mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 00:04:15 +08:00
384461abca
Instead of requiring each driver to care for assigning the owner member of struct pwm_ops, handle that implicitly using a macro. Note that the owner member has to be moved to struct pwm_chip, as the ops structure usually lives in read-only memory and so cannot be modified. The upside is that new low level drivers cannot forget the assignment and save one line each. The pwm-crc driver didn't assign .owner, that's not a problem in practice though as the driver cannot be compiled as a module. Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # Intel LPSS Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> # pwm-{bcm,brcm}*.c Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> # sun4i Acked-by: Andi Shyti <andi.shyti@kernel.org> Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> # pwm-visconti Acked-by: Heiko Stuebner <heiko@sntech.de> # pwm-rockchip Acked-by: Michael Walle <michael@walle.cc> # pwm-sl28cpld Acked-by: Neil Armstrong <neil.armstrong@linaro.org> # pwm-meson Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230804142707.412137-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
180 lines
4.4 KiB
C
180 lines
4.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2012 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/stmp_device.h>
|
|
|
|
#define SET 0x4
|
|
#define CLR 0x8
|
|
#define TOG 0xc
|
|
|
|
#define PWM_CTRL 0x0
|
|
#define PWM_ACTIVE0 0x10
|
|
#define PWM_PERIOD0 0x20
|
|
#define PERIOD_PERIOD(p) ((p) & 0xffff)
|
|
#define PERIOD_PERIOD_MAX 0x10000
|
|
#define PERIOD_ACTIVE_HIGH (3 << 16)
|
|
#define PERIOD_ACTIVE_LOW (2 << 16)
|
|
#define PERIOD_INACTIVE_HIGH (3 << 18)
|
|
#define PERIOD_INACTIVE_LOW (2 << 18)
|
|
#define PERIOD_POLARITY_NORMAL (PERIOD_ACTIVE_HIGH | PERIOD_INACTIVE_LOW)
|
|
#define PERIOD_POLARITY_INVERSE (PERIOD_ACTIVE_LOW | PERIOD_INACTIVE_HIGH)
|
|
#define PERIOD_CDIV(div) (((div) & 0x7) << 20)
|
|
#define PERIOD_CDIV_MAX 8
|
|
|
|
static const u8 cdiv_shift[PERIOD_CDIV_MAX] = {
|
|
0, 1, 2, 3, 4, 6, 8, 10
|
|
};
|
|
|
|
struct mxs_pwm_chip {
|
|
struct pwm_chip chip;
|
|
struct clk *clk;
|
|
void __iomem *base;
|
|
};
|
|
|
|
#define to_mxs_pwm_chip(_chip) container_of(_chip, struct mxs_pwm_chip, chip)
|
|
|
|
static int mxs_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
const struct pwm_state *state)
|
|
{
|
|
struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip);
|
|
int ret, div = 0;
|
|
unsigned int period_cycles, duty_cycles;
|
|
unsigned long rate;
|
|
unsigned long long c;
|
|
unsigned int pol_bits;
|
|
|
|
/*
|
|
* If the PWM channel is disabled, make sure to turn on the
|
|
* clock before calling clk_get_rate() and writing to the
|
|
* registers. Otherwise, just keep it enabled.
|
|
*/
|
|
if (!pwm_is_enabled(pwm)) {
|
|
ret = clk_prepare_enable(mxs->clk);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (!state->enabled && pwm_is_enabled(pwm))
|
|
writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + CLR);
|
|
|
|
rate = clk_get_rate(mxs->clk);
|
|
while (1) {
|
|
c = rate >> cdiv_shift[div];
|
|
c = c * state->period;
|
|
do_div(c, 1000000000);
|
|
if (c < PERIOD_PERIOD_MAX)
|
|
break;
|
|
div++;
|
|
if (div >= PERIOD_CDIV_MAX)
|
|
return -EINVAL;
|
|
}
|
|
|
|
period_cycles = c;
|
|
c *= state->duty_cycle;
|
|
do_div(c, state->period);
|
|
duty_cycles = c;
|
|
|
|
/*
|
|
* The data sheet the says registers must be written to in
|
|
* this order (ACTIVEn, then PERIODn). Also, the new settings
|
|
* only take effect at the beginning of a new period, avoiding
|
|
* glitches.
|
|
*/
|
|
|
|
pol_bits = state->polarity == PWM_POLARITY_NORMAL ?
|
|
PERIOD_POLARITY_NORMAL : PERIOD_POLARITY_INVERSE;
|
|
writel(duty_cycles << 16,
|
|
mxs->base + PWM_ACTIVE0 + pwm->hwpwm * 0x20);
|
|
writel(PERIOD_PERIOD(period_cycles) | pol_bits | PERIOD_CDIV(div),
|
|
mxs->base + PWM_PERIOD0 + pwm->hwpwm * 0x20);
|
|
|
|
if (state->enabled) {
|
|
if (!pwm_is_enabled(pwm)) {
|
|
/*
|
|
* The clock was enabled above. Just enable
|
|
* the channel in the control register.
|
|
*/
|
|
writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + SET);
|
|
}
|
|
} else {
|
|
clk_disable_unprepare(mxs->clk);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_ops mxs_pwm_ops = {
|
|
.apply = mxs_pwm_apply,
|
|
};
|
|
|
|
static int mxs_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct mxs_pwm_chip *mxs;
|
|
int ret;
|
|
|
|
mxs = devm_kzalloc(&pdev->dev, sizeof(*mxs), GFP_KERNEL);
|
|
if (!mxs)
|
|
return -ENOMEM;
|
|
|
|
mxs->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(mxs->base))
|
|
return PTR_ERR(mxs->base);
|
|
|
|
mxs->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(mxs->clk))
|
|
return PTR_ERR(mxs->clk);
|
|
|
|
mxs->chip.dev = &pdev->dev;
|
|
mxs->chip.ops = &mxs_pwm_ops;
|
|
|
|
ret = of_property_read_u32(np, "fsl,pwm-number", &mxs->chip.npwm);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to get pwm number: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* FIXME: Only do this if the PWM isn't already running */
|
|
ret = stmp_reset_block(mxs->base);
|
|
if (ret)
|
|
return dev_err_probe(&pdev->dev, ret, "failed to reset PWM\n");
|
|
|
|
ret = devm_pwmchip_add(&pdev->dev, &mxs->chip);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to add pwm chip %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id mxs_pwm_dt_ids[] = {
|
|
{ .compatible = "fsl,imx23-pwm", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mxs_pwm_dt_ids);
|
|
|
|
static struct platform_driver mxs_pwm_driver = {
|
|
.driver = {
|
|
.name = "mxs-pwm",
|
|
.of_match_table = mxs_pwm_dt_ids,
|
|
},
|
|
.probe = mxs_pwm_probe,
|
|
};
|
|
module_platform_driver(mxs_pwm_driver);
|
|
|
|
MODULE_ALIAS("platform:mxs-pwm");
|
|
MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
|
|
MODULE_DESCRIPTION("Freescale MXS PWM Driver");
|
|
MODULE_LICENSE("GPL v2");
|