mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 23:14:31 +08:00
17f934024e
This patch adds support for usb role switch to dwc2, by using overriding control of the PHY voltage valid and ID input signals. iddig signal (ID) can be overridden: - when setting GUSBCFG_FORCEHOSTMODE, iddig input pin is overridden with 1; - when setting GUSBCFG_FORCEDEVMODE, iddig input pin is overridden with 0. avalid/bvalid/vbusvalid signals can be overridden respectively with: - GOTGCTL_AVALOEN + GOTGCTL_AVALOVAL - GOTGCTL_BVALOEN + GOTGCTL_BVALOVAL - GOTGCTL_VBVALEN + GOTGCTL_VBVALOVAL It is possible to determine valid sessions thanks to usb role switch: - if USB_ROLE_NONE then !avalid && !bvalid && !vbusvalid - if USB_ROLE_DEVICE then !avalid && bvalid && vbusvalid - if USB_ROLE_HOST then avalid && !bvalid && vbusvalid Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
98 lines
3.2 KiB
Plaintext
98 lines
3.2 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0
|
|
|
|
config USB_DWC2
|
|
tristate "DesignWare USB2 DRD Core Support"
|
|
depends on HAS_DMA
|
|
depends on USB || USB_GADGET
|
|
depends on HAS_IOMEM
|
|
select USB_ROLE_SWITCH
|
|
help
|
|
Say Y here if your system has a Dual Role Hi-Speed USB
|
|
controller based on the DesignWare HSOTG IP Core.
|
|
|
|
For host mode, if you choose to build the driver as dynamically
|
|
linked modules, the core module will be called dwc2.ko, the PCI
|
|
bus interface module (if you have a PCI bus system) will be
|
|
called dwc2_pci.ko, and the platform interface module (for
|
|
controllers directly connected to the CPU) will be called
|
|
dwc2_platform.ko. For all modes(host, gadget and dual-role), there
|
|
will be an additional module named dwc2.ko.
|
|
|
|
if USB_DWC2
|
|
|
|
choice
|
|
bool "DWC2 Mode Selection"
|
|
default USB_DWC2_DUAL_ROLE if (USB && USB_GADGET)
|
|
default USB_DWC2_HOST if (USB && !USB_GADGET)
|
|
default USB_DWC2_PERIPHERAL if (!USB && USB_GADGET)
|
|
|
|
config USB_DWC2_HOST
|
|
bool "Host only mode"
|
|
depends on USB=y || (USB_DWC2=m && USB)
|
|
help
|
|
The Designware USB2.0 high-speed host controller
|
|
integrated into many SoCs. Select this option if you want the
|
|
driver to operate in Host-only mode.
|
|
|
|
comment "Gadget/Dual-role mode requires USB Gadget support to be enabled"
|
|
|
|
config USB_DWC2_PERIPHERAL
|
|
bool "Gadget only mode"
|
|
depends on USB_GADGET=y || USB_GADGET=USB_DWC2
|
|
help
|
|
The Designware USB2.0 high-speed gadget controller
|
|
integrated into many SoCs. Select this option if you want the
|
|
driver to operate in Peripheral-only mode. This option requires
|
|
USB_GADGET to be enabled.
|
|
|
|
config USB_DWC2_DUAL_ROLE
|
|
bool "Dual Role mode"
|
|
depends on (USB=y && USB_GADGET=y) || (USB_DWC2=m && USB && USB_GADGET)
|
|
help
|
|
Select this option if you want the driver to work in a dual-role
|
|
mode. In this mode both host and gadget features are enabled, and
|
|
the role will be determined by the cable that gets plugged-in. This
|
|
option requires USB_GADGET to be enabled.
|
|
endchoice
|
|
|
|
config USB_DWC2_PCI
|
|
tristate "DWC2 PCI"
|
|
depends on USB_PCI
|
|
depends on USB_GADGET || !USB_GADGET
|
|
select NOP_USB_XCEIV
|
|
help
|
|
The Designware USB2.0 PCI interface module for controllers
|
|
connected to a PCI bus.
|
|
|
|
config USB_DWC2_DEBUG
|
|
bool "Enable Debugging Messages"
|
|
help
|
|
Say Y here to enable debugging messages in the DWC2 Driver.
|
|
|
|
config USB_DWC2_VERBOSE
|
|
bool "Enable Verbose Debugging Messages"
|
|
depends on USB_DWC2_DEBUG
|
|
help
|
|
Say Y here to enable verbose debugging messages in the DWC2 Driver.
|
|
WARNING: Enabling this will quickly fill your message log.
|
|
If in doubt, say N.
|
|
|
|
config USB_DWC2_TRACK_MISSED_SOFS
|
|
bool "Enable Missed SOF Tracking"
|
|
help
|
|
Say Y here to enable logging of missed SOF events to the dmesg log.
|
|
WARNING: This feature is still experimental.
|
|
If in doubt, say N.
|
|
|
|
config USB_DWC2_DEBUG_PERIODIC
|
|
bool "Enable Debugging Messages For Periodic Transfers"
|
|
depends on USB_DWC2_DEBUG || USB_DWC2_VERBOSE
|
|
default y
|
|
help
|
|
Say N here to disable (verbose) debugging messages to be
|
|
logged for periodic transfers. This allows better debugging of
|
|
non-periodic transfers, but of course the debug logs will be
|
|
incomplete. Note that this also disables some debug messages
|
|
for which the transfer type cannot be deduced.
|
|
endif
|