mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 01:54:09 +08:00
94e4603d1a
The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code, the error handling paths and avoid the need of a dedicated function used with devm_add_action_or_reset(). As a side effect, some error messages are not logged anymore, so also use dev_err_probe() instead of dev_err() in case of error. At least the error code will be logged (and -EPROBE_DEFER will be filtered) Based on my test with allyesconfig, this reduces the .o size from: text data bss dec hex filename 9025 2488 128 11641 2d79 drivers/rtc/rtc-jz4740.o down to: 8267 2080 128 10475 28eb drivers/rtc/rtc-jz4740.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/af10570000d7e103d70bbea590ce8df4f8902b67.1661330532.git.christophe.jaillet@wanadoo.fr Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
396 lines
9.5 KiB
C
396 lines
9.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
|
|
* Copyright (C) 2010, Paul Cercueil <paul@crapouillou.net>
|
|
* JZ4740 SoC RTC driver
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_wakeirq.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#define JZ_REG_RTC_CTRL 0x00
|
|
#define JZ_REG_RTC_SEC 0x04
|
|
#define JZ_REG_RTC_SEC_ALARM 0x08
|
|
#define JZ_REG_RTC_REGULATOR 0x0C
|
|
#define JZ_REG_RTC_HIBERNATE 0x20
|
|
#define JZ_REG_RTC_WAKEUP_FILTER 0x24
|
|
#define JZ_REG_RTC_RESET_COUNTER 0x28
|
|
#define JZ_REG_RTC_SCRATCHPAD 0x34
|
|
|
|
/* The following are present on the jz4780 */
|
|
#define JZ_REG_RTC_WENR 0x3C
|
|
#define JZ_RTC_WENR_WEN BIT(31)
|
|
|
|
#define JZ_RTC_CTRL_WRDY BIT(7)
|
|
#define JZ_RTC_CTRL_1HZ BIT(6)
|
|
#define JZ_RTC_CTRL_1HZ_IRQ BIT(5)
|
|
#define JZ_RTC_CTRL_AF BIT(4)
|
|
#define JZ_RTC_CTRL_AF_IRQ BIT(3)
|
|
#define JZ_RTC_CTRL_AE BIT(2)
|
|
#define JZ_RTC_CTRL_ENABLE BIT(0)
|
|
|
|
/* Magic value to enable writes on jz4780 */
|
|
#define JZ_RTC_WENR_MAGIC 0xA55A
|
|
|
|
#define JZ_RTC_WAKEUP_FILTER_MASK 0x0000FFE0
|
|
#define JZ_RTC_RESET_COUNTER_MASK 0x00000FE0
|
|
|
|
enum jz4740_rtc_type {
|
|
ID_JZ4740,
|
|
ID_JZ4760,
|
|
ID_JZ4780,
|
|
};
|
|
|
|
struct jz4740_rtc {
|
|
void __iomem *base;
|
|
enum jz4740_rtc_type type;
|
|
|
|
struct rtc_device *rtc;
|
|
|
|
spinlock_t lock;
|
|
};
|
|
|
|
static struct device *dev_for_power_off;
|
|
|
|
static inline uint32_t jz4740_rtc_reg_read(struct jz4740_rtc *rtc, size_t reg)
|
|
{
|
|
return readl(rtc->base + reg);
|
|
}
|
|
|
|
static int jz4740_rtc_wait_write_ready(struct jz4740_rtc *rtc)
|
|
{
|
|
uint32_t ctrl;
|
|
int timeout = 10000;
|
|
|
|
do {
|
|
ctrl = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_CTRL);
|
|
} while (!(ctrl & JZ_RTC_CTRL_WRDY) && --timeout);
|
|
|
|
return timeout ? 0 : -EIO;
|
|
}
|
|
|
|
static inline int jz4780_rtc_enable_write(struct jz4740_rtc *rtc)
|
|
{
|
|
uint32_t ctrl;
|
|
int ret, timeout = 10000;
|
|
|
|
ret = jz4740_rtc_wait_write_ready(rtc);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
writel(JZ_RTC_WENR_MAGIC, rtc->base + JZ_REG_RTC_WENR);
|
|
|
|
do {
|
|
ctrl = readl(rtc->base + JZ_REG_RTC_WENR);
|
|
} while (!(ctrl & JZ_RTC_WENR_WEN) && --timeout);
|
|
|
|
return timeout ? 0 : -EIO;
|
|
}
|
|
|
|
static inline int jz4740_rtc_reg_write(struct jz4740_rtc *rtc, size_t reg,
|
|
uint32_t val)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (rtc->type >= ID_JZ4760)
|
|
ret = jz4780_rtc_enable_write(rtc);
|
|
if (ret == 0)
|
|
ret = jz4740_rtc_wait_write_ready(rtc);
|
|
if (ret == 0)
|
|
writel(val, rtc->base + reg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int jz4740_rtc_ctrl_set_bits(struct jz4740_rtc *rtc, uint32_t mask,
|
|
bool set)
|
|
{
|
|
int ret;
|
|
unsigned long flags;
|
|
uint32_t ctrl;
|
|
|
|
spin_lock_irqsave(&rtc->lock, flags);
|
|
|
|
ctrl = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_CTRL);
|
|
|
|
/* Don't clear interrupt flags by accident */
|
|
ctrl |= JZ_RTC_CTRL_1HZ | JZ_RTC_CTRL_AF;
|
|
|
|
if (set)
|
|
ctrl |= mask;
|
|
else
|
|
ctrl &= ~mask;
|
|
|
|
ret = jz4740_rtc_reg_write(rtc, JZ_REG_RTC_CTRL, ctrl);
|
|
|
|
spin_unlock_irqrestore(&rtc->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int jz4740_rtc_read_time(struct device *dev, struct rtc_time *time)
|
|
{
|
|
struct jz4740_rtc *rtc = dev_get_drvdata(dev);
|
|
uint32_t secs, secs2;
|
|
int timeout = 5;
|
|
|
|
if (jz4740_rtc_reg_read(rtc, JZ_REG_RTC_SCRATCHPAD) != 0x12345678)
|
|
return -EINVAL;
|
|
|
|
/* If the seconds register is read while it is updated, it can contain a
|
|
* bogus value. This can be avoided by making sure that two consecutive
|
|
* reads have the same value.
|
|
*/
|
|
secs = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_SEC);
|
|
secs2 = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_SEC);
|
|
|
|
while (secs != secs2 && --timeout) {
|
|
secs = secs2;
|
|
secs2 = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_SEC);
|
|
}
|
|
|
|
if (timeout == 0)
|
|
return -EIO;
|
|
|
|
rtc_time64_to_tm(secs, time);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int jz4740_rtc_set_time(struct device *dev, struct rtc_time *time)
|
|
{
|
|
struct jz4740_rtc *rtc = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = jz4740_rtc_reg_write(rtc, JZ_REG_RTC_SEC, rtc_tm_to_time64(time));
|
|
if (ret)
|
|
return ret;
|
|
|
|
return jz4740_rtc_reg_write(rtc, JZ_REG_RTC_SCRATCHPAD, 0x12345678);
|
|
}
|
|
|
|
static int jz4740_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct jz4740_rtc *rtc = dev_get_drvdata(dev);
|
|
uint32_t secs;
|
|
uint32_t ctrl;
|
|
|
|
secs = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_SEC_ALARM);
|
|
|
|
ctrl = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_CTRL);
|
|
|
|
alrm->enabled = !!(ctrl & JZ_RTC_CTRL_AE);
|
|
alrm->pending = !!(ctrl & JZ_RTC_CTRL_AF);
|
|
|
|
rtc_time64_to_tm(secs, &alrm->time);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int jz4740_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
int ret;
|
|
struct jz4740_rtc *rtc = dev_get_drvdata(dev);
|
|
uint32_t secs = lower_32_bits(rtc_tm_to_time64(&alrm->time));
|
|
|
|
ret = jz4740_rtc_reg_write(rtc, JZ_REG_RTC_SEC_ALARM, secs);
|
|
if (!ret)
|
|
ret = jz4740_rtc_ctrl_set_bits(rtc,
|
|
JZ_RTC_CTRL_AE | JZ_RTC_CTRL_AF_IRQ, alrm->enabled);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int jz4740_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
|
|
{
|
|
struct jz4740_rtc *rtc = dev_get_drvdata(dev);
|
|
return jz4740_rtc_ctrl_set_bits(rtc, JZ_RTC_CTRL_AF_IRQ, enable);
|
|
}
|
|
|
|
static const struct rtc_class_ops jz4740_rtc_ops = {
|
|
.read_time = jz4740_rtc_read_time,
|
|
.set_time = jz4740_rtc_set_time,
|
|
.read_alarm = jz4740_rtc_read_alarm,
|
|
.set_alarm = jz4740_rtc_set_alarm,
|
|
.alarm_irq_enable = jz4740_rtc_alarm_irq_enable,
|
|
};
|
|
|
|
static irqreturn_t jz4740_rtc_irq(int irq, void *data)
|
|
{
|
|
struct jz4740_rtc *rtc = data;
|
|
uint32_t ctrl;
|
|
unsigned long events = 0;
|
|
|
|
ctrl = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_CTRL);
|
|
|
|
if (ctrl & JZ_RTC_CTRL_1HZ)
|
|
events |= (RTC_UF | RTC_IRQF);
|
|
|
|
if (ctrl & JZ_RTC_CTRL_AF)
|
|
events |= (RTC_AF | RTC_IRQF);
|
|
|
|
rtc_update_irq(rtc->rtc, 1, events);
|
|
|
|
jz4740_rtc_ctrl_set_bits(rtc, JZ_RTC_CTRL_1HZ | JZ_RTC_CTRL_AF, false);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void jz4740_rtc_poweroff(struct device *dev)
|
|
{
|
|
struct jz4740_rtc *rtc = dev_get_drvdata(dev);
|
|
jz4740_rtc_reg_write(rtc, JZ_REG_RTC_HIBERNATE, 1);
|
|
}
|
|
|
|
static void jz4740_rtc_power_off(void)
|
|
{
|
|
jz4740_rtc_poweroff(dev_for_power_off);
|
|
kernel_halt();
|
|
}
|
|
|
|
static const struct of_device_id jz4740_rtc_of_match[] = {
|
|
{ .compatible = "ingenic,jz4740-rtc", .data = (void *)ID_JZ4740 },
|
|
{ .compatible = "ingenic,jz4760-rtc", .data = (void *)ID_JZ4760 },
|
|
{ .compatible = "ingenic,jz4780-rtc", .data = (void *)ID_JZ4780 },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, jz4740_rtc_of_match);
|
|
|
|
static void jz4740_rtc_set_wakeup_params(struct jz4740_rtc *rtc,
|
|
struct device_node *np,
|
|
unsigned long rate)
|
|
{
|
|
unsigned long wakeup_ticks, reset_ticks;
|
|
unsigned int min_wakeup_pin_assert_time = 60; /* Default: 60ms */
|
|
unsigned int reset_pin_assert_time = 100; /* Default: 100ms */
|
|
|
|
of_property_read_u32(np, "ingenic,reset-pin-assert-time-ms",
|
|
&reset_pin_assert_time);
|
|
of_property_read_u32(np, "ingenic,min-wakeup-pin-assert-time-ms",
|
|
&min_wakeup_pin_assert_time);
|
|
|
|
/*
|
|
* Set minimum wakeup pin assertion time: 100 ms.
|
|
* Range is 0 to 2 sec if RTC is clocked at 32 kHz.
|
|
*/
|
|
wakeup_ticks = (min_wakeup_pin_assert_time * rate) / 1000;
|
|
if (wakeup_ticks < JZ_RTC_WAKEUP_FILTER_MASK)
|
|
wakeup_ticks &= JZ_RTC_WAKEUP_FILTER_MASK;
|
|
else
|
|
wakeup_ticks = JZ_RTC_WAKEUP_FILTER_MASK;
|
|
jz4740_rtc_reg_write(rtc, JZ_REG_RTC_WAKEUP_FILTER, wakeup_ticks);
|
|
|
|
/*
|
|
* Set reset pin low-level assertion time after wakeup: 60 ms.
|
|
* Range is 0 to 125 ms if RTC is clocked at 32 kHz.
|
|
*/
|
|
reset_ticks = (reset_pin_assert_time * rate) / 1000;
|
|
if (reset_ticks < JZ_RTC_RESET_COUNTER_MASK)
|
|
reset_ticks &= JZ_RTC_RESET_COUNTER_MASK;
|
|
else
|
|
reset_ticks = JZ_RTC_RESET_COUNTER_MASK;
|
|
jz4740_rtc_reg_write(rtc, JZ_REG_RTC_RESET_COUNTER, reset_ticks);
|
|
}
|
|
|
|
static int jz4740_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev->of_node;
|
|
struct jz4740_rtc *rtc;
|
|
unsigned long rate;
|
|
struct clk *clk;
|
|
int ret, irq;
|
|
|
|
rtc = devm_kzalloc(dev, sizeof(*rtc), GFP_KERNEL);
|
|
if (!rtc)
|
|
return -ENOMEM;
|
|
|
|
rtc->type = (enum jz4740_rtc_type)device_get_match_data(dev);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
rtc->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(rtc->base))
|
|
return PTR_ERR(rtc->base);
|
|
|
|
clk = devm_clk_get_enabled(dev, "rtc");
|
|
if (IS_ERR(clk))
|
|
return dev_err_probe(dev, PTR_ERR(clk), "Failed to get RTC clock\n");
|
|
|
|
spin_lock_init(&rtc->lock);
|
|
|
|
platform_set_drvdata(pdev, rtc);
|
|
|
|
device_init_wakeup(dev, 1);
|
|
|
|
ret = dev_pm_set_wake_irq(dev, irq);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to set wake irq: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
rtc->rtc = devm_rtc_allocate_device(dev);
|
|
if (IS_ERR(rtc->rtc)) {
|
|
ret = PTR_ERR(rtc->rtc);
|
|
dev_err(dev, "Failed to allocate rtc device: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
rtc->rtc->ops = &jz4740_rtc_ops;
|
|
rtc->rtc->range_max = U32_MAX;
|
|
|
|
rate = clk_get_rate(clk);
|
|
jz4740_rtc_set_wakeup_params(rtc, np, rate);
|
|
|
|
/* Each 1 Hz pulse should happen after (rate) ticks */
|
|
jz4740_rtc_reg_write(rtc, JZ_REG_RTC_REGULATOR, rate - 1);
|
|
|
|
ret = devm_rtc_register_device(rtc->rtc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_request_irq(dev, irq, jz4740_rtc_irq, 0,
|
|
pdev->name, rtc);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to request rtc irq: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (of_device_is_system_power_controller(np)) {
|
|
dev_for_power_off = dev;
|
|
|
|
if (!pm_power_off)
|
|
pm_power_off = jz4740_rtc_power_off;
|
|
else
|
|
dev_warn(dev, "Poweroff handler already present!\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver jz4740_rtc_driver = {
|
|
.probe = jz4740_rtc_probe,
|
|
.driver = {
|
|
.name = "jz4740-rtc",
|
|
.of_match_table = jz4740_rtc_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(jz4740_rtc_driver);
|
|
|
|
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("RTC driver for the JZ4740 SoC\n");
|
|
MODULE_ALIAS("platform:jz4740-rtc");
|