put_node:
of_node_put(np);
return ret;
}
static int am33xx_pm_rtc_setup(void)
{
struct device_node *np;
unsigned long val = 0;
struct nvmem_device *nvmem;
int error;
np = of_find_node_by_name(NULL, "rtc");
if (of_device_is_available(np)) {
/* RTC interconnect target module clock */
rtc_fck = of_clk_get_by_name(np->parent, "fck");
if (IS_ERR(rtc_fck))
return PTR_ERR(rtc_fck);
rtc_base_virt = of_iomap(np, 0);
if (!rtc_base_virt) {
pr_warn("PM: could not iomap rtc");
error = -ENODEV;
goto err_clk_put;
}
omap_rtc = rtc_class_open("rtc0");
if (!omap_rtc) {
pr_warn("PM: rtc0 not available");
error = -EPROBE_DEFER;
goto err_iounmap;
}
nvmem = devm_nvmem_device_get(&omap_rtc->dev,
"omap_rtc_scratch0");
if (!IS_ERR(nvmem)) {
nvmem_device_read(nvmem, RTC_SCRATCH_MAGIC_REG * 4,
4, (void *)&rtc_magic_val);
if ((rtc_magic_val & 0xffff) != RTC_REG_BOOT_MAGIC)
pr_warn("PM: bootloader does not support rtc-only!\n");
nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4,
4, (void *)&val);
val = pm_sram->resume_address;
nvmem_device_write(nvmem, RTC_SCRATCH_RESUME_REG * 4,
4, (void *)&val);
}
} else {
pr_warn("PM: no-rtc available, rtc-only mode disabled.\n");
}
return 0;
err_iounmap:
iounmap(rtc_base_virt);
err_clk_put:
clk_put(rtc_fck);
return error;
}
static int am33xx_pm_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
int ret;
if (!of_machine_is_compatible("ti,am33xx") &&
!of_machine_is_compatible("ti,am43"))
return -ENODEV;
pm_ops = dev->platform_data;
if (!pm_ops) {
dev_err(dev, "PM: Cannot get core PM ops!\n");
return -ENODEV;
}
ret = am43xx_map_gic();
if (ret) {
pr_err("PM: Could not ioremap GIC base\n");
return ret;
}
pm_sram = pm_ops->get_sram_addrs();
if (!pm_sram) {
dev_err(dev, "PM: Cannot get PM asm function addresses!!\n");
return -ENODEV;
}
m3_ipc = wkup_m3_ipc_get();
if (!m3_ipc) {
pr_err("PM: Cannot get wkup_m3_ipc handle\n");
return -EPROBE_DEFER;
}
pm33xx_dev = dev;
ret = am33xx_pm_alloc_sram();
if (ret)
return ret;
ret = am33xx_pm_rtc_setup();
if (ret)
goto err_free_sram;
ret = am33xx_push_sram_idle();
if (ret)
goto err_unsetup_rtc;
am33xx_pm_set_ipc_ops();
#ifdef CONFIG_SUSPEND
suspend_set_ops(&am33xx_pm_ops);
/*
* For a system suspend we must flush the caches, we want
* the DDR in self-refresh, we want to save the context
* of the EMIF, and we want the wkup_m3 to handle low-power
* transition.
*/
suspend_wfi_flags |= WFI_FLAG_FLUSH_CACHE;
suspend_wfi_flags |= WFI_FLAG_SELF_REFRESH;
suspend_wfi_flags |= WFI_FLAG_SAVE_EMIF;
suspend_wfi_flags |= WFI_FLAG_WAKE_M3;
#endif /* CONFIG_SUSPEND */
pm_runtime_enable(dev);
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
pm_runtime_put_noidle(dev);
goto err_pm_runtime_disable;
}
ret = pm_ops->init(am33xx_do_sram_idle);
if (ret) {
dev_err(dev, "Unable to call core pm init!\n");
ret = -ENODEV;
goto err_pm_runtime_put;
}
return 0;
err_pm_runtime_put:
pm_runtime_put_sync(dev);
err_pm_runtime_disable:
pm_runtime_disable(dev);
wkup_m3_ipc_put(m3_ipc);
err_unsetup_rtc:
iounmap(rtc_base_virt);
clk_put(rtc_fck);
err_free_sram:
am33xx_pm_free_sram();
pm33xx_dev = NULL;
return ret;
}
static int am33xx_pm_remove(struct platform_device *pdev)
{
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
if (pm_ops->deinit)
pm_ops->deinit();
suspend_set_ops(NULL);
wkup_m3_ipc_put(m3_ipc);
am33xx_pm_free_sram();
iounmap(rtc_base_virt);
clk_put(rtc_fck);
return 0;
}
static struct platform_driver am33xx_pm_driver = {
.driver = {
.name = "pm33xx",
},
.probe = am33xx_pm_probe,
.remove = am33xx_pm_remove,
};
module_platform_driver(am33xx_pm_driver);
MODULE_ALIAS("platform:pm33xx");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("am33xx power management driver");