mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-26 05:34:13 +08:00
24ea602e18
Add support for communicating with a Sonics Silicon Backplane through a SDIO interface, as found in the Nintendo Wii WLAN daughter card. The Nintendo Wii WLAN card includes a custom Broadcom 4318 chip with a SDIO host interface. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
1451 lines
32 KiB
C
1451 lines
32 KiB
C
/*
|
|
* Sonics Silicon Backplane
|
|
* Subsystem core
|
|
*
|
|
* Copyright 2005, Broadcom Corporation
|
|
* Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
|
|
*
|
|
* Licensed under the GNU/GPL. See COPYING for details.
|
|
*/
|
|
|
|
#include "ssb_private.h"
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ssb/ssb.h>
|
|
#include <linux/ssb/ssb_regs.h>
|
|
#include <linux/ssb/ssb_driver_gige.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/mmc/sdio_func.h>
|
|
|
|
#include <pcmcia/cs_types.h>
|
|
#include <pcmcia/cs.h>
|
|
#include <pcmcia/cistpl.h>
|
|
#include <pcmcia/ds.h>
|
|
|
|
|
|
MODULE_DESCRIPTION("Sonics Silicon Backplane driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
/* Temporary list of yet-to-be-attached buses */
|
|
static LIST_HEAD(attach_queue);
|
|
/* List if running buses */
|
|
static LIST_HEAD(buses);
|
|
/* Software ID counter */
|
|
static unsigned int next_busnumber;
|
|
/* buses_mutes locks the two buslists and the next_busnumber.
|
|
* Don't lock this directly, but use ssb_buses_[un]lock() below. */
|
|
static DEFINE_MUTEX(buses_mutex);
|
|
|
|
/* There are differences in the codeflow, if the bus is
|
|
* initialized from early boot, as various needed services
|
|
* are not available early. This is a mechanism to delay
|
|
* these initializations to after early boot has finished.
|
|
* It's also used to avoid mutex locking, as that's not
|
|
* available and needed early. */
|
|
static bool ssb_is_early_boot = 1;
|
|
|
|
static void ssb_buses_lock(void);
|
|
static void ssb_buses_unlock(void);
|
|
|
|
|
|
#ifdef CONFIG_SSB_PCIHOST
|
|
struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev)
|
|
{
|
|
struct ssb_bus *bus;
|
|
|
|
ssb_buses_lock();
|
|
list_for_each_entry(bus, &buses, list) {
|
|
if (bus->bustype == SSB_BUSTYPE_PCI &&
|
|
bus->host_pci == pdev)
|
|
goto found;
|
|
}
|
|
bus = NULL;
|
|
found:
|
|
ssb_buses_unlock();
|
|
|
|
return bus;
|
|
}
|
|
#endif /* CONFIG_SSB_PCIHOST */
|
|
|
|
#ifdef CONFIG_SSB_PCMCIAHOST
|
|
struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev)
|
|
{
|
|
struct ssb_bus *bus;
|
|
|
|
ssb_buses_lock();
|
|
list_for_each_entry(bus, &buses, list) {
|
|
if (bus->bustype == SSB_BUSTYPE_PCMCIA &&
|
|
bus->host_pcmcia == pdev)
|
|
goto found;
|
|
}
|
|
bus = NULL;
|
|
found:
|
|
ssb_buses_unlock();
|
|
|
|
return bus;
|
|
}
|
|
#endif /* CONFIG_SSB_PCMCIAHOST */
|
|
|
|
#ifdef CONFIG_SSB_SDIOHOST
|
|
struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func)
|
|
{
|
|
struct ssb_bus *bus;
|
|
|
|
ssb_buses_lock();
|
|
list_for_each_entry(bus, &buses, list) {
|
|
if (bus->bustype == SSB_BUSTYPE_SDIO &&
|
|
bus->host_sdio == func)
|
|
goto found;
|
|
}
|
|
bus = NULL;
|
|
found:
|
|
ssb_buses_unlock();
|
|
|
|
return bus;
|
|
}
|
|
#endif /* CONFIG_SSB_SDIOHOST */
|
|
|
|
int ssb_for_each_bus_call(unsigned long data,
|
|
int (*func)(struct ssb_bus *bus, unsigned long data))
|
|
{
|
|
struct ssb_bus *bus;
|
|
int res;
|
|
|
|
ssb_buses_lock();
|
|
list_for_each_entry(bus, &buses, list) {
|
|
res = func(bus, data);
|
|
if (res >= 0) {
|
|
ssb_buses_unlock();
|
|
return res;
|
|
}
|
|
}
|
|
ssb_buses_unlock();
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static struct ssb_device *ssb_device_get(struct ssb_device *dev)
|
|
{
|
|
if (dev)
|
|
get_device(dev->dev);
|
|
return dev;
|
|
}
|
|
|
|
static void ssb_device_put(struct ssb_device *dev)
|
|
{
|
|
if (dev)
|
|
put_device(dev->dev);
|
|
}
|
|
|
|
static int ssb_device_resume(struct device *dev)
|
|
{
|
|
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
|
|
struct ssb_driver *ssb_drv;
|
|
int err = 0;
|
|
|
|
if (dev->driver) {
|
|
ssb_drv = drv_to_ssb_drv(dev->driver);
|
|
if (ssb_drv && ssb_drv->resume)
|
|
err = ssb_drv->resume(ssb_dev);
|
|
if (err)
|
|
goto out;
|
|
}
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int ssb_device_suspend(struct device *dev, pm_message_t state)
|
|
{
|
|
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
|
|
struct ssb_driver *ssb_drv;
|
|
int err = 0;
|
|
|
|
if (dev->driver) {
|
|
ssb_drv = drv_to_ssb_drv(dev->driver);
|
|
if (ssb_drv && ssb_drv->suspend)
|
|
err = ssb_drv->suspend(ssb_dev, state);
|
|
if (err)
|
|
goto out;
|
|
}
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
int ssb_bus_resume(struct ssb_bus *bus)
|
|
{
|
|
int err;
|
|
|
|
/* Reset HW state information in memory, so that HW is
|
|
* completely reinitialized. */
|
|
bus->mapped_device = NULL;
|
|
#ifdef CONFIG_SSB_DRIVER_PCICORE
|
|
bus->pcicore.setup_done = 0;
|
|
#endif
|
|
|
|
err = ssb_bus_powerup(bus, 0);
|
|
if (err)
|
|
return err;
|
|
err = ssb_pcmcia_hardware_setup(bus);
|
|
if (err) {
|
|
ssb_bus_may_powerdown(bus);
|
|
return err;
|
|
}
|
|
ssb_chipco_resume(&bus->chipco);
|
|
ssb_bus_may_powerdown(bus);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(ssb_bus_resume);
|
|
|
|
int ssb_bus_suspend(struct ssb_bus *bus)
|
|
{
|
|
ssb_chipco_suspend(&bus->chipco);
|
|
ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(ssb_bus_suspend);
|
|
|
|
#ifdef CONFIG_SSB_SPROM
|
|
int ssb_devices_freeze(struct ssb_bus *bus)
|
|
{
|
|
struct ssb_device *dev;
|
|
struct ssb_driver *drv;
|
|
int err = 0;
|
|
int i;
|
|
pm_message_t state = PMSG_FREEZE;
|
|
|
|
/* First check that we are capable to freeze all devices. */
|
|
for (i = 0; i < bus->nr_devices; i++) {
|
|
dev = &(bus->devices[i]);
|
|
if (!dev->dev ||
|
|
!dev->dev->driver ||
|
|
!device_is_registered(dev->dev))
|
|
continue;
|
|
drv = drv_to_ssb_drv(dev->dev->driver);
|
|
if (!drv)
|
|
continue;
|
|
if (!drv->suspend) {
|
|
/* Nope, can't suspend this one. */
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
/* Now suspend all devices */
|
|
for (i = 0; i < bus->nr_devices; i++) {
|
|
dev = &(bus->devices[i]);
|
|
if (!dev->dev ||
|
|
!dev->dev->driver ||
|
|
!device_is_registered(dev->dev))
|
|
continue;
|
|
drv = drv_to_ssb_drv(dev->dev->driver);
|
|
if (!drv)
|
|
continue;
|
|
err = drv->suspend(dev, state);
|
|
if (err) {
|
|
ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
|
|
dev_name(dev->dev));
|
|
goto err_unwind;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
err_unwind:
|
|
for (i--; i >= 0; i--) {
|
|
dev = &(bus->devices[i]);
|
|
if (!dev->dev ||
|
|
!dev->dev->driver ||
|
|
!device_is_registered(dev->dev))
|
|
continue;
|
|
drv = drv_to_ssb_drv(dev->dev->driver);
|
|
if (!drv)
|
|
continue;
|
|
if (drv->resume)
|
|
drv->resume(dev);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
int ssb_devices_thaw(struct ssb_bus *bus)
|
|
{
|
|
struct ssb_device *dev;
|
|
struct ssb_driver *drv;
|
|
int err;
|
|
int i;
|
|
|
|
for (i = 0; i < bus->nr_devices; i++) {
|
|
dev = &(bus->devices[i]);
|
|
if (!dev->dev ||
|
|
!dev->dev->driver ||
|
|
!device_is_registered(dev->dev))
|
|
continue;
|
|
drv = drv_to_ssb_drv(dev->dev->driver);
|
|
if (!drv)
|
|
continue;
|
|
if (SSB_WARN_ON(!drv->resume))
|
|
continue;
|
|
err = drv->resume(dev);
|
|
if (err) {
|
|
ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
|
|
dev_name(dev->dev));
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_SSB_SPROM */
|
|
|
|
static void ssb_device_shutdown(struct device *dev)
|
|
{
|
|
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
|
|
struct ssb_driver *ssb_drv;
|
|
|
|
if (!dev->driver)
|
|
return;
|
|
ssb_drv = drv_to_ssb_drv(dev->driver);
|
|
if (ssb_drv && ssb_drv->shutdown)
|
|
ssb_drv->shutdown(ssb_dev);
|
|
}
|
|
|
|
static int ssb_device_remove(struct device *dev)
|
|
{
|
|
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
|
|
struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
|
|
|
|
if (ssb_drv && ssb_drv->remove)
|
|
ssb_drv->remove(ssb_dev);
|
|
ssb_device_put(ssb_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ssb_device_probe(struct device *dev)
|
|
{
|
|
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
|
|
struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
|
|
int err = 0;
|
|
|
|
ssb_device_get(ssb_dev);
|
|
if (ssb_drv && ssb_drv->probe)
|
|
err = ssb_drv->probe(ssb_dev, &ssb_dev->id);
|
|
if (err)
|
|
ssb_device_put(ssb_dev);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int ssb_match_devid(const struct ssb_device_id *tabid,
|
|
const struct ssb_device_id *devid)
|
|
{
|
|
if ((tabid->vendor != devid->vendor) &&
|
|
tabid->vendor != SSB_ANY_VENDOR)
|
|
return 0;
|
|
if ((tabid->coreid != devid->coreid) &&
|
|
tabid->coreid != SSB_ANY_ID)
|
|
return 0;
|
|
if ((tabid->revision != devid->revision) &&
|
|
tabid->revision != SSB_ANY_REV)
|
|
return 0;
|
|
return 1;
|
|
}
|
|
|
|
static int ssb_bus_match(struct device *dev, struct device_driver *drv)
|
|
{
|
|
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
|
|
struct ssb_driver *ssb_drv = drv_to_ssb_drv(drv);
|
|
const struct ssb_device_id *id;
|
|
|
|
for (id = ssb_drv->id_table;
|
|
id->vendor || id->coreid || id->revision;
|
|
id++) {
|
|
if (ssb_match_devid(id, &ssb_dev->id))
|
|
return 1; /* found */
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ssb_device_uevent(struct device *dev, struct kobj_uevent_env *env)
|
|
{
|
|
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
|
|
|
|
if (!dev)
|
|
return -ENODEV;
|
|
|
|
return add_uevent_var(env,
|
|
"MODALIAS=ssb:v%04Xid%04Xrev%02X",
|
|
ssb_dev->id.vendor, ssb_dev->id.coreid,
|
|
ssb_dev->id.revision);
|
|
}
|
|
|
|
static struct bus_type ssb_bustype = {
|
|
.name = "ssb",
|
|
.match = ssb_bus_match,
|
|
.probe = ssb_device_probe,
|
|
.remove = ssb_device_remove,
|
|
.shutdown = ssb_device_shutdown,
|
|
.suspend = ssb_device_suspend,
|
|
.resume = ssb_device_resume,
|
|
.uevent = ssb_device_uevent,
|
|
};
|
|
|
|
static void ssb_buses_lock(void)
|
|
{
|
|
/* See the comment at the ssb_is_early_boot definition */
|
|
if (!ssb_is_early_boot)
|
|
mutex_lock(&buses_mutex);
|
|
}
|
|
|
|
static void ssb_buses_unlock(void)
|
|
{
|
|
/* See the comment at the ssb_is_early_boot definition */
|
|
if (!ssb_is_early_boot)
|
|
mutex_unlock(&buses_mutex);
|
|
}
|
|
|
|
static void ssb_devices_unregister(struct ssb_bus *bus)
|
|
{
|
|
struct ssb_device *sdev;
|
|
int i;
|
|
|
|
for (i = bus->nr_devices - 1; i >= 0; i--) {
|
|
sdev = &(bus->devices[i]);
|
|
if (sdev->dev)
|
|
device_unregister(sdev->dev);
|
|
}
|
|
}
|
|
|
|
void ssb_bus_unregister(struct ssb_bus *bus)
|
|
{
|
|
ssb_buses_lock();
|
|
ssb_devices_unregister(bus);
|
|
list_del(&bus->list);
|
|
ssb_buses_unlock();
|
|
|
|
ssb_pcmcia_exit(bus);
|
|
ssb_pci_exit(bus);
|
|
ssb_iounmap(bus);
|
|
}
|
|
EXPORT_SYMBOL(ssb_bus_unregister);
|
|
|
|
static void ssb_release_dev(struct device *dev)
|
|
{
|
|
struct __ssb_dev_wrapper *devwrap;
|
|
|
|
devwrap = container_of(dev, struct __ssb_dev_wrapper, dev);
|
|
kfree(devwrap);
|
|
}
|
|
|
|
static int ssb_devices_register(struct ssb_bus *bus)
|
|
{
|
|
struct ssb_device *sdev;
|
|
struct device *dev;
|
|
struct __ssb_dev_wrapper *devwrap;
|
|
int i, err = 0;
|
|
int dev_idx = 0;
|
|
|
|
for (i = 0; i < bus->nr_devices; i++) {
|
|
sdev = &(bus->devices[i]);
|
|
|
|
/* We don't register SSB-system devices to the kernel,
|
|
* as the drivers for them are built into SSB. */
|
|
switch (sdev->id.coreid) {
|
|
case SSB_DEV_CHIPCOMMON:
|
|
case SSB_DEV_PCI:
|
|
case SSB_DEV_PCIE:
|
|
case SSB_DEV_PCMCIA:
|
|
case SSB_DEV_MIPS:
|
|
case SSB_DEV_MIPS_3302:
|
|
case SSB_DEV_EXTIF:
|
|
continue;
|
|
}
|
|
|
|
devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
|
|
if (!devwrap) {
|
|
ssb_printk(KERN_ERR PFX
|
|
"Could not allocate device\n");
|
|
err = -ENOMEM;
|
|
goto error;
|
|
}
|
|
dev = &devwrap->dev;
|
|
devwrap->sdev = sdev;
|
|
|
|
dev->release = ssb_release_dev;
|
|
dev->bus = &ssb_bustype;
|
|
dev_set_name(dev, "ssb%u:%d", bus->busnumber, dev_idx);
|
|
|
|
switch (bus->bustype) {
|
|
case SSB_BUSTYPE_PCI:
|
|
#ifdef CONFIG_SSB_PCIHOST
|
|
sdev->irq = bus->host_pci->irq;
|
|
dev->parent = &bus->host_pci->dev;
|
|
#endif
|
|
break;
|
|
case SSB_BUSTYPE_PCMCIA:
|
|
#ifdef CONFIG_SSB_PCMCIAHOST
|
|
sdev->irq = bus->host_pcmcia->irq.AssignedIRQ;
|
|
dev->parent = &bus->host_pcmcia->dev;
|
|
#endif
|
|
break;
|
|
case SSB_BUSTYPE_SDIO:
|
|
#ifdef CONFIG_SSB_SDIO
|
|
sdev->irq = bus->host_sdio->dev.irq;
|
|
dev->parent = &bus->host_sdio->dev;
|
|
#endif
|
|
break;
|
|
case SSB_BUSTYPE_SSB:
|
|
dev->dma_mask = &dev->coherent_dma_mask;
|
|
break;
|
|
}
|
|
|
|
sdev->dev = dev;
|
|
err = device_register(dev);
|
|
if (err) {
|
|
ssb_printk(KERN_ERR PFX
|
|
"Could not register %s\n",
|
|
dev_name(dev));
|
|
/* Set dev to NULL to not unregister
|
|
* dev on error unwinding. */
|
|
sdev->dev = NULL;
|
|
kfree(devwrap);
|
|
goto error;
|
|
}
|
|
dev_idx++;
|
|
}
|
|
|
|
return 0;
|
|
error:
|
|
/* Unwind the already registered devices. */
|
|
ssb_devices_unregister(bus);
|
|
return err;
|
|
}
|
|
|
|
/* Needs ssb_buses_lock() */
|
|
static int ssb_attach_queued_buses(void)
|
|
{
|
|
struct ssb_bus *bus, *n;
|
|
int err = 0;
|
|
int drop_them_all = 0;
|
|
|
|
list_for_each_entry_safe(bus, n, &attach_queue, list) {
|
|
if (drop_them_all) {
|
|
list_del(&bus->list);
|
|
continue;
|
|
}
|
|
/* Can't init the PCIcore in ssb_bus_register(), as that
|
|
* is too early in boot for embedded systems
|
|
* (no udelay() available). So do it here in attach stage.
|
|
*/
|
|
err = ssb_bus_powerup(bus, 0);
|
|
if (err)
|
|
goto error;
|
|
ssb_pcicore_init(&bus->pcicore);
|
|
ssb_bus_may_powerdown(bus);
|
|
|
|
err = ssb_devices_register(bus);
|
|
error:
|
|
if (err) {
|
|
drop_them_all = 1;
|
|
list_del(&bus->list);
|
|
continue;
|
|
}
|
|
list_move_tail(&bus->list, &buses);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static u8 ssb_ssb_read8(struct ssb_device *dev, u16 offset)
|
|
{
|
|
struct ssb_bus *bus = dev->bus;
|
|
|
|
offset += dev->core_index * SSB_CORE_SIZE;
|
|
return readb(bus->mmio + offset);
|
|
}
|
|
|
|
static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset)
|
|
{
|
|
struct ssb_bus *bus = dev->bus;
|
|
|
|
offset += dev->core_index * SSB_CORE_SIZE;
|
|
return readw(bus->mmio + offset);
|
|
}
|
|
|
|
static u32 ssb_ssb_read32(struct ssb_device *dev, u16 offset)
|
|
{
|
|
struct ssb_bus *bus = dev->bus;
|
|
|
|
offset += dev->core_index * SSB_CORE_SIZE;
|
|
return readl(bus->mmio + offset);
|
|
}
|
|
|
|
#ifdef CONFIG_SSB_BLOCKIO
|
|
static void ssb_ssb_block_read(struct ssb_device *dev, void *buffer,
|
|
size_t count, u16 offset, u8 reg_width)
|
|
{
|
|
struct ssb_bus *bus = dev->bus;
|
|
void __iomem *addr;
|
|
|
|
offset += dev->core_index * SSB_CORE_SIZE;
|
|
addr = bus->mmio + offset;
|
|
|
|
switch (reg_width) {
|
|
case sizeof(u8): {
|
|
u8 *buf = buffer;
|
|
|
|
while (count) {
|
|
*buf = __raw_readb(addr);
|
|
buf++;
|
|
count--;
|
|
}
|
|
break;
|
|
}
|
|
case sizeof(u16): {
|
|
__le16 *buf = buffer;
|
|
|
|
SSB_WARN_ON(count & 1);
|
|
while (count) {
|
|
*buf = (__force __le16)__raw_readw(addr);
|
|
buf++;
|
|
count -= 2;
|
|
}
|
|
break;
|
|
}
|
|
case sizeof(u32): {
|
|
__le32 *buf = buffer;
|
|
|
|
SSB_WARN_ON(count & 3);
|
|
while (count) {
|
|
*buf = (__force __le32)__raw_readl(addr);
|
|
buf++;
|
|
count -= 4;
|
|
}
|
|
break;
|
|
}
|
|
default:
|
|
SSB_WARN_ON(1);
|
|
}
|
|
}
|
|
#endif /* CONFIG_SSB_BLOCKIO */
|
|
|
|
static void ssb_ssb_write8(struct ssb_device *dev, u16 offset, u8 value)
|
|
{
|
|
struct ssb_bus *bus = dev->bus;
|
|
|
|
offset += dev->core_index * SSB_CORE_SIZE;
|
|
writeb(value, bus->mmio + offset);
|
|
}
|
|
|
|
static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
|
|
{
|
|
struct ssb_bus *bus = dev->bus;
|
|
|
|
offset += dev->core_index * SSB_CORE_SIZE;
|
|
writew(value, bus->mmio + offset);
|
|
}
|
|
|
|
static void ssb_ssb_write32(struct ssb_device *dev, u16 offset, u32 value)
|
|
{
|
|
struct ssb_bus *bus = dev->bus;
|
|
|
|
offset += dev->core_index * SSB_CORE_SIZE;
|
|
writel(value, bus->mmio + offset);
|
|
}
|
|
|
|
#ifdef CONFIG_SSB_BLOCKIO
|
|
static void ssb_ssb_block_write(struct ssb_device *dev, const void *buffer,
|
|
size_t count, u16 offset, u8 reg_width)
|
|
{
|
|
struct ssb_bus *bus = dev->bus;
|
|
void __iomem *addr;
|
|
|
|
offset += dev->core_index * SSB_CORE_SIZE;
|
|
addr = bus->mmio + offset;
|
|
|
|
switch (reg_width) {
|
|
case sizeof(u8): {
|
|
const u8 *buf = buffer;
|
|
|
|
while (count) {
|
|
__raw_writeb(*buf, addr);
|
|
buf++;
|
|
count--;
|
|
}
|
|
break;
|
|
}
|
|
case sizeof(u16): {
|
|
const __le16 *buf = buffer;
|
|
|
|
SSB_WARN_ON(count & 1);
|
|
while (count) {
|
|
__raw_writew((__force u16)(*buf), addr);
|
|
buf++;
|
|
count -= 2;
|
|
}
|
|
break;
|
|
}
|
|
case sizeof(u32): {
|
|
const __le32 *buf = buffer;
|
|
|
|
SSB_WARN_ON(count & 3);
|
|
while (count) {
|
|
__raw_writel((__force u32)(*buf), addr);
|
|
buf++;
|
|
count -= 4;
|
|
}
|
|
break;
|
|
}
|
|
default:
|
|
SSB_WARN_ON(1);
|
|
}
|
|
}
|
|
#endif /* CONFIG_SSB_BLOCKIO */
|
|
|
|
/* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */
|
|
static const struct ssb_bus_ops ssb_ssb_ops = {
|
|
.read8 = ssb_ssb_read8,
|
|
.read16 = ssb_ssb_read16,
|
|
.read32 = ssb_ssb_read32,
|
|
.write8 = ssb_ssb_write8,
|
|
.write16 = ssb_ssb_write16,
|
|
.write32 = ssb_ssb_write32,
|
|
#ifdef CONFIG_SSB_BLOCKIO
|
|
.block_read = ssb_ssb_block_read,
|
|
.block_write = ssb_ssb_block_write,
|
|
#endif
|
|
};
|
|
|
|
static int ssb_fetch_invariants(struct ssb_bus *bus,
|
|
ssb_invariants_func_t get_invariants)
|
|
{
|
|
struct ssb_init_invariants iv;
|
|
int err;
|
|
|
|
memset(&iv, 0, sizeof(iv));
|
|
err = get_invariants(bus, &iv);
|
|
if (err)
|
|
goto out;
|
|
memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo));
|
|
memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom));
|
|
bus->has_cardbus_slot = iv.has_cardbus_slot;
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int ssb_bus_register(struct ssb_bus *bus,
|
|
ssb_invariants_func_t get_invariants,
|
|
unsigned long baseaddr)
|
|
{
|
|
int err;
|
|
|
|
spin_lock_init(&bus->bar_lock);
|
|
INIT_LIST_HEAD(&bus->list);
|
|
#ifdef CONFIG_SSB_EMBEDDED
|
|
spin_lock_init(&bus->gpio_lock);
|
|
#endif
|
|
|
|
/* Powerup the bus */
|
|
err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
|
|
if (err)
|
|
goto out;
|
|
|
|
/* Init SDIO-host device (if any), before the scan */
|
|
err = ssb_sdio_init(bus);
|
|
if (err)
|
|
goto err_disable_xtal;
|
|
|
|
ssb_buses_lock();
|
|
bus->busnumber = next_busnumber;
|
|
/* Scan for devices (cores) */
|
|
err = ssb_bus_scan(bus, baseaddr);
|
|
if (err)
|
|
goto err_sdio_exit;
|
|
|
|
/* Init PCI-host device (if any) */
|
|
err = ssb_pci_init(bus);
|
|
if (err)
|
|
goto err_unmap;
|
|
/* Init PCMCIA-host device (if any) */
|
|
err = ssb_pcmcia_init(bus);
|
|
if (err)
|
|
goto err_pci_exit;
|
|
|
|
/* Initialize basic system devices (if available) */
|
|
err = ssb_bus_powerup(bus, 0);
|
|
if (err)
|
|
goto err_pcmcia_exit;
|
|
ssb_chipcommon_init(&bus->chipco);
|
|
ssb_mipscore_init(&bus->mipscore);
|
|
err = ssb_fetch_invariants(bus, get_invariants);
|
|
if (err) {
|
|
ssb_bus_may_powerdown(bus);
|
|
goto err_pcmcia_exit;
|
|
}
|
|
ssb_bus_may_powerdown(bus);
|
|
|
|
/* Queue it for attach.
|
|
* See the comment at the ssb_is_early_boot definition. */
|
|
list_add_tail(&bus->list, &attach_queue);
|
|
if (!ssb_is_early_boot) {
|
|
/* This is not early boot, so we must attach the bus now */
|
|
err = ssb_attach_queued_buses();
|
|
if (err)
|
|
goto err_dequeue;
|
|
}
|
|
next_busnumber++;
|
|
ssb_buses_unlock();
|
|
|
|
out:
|
|
return err;
|
|
|
|
err_dequeue:
|
|
list_del(&bus->list);
|
|
err_pcmcia_exit:
|
|
ssb_pcmcia_exit(bus);
|
|
err_pci_exit:
|
|
ssb_pci_exit(bus);
|
|
err_unmap:
|
|
ssb_iounmap(bus);
|
|
err_sdio_exit:
|
|
ssb_sdio_exit(bus);
|
|
err_disable_xtal:
|
|
ssb_buses_unlock();
|
|
ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
|
|
return err;
|
|
}
|
|
|
|
#ifdef CONFIG_SSB_PCIHOST
|
|
int ssb_bus_pcibus_register(struct ssb_bus *bus,
|
|
struct pci_dev *host_pci)
|
|
{
|
|
int err;
|
|
|
|
bus->bustype = SSB_BUSTYPE_PCI;
|
|
bus->host_pci = host_pci;
|
|
bus->ops = &ssb_pci_ops;
|
|
|
|
err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
|
|
if (!err) {
|
|
ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
|
|
"PCI device %s\n", dev_name(&host_pci->dev));
|
|
}
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(ssb_bus_pcibus_register);
|
|
#endif /* CONFIG_SSB_PCIHOST */
|
|
|
|
#ifdef CONFIG_SSB_PCMCIAHOST
|
|
int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
|
|
struct pcmcia_device *pcmcia_dev,
|
|
unsigned long baseaddr)
|
|
{
|
|
int err;
|
|
|
|
bus->bustype = SSB_BUSTYPE_PCMCIA;
|
|
bus->host_pcmcia = pcmcia_dev;
|
|
bus->ops = &ssb_pcmcia_ops;
|
|
|
|
err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
|
|
if (!err) {
|
|
ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
|
|
"PCMCIA device %s\n", pcmcia_dev->devname);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
|
|
#endif /* CONFIG_SSB_PCMCIAHOST */
|
|
|
|
#ifdef CONFIG_SSB_SDIOHOST
|
|
int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func,
|
|
unsigned int quirks)
|
|
{
|
|
int err;
|
|
|
|
bus->bustype = SSB_BUSTYPE_SDIO;
|
|
bus->host_sdio = func;
|
|
bus->ops = &ssb_sdio_ops;
|
|
bus->quirks = quirks;
|
|
|
|
err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
|
|
if (!err) {
|
|
ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
|
|
"SDIO device %s\n", sdio_func_id(func));
|
|
}
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(ssb_bus_sdiobus_register);
|
|
#endif /* CONFIG_SSB_PCMCIAHOST */
|
|
|
|
int ssb_bus_ssbbus_register(struct ssb_bus *bus,
|
|
unsigned long baseaddr,
|
|
ssb_invariants_func_t get_invariants)
|
|
{
|
|
int err;
|
|
|
|
bus->bustype = SSB_BUSTYPE_SSB;
|
|
bus->ops = &ssb_ssb_ops;
|
|
|
|
err = ssb_bus_register(bus, get_invariants, baseaddr);
|
|
if (!err) {
|
|
ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
|
|
"address 0x%08lX\n", baseaddr);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
int __ssb_driver_register(struct ssb_driver *drv, struct module *owner)
|
|
{
|
|
drv->drv.name = drv->name;
|
|
drv->drv.bus = &ssb_bustype;
|
|
drv->drv.owner = owner;
|
|
|
|
return driver_register(&drv->drv);
|
|
}
|
|
EXPORT_SYMBOL(__ssb_driver_register);
|
|
|
|
void ssb_driver_unregister(struct ssb_driver *drv)
|
|
{
|
|
driver_unregister(&drv->drv);
|
|
}
|
|
EXPORT_SYMBOL(ssb_driver_unregister);
|
|
|
|
void ssb_set_devtypedata(struct ssb_device *dev, void *data)
|
|
{
|
|
struct ssb_bus *bus = dev->bus;
|
|
struct ssb_device *ent;
|
|
int i;
|
|
|
|
for (i = 0; i < bus->nr_devices; i++) {
|
|
ent = &(bus->devices[i]);
|
|
if (ent->id.vendor != dev->id.vendor)
|
|
continue;
|
|
if (ent->id.coreid != dev->id.coreid)
|
|
continue;
|
|
|
|
ent->devtypedata = data;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(ssb_set_devtypedata);
|
|
|
|
static u32 clkfactor_f6_resolve(u32 v)
|
|
{
|
|
/* map the magic values */
|
|
switch (v) {
|
|
case SSB_CHIPCO_CLK_F6_2:
|
|
return 2;
|
|
case SSB_CHIPCO_CLK_F6_3:
|
|
return 3;
|
|
case SSB_CHIPCO_CLK_F6_4:
|
|
return 4;
|
|
case SSB_CHIPCO_CLK_F6_5:
|
|
return 5;
|
|
case SSB_CHIPCO_CLK_F6_6:
|
|
return 6;
|
|
case SSB_CHIPCO_CLK_F6_7:
|
|
return 7;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Calculate the speed the backplane would run at a given set of clockcontrol values */
|
|
u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m)
|
|
{
|
|
u32 n1, n2, clock, m1, m2, m3, mc;
|
|
|
|
n1 = (n & SSB_CHIPCO_CLK_N1);
|
|
n2 = ((n & SSB_CHIPCO_CLK_N2) >> SSB_CHIPCO_CLK_N2_SHIFT);
|
|
|
|
switch (plltype) {
|
|
case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
|
|
if (m & SSB_CHIPCO_CLK_T6_MMASK)
|
|
return SSB_CHIPCO_CLK_T6_M0;
|
|
return SSB_CHIPCO_CLK_T6_M1;
|
|
case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
|
|
case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
|
|
case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
|
|
case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
|
|
n1 = clkfactor_f6_resolve(n1);
|
|
n2 += SSB_CHIPCO_CLK_F5_BIAS;
|
|
break;
|
|
case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */
|
|
n1 += SSB_CHIPCO_CLK_T2_BIAS;
|
|
n2 += SSB_CHIPCO_CLK_T2_BIAS;
|
|
SSB_WARN_ON(!((n1 >= 2) && (n1 <= 7)));
|
|
SSB_WARN_ON(!((n2 >= 5) && (n2 <= 23)));
|
|
break;
|
|
case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */
|
|
return 100000000;
|
|
default:
|
|
SSB_WARN_ON(1);
|
|
}
|
|
|
|
switch (plltype) {
|
|
case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
|
|
case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
|
|
clock = SSB_CHIPCO_CLK_BASE2 * n1 * n2;
|
|
break;
|
|
default:
|
|
clock = SSB_CHIPCO_CLK_BASE1 * n1 * n2;
|
|
}
|
|
if (!clock)
|
|
return 0;
|
|
|
|
m1 = (m & SSB_CHIPCO_CLK_M1);
|
|
m2 = ((m & SSB_CHIPCO_CLK_M2) >> SSB_CHIPCO_CLK_M2_SHIFT);
|
|
m3 = ((m & SSB_CHIPCO_CLK_M3) >> SSB_CHIPCO_CLK_M3_SHIFT);
|
|
mc = ((m & SSB_CHIPCO_CLK_MC) >> SSB_CHIPCO_CLK_MC_SHIFT);
|
|
|
|
switch (plltype) {
|
|
case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
|
|
case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
|
|
case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
|
|
case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
|
|
m1 = clkfactor_f6_resolve(m1);
|
|
if ((plltype == SSB_PLLTYPE_1) ||
|
|
(plltype == SSB_PLLTYPE_3))
|
|
m2 += SSB_CHIPCO_CLK_F5_BIAS;
|
|
else
|
|
m2 = clkfactor_f6_resolve(m2);
|
|
m3 = clkfactor_f6_resolve(m3);
|
|
|
|
switch (mc) {
|
|
case SSB_CHIPCO_CLK_MC_BYPASS:
|
|
return clock;
|
|
case SSB_CHIPCO_CLK_MC_M1:
|
|
return (clock / m1);
|
|
case SSB_CHIPCO_CLK_MC_M1M2:
|
|
return (clock / (m1 * m2));
|
|
case SSB_CHIPCO_CLK_MC_M1M2M3:
|
|
return (clock / (m1 * m2 * m3));
|
|
case SSB_CHIPCO_CLK_MC_M1M3:
|
|
return (clock / (m1 * m3));
|
|
}
|
|
return 0;
|
|
case SSB_PLLTYPE_2:
|
|
m1 += SSB_CHIPCO_CLK_T2_BIAS;
|
|
m2 += SSB_CHIPCO_CLK_T2M2_BIAS;
|
|
m3 += SSB_CHIPCO_CLK_T2_BIAS;
|
|
SSB_WARN_ON(!((m1 >= 2) && (m1 <= 7)));
|
|
SSB_WARN_ON(!((m2 >= 3) && (m2 <= 10)));
|
|
SSB_WARN_ON(!((m3 >= 2) && (m3 <= 7)));
|
|
|
|
if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP))
|
|
clock /= m1;
|
|
if (!(mc & SSB_CHIPCO_CLK_T2MC_M2BYP))
|
|
clock /= m2;
|
|
if (!(mc & SSB_CHIPCO_CLK_T2MC_M3BYP))
|
|
clock /= m3;
|
|
return clock;
|
|
default:
|
|
SSB_WARN_ON(1);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Get the current speed the backplane is running at */
|
|
u32 ssb_clockspeed(struct ssb_bus *bus)
|
|
{
|
|
u32 rate;
|
|
u32 plltype;
|
|
u32 clkctl_n, clkctl_m;
|
|
|
|
if (ssb_extif_available(&bus->extif))
|
|
ssb_extif_get_clockcontrol(&bus->extif, &plltype,
|
|
&clkctl_n, &clkctl_m);
|
|
else if (bus->chipco.dev)
|
|
ssb_chipco_get_clockcontrol(&bus->chipco, &plltype,
|
|
&clkctl_n, &clkctl_m);
|
|
else
|
|
return 0;
|
|
|
|
if (bus->chip_id == 0x5365) {
|
|
rate = 100000000;
|
|
} else {
|
|
rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
|
|
if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */
|
|
rate /= 2;
|
|
}
|
|
|
|
return rate;
|
|
}
|
|
EXPORT_SYMBOL(ssb_clockspeed);
|
|
|
|
static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev)
|
|
{
|
|
u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;
|
|
|
|
/* The REJECT bit changed position in TMSLOW between
|
|
* Backplane revisions. */
|
|
switch (rev) {
|
|
case SSB_IDLOW_SSBREV_22:
|
|
return SSB_TMSLOW_REJECT_22;
|
|
case SSB_IDLOW_SSBREV_23:
|
|
return SSB_TMSLOW_REJECT_23;
|
|
case SSB_IDLOW_SSBREV_24: /* TODO - find the proper REJECT bits */
|
|
case SSB_IDLOW_SSBREV_25: /* same here */
|
|
case SSB_IDLOW_SSBREV_26: /* same here */
|
|
case SSB_IDLOW_SSBREV_27: /* same here */
|
|
return SSB_TMSLOW_REJECT_23; /* this is a guess */
|
|
default:
|
|
printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
|
|
WARN_ON(1);
|
|
}
|
|
return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23);
|
|
}
|
|
|
|
int ssb_device_is_enabled(struct ssb_device *dev)
|
|
{
|
|
u32 val;
|
|
u32 reject;
|
|
|
|
reject = ssb_tmslow_reject_bitmask(dev);
|
|
val = ssb_read32(dev, SSB_TMSLOW);
|
|
val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | reject;
|
|
|
|
return (val == SSB_TMSLOW_CLOCK);
|
|
}
|
|
EXPORT_SYMBOL(ssb_device_is_enabled);
|
|
|
|
static void ssb_flush_tmslow(struct ssb_device *dev)
|
|
{
|
|
/* Make _really_ sure the device has finished the TMSLOW
|
|
* register write transaction, as we risk running into
|
|
* a machine check exception otherwise.
|
|
* Do this by reading the register back to commit the
|
|
* PCI write and delay an additional usec for the device
|
|
* to react to the change. */
|
|
ssb_read32(dev, SSB_TMSLOW);
|
|
udelay(1);
|
|
}
|
|
|
|
void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags)
|
|
{
|
|
u32 val;
|
|
|
|
ssb_device_disable(dev, core_specific_flags);
|
|
ssb_write32(dev, SSB_TMSLOW,
|
|
SSB_TMSLOW_RESET | SSB_TMSLOW_CLOCK |
|
|
SSB_TMSLOW_FGC | core_specific_flags);
|
|
ssb_flush_tmslow(dev);
|
|
|
|
/* Clear SERR if set. This is a hw bug workaround. */
|
|
if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_SERR)
|
|
ssb_write32(dev, SSB_TMSHIGH, 0);
|
|
|
|
val = ssb_read32(dev, SSB_IMSTATE);
|
|
if (val & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) {
|
|
val &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO);
|
|
ssb_write32(dev, SSB_IMSTATE, val);
|
|
}
|
|
|
|
ssb_write32(dev, SSB_TMSLOW,
|
|
SSB_TMSLOW_CLOCK | SSB_TMSLOW_FGC |
|
|
core_specific_flags);
|
|
ssb_flush_tmslow(dev);
|
|
|
|
ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_CLOCK |
|
|
core_specific_flags);
|
|
ssb_flush_tmslow(dev);
|
|
}
|
|
EXPORT_SYMBOL(ssb_device_enable);
|
|
|
|
/* Wait for a bit in a register to get set or unset.
|
|
* timeout is in units of ten-microseconds */
|
|
static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask,
|
|
int timeout, int set)
|
|
{
|
|
int i;
|
|
u32 val;
|
|
|
|
for (i = 0; i < timeout; i++) {
|
|
val = ssb_read32(dev, reg);
|
|
if (set) {
|
|
if (val & bitmask)
|
|
return 0;
|
|
} else {
|
|
if (!(val & bitmask))
|
|
return 0;
|
|
}
|
|
udelay(10);
|
|
}
|
|
printk(KERN_ERR PFX "Timeout waiting for bitmask %08X on "
|
|
"register %04X to %s.\n",
|
|
bitmask, reg, (set ? "set" : "clear"));
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
|
|
{
|
|
u32 reject;
|
|
|
|
if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
|
|
return;
|
|
|
|
reject = ssb_tmslow_reject_bitmask(dev);
|
|
ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
|
|
ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1);
|
|
ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
|
|
ssb_write32(dev, SSB_TMSLOW,
|
|
SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
|
|
reject | SSB_TMSLOW_RESET |
|
|
core_specific_flags);
|
|
ssb_flush_tmslow(dev);
|
|
|
|
ssb_write32(dev, SSB_TMSLOW,
|
|
reject | SSB_TMSLOW_RESET |
|
|
core_specific_flags);
|
|
ssb_flush_tmslow(dev);
|
|
}
|
|
EXPORT_SYMBOL(ssb_device_disable);
|
|
|
|
u32 ssb_dma_translation(struct ssb_device *dev)
|
|
{
|
|
switch (dev->bus->bustype) {
|
|
case SSB_BUSTYPE_SSB:
|
|
return 0;
|
|
case SSB_BUSTYPE_PCI:
|
|
return SSB_PCI_DMA;
|
|
default:
|
|
__ssb_dma_not_implemented(dev);
|
|
}
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(ssb_dma_translation);
|
|
|
|
int ssb_dma_set_mask(struct ssb_device *dev, u64 mask)
|
|
{
|
|
#ifdef CONFIG_SSB_PCIHOST
|
|
int err;
|
|
#endif
|
|
|
|
switch (dev->bus->bustype) {
|
|
case SSB_BUSTYPE_PCI:
|
|
#ifdef CONFIG_SSB_PCIHOST
|
|
err = pci_set_dma_mask(dev->bus->host_pci, mask);
|
|
if (err)
|
|
return err;
|
|
err = pci_set_consistent_dma_mask(dev->bus->host_pci, mask);
|
|
return err;
|
|
#endif
|
|
case SSB_BUSTYPE_SSB:
|
|
return dma_set_mask(dev->dev, mask);
|
|
default:
|
|
__ssb_dma_not_implemented(dev);
|
|
}
|
|
return -ENOSYS;
|
|
}
|
|
EXPORT_SYMBOL(ssb_dma_set_mask);
|
|
|
|
void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size,
|
|
dma_addr_t *dma_handle, gfp_t gfp_flags)
|
|
{
|
|
switch (dev->bus->bustype) {
|
|
case SSB_BUSTYPE_PCI:
|
|
#ifdef CONFIG_SSB_PCIHOST
|
|
if (gfp_flags & GFP_DMA) {
|
|
/* Workaround: The PCI API does not support passing
|
|
* a GFP flag. */
|
|
return dma_alloc_coherent(&dev->bus->host_pci->dev,
|
|
size, dma_handle, gfp_flags);
|
|
}
|
|
return pci_alloc_consistent(dev->bus->host_pci, size, dma_handle);
|
|
#endif
|
|
case SSB_BUSTYPE_SSB:
|
|
return dma_alloc_coherent(dev->dev, size, dma_handle, gfp_flags);
|
|
default:
|
|
__ssb_dma_not_implemented(dev);
|
|
}
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL(ssb_dma_alloc_consistent);
|
|
|
|
void ssb_dma_free_consistent(struct ssb_device *dev, size_t size,
|
|
void *vaddr, dma_addr_t dma_handle,
|
|
gfp_t gfp_flags)
|
|
{
|
|
switch (dev->bus->bustype) {
|
|
case SSB_BUSTYPE_PCI:
|
|
#ifdef CONFIG_SSB_PCIHOST
|
|
if (gfp_flags & GFP_DMA) {
|
|
/* Workaround: The PCI API does not support passing
|
|
* a GFP flag. */
|
|
dma_free_coherent(&dev->bus->host_pci->dev,
|
|
size, vaddr, dma_handle);
|
|
return;
|
|
}
|
|
pci_free_consistent(dev->bus->host_pci, size,
|
|
vaddr, dma_handle);
|
|
return;
|
|
#endif
|
|
case SSB_BUSTYPE_SSB:
|
|
dma_free_coherent(dev->dev, size, vaddr, dma_handle);
|
|
return;
|
|
default:
|
|
__ssb_dma_not_implemented(dev);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(ssb_dma_free_consistent);
|
|
|
|
int ssb_bus_may_powerdown(struct ssb_bus *bus)
|
|
{
|
|
struct ssb_chipcommon *cc;
|
|
int err = 0;
|
|
|
|
/* On buses where more than one core may be working
|
|
* at a time, we must not powerdown stuff if there are
|
|
* still cores that may want to run. */
|
|
if (bus->bustype == SSB_BUSTYPE_SSB)
|
|
goto out;
|
|
|
|
cc = &bus->chipco;
|
|
|
|
if (!cc->dev)
|
|
goto out;
|
|
if (cc->dev->id.revision < 5)
|
|
goto out;
|
|
|
|
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
|
|
err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
|
|
if (err)
|
|
goto error;
|
|
out:
|
|
#ifdef CONFIG_SSB_DEBUG
|
|
bus->powered_up = 0;
|
|
#endif
|
|
return err;
|
|
error:
|
|
ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
|
|
goto out;
|
|
}
|
|
EXPORT_SYMBOL(ssb_bus_may_powerdown);
|
|
|
|
int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
|
|
{
|
|
struct ssb_chipcommon *cc;
|
|
int err;
|
|
enum ssb_clkmode mode;
|
|
|
|
err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
|
|
if (err)
|
|
goto error;
|
|
cc = &bus->chipco;
|
|
mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
|
|
ssb_chipco_set_clockmode(cc, mode);
|
|
|
|
#ifdef CONFIG_SSB_DEBUG
|
|
bus->powered_up = 1;
|
|
#endif
|
|
return 0;
|
|
error:
|
|
ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(ssb_bus_powerup);
|
|
|
|
u32 ssb_admatch_base(u32 adm)
|
|
{
|
|
u32 base = 0;
|
|
|
|
switch (adm & SSB_ADM_TYPE) {
|
|
case SSB_ADM_TYPE0:
|
|
base = (adm & SSB_ADM_BASE0);
|
|
break;
|
|
case SSB_ADM_TYPE1:
|
|
SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
|
|
base = (adm & SSB_ADM_BASE1);
|
|
break;
|
|
case SSB_ADM_TYPE2:
|
|
SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
|
|
base = (adm & SSB_ADM_BASE2);
|
|
break;
|
|
default:
|
|
SSB_WARN_ON(1);
|
|
}
|
|
|
|
return base;
|
|
}
|
|
EXPORT_SYMBOL(ssb_admatch_base);
|
|
|
|
u32 ssb_admatch_size(u32 adm)
|
|
{
|
|
u32 size = 0;
|
|
|
|
switch (adm & SSB_ADM_TYPE) {
|
|
case SSB_ADM_TYPE0:
|
|
size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT);
|
|
break;
|
|
case SSB_ADM_TYPE1:
|
|
SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
|
|
size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT);
|
|
break;
|
|
case SSB_ADM_TYPE2:
|
|
SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
|
|
size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT);
|
|
break;
|
|
default:
|
|
SSB_WARN_ON(1);
|
|
}
|
|
size = (1 << (size + 1));
|
|
|
|
return size;
|
|
}
|
|
EXPORT_SYMBOL(ssb_admatch_size);
|
|
|
|
static int __init ssb_modinit(void)
|
|
{
|
|
int err;
|
|
|
|
/* See the comment at the ssb_is_early_boot definition */
|
|
ssb_is_early_boot = 0;
|
|
err = bus_register(&ssb_bustype);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Maybe we already registered some buses at early boot.
|
|
* Check for this and attach them
|
|
*/
|
|
ssb_buses_lock();
|
|
err = ssb_attach_queued_buses();
|
|
ssb_buses_unlock();
|
|
if (err) {
|
|
bus_unregister(&ssb_bustype);
|
|
goto out;
|
|
}
|
|
|
|
err = b43_pci_ssb_bridge_init();
|
|
if (err) {
|
|
ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
|
|
"initialization failed\n");
|
|
/* don't fail SSB init because of this */
|
|
err = 0;
|
|
}
|
|
err = ssb_gige_init();
|
|
if (err) {
|
|
ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
|
|
"driver initialization failed\n");
|
|
/* don't fail SSB init because of this */
|
|
err = 0;
|
|
}
|
|
out:
|
|
return err;
|
|
}
|
|
/* ssb must be initialized after PCI but before the ssb drivers.
|
|
* That means we must use some initcall between subsys_initcall
|
|
* and device_initcall. */
|
|
fs_initcall(ssb_modinit);
|
|
|
|
static void __exit ssb_modexit(void)
|
|
{
|
|
ssb_gige_exit();
|
|
b43_pci_ssb_bridge_exit();
|
|
bus_unregister(&ssb_bustype);
|
|
}
|
|
module_exit(ssb_modexit)
|