mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-22 10:34:55 +08:00
1cda12b15d
Added optional property support reset-gpios for the dwc3-Xilinx glue driver. Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220504075309.6244-2-piyush.mehta@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
136 lines
3.2 KiB
YAML
136 lines
3.2 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/usb/dwc3-xilinx.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Xilinx SuperSpeed DWC3 USB SoC controller
|
|
|
|
maintainers:
|
|
- Manish Narani <manish.narani@xilinx.com>
|
|
|
|
properties:
|
|
compatible:
|
|
items:
|
|
- enum:
|
|
- xlnx,zynqmp-dwc3
|
|
- xlnx,versal-dwc3
|
|
reg:
|
|
maxItems: 1
|
|
|
|
"#address-cells":
|
|
enum: [ 1, 2 ]
|
|
|
|
"#size-cells":
|
|
enum: [ 1, 2 ]
|
|
|
|
ranges: true
|
|
|
|
power-domains:
|
|
description: specifies a phandle to PM domain provider node
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
description:
|
|
A list of phandle and clock-specifier pairs for the clocks
|
|
listed in clock-names.
|
|
items:
|
|
- description: Master/Core clock, has to be >= 125 MHz
|
|
for SS operation and >= 60MHz for HS operation.
|
|
- description: Clock source to core during PHY power down.
|
|
|
|
clock-names:
|
|
items:
|
|
- const: bus_clk
|
|
- const: ref_clk
|
|
|
|
resets:
|
|
description:
|
|
A list of phandles for resets listed in reset-names.
|
|
|
|
items:
|
|
- description: USB core reset
|
|
- description: USB hibernation reset
|
|
- description: USB APB reset
|
|
|
|
reset-names:
|
|
items:
|
|
- const: usb_crst
|
|
- const: usb_hibrst
|
|
- const: usb_apbrst
|
|
|
|
phys:
|
|
minItems: 1
|
|
maxItems: 2
|
|
|
|
phy-names:
|
|
minItems: 1
|
|
maxItems: 2
|
|
items:
|
|
enum:
|
|
- usb2-phy
|
|
- usb3-phy
|
|
|
|
reset-gpios:
|
|
description: GPIO used for the reset ulpi-phy
|
|
maxItems: 1
|
|
|
|
# Required child node:
|
|
|
|
patternProperties:
|
|
"^usb@[0-9a-f]+$":
|
|
$ref: snps,dwc3.yaml#
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- "#address-cells"
|
|
- "#size-cells"
|
|
- ranges
|
|
- power-domains
|
|
- clocks
|
|
- clock-names
|
|
- resets
|
|
- reset-names
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
|
|
#include <dt-bindings/power/xlnx-zynqmp-power.h>
|
|
#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
|
|
#include <dt-bindings/clock/xlnx-zynqmp-clk.h>
|
|
#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
|
|
#include <dt-bindings/phy/phy.h>
|
|
axi {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
usb@0 {
|
|
#address-cells = <0x2>;
|
|
#size-cells = <0x2>;
|
|
compatible = "xlnx,zynqmp-dwc3";
|
|
reg = <0x0 0xff9d0000 0x0 0x100>;
|
|
clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
|
|
clock-names = "bus_clk", "ref_clk";
|
|
power-domains = <&zynqmp_firmware PD_USB_0>;
|
|
resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
|
|
<&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
|
|
<&zynqmp_reset ZYNQMP_RESET_USB1_APB>;
|
|
reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
|
|
phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
|
|
phy-names = "usb3-phy";
|
|
ranges;
|
|
|
|
usb@fe200000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x0 0xfe200000 0x0 0x40000>;
|
|
interrupt-names = "host", "otg";
|
|
interrupts = <0 65 4>, <0 69 4>;
|
|
dr_mode = "host";
|
|
dma-coherent;
|
|
};
|
|
};
|
|
};
|