mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-22 18:44:44 +08:00
dfc2e12df0
The get_rf_strength op in tuner-simple is valid only for the radio mode.
But due to the way get_signal in analog_demod_ops was designed it would
overwrite the signal value with a bogus value when in TV mode.
Pass a pointer to the signal value instead, and when not in radio mode
leave it alone in the tuner-simple.
This broke in commit 030755bde4
(tuner-core: call has_signal for both TV and radio) in kernel 3.6. Before
that this was working correctly. That commit did the right thing, but what
wasn't realized at the time was that tuner-simple should have been updated
as well to restrict setting the signal strength to the radio mode only.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
1159 lines
29 KiB
C
1159 lines
29 KiB
C
/*
|
|
* i2c tv tuner chip device driver
|
|
* controls all those simple 4-control-bytes style tuners.
|
|
*
|
|
* This "tuner-simple" module was split apart from the original "tuner" module.
|
|
*/
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/videodev2.h>
|
|
#include <media/tuner.h>
|
|
#include <media/v4l2-common.h>
|
|
#include <media/tuner-types.h>
|
|
#include "tuner-i2c.h"
|
|
#include "tuner-simple.h"
|
|
|
|
static int debug;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "enable verbose debug messages");
|
|
|
|
#define TUNER_SIMPLE_MAX 64
|
|
static unsigned int simple_devcount;
|
|
|
|
static int offset;
|
|
module_param(offset, int, 0664);
|
|
MODULE_PARM_DESC(offset, "Allows to specify an offset for tuner");
|
|
|
|
static unsigned int atv_input[TUNER_SIMPLE_MAX] = \
|
|
{ [0 ... (TUNER_SIMPLE_MAX-1)] = 0 };
|
|
static unsigned int dtv_input[TUNER_SIMPLE_MAX] = \
|
|
{ [0 ... (TUNER_SIMPLE_MAX-1)] = 0 };
|
|
module_param_array(atv_input, int, NULL, 0644);
|
|
module_param_array(dtv_input, int, NULL, 0644);
|
|
MODULE_PARM_DESC(atv_input, "specify atv rf input, 0 for autoselect");
|
|
MODULE_PARM_DESC(dtv_input, "specify dtv rf input, 0 for autoselect");
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
|
|
/* tv standard selection for Temic 4046 FM5
|
|
this value takes the low bits of control byte 2
|
|
from datasheet Rev.01, Feb.00
|
|
standard BG I L L2 D
|
|
picture IF 38.9 38.9 38.9 33.95 38.9
|
|
sound 1 33.4 32.9 32.4 40.45 32.4
|
|
sound 2 33.16
|
|
NICAM 33.05 32.348 33.05 33.05
|
|
*/
|
|
#define TEMIC_SET_PAL_I 0x05
|
|
#define TEMIC_SET_PAL_DK 0x09
|
|
#define TEMIC_SET_PAL_L 0x0a /* SECAM ? */
|
|
#define TEMIC_SET_PAL_L2 0x0b /* change IF ! */
|
|
#define TEMIC_SET_PAL_BG 0x0c
|
|
|
|
/* tv tuner system standard selection for Philips FQ1216ME
|
|
this value takes the low bits of control byte 2
|
|
from datasheet "1999 Nov 16" (supersedes "1999 Mar 23")
|
|
standard BG DK I L L`
|
|
picture carrier 38.90 38.90 38.90 38.90 33.95
|
|
colour 34.47 34.47 34.47 34.47 38.38
|
|
sound 1 33.40 32.40 32.90 32.40 40.45
|
|
sound 2 33.16 - - - -
|
|
NICAM 33.05 33.05 32.35 33.05 39.80
|
|
*/
|
|
#define PHILIPS_SET_PAL_I 0x01 /* Bit 2 always zero !*/
|
|
#define PHILIPS_SET_PAL_BGDK 0x09
|
|
#define PHILIPS_SET_PAL_L2 0x0a
|
|
#define PHILIPS_SET_PAL_L 0x0b
|
|
|
|
/* system switching for Philips FI1216MF MK2
|
|
from datasheet "1996 Jul 09",
|
|
standard BG L L'
|
|
picture carrier 38.90 38.90 33.95
|
|
colour 34.47 34.37 38.38
|
|
sound 1 33.40 32.40 40.45
|
|
sound 2 33.16 - -
|
|
NICAM 33.05 33.05 39.80
|
|
*/
|
|
#define PHILIPS_MF_SET_STD_BG 0x01 /* Bit 2 must be zero, Bit 3 is system output */
|
|
#define PHILIPS_MF_SET_STD_L 0x03 /* Used on Secam France */
|
|
#define PHILIPS_MF_SET_STD_LC 0x02 /* Used on SECAM L' */
|
|
|
|
/* Control byte */
|
|
|
|
#define TUNER_RATIO_MASK 0x06 /* Bit cb1:cb2 */
|
|
#define TUNER_RATIO_SELECT_50 0x00
|
|
#define TUNER_RATIO_SELECT_32 0x02
|
|
#define TUNER_RATIO_SELECT_166 0x04
|
|
#define TUNER_RATIO_SELECT_62 0x06
|
|
|
|
#define TUNER_CHARGE_PUMP 0x40 /* Bit cb6 */
|
|
|
|
/* Status byte */
|
|
|
|
#define TUNER_POR 0x80
|
|
#define TUNER_FL 0x40
|
|
#define TUNER_MODE 0x38
|
|
#define TUNER_AFC 0x07
|
|
#define TUNER_SIGNAL 0x07
|
|
#define TUNER_STEREO 0x10
|
|
|
|
#define TUNER_PLL_LOCKED 0x40
|
|
#define TUNER_STEREO_MK3 0x04
|
|
|
|
static DEFINE_MUTEX(tuner_simple_list_mutex);
|
|
static LIST_HEAD(hybrid_tuner_instance_list);
|
|
|
|
struct tuner_simple_priv {
|
|
unsigned int nr;
|
|
u16 last_div;
|
|
|
|
struct tuner_i2c_props i2c_props;
|
|
struct list_head hybrid_tuner_instance_list;
|
|
|
|
unsigned int type;
|
|
struct tunertype *tun;
|
|
|
|
u32 frequency;
|
|
u32 bandwidth;
|
|
bool radio_mode;
|
|
};
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
|
|
static int tuner_read_status(struct dvb_frontend *fe)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
unsigned char byte;
|
|
|
|
if (1 != tuner_i2c_xfer_recv(&priv->i2c_props, &byte, 1))
|
|
return 0;
|
|
|
|
return byte;
|
|
}
|
|
|
|
static inline int tuner_signal(const int status)
|
|
{
|
|
return (status & TUNER_SIGNAL) << 13;
|
|
}
|
|
|
|
static inline int tuner_stereo(const int type, const int status)
|
|
{
|
|
switch (type) {
|
|
case TUNER_PHILIPS_FM1216ME_MK3:
|
|
case TUNER_PHILIPS_FM1236_MK3:
|
|
case TUNER_PHILIPS_FM1256_IH3:
|
|
case TUNER_LG_NTSC_TAPE:
|
|
case TUNER_TCL_MF02GIP_5N:
|
|
return ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3);
|
|
case TUNER_PHILIPS_FM1216MK5:
|
|
return status | TUNER_STEREO;
|
|
default:
|
|
return status & TUNER_STEREO;
|
|
}
|
|
}
|
|
|
|
static inline int tuner_islocked(const int status)
|
|
{
|
|
return (status & TUNER_FL);
|
|
}
|
|
|
|
static inline int tuner_afcstatus(const int status)
|
|
{
|
|
return (status & TUNER_AFC) - 2;
|
|
}
|
|
|
|
|
|
static int simple_get_status(struct dvb_frontend *fe, u32 *status)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
int tuner_status;
|
|
|
|
if (priv->i2c_props.adap == NULL)
|
|
return -EINVAL;
|
|
|
|
tuner_status = tuner_read_status(fe);
|
|
|
|
*status = 0;
|
|
|
|
if (tuner_islocked(tuner_status))
|
|
*status = TUNER_STATUS_LOCKED;
|
|
if (tuner_stereo(priv->type, tuner_status))
|
|
*status |= TUNER_STATUS_STEREO;
|
|
|
|
tuner_dbg("AFC Status: %d\n", tuner_afcstatus(tuner_status));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int simple_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
int signal;
|
|
|
|
if (priv->i2c_props.adap == NULL || !priv->radio_mode)
|
|
return -EINVAL;
|
|
|
|
signal = tuner_signal(tuner_read_status(fe));
|
|
|
|
*strength = signal;
|
|
|
|
tuner_dbg("Signal strength: %d\n", signal);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
|
|
static inline char *tuner_param_name(enum param_type type)
|
|
{
|
|
char *name;
|
|
|
|
switch (type) {
|
|
case TUNER_PARAM_TYPE_RADIO:
|
|
name = "radio";
|
|
break;
|
|
case TUNER_PARAM_TYPE_PAL:
|
|
name = "pal";
|
|
break;
|
|
case TUNER_PARAM_TYPE_SECAM:
|
|
name = "secam";
|
|
break;
|
|
case TUNER_PARAM_TYPE_NTSC:
|
|
name = "ntsc";
|
|
break;
|
|
case TUNER_PARAM_TYPE_DIGITAL:
|
|
name = "digital";
|
|
break;
|
|
default:
|
|
name = "unknown";
|
|
break;
|
|
}
|
|
return name;
|
|
}
|
|
|
|
static struct tuner_params *simple_tuner_params(struct dvb_frontend *fe,
|
|
enum param_type desired_type)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
struct tunertype *tun = priv->tun;
|
|
int i;
|
|
|
|
for (i = 0; i < tun->count; i++)
|
|
if (desired_type == tun->params[i].type)
|
|
break;
|
|
|
|
/* use default tuner params if desired_type not available */
|
|
if (i == tun->count) {
|
|
tuner_dbg("desired params (%s) undefined for tuner %d\n",
|
|
tuner_param_name(desired_type), priv->type);
|
|
i = 0;
|
|
}
|
|
|
|
tuner_dbg("using tuner params #%d (%s)\n", i,
|
|
tuner_param_name(tun->params[i].type));
|
|
|
|
return &tun->params[i];
|
|
}
|
|
|
|
static int simple_config_lookup(struct dvb_frontend *fe,
|
|
struct tuner_params *t_params,
|
|
unsigned *frequency, u8 *config, u8 *cb)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
int i;
|
|
|
|
for (i = 0; i < t_params->count; i++) {
|
|
if (*frequency > t_params->ranges[i].limit)
|
|
continue;
|
|
break;
|
|
}
|
|
if (i == t_params->count) {
|
|
tuner_dbg("frequency out of range (%d > %d)\n",
|
|
*frequency, t_params->ranges[i - 1].limit);
|
|
*frequency = t_params->ranges[--i].limit;
|
|
}
|
|
*config = t_params->ranges[i].config;
|
|
*cb = t_params->ranges[i].cb;
|
|
|
|
tuner_dbg("freq = %d.%02d (%d), range = %d, "
|
|
"config = 0x%02x, cb = 0x%02x\n",
|
|
*frequency / 16, *frequency % 16 * 100 / 16, *frequency,
|
|
i, *config, *cb);
|
|
|
|
return i;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
|
|
static void simple_set_rf_input(struct dvb_frontend *fe,
|
|
u8 *config, u8 *cb, unsigned int rf)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
|
|
switch (priv->type) {
|
|
case TUNER_PHILIPS_TUV1236D:
|
|
switch (rf) {
|
|
case 1:
|
|
*cb |= 0x08;
|
|
break;
|
|
default:
|
|
*cb &= ~0x08;
|
|
break;
|
|
}
|
|
break;
|
|
case TUNER_PHILIPS_FCV1236D:
|
|
switch (rf) {
|
|
case 1:
|
|
*cb |= 0x01;
|
|
break;
|
|
default:
|
|
*cb &= ~0x01;
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int simple_std_setup(struct dvb_frontend *fe,
|
|
struct analog_parameters *params,
|
|
u8 *config, u8 *cb)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
int rc;
|
|
|
|
/* tv norm specific stuff for multi-norm tuners */
|
|
switch (priv->type) {
|
|
case TUNER_PHILIPS_SECAM: /* FI1216MF */
|
|
/* 0x01 -> ??? no change ??? */
|
|
/* 0x02 -> PAL BDGHI / SECAM L */
|
|
/* 0x04 -> ??? PAL others / SECAM others ??? */
|
|
*cb &= ~0x03;
|
|
if (params->std & V4L2_STD_SECAM_L)
|
|
/* also valid for V4L2_STD_SECAM */
|
|
*cb |= PHILIPS_MF_SET_STD_L;
|
|
else if (params->std & V4L2_STD_SECAM_LC)
|
|
*cb |= PHILIPS_MF_SET_STD_LC;
|
|
else /* V4L2_STD_B|V4L2_STD_GH */
|
|
*cb |= PHILIPS_MF_SET_STD_BG;
|
|
break;
|
|
|
|
case TUNER_TEMIC_4046FM5:
|
|
*cb &= ~0x0f;
|
|
|
|
if (params->std & V4L2_STD_PAL_BG) {
|
|
*cb |= TEMIC_SET_PAL_BG;
|
|
|
|
} else if (params->std & V4L2_STD_PAL_I) {
|
|
*cb |= TEMIC_SET_PAL_I;
|
|
|
|
} else if (params->std & V4L2_STD_PAL_DK) {
|
|
*cb |= TEMIC_SET_PAL_DK;
|
|
|
|
} else if (params->std & V4L2_STD_SECAM_L) {
|
|
*cb |= TEMIC_SET_PAL_L;
|
|
|
|
}
|
|
break;
|
|
|
|
case TUNER_PHILIPS_FQ1216ME:
|
|
*cb &= ~0x0f;
|
|
|
|
if (params->std & (V4L2_STD_PAL_BG|V4L2_STD_PAL_DK)) {
|
|
*cb |= PHILIPS_SET_PAL_BGDK;
|
|
|
|
} else if (params->std & V4L2_STD_PAL_I) {
|
|
*cb |= PHILIPS_SET_PAL_I;
|
|
|
|
} else if (params->std & V4L2_STD_SECAM_L) {
|
|
*cb |= PHILIPS_SET_PAL_L;
|
|
|
|
}
|
|
break;
|
|
|
|
case TUNER_PHILIPS_FCV1236D:
|
|
/* 0x00 -> ATSC antenna input 1 */
|
|
/* 0x01 -> ATSC antenna input 2 */
|
|
/* 0x02 -> NTSC antenna input 1 */
|
|
/* 0x03 -> NTSC antenna input 2 */
|
|
*cb &= ~0x03;
|
|
if (!(params->std & V4L2_STD_ATSC))
|
|
*cb |= 2;
|
|
break;
|
|
|
|
case TUNER_MICROTUNE_4042FI5:
|
|
/* Set the charge pump for fast tuning */
|
|
*config |= TUNER_CHARGE_PUMP;
|
|
break;
|
|
|
|
case TUNER_PHILIPS_TUV1236D:
|
|
{
|
|
struct tuner_i2c_props i2c = priv->i2c_props;
|
|
/* 0x40 -> ATSC antenna input 1 */
|
|
/* 0x48 -> ATSC antenna input 2 */
|
|
/* 0x00 -> NTSC antenna input 1 */
|
|
/* 0x08 -> NTSC antenna input 2 */
|
|
u8 buffer[4] = { 0x14, 0x00, 0x17, 0x00};
|
|
*cb &= ~0x40;
|
|
if (params->std & V4L2_STD_ATSC) {
|
|
*cb |= 0x40;
|
|
buffer[1] = 0x04;
|
|
}
|
|
/* set to the correct mode (analog or digital) */
|
|
i2c.addr = 0x0a;
|
|
rc = tuner_i2c_xfer_send(&i2c, &buffer[0], 2);
|
|
if (2 != rc)
|
|
tuner_warn("i2c i/o error: rc == %d "
|
|
"(should be 2)\n", rc);
|
|
rc = tuner_i2c_xfer_send(&i2c, &buffer[2], 2);
|
|
if (2 != rc)
|
|
tuner_warn("i2c i/o error: rc == %d "
|
|
"(should be 2)\n", rc);
|
|
break;
|
|
}
|
|
}
|
|
if (atv_input[priv->nr])
|
|
simple_set_rf_input(fe, config, cb, atv_input[priv->nr]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int simple_set_aux_byte(struct dvb_frontend *fe, u8 config, u8 aux)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
int rc;
|
|
u8 buffer[2];
|
|
|
|
buffer[0] = (config & ~0x38) | 0x18;
|
|
buffer[1] = aux;
|
|
|
|
tuner_dbg("setting aux byte: 0x%02x 0x%02x\n", buffer[0], buffer[1]);
|
|
|
|
rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 2);
|
|
if (2 != rc)
|
|
tuner_warn("i2c i/o error: rc == %d (should be 2)\n", rc);
|
|
|
|
return rc == 2 ? 0 : rc;
|
|
}
|
|
|
|
static int simple_post_tune(struct dvb_frontend *fe, u8 *buffer,
|
|
u16 div, u8 config, u8 cb)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
int rc;
|
|
|
|
switch (priv->type) {
|
|
case TUNER_LG_TDVS_H06XF:
|
|
simple_set_aux_byte(fe, config, 0x20);
|
|
break;
|
|
case TUNER_PHILIPS_FQ1216LME_MK3:
|
|
simple_set_aux_byte(fe, config, 0x60); /* External AGC */
|
|
break;
|
|
case TUNER_MICROTUNE_4042FI5:
|
|
{
|
|
/* FIXME - this may also work for other tuners */
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(1);
|
|
u8 status_byte = 0;
|
|
|
|
/* Wait until the PLL locks */
|
|
for (;;) {
|
|
if (time_after(jiffies, timeout))
|
|
return 0;
|
|
rc = tuner_i2c_xfer_recv(&priv->i2c_props,
|
|
&status_byte, 1);
|
|
if (1 != rc) {
|
|
tuner_warn("i2c i/o read error: rc == %d "
|
|
"(should be 1)\n", rc);
|
|
break;
|
|
}
|
|
if (status_byte & TUNER_PLL_LOCKED)
|
|
break;
|
|
udelay(10);
|
|
}
|
|
|
|
/* Set the charge pump for optimized phase noise figure */
|
|
config &= ~TUNER_CHARGE_PUMP;
|
|
buffer[0] = (div>>8) & 0x7f;
|
|
buffer[1] = div & 0xff;
|
|
buffer[2] = config;
|
|
buffer[3] = cb;
|
|
tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n",
|
|
buffer[0], buffer[1], buffer[2], buffer[3]);
|
|
|
|
rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4);
|
|
if (4 != rc)
|
|
tuner_warn("i2c i/o error: rc == %d "
|
|
"(should be 4)\n", rc);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
|
|
switch (priv->type) {
|
|
case TUNER_TENA_9533_DI:
|
|
case TUNER_YMEC_TVF_5533MF:
|
|
tuner_dbg("This tuner doesn't have FM. "
|
|
"Most cards have a TEA5767 for FM\n");
|
|
return 0;
|
|
case TUNER_PHILIPS_FM1216ME_MK3:
|
|
case TUNER_PHILIPS_FM1236_MK3:
|
|
case TUNER_PHILIPS_FMD1216ME_MK3:
|
|
case TUNER_PHILIPS_FMD1216MEX_MK3:
|
|
case TUNER_LG_NTSC_TAPE:
|
|
case TUNER_PHILIPS_FM1256_IH3:
|
|
case TUNER_TCL_MF02GIP_5N:
|
|
buffer[3] = 0x19;
|
|
break;
|
|
case TUNER_PHILIPS_FM1216MK5:
|
|
buffer[2] = 0x88;
|
|
buffer[3] = 0x09;
|
|
break;
|
|
case TUNER_TNF_5335MF:
|
|
buffer[3] = 0x11;
|
|
break;
|
|
case TUNER_LG_PAL_FM:
|
|
buffer[3] = 0xa5;
|
|
break;
|
|
case TUNER_THOMSON_DTT761X:
|
|
buffer[3] = 0x39;
|
|
break;
|
|
case TUNER_PHILIPS_FQ1216LME_MK3:
|
|
case TUNER_PHILIPS_FQ1236_MK5:
|
|
tuner_err("This tuner doesn't have FM\n");
|
|
/* Set the low band for sanity, since it covers 88-108 MHz */
|
|
buffer[3] = 0x01;
|
|
break;
|
|
case TUNER_MICROTUNE_4049FM5:
|
|
default:
|
|
buffer[3] = 0xa4;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
|
|
static int simple_set_tv_freq(struct dvb_frontend *fe,
|
|
struct analog_parameters *params)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
u8 config, cb;
|
|
u16 div;
|
|
u8 buffer[4];
|
|
int rc, IFPCoff, i;
|
|
enum param_type desired_type;
|
|
struct tuner_params *t_params;
|
|
|
|
/* IFPCoff = Video Intermediate Frequency - Vif:
|
|
940 =16*58.75 NTSC/J (Japan)
|
|
732 =16*45.75 M/N STD
|
|
704 =16*44 ATSC (at DVB code)
|
|
632 =16*39.50 I U.K.
|
|
622.4=16*38.90 B/G D/K I, L STD
|
|
592 =16*37.00 D China
|
|
590 =16.36.875 B Australia
|
|
543.2=16*33.95 L' STD
|
|
171.2=16*10.70 FM Radio (at set_radio_freq)
|
|
*/
|
|
|
|
if (params->std == V4L2_STD_NTSC_M_JP) {
|
|
IFPCoff = 940;
|
|
desired_type = TUNER_PARAM_TYPE_NTSC;
|
|
} else if ((params->std & V4L2_STD_MN) &&
|
|
!(params->std & ~V4L2_STD_MN)) {
|
|
IFPCoff = 732;
|
|
desired_type = TUNER_PARAM_TYPE_NTSC;
|
|
} else if (params->std == V4L2_STD_SECAM_LC) {
|
|
IFPCoff = 543;
|
|
desired_type = TUNER_PARAM_TYPE_SECAM;
|
|
} else {
|
|
IFPCoff = 623;
|
|
desired_type = TUNER_PARAM_TYPE_PAL;
|
|
}
|
|
|
|
t_params = simple_tuner_params(fe, desired_type);
|
|
|
|
i = simple_config_lookup(fe, t_params, ¶ms->frequency,
|
|
&config, &cb);
|
|
|
|
div = params->frequency + IFPCoff + offset;
|
|
|
|
tuner_dbg("Freq= %d.%02d MHz, V_IF=%d.%02d MHz, "
|
|
"Offset=%d.%02d MHz, div=%0d\n",
|
|
params->frequency / 16, params->frequency % 16 * 100 / 16,
|
|
IFPCoff / 16, IFPCoff % 16 * 100 / 16,
|
|
offset / 16, offset % 16 * 100 / 16, div);
|
|
|
|
/* tv norm specific stuff for multi-norm tuners */
|
|
simple_std_setup(fe, params, &config, &cb);
|
|
|
|
if (t_params->cb_first_if_lower_freq && div < priv->last_div) {
|
|
buffer[0] = config;
|
|
buffer[1] = cb;
|
|
buffer[2] = (div>>8) & 0x7f;
|
|
buffer[3] = div & 0xff;
|
|
} else {
|
|
buffer[0] = (div>>8) & 0x7f;
|
|
buffer[1] = div & 0xff;
|
|
buffer[2] = config;
|
|
buffer[3] = cb;
|
|
}
|
|
priv->last_div = div;
|
|
if (t_params->has_tda9887) {
|
|
struct v4l2_priv_tun_config tda9887_cfg;
|
|
int tda_config = 0;
|
|
int is_secam_l = (params->std & (V4L2_STD_SECAM_L |
|
|
V4L2_STD_SECAM_LC)) &&
|
|
!(params->std & ~(V4L2_STD_SECAM_L |
|
|
V4L2_STD_SECAM_LC));
|
|
|
|
tda9887_cfg.tuner = TUNER_TDA9887;
|
|
tda9887_cfg.priv = &tda_config;
|
|
|
|
if (params->std == V4L2_STD_SECAM_LC) {
|
|
if (t_params->port1_active ^ t_params->port1_invert_for_secam_lc)
|
|
tda_config |= TDA9887_PORT1_ACTIVE;
|
|
if (t_params->port2_active ^ t_params->port2_invert_for_secam_lc)
|
|
tda_config |= TDA9887_PORT2_ACTIVE;
|
|
} else {
|
|
if (t_params->port1_active)
|
|
tda_config |= TDA9887_PORT1_ACTIVE;
|
|
if (t_params->port2_active)
|
|
tda_config |= TDA9887_PORT2_ACTIVE;
|
|
}
|
|
if (t_params->intercarrier_mode)
|
|
tda_config |= TDA9887_INTERCARRIER;
|
|
if (is_secam_l) {
|
|
if (i == 0 && t_params->default_top_secam_low)
|
|
tda_config |= TDA9887_TOP(t_params->default_top_secam_low);
|
|
else if (i == 1 && t_params->default_top_secam_mid)
|
|
tda_config |= TDA9887_TOP(t_params->default_top_secam_mid);
|
|
else if (t_params->default_top_secam_high)
|
|
tda_config |= TDA9887_TOP(t_params->default_top_secam_high);
|
|
} else {
|
|
if (i == 0 && t_params->default_top_low)
|
|
tda_config |= TDA9887_TOP(t_params->default_top_low);
|
|
else if (i == 1 && t_params->default_top_mid)
|
|
tda_config |= TDA9887_TOP(t_params->default_top_mid);
|
|
else if (t_params->default_top_high)
|
|
tda_config |= TDA9887_TOP(t_params->default_top_high);
|
|
}
|
|
if (t_params->default_pll_gating_18)
|
|
tda_config |= TDA9887_GATING_18;
|
|
i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG,
|
|
&tda9887_cfg);
|
|
}
|
|
tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n",
|
|
buffer[0], buffer[1], buffer[2], buffer[3]);
|
|
|
|
rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4);
|
|
if (4 != rc)
|
|
tuner_warn("i2c i/o error: rc == %d (should be 4)\n", rc);
|
|
|
|
simple_post_tune(fe, &buffer[0], div, config, cb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int simple_set_radio_freq(struct dvb_frontend *fe,
|
|
struct analog_parameters *params)
|
|
{
|
|
struct tunertype *tun;
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
u8 buffer[4];
|
|
u16 div;
|
|
int rc, j;
|
|
struct tuner_params *t_params;
|
|
unsigned int freq = params->frequency;
|
|
|
|
tun = priv->tun;
|
|
|
|
for (j = tun->count-1; j > 0; j--)
|
|
if (tun->params[j].type == TUNER_PARAM_TYPE_RADIO)
|
|
break;
|
|
/* default t_params (j=0) will be used if desired type wasn't found */
|
|
t_params = &tun->params[j];
|
|
|
|
/* Select Radio 1st IF used */
|
|
switch (t_params->radio_if) {
|
|
case 0: /* 10.7 MHz */
|
|
freq += (unsigned int)(10.7*16000);
|
|
break;
|
|
case 1: /* 33.3 MHz */
|
|
freq += (unsigned int)(33.3*16000);
|
|
break;
|
|
case 2: /* 41.3 MHz */
|
|
freq += (unsigned int)(41.3*16000);
|
|
break;
|
|
default:
|
|
tuner_warn("Unsupported radio_if value %d\n",
|
|
t_params->radio_if);
|
|
return 0;
|
|
}
|
|
|
|
buffer[2] = (t_params->ranges[0].config & ~TUNER_RATIO_MASK) |
|
|
TUNER_RATIO_SELECT_50; /* 50 kHz step */
|
|
|
|
/* Bandswitch byte */
|
|
simple_radio_bandswitch(fe, &buffer[0]);
|
|
|
|
/* Convert from 1/16 kHz V4L steps to 1/20 MHz (=50 kHz) PLL steps
|
|
freq * (1 Mhz / 16000 V4L steps) * (20 PLL steps / 1 MHz) =
|
|
freq * (1/800) */
|
|
div = (freq + 400) / 800;
|
|
|
|
if (t_params->cb_first_if_lower_freq && div < priv->last_div) {
|
|
buffer[0] = buffer[2];
|
|
buffer[1] = buffer[3];
|
|
buffer[2] = (div>>8) & 0x7f;
|
|
buffer[3] = div & 0xff;
|
|
} else {
|
|
buffer[0] = (div>>8) & 0x7f;
|
|
buffer[1] = div & 0xff;
|
|
}
|
|
|
|
tuner_dbg("radio 0x%02x 0x%02x 0x%02x 0x%02x\n",
|
|
buffer[0], buffer[1], buffer[2], buffer[3]);
|
|
priv->last_div = div;
|
|
|
|
if (t_params->has_tda9887) {
|
|
int config = 0;
|
|
struct v4l2_priv_tun_config tda9887_cfg;
|
|
|
|
tda9887_cfg.tuner = TUNER_TDA9887;
|
|
tda9887_cfg.priv = &config;
|
|
|
|
if (t_params->port1_active &&
|
|
!t_params->port1_fm_high_sensitivity)
|
|
config |= TDA9887_PORT1_ACTIVE;
|
|
if (t_params->port2_active &&
|
|
!t_params->port2_fm_high_sensitivity)
|
|
config |= TDA9887_PORT2_ACTIVE;
|
|
if (t_params->intercarrier_mode)
|
|
config |= TDA9887_INTERCARRIER;
|
|
/* if (t_params->port1_set_for_fm_mono)
|
|
config &= ~TDA9887_PORT1_ACTIVE;*/
|
|
if (t_params->fm_gain_normal)
|
|
config |= TDA9887_GAIN_NORMAL;
|
|
if (t_params->radio_if == 2)
|
|
config |= TDA9887_RIF_41_3;
|
|
i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG,
|
|
&tda9887_cfg);
|
|
}
|
|
rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4);
|
|
if (4 != rc)
|
|
tuner_warn("i2c i/o error: rc == %d (should be 4)\n", rc);
|
|
|
|
/* Write AUX byte */
|
|
switch (priv->type) {
|
|
case TUNER_PHILIPS_FM1216ME_MK3:
|
|
buffer[2] = 0x98;
|
|
buffer[3] = 0x20; /* set TOP AGC */
|
|
rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4);
|
|
if (4 != rc)
|
|
tuner_warn("i2c i/o error: rc == %d (should be 4)\n", rc);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int simple_set_params(struct dvb_frontend *fe,
|
|
struct analog_parameters *params)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
int ret = -EINVAL;
|
|
|
|
if (priv->i2c_props.adap == NULL)
|
|
return -EINVAL;
|
|
|
|
switch (params->mode) {
|
|
case V4L2_TUNER_RADIO:
|
|
priv->radio_mode = true;
|
|
ret = simple_set_radio_freq(fe, params);
|
|
priv->frequency = params->frequency * 125 / 2;
|
|
break;
|
|
case V4L2_TUNER_ANALOG_TV:
|
|
case V4L2_TUNER_DIGITAL_TV:
|
|
priv->radio_mode = false;
|
|
ret = simple_set_tv_freq(fe, params);
|
|
priv->frequency = params->frequency * 62500;
|
|
break;
|
|
}
|
|
priv->bandwidth = 0;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void simple_set_dvb(struct dvb_frontend *fe, u8 *buf,
|
|
const u32 delsys,
|
|
const u32 frequency,
|
|
const u32 bandwidth)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
|
|
switch (priv->type) {
|
|
case TUNER_PHILIPS_FMD1216ME_MK3:
|
|
case TUNER_PHILIPS_FMD1216MEX_MK3:
|
|
if (bandwidth == 8000000 &&
|
|
frequency >= 158870000)
|
|
buf[3] |= 0x08;
|
|
break;
|
|
case TUNER_PHILIPS_TD1316:
|
|
/* determine band */
|
|
buf[3] |= (frequency < 161000000) ? 1 :
|
|
(frequency < 444000000) ? 2 : 4;
|
|
|
|
/* setup PLL filter */
|
|
if (bandwidth == 8000000)
|
|
buf[3] |= 1 << 3;
|
|
break;
|
|
case TUNER_PHILIPS_TUV1236D:
|
|
case TUNER_PHILIPS_FCV1236D:
|
|
{
|
|
unsigned int new_rf;
|
|
|
|
if (dtv_input[priv->nr])
|
|
new_rf = dtv_input[priv->nr];
|
|
else
|
|
switch (delsys) {
|
|
case SYS_DVBC_ANNEX_B:
|
|
new_rf = 1;
|
|
break;
|
|
case SYS_ATSC:
|
|
default:
|
|
new_rf = 0;
|
|
break;
|
|
}
|
|
simple_set_rf_input(fe, &buf[2], &buf[3], new_rf);
|
|
break;
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static u32 simple_dvb_configure(struct dvb_frontend *fe, u8 *buf,
|
|
const u32 delsys,
|
|
const u32 freq,
|
|
const u32 bw)
|
|
{
|
|
/* This function returns the tuned frequency on success, 0 on error */
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
struct tunertype *tun = priv->tun;
|
|
static struct tuner_params *t_params;
|
|
u8 config, cb;
|
|
u32 div;
|
|
int ret;
|
|
u32 frequency = freq / 62500;
|
|
|
|
if (!tun->stepsize) {
|
|
/* tuner-core was loaded before the digital tuner was
|
|
* configured and somehow picked the wrong tuner type */
|
|
tuner_err("attempt to treat tuner %d (%s) as digital tuner "
|
|
"without stepsize defined.\n",
|
|
priv->type, priv->tun->name);
|
|
return 0; /* failure */
|
|
}
|
|
|
|
t_params = simple_tuner_params(fe, TUNER_PARAM_TYPE_DIGITAL);
|
|
ret = simple_config_lookup(fe, t_params, &frequency, &config, &cb);
|
|
if (ret < 0)
|
|
return 0; /* failure */
|
|
|
|
div = ((frequency + t_params->iffreq) * 62500 + offset +
|
|
tun->stepsize/2) / tun->stepsize;
|
|
|
|
buf[0] = div >> 8;
|
|
buf[1] = div & 0xff;
|
|
buf[2] = config;
|
|
buf[3] = cb;
|
|
|
|
simple_set_dvb(fe, buf, delsys, freq, bw);
|
|
|
|
tuner_dbg("%s: div=%d | buf=0x%02x,0x%02x,0x%02x,0x%02x\n",
|
|
tun->name, div, buf[0], buf[1], buf[2], buf[3]);
|
|
|
|
/* calculate the frequency we set it to */
|
|
return (div * tun->stepsize) - t_params->iffreq;
|
|
}
|
|
|
|
static int simple_dvb_calc_regs(struct dvb_frontend *fe,
|
|
u8 *buf, int buf_len)
|
|
{
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
u32 delsys = c->delivery_system;
|
|
u32 bw = c->bandwidth_hz;
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
u32 frequency;
|
|
|
|
if (buf_len < 5)
|
|
return -EINVAL;
|
|
|
|
frequency = simple_dvb_configure(fe, buf+1, delsys, c->frequency, bw);
|
|
if (frequency == 0)
|
|
return -EINVAL;
|
|
|
|
buf[0] = priv->i2c_props.addr;
|
|
|
|
priv->frequency = frequency;
|
|
priv->bandwidth = c->bandwidth_hz;
|
|
|
|
return 5;
|
|
}
|
|
|
|
static int simple_dvb_set_params(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
u32 delsys = c->delivery_system;
|
|
u32 bw = c->bandwidth_hz;
|
|
u32 freq = c->frequency;
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
u32 frequency;
|
|
u32 prev_freq, prev_bw;
|
|
int ret;
|
|
u8 buf[5];
|
|
|
|
if (priv->i2c_props.adap == NULL)
|
|
return -EINVAL;
|
|
|
|
prev_freq = priv->frequency;
|
|
prev_bw = priv->bandwidth;
|
|
|
|
frequency = simple_dvb_configure(fe, buf+1, delsys, freq, bw);
|
|
if (frequency == 0)
|
|
return -EINVAL;
|
|
|
|
buf[0] = priv->i2c_props.addr;
|
|
|
|
priv->frequency = frequency;
|
|
priv->bandwidth = bw;
|
|
|
|
/* put analog demod in standby when tuning digital */
|
|
if (fe->ops.analog_ops.standby)
|
|
fe->ops.analog_ops.standby(fe);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
/* buf[0] contains the i2c address, but *
|
|
* we already have it in i2c_props.addr */
|
|
ret = tuner_i2c_xfer_send(&priv->i2c_props, buf+1, 4);
|
|
if (ret != 4)
|
|
goto fail;
|
|
|
|
return 0;
|
|
fail:
|
|
/* calc_regs sets frequency and bandwidth. if we failed, unset them */
|
|
priv->frequency = prev_freq;
|
|
priv->bandwidth = prev_bw;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int simple_init(struct dvb_frontend *fe)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
|
|
if (priv->i2c_props.adap == NULL)
|
|
return -EINVAL;
|
|
|
|
if (priv->tun->initdata) {
|
|
int ret;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
ret = tuner_i2c_xfer_send(&priv->i2c_props,
|
|
priv->tun->initdata + 1,
|
|
priv->tun->initdata[0]);
|
|
if (ret != priv->tun->initdata[0])
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int simple_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
|
|
if (priv->i2c_props.adap == NULL)
|
|
return -EINVAL;
|
|
|
|
if (priv->tun->sleepdata) {
|
|
int ret;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
ret = tuner_i2c_xfer_send(&priv->i2c_props,
|
|
priv->tun->sleepdata + 1,
|
|
priv->tun->sleepdata[0]);
|
|
if (ret != priv->tun->sleepdata[0])
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int simple_release(struct dvb_frontend *fe)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
|
|
mutex_lock(&tuner_simple_list_mutex);
|
|
|
|
if (priv)
|
|
hybrid_tuner_release_state(priv);
|
|
|
|
mutex_unlock(&tuner_simple_list_mutex);
|
|
|
|
fe->tuner_priv = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int simple_get_frequency(struct dvb_frontend *fe, u32 *frequency)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
*frequency = priv->frequency;
|
|
return 0;
|
|
}
|
|
|
|
static int simple_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
*bandwidth = priv->bandwidth;
|
|
return 0;
|
|
}
|
|
|
|
static struct dvb_tuner_ops simple_tuner_ops = {
|
|
.init = simple_init,
|
|
.sleep = simple_sleep,
|
|
.set_analog_params = simple_set_params,
|
|
.set_params = simple_dvb_set_params,
|
|
.calc_regs = simple_dvb_calc_regs,
|
|
.release = simple_release,
|
|
.get_frequency = simple_get_frequency,
|
|
.get_bandwidth = simple_get_bandwidth,
|
|
.get_status = simple_get_status,
|
|
.get_rf_strength = simple_get_rf_strength,
|
|
};
|
|
|
|
struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe,
|
|
struct i2c_adapter *i2c_adap,
|
|
u8 i2c_addr,
|
|
unsigned int type)
|
|
{
|
|
struct tuner_simple_priv *priv = NULL;
|
|
int instance;
|
|
|
|
if (type >= tuner_count) {
|
|
printk(KERN_WARNING "%s: invalid tuner type: %d (max: %d)\n",
|
|
__func__, type, tuner_count-1);
|
|
return NULL;
|
|
}
|
|
|
|
/* If i2c_adap is set, check that the tuner is at the correct address.
|
|
* Otherwise, if i2c_adap is NULL, the tuner will be programmed directly
|
|
* by the digital demod via calc_regs.
|
|
*/
|
|
if (i2c_adap != NULL) {
|
|
u8 b[1];
|
|
struct i2c_msg msg = {
|
|
.addr = i2c_addr, .flags = I2C_M_RD,
|
|
.buf = b, .len = 1,
|
|
};
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
if (1 != i2c_transfer(i2c_adap, &msg, 1))
|
|
printk(KERN_WARNING "tuner-simple %d-%04x: "
|
|
"unable to probe %s, proceeding anyway.",
|
|
i2c_adapter_id(i2c_adap), i2c_addr,
|
|
tuners[type].name);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
}
|
|
|
|
mutex_lock(&tuner_simple_list_mutex);
|
|
|
|
instance = hybrid_tuner_request_state(struct tuner_simple_priv, priv,
|
|
hybrid_tuner_instance_list,
|
|
i2c_adap, i2c_addr,
|
|
"tuner-simple");
|
|
switch (instance) {
|
|
case 0:
|
|
mutex_unlock(&tuner_simple_list_mutex);
|
|
return NULL;
|
|
case 1:
|
|
fe->tuner_priv = priv;
|
|
|
|
priv->type = type;
|
|
priv->tun = &tuners[type];
|
|
priv->nr = simple_devcount++;
|
|
break;
|
|
default:
|
|
fe->tuner_priv = priv;
|
|
break;
|
|
}
|
|
|
|
mutex_unlock(&tuner_simple_list_mutex);
|
|
|
|
memcpy(&fe->ops.tuner_ops, &simple_tuner_ops,
|
|
sizeof(struct dvb_tuner_ops));
|
|
|
|
if (type != priv->type)
|
|
tuner_warn("couldn't set type to %d. Using %d (%s) instead\n",
|
|
type, priv->type, priv->tun->name);
|
|
else
|
|
tuner_info("type set to %d (%s)\n",
|
|
priv->type, priv->tun->name);
|
|
|
|
if ((debug) || ((atv_input[priv->nr] > 0) ||
|
|
(dtv_input[priv->nr] > 0))) {
|
|
if (0 == atv_input[priv->nr])
|
|
tuner_info("tuner %d atv rf input will be "
|
|
"autoselected\n", priv->nr);
|
|
else
|
|
tuner_info("tuner %d atv rf input will be "
|
|
"set to input %d (insmod option)\n",
|
|
priv->nr, atv_input[priv->nr]);
|
|
if (0 == dtv_input[priv->nr])
|
|
tuner_info("tuner %d dtv rf input will be "
|
|
"autoselected\n", priv->nr);
|
|
else
|
|
tuner_info("tuner %d dtv rf input will be "
|
|
"set to input %d (insmod option)\n",
|
|
priv->nr, dtv_input[priv->nr]);
|
|
}
|
|
|
|
strlcpy(fe->ops.tuner_ops.info.name, priv->tun->name,
|
|
sizeof(fe->ops.tuner_ops.info.name));
|
|
|
|
return fe;
|
|
}
|
|
EXPORT_SYMBOL_GPL(simple_tuner_attach);
|
|
|
|
MODULE_DESCRIPTION("Simple 4-control-bytes style tuner driver");
|
|
MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/*
|
|
* Overrides for Emacs so that we follow Linus's tabbing style.
|
|
* ---------------------------------------------------------------------------
|
|
* Local variables:
|
|
* c-basic-offset: 8
|
|
* End:
|
|
*/
|