mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 18:14:07 +08:00
5f3e2bf008
Some TCP peers announce a very small MSS option in their SYN and/or
SYN/ACK messages.
This forces the stack to send packets with a very high network/cpu
overhead.
Linux has enforced a minimal value of 48. Since this value includes
the size of TCP options, and that the options can consume up to 40
bytes, this means that each segment can include only 8 bytes of payload.
In some cases, it can be useful to increase the minimal value
to a saner value.
We still let the default to 48 (TCP_MIN_SND_MSS), for compatibility
reasons.
Note that TCP_MAXSEG socket option enforces a minimal value
of (TCP_MIN_MSS). David Miller increased this minimal value
in commit c39508d6f1
("tcp: Make TCP_MAXSEG minimum more correct.")
from 64 to 88.
We might in the future merge TCP_MIN_SND_MSS and TCP_MIN_MSS.
CVE-2019-11479 -- tcp mss hardcoded to 48
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Jonathan Looney <jtl@netflix.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Bruce Curtis <brucec@netflix.com>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2265 lines
81 KiB
Plaintext
2265 lines
81 KiB
Plaintext
/proc/sys/net/ipv4/* Variables:
|
|
|
|
ip_forward - BOOLEAN
|
|
0 - disabled (default)
|
|
not 0 - enabled
|
|
|
|
Forward Packets between interfaces.
|
|
|
|
This variable is special, its change resets all configuration
|
|
parameters to their default state (RFC1122 for hosts, RFC1812
|
|
for routers)
|
|
|
|
ip_default_ttl - INTEGER
|
|
Default value of TTL field (Time To Live) for outgoing (but not
|
|
forwarded) IP packets. Should be between 1 and 255 inclusive.
|
|
Default: 64 (as recommended by RFC1700)
|
|
|
|
ip_no_pmtu_disc - INTEGER
|
|
Disable Path MTU Discovery. If enabled in mode 1 and a
|
|
fragmentation-required ICMP is received, the PMTU to this
|
|
destination will be set to min_pmtu (see below). You will need
|
|
to raise min_pmtu to the smallest interface MTU on your system
|
|
manually if you want to avoid locally generated fragments.
|
|
|
|
In mode 2 incoming Path MTU Discovery messages will be
|
|
discarded. Outgoing frames are handled the same as in mode 1,
|
|
implicitly setting IP_PMTUDISC_DONT on every created socket.
|
|
|
|
Mode 3 is a hardened pmtu discover mode. The kernel will only
|
|
accept fragmentation-needed errors if the underlying protocol
|
|
can verify them besides a plain socket lookup. Current
|
|
protocols for which pmtu events will be honored are TCP, SCTP
|
|
and DCCP as they verify e.g. the sequence number or the
|
|
association. This mode should not be enabled globally but is
|
|
only intended to secure e.g. name servers in namespaces where
|
|
TCP path mtu must still work but path MTU information of other
|
|
protocols should be discarded. If enabled globally this mode
|
|
could break other protocols.
|
|
|
|
Possible values: 0-3
|
|
Default: FALSE
|
|
|
|
min_pmtu - INTEGER
|
|
default 552 - minimum discovered Path MTU
|
|
|
|
ip_forward_use_pmtu - BOOLEAN
|
|
By default we don't trust protocol path MTUs while forwarding
|
|
because they could be easily forged and can lead to unwanted
|
|
fragmentation by the router.
|
|
You only need to enable this if you have user-space software
|
|
which tries to discover path mtus by itself and depends on the
|
|
kernel honoring this information. This is normally not the
|
|
case.
|
|
Default: 0 (disabled)
|
|
Possible values:
|
|
0 - disabled
|
|
1 - enabled
|
|
|
|
fwmark_reflect - BOOLEAN
|
|
Controls the fwmark of kernel-generated IPv4 reply packets that are not
|
|
associated with a socket for example, TCP RSTs or ICMP echo replies).
|
|
If unset, these packets have a fwmark of zero. If set, they have the
|
|
fwmark of the packet they are replying to.
|
|
Default: 0
|
|
|
|
fib_multipath_use_neigh - BOOLEAN
|
|
Use status of existing neighbor entry when determining nexthop for
|
|
multipath routes. If disabled, neighbor information is not used and
|
|
packets could be directed to a failed nexthop. Only valid for kernels
|
|
built with CONFIG_IP_ROUTE_MULTIPATH enabled.
|
|
Default: 0 (disabled)
|
|
Possible values:
|
|
0 - disabled
|
|
1 - enabled
|
|
|
|
fib_multipath_hash_policy - INTEGER
|
|
Controls which hash policy to use for multipath routes. Only valid
|
|
for kernels built with CONFIG_IP_ROUTE_MULTIPATH enabled.
|
|
Default: 0 (Layer 3)
|
|
Possible values:
|
|
0 - Layer 3
|
|
1 - Layer 4
|
|
|
|
fib_sync_mem - UNSIGNED INTEGER
|
|
Amount of dirty memory from fib entries that can be backlogged before
|
|
synchronize_rcu is forced.
|
|
Default: 512kB Minimum: 64kB Maximum: 64MB
|
|
|
|
ip_forward_update_priority - INTEGER
|
|
Whether to update SKB priority from "TOS" field in IPv4 header after it
|
|
is forwarded. The new SKB priority is mapped from TOS field value
|
|
according to an rt_tos2priority table (see e.g. man tc-prio).
|
|
Default: 1 (Update priority.)
|
|
Possible values:
|
|
0 - Do not update priority.
|
|
1 - Update priority.
|
|
|
|
route/max_size - INTEGER
|
|
Maximum number of routes allowed in the kernel. Increase
|
|
this when using large numbers of interfaces and/or routes.
|
|
From linux kernel 3.6 onwards, this is deprecated for ipv4
|
|
as route cache is no longer used.
|
|
|
|
neigh/default/gc_thresh1 - INTEGER
|
|
Minimum number of entries to keep. Garbage collector will not
|
|
purge entries if there are fewer than this number.
|
|
Default: 128
|
|
|
|
neigh/default/gc_thresh2 - INTEGER
|
|
Threshold when garbage collector becomes more aggressive about
|
|
purging entries. Entries older than 5 seconds will be cleared
|
|
when over this number.
|
|
Default: 512
|
|
|
|
neigh/default/gc_thresh3 - INTEGER
|
|
Maximum number of non-PERMANENT neighbor entries allowed. Increase
|
|
this when using large numbers of interfaces and when communicating
|
|
with large numbers of directly-connected peers.
|
|
Default: 1024
|
|
|
|
neigh/default/unres_qlen_bytes - INTEGER
|
|
The maximum number of bytes which may be used by packets
|
|
queued for each unresolved address by other network layers.
|
|
(added in linux 3.3)
|
|
Setting negative value is meaningless and will return error.
|
|
Default: SK_WMEM_MAX, (same as net.core.wmem_default).
|
|
Exact value depends on architecture and kernel options,
|
|
but should be enough to allow queuing 256 packets
|
|
of medium size.
|
|
|
|
neigh/default/unres_qlen - INTEGER
|
|
The maximum number of packets which may be queued for each
|
|
unresolved address by other network layers.
|
|
(deprecated in linux 3.3) : use unres_qlen_bytes instead.
|
|
Prior to linux 3.3, the default value is 3 which may cause
|
|
unexpected packet loss. The current default value is calculated
|
|
according to default value of unres_qlen_bytes and true size of
|
|
packet.
|
|
Default: 101
|
|
|
|
mtu_expires - INTEGER
|
|
Time, in seconds, that cached PMTU information is kept.
|
|
|
|
min_adv_mss - INTEGER
|
|
The advertised MSS depends on the first hop route MTU, but will
|
|
never be lower than this setting.
|
|
|
|
IP Fragmentation:
|
|
|
|
ipfrag_high_thresh - LONG INTEGER
|
|
Maximum memory used to reassemble IP fragments.
|
|
|
|
ipfrag_low_thresh - LONG INTEGER
|
|
(Obsolete since linux-4.17)
|
|
Maximum memory used to reassemble IP fragments before the kernel
|
|
begins to remove incomplete fragment queues to free up resources.
|
|
The kernel still accepts new fragments for defragmentation.
|
|
|
|
ipfrag_time - INTEGER
|
|
Time in seconds to keep an IP fragment in memory.
|
|
|
|
ipfrag_max_dist - INTEGER
|
|
ipfrag_max_dist is a non-negative integer value which defines the
|
|
maximum "disorder" which is allowed among fragments which share a
|
|
common IP source address. Note that reordering of packets is
|
|
not unusual, but if a large number of fragments arrive from a source
|
|
IP address while a particular fragment queue remains incomplete, it
|
|
probably indicates that one or more fragments belonging to that queue
|
|
have been lost. When ipfrag_max_dist is positive, an additional check
|
|
is done on fragments before they are added to a reassembly queue - if
|
|
ipfrag_max_dist (or more) fragments have arrived from a particular IP
|
|
address between additions to any IP fragment queue using that source
|
|
address, it's presumed that one or more fragments in the queue are
|
|
lost. The existing fragment queue will be dropped, and a new one
|
|
started. An ipfrag_max_dist value of zero disables this check.
|
|
|
|
Using a very small value, e.g. 1 or 2, for ipfrag_max_dist can
|
|
result in unnecessarily dropping fragment queues when normal
|
|
reordering of packets occurs, which could lead to poor application
|
|
performance. Using a very large value, e.g. 50000, increases the
|
|
likelihood of incorrectly reassembling IP fragments that originate
|
|
from different IP datagrams, which could result in data corruption.
|
|
Default: 64
|
|
|
|
INET peer storage:
|
|
|
|
inet_peer_threshold - INTEGER
|
|
The approximate size of the storage. Starting from this threshold
|
|
entries will be thrown aggressively. This threshold also determines
|
|
entries' time-to-live and time intervals between garbage collection
|
|
passes. More entries, less time-to-live, less GC interval.
|
|
|
|
inet_peer_minttl - INTEGER
|
|
Minimum time-to-live of entries. Should be enough to cover fragment
|
|
time-to-live on the reassembling side. This minimum time-to-live is
|
|
guaranteed if the pool size is less than inet_peer_threshold.
|
|
Measured in seconds.
|
|
|
|
inet_peer_maxttl - INTEGER
|
|
Maximum time-to-live of entries. Unused entries will expire after
|
|
this period of time if there is no memory pressure on the pool (i.e.
|
|
when the number of entries in the pool is very small).
|
|
Measured in seconds.
|
|
|
|
TCP variables:
|
|
|
|
somaxconn - INTEGER
|
|
Limit of socket listen() backlog, known in userspace as SOMAXCONN.
|
|
Defaults to 128. See also tcp_max_syn_backlog for additional tuning
|
|
for TCP sockets.
|
|
|
|
tcp_abort_on_overflow - BOOLEAN
|
|
If listening service is too slow to accept new connections,
|
|
reset them. Default state is FALSE. It means that if overflow
|
|
occurred due to a burst, connection will recover. Enable this
|
|
option _only_ if you are really sure that listening daemon
|
|
cannot be tuned to accept connections faster. Enabling this
|
|
option can harm clients of your server.
|
|
|
|
tcp_adv_win_scale - INTEGER
|
|
Count buffering overhead as bytes/2^tcp_adv_win_scale
|
|
(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
|
|
if it is <= 0.
|
|
Possible values are [-31, 31], inclusive.
|
|
Default: 1
|
|
|
|
tcp_allowed_congestion_control - STRING
|
|
Show/set the congestion control choices available to non-privileged
|
|
processes. The list is a subset of those listed in
|
|
tcp_available_congestion_control.
|
|
Default is "reno" and the default setting (tcp_congestion_control).
|
|
|
|
tcp_app_win - INTEGER
|
|
Reserve max(window/2^tcp_app_win, mss) of window for application
|
|
buffer. Value 0 is special, it means that nothing is reserved.
|
|
Default: 31
|
|
|
|
tcp_autocorking - BOOLEAN
|
|
Enable TCP auto corking :
|
|
When applications do consecutive small write()/sendmsg() system calls,
|
|
we try to coalesce these small writes as much as possible, to lower
|
|
total amount of sent packets. This is done if at least one prior
|
|
packet for the flow is waiting in Qdisc queues or device transmit
|
|
queue. Applications can still use TCP_CORK for optimal behavior
|
|
when they know how/when to uncork their sockets.
|
|
Default : 1
|
|
|
|
tcp_available_congestion_control - STRING
|
|
Shows the available congestion control choices that are registered.
|
|
More congestion control algorithms may be available as modules,
|
|
but not loaded.
|
|
|
|
tcp_base_mss - INTEGER
|
|
The initial value of search_low to be used by the packetization layer
|
|
Path MTU discovery (MTU probing). If MTU probing is enabled,
|
|
this is the initial MSS used by the connection.
|
|
|
|
tcp_min_snd_mss - INTEGER
|
|
TCP SYN and SYNACK messages usually advertise an ADVMSS option,
|
|
as described in RFC 1122 and RFC 6691.
|
|
If this ADVMSS option is smaller than tcp_min_snd_mss,
|
|
it is silently capped to tcp_min_snd_mss.
|
|
|
|
Default : 48 (at least 8 bytes of payload per segment)
|
|
|
|
tcp_congestion_control - STRING
|
|
Set the congestion control algorithm to be used for new
|
|
connections. The algorithm "reno" is always available, but
|
|
additional choices may be available based on kernel configuration.
|
|
Default is set as part of kernel configuration.
|
|
For passive connections, the listener congestion control choice
|
|
is inherited.
|
|
[see setsockopt(listenfd, SOL_TCP, TCP_CONGESTION, "name" ...) ]
|
|
|
|
tcp_dsack - BOOLEAN
|
|
Allows TCP to send "duplicate" SACKs.
|
|
|
|
tcp_early_retrans - INTEGER
|
|
Tail loss probe (TLP) converts RTOs occurring due to tail
|
|
losses into fast recovery (draft-ietf-tcpm-rack). Note that
|
|
TLP requires RACK to function properly (see tcp_recovery below)
|
|
Possible values:
|
|
0 disables TLP
|
|
3 or 4 enables TLP
|
|
Default: 3
|
|
|
|
tcp_ecn - INTEGER
|
|
Control use of Explicit Congestion Notification (ECN) by TCP.
|
|
ECN is used only when both ends of the TCP connection indicate
|
|
support for it. This feature is useful in avoiding losses due
|
|
to congestion by allowing supporting routers to signal
|
|
congestion before having to drop packets.
|
|
Possible values are:
|
|
0 Disable ECN. Neither initiate nor accept ECN.
|
|
1 Enable ECN when requested by incoming connections and
|
|
also request ECN on outgoing connection attempts.
|
|
2 Enable ECN when requested by incoming connections
|
|
but do not request ECN on outgoing connections.
|
|
Default: 2
|
|
|
|
tcp_ecn_fallback - BOOLEAN
|
|
If the kernel detects that ECN connection misbehaves, enable fall
|
|
back to non-ECN. Currently, this knob implements the fallback
|
|
from RFC3168, section 6.1.1.1., but we reserve that in future,
|
|
additional detection mechanisms could be implemented under this
|
|
knob. The value is not used, if tcp_ecn or per route (or congestion
|
|
control) ECN settings are disabled.
|
|
Default: 1 (fallback enabled)
|
|
|
|
tcp_fack - BOOLEAN
|
|
This is a legacy option, it has no effect anymore.
|
|
|
|
tcp_fin_timeout - INTEGER
|
|
The length of time an orphaned (no longer referenced by any
|
|
application) connection will remain in the FIN_WAIT_2 state
|
|
before it is aborted at the local end. While a perfectly
|
|
valid "receive only" state for an un-orphaned connection, an
|
|
orphaned connection in FIN_WAIT_2 state could otherwise wait
|
|
forever for the remote to close its end of the connection.
|
|
Cf. tcp_max_orphans
|
|
Default: 60 seconds
|
|
|
|
tcp_frto - INTEGER
|
|
Enables Forward RTO-Recovery (F-RTO) defined in RFC5682.
|
|
F-RTO is an enhanced recovery algorithm for TCP retransmission
|
|
timeouts. It is particularly beneficial in networks where the
|
|
RTT fluctuates (e.g., wireless). F-RTO is sender-side only
|
|
modification. It does not require any support from the peer.
|
|
|
|
By default it's enabled with a non-zero value. 0 disables F-RTO.
|
|
|
|
tcp_fwmark_accept - BOOLEAN
|
|
If set, incoming connections to listening sockets that do not have a
|
|
socket mark will set the mark of the accepting socket to the fwmark of
|
|
the incoming SYN packet. This will cause all packets on that connection
|
|
(starting from the first SYNACK) to be sent with that fwmark. The
|
|
listening socket's mark is unchanged. Listening sockets that already
|
|
have a fwmark set via setsockopt(SOL_SOCKET, SO_MARK, ...) are
|
|
unaffected.
|
|
|
|
Default: 0
|
|
|
|
tcp_invalid_ratelimit - INTEGER
|
|
Limit the maximal rate for sending duplicate acknowledgments
|
|
in response to incoming TCP packets that are for an existing
|
|
connection but that are invalid due to any of these reasons:
|
|
|
|
(a) out-of-window sequence number,
|
|
(b) out-of-window acknowledgment number, or
|
|
(c) PAWS (Protection Against Wrapped Sequence numbers) check failure
|
|
|
|
This can help mitigate simple "ack loop" DoS attacks, wherein
|
|
a buggy or malicious middlebox or man-in-the-middle can
|
|
rewrite TCP header fields in manner that causes each endpoint
|
|
to think that the other is sending invalid TCP segments, thus
|
|
causing each side to send an unterminating stream of duplicate
|
|
acknowledgments for invalid segments.
|
|
|
|
Using 0 disables rate-limiting of dupacks in response to
|
|
invalid segments; otherwise this value specifies the minimal
|
|
space between sending such dupacks, in milliseconds.
|
|
|
|
Default: 500 (milliseconds).
|
|
|
|
tcp_keepalive_time - INTEGER
|
|
How often TCP sends out keepalive messages when keepalive is enabled.
|
|
Default: 2hours.
|
|
|
|
tcp_keepalive_probes - INTEGER
|
|
How many keepalive probes TCP sends out, until it decides that the
|
|
connection is broken. Default value: 9.
|
|
|
|
tcp_keepalive_intvl - INTEGER
|
|
How frequently the probes are send out. Multiplied by
|
|
tcp_keepalive_probes it is time to kill not responding connection,
|
|
after probes started. Default value: 75sec i.e. connection
|
|
will be aborted after ~11 minutes of retries.
|
|
|
|
tcp_l3mdev_accept - BOOLEAN
|
|
Enables child sockets to inherit the L3 master device index.
|
|
Enabling this option allows a "global" listen socket to work
|
|
across L3 master domains (e.g., VRFs) with connected sockets
|
|
derived from the listen socket to be bound to the L3 domain in
|
|
which the packets originated. Only valid when the kernel was
|
|
compiled with CONFIG_NET_L3_MASTER_DEV.
|
|
Default: 0 (disabled)
|
|
|
|
tcp_low_latency - BOOLEAN
|
|
This is a legacy option, it has no effect anymore.
|
|
|
|
tcp_max_orphans - INTEGER
|
|
Maximal number of TCP sockets not attached to any user file handle,
|
|
held by system. If this number is exceeded orphaned connections are
|
|
reset immediately and warning is printed. This limit exists
|
|
only to prevent simple DoS attacks, you _must_ not rely on this
|
|
or lower the limit artificially, but rather increase it
|
|
(probably, after increasing installed memory),
|
|
if network conditions require more than default value,
|
|
and tune network services to linger and kill such states
|
|
more aggressively. Let me to remind again: each orphan eats
|
|
up to ~64K of unswappable memory.
|
|
|
|
tcp_max_syn_backlog - INTEGER
|
|
Maximal number of remembered connection requests, which have not
|
|
received an acknowledgment from connecting client.
|
|
The minimal value is 128 for low memory machines, and it will
|
|
increase in proportion to the memory of machine.
|
|
If server suffers from overload, try increasing this number.
|
|
|
|
tcp_max_tw_buckets - INTEGER
|
|
Maximal number of timewait sockets held by system simultaneously.
|
|
If this number is exceeded time-wait socket is immediately destroyed
|
|
and warning is printed. This limit exists only to prevent
|
|
simple DoS attacks, you _must_ not lower the limit artificially,
|
|
but rather increase it (probably, after increasing installed memory),
|
|
if network conditions require more than default value.
|
|
|
|
tcp_mem - vector of 3 INTEGERs: min, pressure, max
|
|
min: below this number of pages TCP is not bothered about its
|
|
memory appetite.
|
|
|
|
pressure: when amount of memory allocated by TCP exceeds this number
|
|
of pages, TCP moderates its memory consumption and enters memory
|
|
pressure mode, which is exited when memory consumption falls
|
|
under "min".
|
|
|
|
max: number of pages allowed for queueing by all TCP sockets.
|
|
|
|
Defaults are calculated at boot time from amount of available
|
|
memory.
|
|
|
|
tcp_min_rtt_wlen - INTEGER
|
|
The window length of the windowed min filter to track the minimum RTT.
|
|
A shorter window lets a flow more quickly pick up new (higher)
|
|
minimum RTT when it is moved to a longer path (e.g., due to traffic
|
|
engineering). A longer window makes the filter more resistant to RTT
|
|
inflations such as transient congestion. The unit is seconds.
|
|
Possible values: 0 - 86400 (1 day)
|
|
Default: 300
|
|
|
|
tcp_moderate_rcvbuf - BOOLEAN
|
|
If set, TCP performs receive buffer auto-tuning, attempting to
|
|
automatically size the buffer (no greater than tcp_rmem[2]) to
|
|
match the size required by the path for full throughput. Enabled by
|
|
default.
|
|
|
|
tcp_mtu_probing - INTEGER
|
|
Controls TCP Packetization-Layer Path MTU Discovery. Takes three
|
|
values:
|
|
0 - Disabled
|
|
1 - Disabled by default, enabled when an ICMP black hole detected
|
|
2 - Always enabled, use initial MSS of tcp_base_mss.
|
|
|
|
tcp_probe_interval - UNSIGNED INTEGER
|
|
Controls how often to start TCP Packetization-Layer Path MTU
|
|
Discovery reprobe. The default is reprobing every 10 minutes as
|
|
per RFC4821.
|
|
|
|
tcp_probe_threshold - INTEGER
|
|
Controls when TCP Packetization-Layer Path MTU Discovery probing
|
|
will stop in respect to the width of search range in bytes. Default
|
|
is 8 bytes.
|
|
|
|
tcp_no_metrics_save - BOOLEAN
|
|
By default, TCP saves various connection metrics in the route cache
|
|
when the connection closes, so that connections established in the
|
|
near future can use these to set initial conditions. Usually, this
|
|
increases overall performance, but may sometimes cause performance
|
|
degradation. If set, TCP will not cache metrics on closing
|
|
connections.
|
|
|
|
tcp_orphan_retries - INTEGER
|
|
This value influences the timeout of a locally closed TCP connection,
|
|
when RTO retransmissions remain unacknowledged.
|
|
See tcp_retries2 for more details.
|
|
|
|
The default value is 8.
|
|
If your machine is a loaded WEB server,
|
|
you should think about lowering this value, such sockets
|
|
may consume significant resources. Cf. tcp_max_orphans.
|
|
|
|
tcp_recovery - INTEGER
|
|
This value is a bitmap to enable various experimental loss recovery
|
|
features.
|
|
|
|
RACK: 0x1 enables the RACK loss detection for fast detection of lost
|
|
retransmissions and tail drops. It also subsumes and disables
|
|
RFC6675 recovery for SACK connections.
|
|
RACK: 0x2 makes RACK's reordering window static (min_rtt/4).
|
|
RACK: 0x4 disables RACK's DUPACK threshold heuristic
|
|
|
|
Default: 0x1
|
|
|
|
tcp_reordering - INTEGER
|
|
Initial reordering level of packets in a TCP stream.
|
|
TCP stack can then dynamically adjust flow reordering level
|
|
between this initial value and tcp_max_reordering
|
|
Default: 3
|
|
|
|
tcp_max_reordering - INTEGER
|
|
Maximal reordering level of packets in a TCP stream.
|
|
300 is a fairly conservative value, but you might increase it
|
|
if paths are using per packet load balancing (like bonding rr mode)
|
|
Default: 300
|
|
|
|
tcp_retrans_collapse - BOOLEAN
|
|
Bug-to-bug compatibility with some broken printers.
|
|
On retransmit try to send bigger packets to work around bugs in
|
|
certain TCP stacks.
|
|
|
|
tcp_retries1 - INTEGER
|
|
This value influences the time, after which TCP decides, that
|
|
something is wrong due to unacknowledged RTO retransmissions,
|
|
and reports this suspicion to the network layer.
|
|
See tcp_retries2 for more details.
|
|
|
|
RFC 1122 recommends at least 3 retransmissions, which is the
|
|
default.
|
|
|
|
tcp_retries2 - INTEGER
|
|
This value influences the timeout of an alive TCP connection,
|
|
when RTO retransmissions remain unacknowledged.
|
|
Given a value of N, a hypothetical TCP connection following
|
|
exponential backoff with an initial RTO of TCP_RTO_MIN would
|
|
retransmit N times before killing the connection at the (N+1)th RTO.
|
|
|
|
The default value of 15 yields a hypothetical timeout of 924.6
|
|
seconds and is a lower bound for the effective timeout.
|
|
TCP will effectively time out at the first RTO which exceeds the
|
|
hypothetical timeout.
|
|
|
|
RFC 1122 recommends at least 100 seconds for the timeout,
|
|
which corresponds to a value of at least 8.
|
|
|
|
tcp_rfc1337 - BOOLEAN
|
|
If set, the TCP stack behaves conforming to RFC1337. If unset,
|
|
we are not conforming to RFC, but prevent TCP TIME_WAIT
|
|
assassination.
|
|
Default: 0
|
|
|
|
tcp_rmem - vector of 3 INTEGERs: min, default, max
|
|
min: Minimal size of receive buffer used by TCP sockets.
|
|
It is guaranteed to each TCP socket, even under moderate memory
|
|
pressure.
|
|
Default: 4K
|
|
|
|
default: initial size of receive buffer used by TCP sockets.
|
|
This value overrides net.core.rmem_default used by other protocols.
|
|
Default: 87380 bytes. This value results in window of 65535 with
|
|
default setting of tcp_adv_win_scale and tcp_app_win:0 and a bit
|
|
less for default tcp_app_win. See below about these variables.
|
|
|
|
max: maximal size of receive buffer allowed for automatically
|
|
selected receiver buffers for TCP socket. This value does not override
|
|
net.core.rmem_max. Calling setsockopt() with SO_RCVBUF disables
|
|
automatic tuning of that socket's receive buffer size, in which
|
|
case this value is ignored.
|
|
Default: between 87380B and 6MB, depending on RAM size.
|
|
|
|
tcp_sack - BOOLEAN
|
|
Enable select acknowledgments (SACKS).
|
|
|
|
tcp_comp_sack_delay_ns - LONG INTEGER
|
|
TCP tries to reduce number of SACK sent, using a timer
|
|
based on 5% of SRTT, capped by this sysctl, in nano seconds.
|
|
The default is 1ms, based on TSO autosizing period.
|
|
|
|
Default : 1,000,000 ns (1 ms)
|
|
|
|
tcp_comp_sack_nr - INTEGER
|
|
Max number of SACK that can be compressed.
|
|
Using 0 disables SACK compression.
|
|
|
|
Default : 44
|
|
|
|
tcp_slow_start_after_idle - BOOLEAN
|
|
If set, provide RFC2861 behavior and time out the congestion
|
|
window after an idle period. An idle period is defined at
|
|
the current RTO. If unset, the congestion window will not
|
|
be timed out after an idle period.
|
|
Default: 1
|
|
|
|
tcp_stdurg - BOOLEAN
|
|
Use the Host requirements interpretation of the TCP urgent pointer field.
|
|
Most hosts use the older BSD interpretation, so if you turn this on
|
|
Linux might not communicate correctly with them.
|
|
Default: FALSE
|
|
|
|
tcp_synack_retries - INTEGER
|
|
Number of times SYNACKs for a passive TCP connection attempt will
|
|
be retransmitted. Should not be higher than 255. Default value
|
|
is 5, which corresponds to 31seconds till the last retransmission
|
|
with the current initial RTO of 1second. With this the final timeout
|
|
for a passive TCP connection will happen after 63seconds.
|
|
|
|
tcp_syncookies - BOOLEAN
|
|
Only valid when the kernel was compiled with CONFIG_SYN_COOKIES
|
|
Send out syncookies when the syn backlog queue of a socket
|
|
overflows. This is to prevent against the common 'SYN flood attack'
|
|
Default: 1
|
|
|
|
Note, that syncookies is fallback facility.
|
|
It MUST NOT be used to help highly loaded servers to stand
|
|
against legal connection rate. If you see SYN flood warnings
|
|
in your logs, but investigation shows that they occur
|
|
because of overload with legal connections, you should tune
|
|
another parameters until this warning disappear.
|
|
See: tcp_max_syn_backlog, tcp_synack_retries, tcp_abort_on_overflow.
|
|
|
|
syncookies seriously violate TCP protocol, do not allow
|
|
to use TCP extensions, can result in serious degradation
|
|
of some services (f.e. SMTP relaying), visible not by you,
|
|
but your clients and relays, contacting you. While you see
|
|
SYN flood warnings in logs not being really flooded, your server
|
|
is seriously misconfigured.
|
|
|
|
If you want to test which effects syncookies have to your
|
|
network connections you can set this knob to 2 to enable
|
|
unconditionally generation of syncookies.
|
|
|
|
tcp_fastopen - INTEGER
|
|
Enable TCP Fast Open (RFC7413) to send and accept data in the opening
|
|
SYN packet.
|
|
|
|
The client support is enabled by flag 0x1 (on by default). The client
|
|
then must use sendmsg() or sendto() with the MSG_FASTOPEN flag,
|
|
rather than connect() to send data in SYN.
|
|
|
|
The server support is enabled by flag 0x2 (off by default). Then
|
|
either enable for all listeners with another flag (0x400) or
|
|
enable individual listeners via TCP_FASTOPEN socket option with
|
|
the option value being the length of the syn-data backlog.
|
|
|
|
The values (bitmap) are
|
|
0x1: (client) enables sending data in the opening SYN on the client.
|
|
0x2: (server) enables the server support, i.e., allowing data in
|
|
a SYN packet to be accepted and passed to the
|
|
application before 3-way handshake finishes.
|
|
0x4: (client) send data in the opening SYN regardless of cookie
|
|
availability and without a cookie option.
|
|
0x200: (server) accept data-in-SYN w/o any cookie option present.
|
|
0x400: (server) enable all listeners to support Fast Open by
|
|
default without explicit TCP_FASTOPEN socket option.
|
|
|
|
Default: 0x1
|
|
|
|
Note that that additional client or server features are only
|
|
effective if the basic support (0x1 and 0x2) are enabled respectively.
|
|
|
|
tcp_fastopen_blackhole_timeout_sec - INTEGER
|
|
Initial time period in second to disable Fastopen on active TCP sockets
|
|
when a TFO firewall blackhole issue happens.
|
|
This time period will grow exponentially when more blackhole issues
|
|
get detected right after Fastopen is re-enabled and will reset to
|
|
initial value when the blackhole issue goes away.
|
|
0 to disable the blackhole detection.
|
|
By default, it is set to 1hr.
|
|
|
|
tcp_syn_retries - INTEGER
|
|
Number of times initial SYNs for an active TCP connection attempt
|
|
will be retransmitted. Should not be higher than 127. Default value
|
|
is 6, which corresponds to 63seconds till the last retransmission
|
|
with the current initial RTO of 1second. With this the final timeout
|
|
for an active TCP connection attempt will happen after 127seconds.
|
|
|
|
tcp_timestamps - INTEGER
|
|
Enable timestamps as defined in RFC1323.
|
|
0: Disabled.
|
|
1: Enable timestamps as defined in RFC1323 and use random offset for
|
|
each connection rather than only using the current time.
|
|
2: Like 1, but without random offsets.
|
|
Default: 1
|
|
|
|
tcp_min_tso_segs - INTEGER
|
|
Minimal number of segments per TSO frame.
|
|
Since linux-3.12, TCP does an automatic sizing of TSO frames,
|
|
depending on flow rate, instead of filling 64Kbytes packets.
|
|
For specific usages, it's possible to force TCP to build big
|
|
TSO frames. Note that TCP stack might split too big TSO packets
|
|
if available window is too small.
|
|
Default: 2
|
|
|
|
tcp_pacing_ss_ratio - INTEGER
|
|
sk->sk_pacing_rate is set by TCP stack using a ratio applied
|
|
to current rate. (current_rate = cwnd * mss / srtt)
|
|
If TCP is in slow start, tcp_pacing_ss_ratio is applied
|
|
to let TCP probe for bigger speeds, assuming cwnd can be
|
|
doubled every other RTT.
|
|
Default: 200
|
|
|
|
tcp_pacing_ca_ratio - INTEGER
|
|
sk->sk_pacing_rate is set by TCP stack using a ratio applied
|
|
to current rate. (current_rate = cwnd * mss / srtt)
|
|
If TCP is in congestion avoidance phase, tcp_pacing_ca_ratio
|
|
is applied to conservatively probe for bigger throughput.
|
|
Default: 120
|
|
|
|
tcp_tso_win_divisor - INTEGER
|
|
This allows control over what percentage of the congestion window
|
|
can be consumed by a single TSO frame.
|
|
The setting of this parameter is a choice between burstiness and
|
|
building larger TSO frames.
|
|
Default: 3
|
|
|
|
tcp_tw_reuse - INTEGER
|
|
Enable reuse of TIME-WAIT sockets for new connections when it is
|
|
safe from protocol viewpoint.
|
|
0 - disable
|
|
1 - global enable
|
|
2 - enable for loopback traffic only
|
|
It should not be changed without advice/request of technical
|
|
experts.
|
|
Default: 2
|
|
|
|
tcp_window_scaling - BOOLEAN
|
|
Enable window scaling as defined in RFC1323.
|
|
|
|
tcp_wmem - vector of 3 INTEGERs: min, default, max
|
|
min: Amount of memory reserved for send buffers for TCP sockets.
|
|
Each TCP socket has rights to use it due to fact of its birth.
|
|
Default: 4K
|
|
|
|
default: initial size of send buffer used by TCP sockets. This
|
|
value overrides net.core.wmem_default used by other protocols.
|
|
It is usually lower than net.core.wmem_default.
|
|
Default: 16K
|
|
|
|
max: Maximal amount of memory allowed for automatically tuned
|
|
send buffers for TCP sockets. This value does not override
|
|
net.core.wmem_max. Calling setsockopt() with SO_SNDBUF disables
|
|
automatic tuning of that socket's send buffer size, in which case
|
|
this value is ignored.
|
|
Default: between 64K and 4MB, depending on RAM size.
|
|
|
|
tcp_notsent_lowat - UNSIGNED INTEGER
|
|
A TCP socket can control the amount of unsent bytes in its write queue,
|
|
thanks to TCP_NOTSENT_LOWAT socket option. poll()/select()/epoll()
|
|
reports POLLOUT events if the amount of unsent bytes is below a per
|
|
socket value, and if the write queue is not full. sendmsg() will
|
|
also not add new buffers if the limit is hit.
|
|
|
|
This global variable controls the amount of unsent data for
|
|
sockets not using TCP_NOTSENT_LOWAT. For these sockets, a change
|
|
to the global variable has immediate effect.
|
|
|
|
Default: UINT_MAX (0xFFFFFFFF)
|
|
|
|
tcp_workaround_signed_windows - BOOLEAN
|
|
If set, assume no receipt of a window scaling option means the
|
|
remote TCP is broken and treats the window as a signed quantity.
|
|
If unset, assume the remote TCP is not broken even if we do
|
|
not receive a window scaling option from them.
|
|
Default: 0
|
|
|
|
tcp_thin_linear_timeouts - BOOLEAN
|
|
Enable dynamic triggering of linear timeouts for thin streams.
|
|
If set, a check is performed upon retransmission by timeout to
|
|
determine if the stream is thin (less than 4 packets in flight).
|
|
As long as the stream is found to be thin, up to 6 linear
|
|
timeouts may be performed before exponential backoff mode is
|
|
initiated. This improves retransmission latency for
|
|
non-aggressive thin streams, often found to be time-dependent.
|
|
For more information on thin streams, see
|
|
Documentation/networking/tcp-thin.txt
|
|
Default: 0
|
|
|
|
tcp_limit_output_bytes - INTEGER
|
|
Controls TCP Small Queue limit per tcp socket.
|
|
TCP bulk sender tends to increase packets in flight until it
|
|
gets losses notifications. With SNDBUF autotuning, this can
|
|
result in a large amount of packets queued on the local machine
|
|
(e.g.: qdiscs, CPU backlog, or device) hurting latency of other
|
|
flows, for typical pfifo_fast qdiscs. tcp_limit_output_bytes
|
|
limits the number of bytes on qdisc or device to reduce artificial
|
|
RTT/cwnd and reduce bufferbloat.
|
|
Default: 1048576 (16 * 65536)
|
|
|
|
tcp_challenge_ack_limit - INTEGER
|
|
Limits number of Challenge ACK sent per second, as recommended
|
|
in RFC 5961 (Improving TCP's Robustness to Blind In-Window Attacks)
|
|
Default: 100
|
|
|
|
tcp_rx_skb_cache - BOOLEAN
|
|
Controls a per TCP socket cache of one skb, that might help
|
|
performance of some workloads. This might be dangerous
|
|
on systems with a lot of TCP sockets, since it increases
|
|
memory usage.
|
|
|
|
Default: 0 (disabled)
|
|
|
|
UDP variables:
|
|
|
|
udp_l3mdev_accept - BOOLEAN
|
|
Enabling this option allows a "global" bound socket to work
|
|
across L3 master domains (e.g., VRFs) with packets capable of
|
|
being received regardless of the L3 domain in which they
|
|
originated. Only valid when the kernel was compiled with
|
|
CONFIG_NET_L3_MASTER_DEV.
|
|
Default: 0 (disabled)
|
|
|
|
udp_mem - vector of 3 INTEGERs: min, pressure, max
|
|
Number of pages allowed for queueing by all UDP sockets.
|
|
|
|
min: Below this number of pages UDP is not bothered about its
|
|
memory appetite. When amount of memory allocated by UDP exceeds
|
|
this number, UDP starts to moderate memory usage.
|
|
|
|
pressure: This value was introduced to follow format of tcp_mem.
|
|
|
|
max: Number of pages allowed for queueing by all UDP sockets.
|
|
|
|
Default is calculated at boot time from amount of available memory.
|
|
|
|
udp_rmem_min - INTEGER
|
|
Minimal size of receive buffer used by UDP sockets in moderation.
|
|
Each UDP socket is able to use the size for receiving data, even if
|
|
total pages of UDP sockets exceed udp_mem pressure. The unit is byte.
|
|
Default: 4K
|
|
|
|
udp_wmem_min - INTEGER
|
|
Minimal size of send buffer used by UDP sockets in moderation.
|
|
Each UDP socket is able to use the size for sending data, even if
|
|
total pages of UDP sockets exceed udp_mem pressure. The unit is byte.
|
|
Default: 4K
|
|
|
|
RAW variables:
|
|
|
|
raw_l3mdev_accept - BOOLEAN
|
|
Enabling this option allows a "global" bound socket to work
|
|
across L3 master domains (e.g., VRFs) with packets capable of
|
|
being received regardless of the L3 domain in which they
|
|
originated. Only valid when the kernel was compiled with
|
|
CONFIG_NET_L3_MASTER_DEV.
|
|
Default: 1 (enabled)
|
|
|
|
CIPSOv4 Variables:
|
|
|
|
cipso_cache_enable - BOOLEAN
|
|
If set, enable additions to and lookups from the CIPSO label mapping
|
|
cache. If unset, additions are ignored and lookups always result in a
|
|
miss. However, regardless of the setting the cache is still
|
|
invalidated when required when means you can safely toggle this on and
|
|
off and the cache will always be "safe".
|
|
Default: 1
|
|
|
|
cipso_cache_bucket_size - INTEGER
|
|
The CIPSO label cache consists of a fixed size hash table with each
|
|
hash bucket containing a number of cache entries. This variable limits
|
|
the number of entries in each hash bucket; the larger the value the
|
|
more CIPSO label mappings that can be cached. When the number of
|
|
entries in a given hash bucket reaches this limit adding new entries
|
|
causes the oldest entry in the bucket to be removed to make room.
|
|
Default: 10
|
|
|
|
cipso_rbm_optfmt - BOOLEAN
|
|
Enable the "Optimized Tag 1 Format" as defined in section 3.4.2.6 of
|
|
the CIPSO draft specification (see Documentation/netlabel for details).
|
|
This means that when set the CIPSO tag will be padded with empty
|
|
categories in order to make the packet data 32-bit aligned.
|
|
Default: 0
|
|
|
|
cipso_rbm_structvalid - BOOLEAN
|
|
If set, do a very strict check of the CIPSO option when
|
|
ip_options_compile() is called. If unset, relax the checks done during
|
|
ip_options_compile(). Either way is "safe" as errors are caught else
|
|
where in the CIPSO processing code but setting this to 0 (False) should
|
|
result in less work (i.e. it should be faster) but could cause problems
|
|
with other implementations that require strict checking.
|
|
Default: 0
|
|
|
|
IP Variables:
|
|
|
|
ip_local_port_range - 2 INTEGERS
|
|
Defines the local port range that is used by TCP and UDP to
|
|
choose the local port. The first number is the first, the
|
|
second the last local port number.
|
|
If possible, it is better these numbers have different parity.
|
|
(one even and one odd values)
|
|
The default values are 32768 and 60999 respectively.
|
|
|
|
ip_local_reserved_ports - list of comma separated ranges
|
|
Specify the ports which are reserved for known third-party
|
|
applications. These ports will not be used by automatic port
|
|
assignments (e.g. when calling connect() or bind() with port
|
|
number 0). Explicit port allocation behavior is unchanged.
|
|
|
|
The format used for both input and output is a comma separated
|
|
list of ranges (e.g. "1,2-4,10-10" for ports 1, 2, 3, 4 and
|
|
10). Writing to the file will clear all previously reserved
|
|
ports and update the current list with the one given in the
|
|
input.
|
|
|
|
Note that ip_local_port_range and ip_local_reserved_ports
|
|
settings are independent and both are considered by the kernel
|
|
when determining which ports are available for automatic port
|
|
assignments.
|
|
|
|
You can reserve ports which are not in the current
|
|
ip_local_port_range, e.g.:
|
|
|
|
$ cat /proc/sys/net/ipv4/ip_local_port_range
|
|
32000 60999
|
|
$ cat /proc/sys/net/ipv4/ip_local_reserved_ports
|
|
8080,9148
|
|
|
|
although this is redundant. However such a setting is useful
|
|
if later the port range is changed to a value that will
|
|
include the reserved ports.
|
|
|
|
Default: Empty
|
|
|
|
ip_unprivileged_port_start - INTEGER
|
|
This is a per-namespace sysctl. It defines the first
|
|
unprivileged port in the network namespace. Privileged ports
|
|
require root or CAP_NET_BIND_SERVICE in order to bind to them.
|
|
To disable all privileged ports, set this to 0. It may not
|
|
overlap with the ip_local_reserved_ports range.
|
|
|
|
Default: 1024
|
|
|
|
ip_nonlocal_bind - BOOLEAN
|
|
If set, allows processes to bind() to non-local IP addresses,
|
|
which can be quite useful - but may break some applications.
|
|
Default: 0
|
|
|
|
ip_dynaddr - BOOLEAN
|
|
If set non-zero, enables support for dynamic addresses.
|
|
If set to a non-zero value larger than 1, a kernel log
|
|
message will be printed when dynamic address rewriting
|
|
occurs.
|
|
Default: 0
|
|
|
|
ip_early_demux - BOOLEAN
|
|
Optimize input packet processing down to one demux for
|
|
certain kinds of local sockets. Currently we only do this
|
|
for established TCP and connected UDP sockets.
|
|
|
|
It may add an additional cost for pure routing workloads that
|
|
reduces overall throughput, in such case you should disable it.
|
|
Default: 1
|
|
|
|
tcp_early_demux - BOOLEAN
|
|
Enable early demux for established TCP sockets.
|
|
Default: 1
|
|
|
|
udp_early_demux - BOOLEAN
|
|
Enable early demux for connected UDP sockets. Disable this if
|
|
your system could experience more unconnected load.
|
|
Default: 1
|
|
|
|
icmp_echo_ignore_all - BOOLEAN
|
|
If set non-zero, then the kernel will ignore all ICMP ECHO
|
|
requests sent to it.
|
|
Default: 0
|
|
|
|
icmp_echo_ignore_broadcasts - BOOLEAN
|
|
If set non-zero, then the kernel will ignore all ICMP ECHO and
|
|
TIMESTAMP requests sent to it via broadcast/multicast.
|
|
Default: 1
|
|
|
|
icmp_ratelimit - INTEGER
|
|
Limit the maximal rates for sending ICMP packets whose type matches
|
|
icmp_ratemask (see below) to specific targets.
|
|
0 to disable any limiting,
|
|
otherwise the minimal space between responses in milliseconds.
|
|
Note that another sysctl, icmp_msgs_per_sec limits the number
|
|
of ICMP packets sent on all targets.
|
|
Default: 1000
|
|
|
|
icmp_msgs_per_sec - INTEGER
|
|
Limit maximal number of ICMP packets sent per second from this host.
|
|
Only messages whose type matches icmp_ratemask (see below) are
|
|
controlled by this limit.
|
|
Default: 1000
|
|
|
|
icmp_msgs_burst - INTEGER
|
|
icmp_msgs_per_sec controls number of ICMP packets sent per second,
|
|
while icmp_msgs_burst controls the burst size of these packets.
|
|
Default: 50
|
|
|
|
icmp_ratemask - INTEGER
|
|
Mask made of ICMP types for which rates are being limited.
|
|
Significant bits: IHGFEDCBA9876543210
|
|
Default mask: 0000001100000011000 (6168)
|
|
|
|
Bit definitions (see include/linux/icmp.h):
|
|
0 Echo Reply
|
|
3 Destination Unreachable *
|
|
4 Source Quench *
|
|
5 Redirect
|
|
8 Echo Request
|
|
B Time Exceeded *
|
|
C Parameter Problem *
|
|
D Timestamp Request
|
|
E Timestamp Reply
|
|
F Info Request
|
|
G Info Reply
|
|
H Address Mask Request
|
|
I Address Mask Reply
|
|
|
|
* These are rate limited by default (see default mask above)
|
|
|
|
icmp_ignore_bogus_error_responses - BOOLEAN
|
|
Some routers violate RFC1122 by sending bogus responses to broadcast
|
|
frames. Such violations are normally logged via a kernel warning.
|
|
If this is set to TRUE, the kernel will not give such warnings, which
|
|
will avoid log file clutter.
|
|
Default: 1
|
|
|
|
icmp_errors_use_inbound_ifaddr - BOOLEAN
|
|
|
|
If zero, icmp error messages are sent with the primary address of
|
|
the exiting interface.
|
|
|
|
If non-zero, the message will be sent with the primary address of
|
|
the interface that received the packet that caused the icmp error.
|
|
This is the behaviour network many administrators will expect from
|
|
a router. And it can make debugging complicated network layouts
|
|
much easier.
|
|
|
|
Note that if no primary address exists for the interface selected,
|
|
then the primary address of the first non-loopback interface that
|
|
has one will be used regardless of this setting.
|
|
|
|
Default: 0
|
|
|
|
igmp_max_memberships - INTEGER
|
|
Change the maximum number of multicast groups we can subscribe to.
|
|
Default: 20
|
|
|
|
Theoretical maximum value is bounded by having to send a membership
|
|
report in a single datagram (i.e. the report can't span multiple
|
|
datagrams, or risk confusing the switch and leaving groups you don't
|
|
intend to).
|
|
|
|
The number of supported groups 'M' is bounded by the number of group
|
|
report entries you can fit into a single datagram of 65535 bytes.
|
|
|
|
M = 65536-sizeof (ip header)/(sizeof(Group record))
|
|
|
|
Group records are variable length, with a minimum of 12 bytes.
|
|
So net.ipv4.igmp_max_memberships should not be set higher than:
|
|
|
|
(65536-24) / 12 = 5459
|
|
|
|
The value 5459 assumes no IP header options, so in practice
|
|
this number may be lower.
|
|
|
|
igmp_max_msf - INTEGER
|
|
Maximum number of addresses allowed in the source filter list for a
|
|
multicast group.
|
|
Default: 10
|
|
|
|
igmp_qrv - INTEGER
|
|
Controls the IGMP query robustness variable (see RFC2236 8.1).
|
|
Default: 2 (as specified by RFC2236 8.1)
|
|
Minimum: 1 (as specified by RFC6636 4.5)
|
|
|
|
force_igmp_version - INTEGER
|
|
0 - (default) No enforcement of a IGMP version, IGMPv1/v2 fallback
|
|
allowed. Will back to IGMPv3 mode again if all IGMPv1/v2 Querier
|
|
Present timer expires.
|
|
1 - Enforce to use IGMP version 1. Will also reply IGMPv1 report if
|
|
receive IGMPv2/v3 query.
|
|
2 - Enforce to use IGMP version 2. Will fallback to IGMPv1 if receive
|
|
IGMPv1 query message. Will reply report if receive IGMPv3 query.
|
|
3 - Enforce to use IGMP version 3. The same react with default 0.
|
|
|
|
Note: this is not the same with force_mld_version because IGMPv3 RFC3376
|
|
Security Considerations does not have clear description that we could
|
|
ignore other version messages completely as MLDv2 RFC3810. So make
|
|
this value as default 0 is recommended.
|
|
|
|
conf/interface/* changes special settings per interface (where
|
|
"interface" is the name of your network interface)
|
|
|
|
conf/all/* is special, changes the settings for all interfaces
|
|
|
|
log_martians - BOOLEAN
|
|
Log packets with impossible addresses to kernel log.
|
|
log_martians for the interface will be enabled if at least one of
|
|
conf/{all,interface}/log_martians is set to TRUE,
|
|
it will be disabled otherwise
|
|
|
|
accept_redirects - BOOLEAN
|
|
Accept ICMP redirect messages.
|
|
accept_redirects for the interface will be enabled if:
|
|
- both conf/{all,interface}/accept_redirects are TRUE in the case
|
|
forwarding for the interface is enabled
|
|
or
|
|
- at least one of conf/{all,interface}/accept_redirects is TRUE in the
|
|
case forwarding for the interface is disabled
|
|
accept_redirects for the interface will be disabled otherwise
|
|
default TRUE (host)
|
|
FALSE (router)
|
|
|
|
forwarding - BOOLEAN
|
|
Enable IP forwarding on this interface. This controls whether packets
|
|
received _on_ this interface can be forwarded.
|
|
|
|
mc_forwarding - BOOLEAN
|
|
Do multicast routing. The kernel needs to be compiled with CONFIG_MROUTE
|
|
and a multicast routing daemon is required.
|
|
conf/all/mc_forwarding must also be set to TRUE to enable multicast
|
|
routing for the interface
|
|
|
|
medium_id - INTEGER
|
|
Integer value used to differentiate the devices by the medium they
|
|
are attached to. Two devices can have different id values when
|
|
the broadcast packets are received only on one of them.
|
|
The default value 0 means that the device is the only interface
|
|
to its medium, value of -1 means that medium is not known.
|
|
|
|
Currently, it is used to change the proxy_arp behavior:
|
|
the proxy_arp feature is enabled for packets forwarded between
|
|
two devices attached to different media.
|
|
|
|
proxy_arp - BOOLEAN
|
|
Do proxy arp.
|
|
proxy_arp for the interface will be enabled if at least one of
|
|
conf/{all,interface}/proxy_arp is set to TRUE,
|
|
it will be disabled otherwise
|
|
|
|
proxy_arp_pvlan - BOOLEAN
|
|
Private VLAN proxy arp.
|
|
Basically allow proxy arp replies back to the same interface
|
|
(from which the ARP request/solicitation was received).
|
|
|
|
This is done to support (ethernet) switch features, like RFC
|
|
3069, where the individual ports are NOT allowed to
|
|
communicate with each other, but they are allowed to talk to
|
|
the upstream router. As described in RFC 3069, it is possible
|
|
to allow these hosts to communicate through the upstream
|
|
router by proxy_arp'ing. Don't need to be used together with
|
|
proxy_arp.
|
|
|
|
This technology is known by different names:
|
|
In RFC 3069 it is called VLAN Aggregation.
|
|
Cisco and Allied Telesyn call it Private VLAN.
|
|
Hewlett-Packard call it Source-Port filtering or port-isolation.
|
|
Ericsson call it MAC-Forced Forwarding (RFC Draft).
|
|
|
|
shared_media - BOOLEAN
|
|
Send(router) or accept(host) RFC1620 shared media redirects.
|
|
Overrides secure_redirects.
|
|
shared_media for the interface will be enabled if at least one of
|
|
conf/{all,interface}/shared_media is set to TRUE,
|
|
it will be disabled otherwise
|
|
default TRUE
|
|
|
|
secure_redirects - BOOLEAN
|
|
Accept ICMP redirect messages only to gateways listed in the
|
|
interface's current gateway list. Even if disabled, RFC1122 redirect
|
|
rules still apply.
|
|
Overridden by shared_media.
|
|
secure_redirects for the interface will be enabled if at least one of
|
|
conf/{all,interface}/secure_redirects is set to TRUE,
|
|
it will be disabled otherwise
|
|
default TRUE
|
|
|
|
send_redirects - BOOLEAN
|
|
Send redirects, if router.
|
|
send_redirects for the interface will be enabled if at least one of
|
|
conf/{all,interface}/send_redirects is set to TRUE,
|
|
it will be disabled otherwise
|
|
Default: TRUE
|
|
|
|
bootp_relay - BOOLEAN
|
|
Accept packets with source address 0.b.c.d destined
|
|
not to this host as local ones. It is supposed, that
|
|
BOOTP relay daemon will catch and forward such packets.
|
|
conf/all/bootp_relay must also be set to TRUE to enable BOOTP relay
|
|
for the interface
|
|
default FALSE
|
|
Not Implemented Yet.
|
|
|
|
accept_source_route - BOOLEAN
|
|
Accept packets with SRR option.
|
|
conf/all/accept_source_route must also be set to TRUE to accept packets
|
|
with SRR option on the interface
|
|
default TRUE (router)
|
|
FALSE (host)
|
|
|
|
accept_local - BOOLEAN
|
|
Accept packets with local source addresses. In combination with
|
|
suitable routing, this can be used to direct packets between two
|
|
local interfaces over the wire and have them accepted properly.
|
|
default FALSE
|
|
|
|
route_localnet - BOOLEAN
|
|
Do not consider loopback addresses as martian source or destination
|
|
while routing. This enables the use of 127/8 for local routing purposes.
|
|
default FALSE
|
|
|
|
rp_filter - INTEGER
|
|
0 - No source validation.
|
|
1 - Strict mode as defined in RFC3704 Strict Reverse Path
|
|
Each incoming packet is tested against the FIB and if the interface
|
|
is not the best reverse path the packet check will fail.
|
|
By default failed packets are discarded.
|
|
2 - Loose mode as defined in RFC3704 Loose Reverse Path
|
|
Each incoming packet's source address is also tested against the FIB
|
|
and if the source address is not reachable via any interface
|
|
the packet check will fail.
|
|
|
|
Current recommended practice in RFC3704 is to enable strict mode
|
|
to prevent IP spoofing from DDos attacks. If using asymmetric routing
|
|
or other complicated routing, then loose mode is recommended.
|
|
|
|
The max value from conf/{all,interface}/rp_filter is used
|
|
when doing source validation on the {interface}.
|
|
|
|
Default value is 0. Note that some distributions enable it
|
|
in startup scripts.
|
|
|
|
arp_filter - BOOLEAN
|
|
1 - Allows you to have multiple network interfaces on the same
|
|
subnet, and have the ARPs for each interface be answered
|
|
based on whether or not the kernel would route a packet from
|
|
the ARP'd IP out that interface (therefore you must use source
|
|
based routing for this to work). In other words it allows control
|
|
of which cards (usually 1) will respond to an arp request.
|
|
|
|
0 - (default) The kernel can respond to arp requests with addresses
|
|
from other interfaces. This may seem wrong but it usually makes
|
|
sense, because it increases the chance of successful communication.
|
|
IP addresses are owned by the complete host on Linux, not by
|
|
particular interfaces. Only for more complex setups like load-
|
|
balancing, does this behaviour cause problems.
|
|
|
|
arp_filter for the interface will be enabled if at least one of
|
|
conf/{all,interface}/arp_filter is set to TRUE,
|
|
it will be disabled otherwise
|
|
|
|
arp_announce - INTEGER
|
|
Define different restriction levels for announcing the local
|
|
source IP address from IP packets in ARP requests sent on
|
|
interface:
|
|
0 - (default) Use any local address, configured on any interface
|
|
1 - Try to avoid local addresses that are not in the target's
|
|
subnet for this interface. This mode is useful when target
|
|
hosts reachable via this interface require the source IP
|
|
address in ARP requests to be part of their logical network
|
|
configured on the receiving interface. When we generate the
|
|
request we will check all our subnets that include the
|
|
target IP and will preserve the source address if it is from
|
|
such subnet. If there is no such subnet we select source
|
|
address according to the rules for level 2.
|
|
2 - Always use the best local address for this target.
|
|
In this mode we ignore the source address in the IP packet
|
|
and try to select local address that we prefer for talks with
|
|
the target host. Such local address is selected by looking
|
|
for primary IP addresses on all our subnets on the outgoing
|
|
interface that include the target IP address. If no suitable
|
|
local address is found we select the first local address
|
|
we have on the outgoing interface or on all other interfaces,
|
|
with the hope we will receive reply for our request and
|
|
even sometimes no matter the source IP address we announce.
|
|
|
|
The max value from conf/{all,interface}/arp_announce is used.
|
|
|
|
Increasing the restriction level gives more chance for
|
|
receiving answer from the resolved target while decreasing
|
|
the level announces more valid sender's information.
|
|
|
|
arp_ignore - INTEGER
|
|
Define different modes for sending replies in response to
|
|
received ARP requests that resolve local target IP addresses:
|
|
0 - (default): reply for any local target IP address, configured
|
|
on any interface
|
|
1 - reply only if the target IP address is local address
|
|
configured on the incoming interface
|
|
2 - reply only if the target IP address is local address
|
|
configured on the incoming interface and both with the
|
|
sender's IP address are part from same subnet on this interface
|
|
3 - do not reply for local addresses configured with scope host,
|
|
only resolutions for global and link addresses are replied
|
|
4-7 - reserved
|
|
8 - do not reply for all local addresses
|
|
|
|
The max value from conf/{all,interface}/arp_ignore is used
|
|
when ARP request is received on the {interface}
|
|
|
|
arp_notify - BOOLEAN
|
|
Define mode for notification of address and device changes.
|
|
0 - (default): do nothing
|
|
1 - Generate gratuitous arp requests when device is brought up
|
|
or hardware address changes.
|
|
|
|
arp_accept - BOOLEAN
|
|
Define behavior for gratuitous ARP frames who's IP is not
|
|
already present in the ARP table:
|
|
0 - don't create new entries in the ARP table
|
|
1 - create new entries in the ARP table
|
|
|
|
Both replies and requests type gratuitous arp will trigger the
|
|
ARP table to be updated, if this setting is on.
|
|
|
|
If the ARP table already contains the IP address of the
|
|
gratuitous arp frame, the arp table will be updated regardless
|
|
if this setting is on or off.
|
|
|
|
mcast_solicit - INTEGER
|
|
The maximum number of multicast probes in INCOMPLETE state,
|
|
when the associated hardware address is unknown. Defaults
|
|
to 3.
|
|
|
|
ucast_solicit - INTEGER
|
|
The maximum number of unicast probes in PROBE state, when
|
|
the hardware address is being reconfirmed. Defaults to 3.
|
|
|
|
app_solicit - INTEGER
|
|
The maximum number of probes to send to the user space ARP daemon
|
|
via netlink before dropping back to multicast probes (see
|
|
mcast_resolicit). Defaults to 0.
|
|
|
|
mcast_resolicit - INTEGER
|
|
The maximum number of multicast probes after unicast and
|
|
app probes in PROBE state. Defaults to 0.
|
|
|
|
disable_policy - BOOLEAN
|
|
Disable IPSEC policy (SPD) for this interface
|
|
|
|
disable_xfrm - BOOLEAN
|
|
Disable IPSEC encryption on this interface, whatever the policy
|
|
|
|
igmpv2_unsolicited_report_interval - INTEGER
|
|
The interval in milliseconds in which the next unsolicited
|
|
IGMPv1 or IGMPv2 report retransmit will take place.
|
|
Default: 10000 (10 seconds)
|
|
|
|
igmpv3_unsolicited_report_interval - INTEGER
|
|
The interval in milliseconds in which the next unsolicited
|
|
IGMPv3 report retransmit will take place.
|
|
Default: 1000 (1 seconds)
|
|
|
|
promote_secondaries - BOOLEAN
|
|
When a primary IP address is removed from this interface
|
|
promote a corresponding secondary IP address instead of
|
|
removing all the corresponding secondary IP addresses.
|
|
|
|
drop_unicast_in_l2_multicast - BOOLEAN
|
|
Drop any unicast IP packets that are received in link-layer
|
|
multicast (or broadcast) frames.
|
|
This behavior (for multicast) is actually a SHOULD in RFC
|
|
1122, but is disabled by default for compatibility reasons.
|
|
Default: off (0)
|
|
|
|
drop_gratuitous_arp - BOOLEAN
|
|
Drop all gratuitous ARP frames, for example if there's a known
|
|
good ARP proxy on the network and such frames need not be used
|
|
(or in the case of 802.11, must not be used to prevent attacks.)
|
|
Default: off (0)
|
|
|
|
|
|
tag - INTEGER
|
|
Allows you to write a number, which can be used as required.
|
|
Default value is 0.
|
|
|
|
xfrm4_gc_thresh - INTEGER
|
|
(Obsolete since linux-4.14)
|
|
The threshold at which we will start garbage collecting for IPv4
|
|
destination cache entries. At twice this value the system will
|
|
refuse new allocations.
|
|
|
|
igmp_link_local_mcast_reports - BOOLEAN
|
|
Enable IGMP reports for link local multicast groups in the
|
|
224.0.0.X range.
|
|
Default TRUE
|
|
|
|
Alexey Kuznetsov.
|
|
kuznet@ms2.inr.ac.ru
|
|
|
|
Updated by:
|
|
Andi Kleen
|
|
ak@muc.de
|
|
Nicolas Delon
|
|
delon.nicolas@wanadoo.fr
|
|
|
|
|
|
|
|
|
|
/proc/sys/net/ipv6/* Variables:
|
|
|
|
IPv6 has no global variables such as tcp_*. tcp_* settings under ipv4/ also
|
|
apply to IPv6 [XXX?].
|
|
|
|
bindv6only - BOOLEAN
|
|
Default value for IPV6_V6ONLY socket option,
|
|
which restricts use of the IPv6 socket to IPv6 communication
|
|
only.
|
|
TRUE: disable IPv4-mapped address feature
|
|
FALSE: enable IPv4-mapped address feature
|
|
|
|
Default: FALSE (as specified in RFC3493)
|
|
|
|
flowlabel_consistency - BOOLEAN
|
|
Protect the consistency (and unicity) of flow label.
|
|
You have to disable it to use IPV6_FL_F_REFLECT flag on the
|
|
flow label manager.
|
|
TRUE: enabled
|
|
FALSE: disabled
|
|
Default: TRUE
|
|
|
|
auto_flowlabels - INTEGER
|
|
Automatically generate flow labels based on a flow hash of the
|
|
packet. This allows intermediate devices, such as routers, to
|
|
identify packet flows for mechanisms like Equal Cost Multipath
|
|
Routing (see RFC 6438).
|
|
0: automatic flow labels are completely disabled
|
|
1: automatic flow labels are enabled by default, they can be
|
|
disabled on a per socket basis using the IPV6_AUTOFLOWLABEL
|
|
socket option
|
|
2: automatic flow labels are allowed, they may be enabled on a
|
|
per socket basis using the IPV6_AUTOFLOWLABEL socket option
|
|
3: automatic flow labels are enabled and enforced, they cannot
|
|
be disabled by the socket option
|
|
Default: 1
|
|
|
|
flowlabel_state_ranges - BOOLEAN
|
|
Split the flow label number space into two ranges. 0-0x7FFFF is
|
|
reserved for the IPv6 flow manager facility, 0x80000-0xFFFFF
|
|
is reserved for stateless flow labels as described in RFC6437.
|
|
TRUE: enabled
|
|
FALSE: disabled
|
|
Default: true
|
|
|
|
flowlabel_reflect - BOOLEAN
|
|
Automatically reflect the flow label. Needed for Path MTU
|
|
Discovery to work with Equal Cost Multipath Routing in anycast
|
|
environments. See RFC 7690 and:
|
|
https://tools.ietf.org/html/draft-wang-6man-flow-label-reflection-01
|
|
TRUE: enabled
|
|
FALSE: disabled
|
|
Default: FALSE
|
|
|
|
fib_multipath_hash_policy - INTEGER
|
|
Controls which hash policy to use for multipath routes.
|
|
Default: 0 (Layer 3)
|
|
Possible values:
|
|
0 - Layer 3 (source and destination addresses plus flow label)
|
|
1 - Layer 4 (standard 5-tuple)
|
|
|
|
anycast_src_echo_reply - BOOLEAN
|
|
Controls the use of anycast addresses as source addresses for ICMPv6
|
|
echo reply
|
|
TRUE: enabled
|
|
FALSE: disabled
|
|
Default: FALSE
|
|
|
|
idgen_delay - INTEGER
|
|
Controls the delay in seconds after which time to retry
|
|
privacy stable address generation if a DAD conflict is
|
|
detected.
|
|
Default: 1 (as specified in RFC7217)
|
|
|
|
idgen_retries - INTEGER
|
|
Controls the number of retries to generate a stable privacy
|
|
address if a DAD conflict is detected.
|
|
Default: 3 (as specified in RFC7217)
|
|
|
|
mld_qrv - INTEGER
|
|
Controls the MLD query robustness variable (see RFC3810 9.1).
|
|
Default: 2 (as specified by RFC3810 9.1)
|
|
Minimum: 1 (as specified by RFC6636 4.5)
|
|
|
|
max_dst_opts_number - INTEGER
|
|
Maximum number of non-padding TLVs allowed in a Destination
|
|
options extension header. If this value is less than zero
|
|
then unknown options are disallowed and the number of known
|
|
TLVs allowed is the absolute value of this number.
|
|
Default: 8
|
|
|
|
max_hbh_opts_number - INTEGER
|
|
Maximum number of non-padding TLVs allowed in a Hop-by-Hop
|
|
options extension header. If this value is less than zero
|
|
then unknown options are disallowed and the number of known
|
|
TLVs allowed is the absolute value of this number.
|
|
Default: 8
|
|
|
|
max_dst_opts_length - INTEGER
|
|
Maximum length allowed for a Destination options extension
|
|
header.
|
|
Default: INT_MAX (unlimited)
|
|
|
|
max_hbh_length - INTEGER
|
|
Maximum length allowed for a Hop-by-Hop options extension
|
|
header.
|
|
Default: INT_MAX (unlimited)
|
|
|
|
skip_notify_on_dev_down - BOOLEAN
|
|
Controls whether an RTM_DELROUTE message is generated for routes
|
|
removed when a device is taken down or deleted. IPv4 does not
|
|
generate this message; IPv6 does by default. Setting this sysctl
|
|
to true skips the message, making IPv4 and IPv6 on par in relying
|
|
on userspace caches to track link events and evict routes.
|
|
Default: false (generate message)
|
|
|
|
IPv6 Fragmentation:
|
|
|
|
ip6frag_high_thresh - INTEGER
|
|
Maximum memory used to reassemble IPv6 fragments. When
|
|
ip6frag_high_thresh bytes of memory is allocated for this purpose,
|
|
the fragment handler will toss packets until ip6frag_low_thresh
|
|
is reached.
|
|
|
|
ip6frag_low_thresh - INTEGER
|
|
See ip6frag_high_thresh
|
|
|
|
ip6frag_time - INTEGER
|
|
Time in seconds to keep an IPv6 fragment in memory.
|
|
|
|
IPv6 Segment Routing:
|
|
|
|
seg6_flowlabel - INTEGER
|
|
Controls the behaviour of computing the flowlabel of outer
|
|
IPv6 header in case of SR T.encaps
|
|
|
|
-1 set flowlabel to zero.
|
|
0 copy flowlabel from Inner packet in case of Inner IPv6
|
|
(Set flowlabel to 0 in case IPv4/L2)
|
|
1 Compute the flowlabel using seg6_make_flowlabel()
|
|
|
|
Default is 0.
|
|
|
|
conf/default/*:
|
|
Change the interface-specific default settings.
|
|
|
|
|
|
conf/all/*:
|
|
Change all the interface-specific settings.
|
|
|
|
[XXX: Other special features than forwarding?]
|
|
|
|
conf/all/forwarding - BOOLEAN
|
|
Enable global IPv6 forwarding between all interfaces.
|
|
|
|
IPv4 and IPv6 work differently here; e.g. netfilter must be used
|
|
to control which interfaces may forward packets and which not.
|
|
|
|
This also sets all interfaces' Host/Router setting
|
|
'forwarding' to the specified value. See below for details.
|
|
|
|
This referred to as global forwarding.
|
|
|
|
proxy_ndp - BOOLEAN
|
|
Do proxy ndp.
|
|
|
|
fwmark_reflect - BOOLEAN
|
|
Controls the fwmark of kernel-generated IPv6 reply packets that are not
|
|
associated with a socket for example, TCP RSTs or ICMPv6 echo replies).
|
|
If unset, these packets have a fwmark of zero. If set, they have the
|
|
fwmark of the packet they are replying to.
|
|
Default: 0
|
|
|
|
conf/interface/*:
|
|
Change special settings per interface.
|
|
|
|
The functional behaviour for certain settings is different
|
|
depending on whether local forwarding is enabled or not.
|
|
|
|
accept_ra - INTEGER
|
|
Accept Router Advertisements; autoconfigure using them.
|
|
|
|
It also determines whether or not to transmit Router
|
|
Solicitations. If and only if the functional setting is to
|
|
accept Router Advertisements, Router Solicitations will be
|
|
transmitted.
|
|
|
|
Possible values are:
|
|
0 Do not accept Router Advertisements.
|
|
1 Accept Router Advertisements if forwarding is disabled.
|
|
2 Overrule forwarding behaviour. Accept Router Advertisements
|
|
even if forwarding is enabled.
|
|
|
|
Functional default: enabled if local forwarding is disabled.
|
|
disabled if local forwarding is enabled.
|
|
|
|
accept_ra_defrtr - BOOLEAN
|
|
Learn default router in Router Advertisement.
|
|
|
|
Functional default: enabled if accept_ra is enabled.
|
|
disabled if accept_ra is disabled.
|
|
|
|
accept_ra_from_local - BOOLEAN
|
|
Accept RA with source-address that is found on local machine
|
|
if the RA is otherwise proper and able to be accepted.
|
|
Default is to NOT accept these as it may be an un-intended
|
|
network loop.
|
|
|
|
Functional default:
|
|
enabled if accept_ra_from_local is enabled
|
|
on a specific interface.
|
|
disabled if accept_ra_from_local is disabled
|
|
on a specific interface.
|
|
|
|
accept_ra_min_hop_limit - INTEGER
|
|
Minimum hop limit Information in Router Advertisement.
|
|
|
|
Hop limit Information in Router Advertisement less than this
|
|
variable shall be ignored.
|
|
|
|
Default: 1
|
|
|
|
accept_ra_pinfo - BOOLEAN
|
|
Learn Prefix Information in Router Advertisement.
|
|
|
|
Functional default: enabled if accept_ra is enabled.
|
|
disabled if accept_ra is disabled.
|
|
|
|
accept_ra_rt_info_min_plen - INTEGER
|
|
Minimum prefix length of Route Information in RA.
|
|
|
|
Route Information w/ prefix smaller than this variable shall
|
|
be ignored.
|
|
|
|
Functional default: 0 if accept_ra_rtr_pref is enabled.
|
|
-1 if accept_ra_rtr_pref is disabled.
|
|
|
|
accept_ra_rt_info_max_plen - INTEGER
|
|
Maximum prefix length of Route Information in RA.
|
|
|
|
Route Information w/ prefix larger than this variable shall
|
|
be ignored.
|
|
|
|
Functional default: 0 if accept_ra_rtr_pref is enabled.
|
|
-1 if accept_ra_rtr_pref is disabled.
|
|
|
|
accept_ra_rtr_pref - BOOLEAN
|
|
Accept Router Preference in RA.
|
|
|
|
Functional default: enabled if accept_ra is enabled.
|
|
disabled if accept_ra is disabled.
|
|
|
|
accept_ra_mtu - BOOLEAN
|
|
Apply the MTU value specified in RA option 5 (RFC4861). If
|
|
disabled, the MTU specified in the RA will be ignored.
|
|
|
|
Functional default: enabled if accept_ra is enabled.
|
|
disabled if accept_ra is disabled.
|
|
|
|
accept_redirects - BOOLEAN
|
|
Accept Redirects.
|
|
|
|
Functional default: enabled if local forwarding is disabled.
|
|
disabled if local forwarding is enabled.
|
|
|
|
accept_source_route - INTEGER
|
|
Accept source routing (routing extension header).
|
|
|
|
>= 0: Accept only routing header type 2.
|
|
< 0: Do not accept routing header.
|
|
|
|
Default: 0
|
|
|
|
autoconf - BOOLEAN
|
|
Autoconfigure addresses using Prefix Information in Router
|
|
Advertisements.
|
|
|
|
Functional default: enabled if accept_ra_pinfo is enabled.
|
|
disabled if accept_ra_pinfo is disabled.
|
|
|
|
dad_transmits - INTEGER
|
|
The amount of Duplicate Address Detection probes to send.
|
|
Default: 1
|
|
|
|
forwarding - INTEGER
|
|
Configure interface-specific Host/Router behaviour.
|
|
|
|
Note: It is recommended to have the same setting on all
|
|
interfaces; mixed router/host scenarios are rather uncommon.
|
|
|
|
Possible values are:
|
|
0 Forwarding disabled
|
|
1 Forwarding enabled
|
|
|
|
FALSE (0):
|
|
|
|
By default, Host behaviour is assumed. This means:
|
|
|
|
1. IsRouter flag is not set in Neighbour Advertisements.
|
|
2. If accept_ra is TRUE (default), transmit Router
|
|
Solicitations.
|
|
3. If accept_ra is TRUE (default), accept Router
|
|
Advertisements (and do autoconfiguration).
|
|
4. If accept_redirects is TRUE (default), accept Redirects.
|
|
|
|
TRUE (1):
|
|
|
|
If local forwarding is enabled, Router behaviour is assumed.
|
|
This means exactly the reverse from the above:
|
|
|
|
1. IsRouter flag is set in Neighbour Advertisements.
|
|
2. Router Solicitations are not sent unless accept_ra is 2.
|
|
3. Router Advertisements are ignored unless accept_ra is 2.
|
|
4. Redirects are ignored.
|
|
|
|
Default: 0 (disabled) if global forwarding is disabled (default),
|
|
otherwise 1 (enabled).
|
|
|
|
hop_limit - INTEGER
|
|
Default Hop Limit to set.
|
|
Default: 64
|
|
|
|
mtu - INTEGER
|
|
Default Maximum Transfer Unit
|
|
Default: 1280 (IPv6 required minimum)
|
|
|
|
ip_nonlocal_bind - BOOLEAN
|
|
If set, allows processes to bind() to non-local IPv6 addresses,
|
|
which can be quite useful - but may break some applications.
|
|
Default: 0
|
|
|
|
router_probe_interval - INTEGER
|
|
Minimum interval (in seconds) between Router Probing described
|
|
in RFC4191.
|
|
|
|
Default: 60
|
|
|
|
router_solicitation_delay - INTEGER
|
|
Number of seconds to wait after interface is brought up
|
|
before sending Router Solicitations.
|
|
Default: 1
|
|
|
|
router_solicitation_interval - INTEGER
|
|
Number of seconds to wait between Router Solicitations.
|
|
Default: 4
|
|
|
|
router_solicitations - INTEGER
|
|
Number of Router Solicitations to send until assuming no
|
|
routers are present.
|
|
Default: 3
|
|
|
|
use_oif_addrs_only - BOOLEAN
|
|
When enabled, the candidate source addresses for destinations
|
|
routed via this interface are restricted to the set of addresses
|
|
configured on this interface (vis. RFC 6724, section 4).
|
|
|
|
Default: false
|
|
|
|
use_tempaddr - INTEGER
|
|
Preference for Privacy Extensions (RFC3041).
|
|
<= 0 : disable Privacy Extensions
|
|
== 1 : enable Privacy Extensions, but prefer public
|
|
addresses over temporary addresses.
|
|
> 1 : enable Privacy Extensions and prefer temporary
|
|
addresses over public addresses.
|
|
Default: 0 (for most devices)
|
|
-1 (for point-to-point devices and loopback devices)
|
|
|
|
temp_valid_lft - INTEGER
|
|
valid lifetime (in seconds) for temporary addresses.
|
|
Default: 604800 (7 days)
|
|
|
|
temp_prefered_lft - INTEGER
|
|
Preferred lifetime (in seconds) for temporary addresses.
|
|
Default: 86400 (1 day)
|
|
|
|
keep_addr_on_down - INTEGER
|
|
Keep all IPv6 addresses on an interface down event. If set static
|
|
global addresses with no expiration time are not flushed.
|
|
>0 : enabled
|
|
0 : system default
|
|
<0 : disabled
|
|
|
|
Default: 0 (addresses are removed)
|
|
|
|
max_desync_factor - INTEGER
|
|
Maximum value for DESYNC_FACTOR, which is a random value
|
|
that ensures that clients don't synchronize with each
|
|
other and generate new addresses at exactly the same time.
|
|
value is in seconds.
|
|
Default: 600
|
|
|
|
regen_max_retry - INTEGER
|
|
Number of attempts before give up attempting to generate
|
|
valid temporary addresses.
|
|
Default: 5
|
|
|
|
max_addresses - INTEGER
|
|
Maximum number of autoconfigured addresses per interface. Setting
|
|
to zero disables the limitation. It is not recommended to set this
|
|
value too large (or to zero) because it would be an easy way to
|
|
crash the kernel by allowing too many addresses to be created.
|
|
Default: 16
|
|
|
|
disable_ipv6 - BOOLEAN
|
|
Disable IPv6 operation. If accept_dad is set to 2, this value
|
|
will be dynamically set to TRUE if DAD fails for the link-local
|
|
address.
|
|
Default: FALSE (enable IPv6 operation)
|
|
|
|
When this value is changed from 1 to 0 (IPv6 is being enabled),
|
|
it will dynamically create a link-local address on the given
|
|
interface and start Duplicate Address Detection, if necessary.
|
|
|
|
When this value is changed from 0 to 1 (IPv6 is being disabled),
|
|
it will dynamically delete all addresses and routes on the given
|
|
interface. From now on it will not possible to add addresses/routes
|
|
to the selected interface.
|
|
|
|
accept_dad - INTEGER
|
|
Whether to accept DAD (Duplicate Address Detection).
|
|
0: Disable DAD
|
|
1: Enable DAD (default)
|
|
2: Enable DAD, and disable IPv6 operation if MAC-based duplicate
|
|
link-local address has been found.
|
|
|
|
DAD operation and mode on a given interface will be selected according
|
|
to the maximum value of conf/{all,interface}/accept_dad.
|
|
|
|
force_tllao - BOOLEAN
|
|
Enable sending the target link-layer address option even when
|
|
responding to a unicast neighbor solicitation.
|
|
Default: FALSE
|
|
|
|
Quoting from RFC 2461, section 4.4, Target link-layer address:
|
|
|
|
"The option MUST be included for multicast solicitations in order to
|
|
avoid infinite Neighbor Solicitation "recursion" when the peer node
|
|
does not have a cache entry to return a Neighbor Advertisements
|
|
message. When responding to unicast solicitations, the option can be
|
|
omitted since the sender of the solicitation has the correct link-
|
|
layer address; otherwise it would not have be able to send the unicast
|
|
solicitation in the first place. However, including the link-layer
|
|
address in this case adds little overhead and eliminates a potential
|
|
race condition where the sender deletes the cached link-layer address
|
|
prior to receiving a response to a previous solicitation."
|
|
|
|
ndisc_notify - BOOLEAN
|
|
Define mode for notification of address and device changes.
|
|
0 - (default): do nothing
|
|
1 - Generate unsolicited neighbour advertisements when device is brought
|
|
up or hardware address changes.
|
|
|
|
ndisc_tclass - INTEGER
|
|
The IPv6 Traffic Class to use by default when sending IPv6 Neighbor
|
|
Discovery (Router Solicitation, Router Advertisement, Neighbor
|
|
Solicitation, Neighbor Advertisement, Redirect) messages.
|
|
These 8 bits can be interpreted as 6 high order bits holding the DSCP
|
|
value and 2 low order bits representing ECN (which you probably want
|
|
to leave cleared).
|
|
0 - (default)
|
|
|
|
mldv1_unsolicited_report_interval - INTEGER
|
|
The interval in milliseconds in which the next unsolicited
|
|
MLDv1 report retransmit will take place.
|
|
Default: 10000 (10 seconds)
|
|
|
|
mldv2_unsolicited_report_interval - INTEGER
|
|
The interval in milliseconds in which the next unsolicited
|
|
MLDv2 report retransmit will take place.
|
|
Default: 1000 (1 second)
|
|
|
|
force_mld_version - INTEGER
|
|
0 - (default) No enforcement of a MLD version, MLDv1 fallback allowed
|
|
1 - Enforce to use MLD version 1
|
|
2 - Enforce to use MLD version 2
|
|
|
|
suppress_frag_ndisc - INTEGER
|
|
Control RFC 6980 (Security Implications of IPv6 Fragmentation
|
|
with IPv6 Neighbor Discovery) behavior:
|
|
1 - (default) discard fragmented neighbor discovery packets
|
|
0 - allow fragmented neighbor discovery packets
|
|
|
|
optimistic_dad - BOOLEAN
|
|
Whether to perform Optimistic Duplicate Address Detection (RFC 4429).
|
|
0: disabled (default)
|
|
1: enabled
|
|
|
|
Optimistic Duplicate Address Detection for the interface will be enabled
|
|
if at least one of conf/{all,interface}/optimistic_dad is set to 1,
|
|
it will be disabled otherwise.
|
|
|
|
use_optimistic - BOOLEAN
|
|
If enabled, do not classify optimistic addresses as deprecated during
|
|
source address selection. Preferred addresses will still be chosen
|
|
before optimistic addresses, subject to other ranking in the source
|
|
address selection algorithm.
|
|
0: disabled (default)
|
|
1: enabled
|
|
|
|
This will be enabled if at least one of
|
|
conf/{all,interface}/use_optimistic is set to 1, disabled otherwise.
|
|
|
|
stable_secret - IPv6 address
|
|
This IPv6 address will be used as a secret to generate IPv6
|
|
addresses for link-local addresses and autoconfigured
|
|
ones. All addresses generated after setting this secret will
|
|
be stable privacy ones by default. This can be changed via the
|
|
addrgenmode ip-link. conf/default/stable_secret is used as the
|
|
secret for the namespace, the interface specific ones can
|
|
overwrite that. Writes to conf/all/stable_secret are refused.
|
|
|
|
It is recommended to generate this secret during installation
|
|
of a system and keep it stable after that.
|
|
|
|
By default the stable secret is unset.
|
|
|
|
addr_gen_mode - INTEGER
|
|
Defines how link-local and autoconf addresses are generated.
|
|
|
|
0: generate address based on EUI64 (default)
|
|
1: do no generate a link-local address, use EUI64 for addresses generated
|
|
from autoconf
|
|
2: generate stable privacy addresses, using the secret from
|
|
stable_secret (RFC7217)
|
|
3: generate stable privacy addresses, using a random secret if unset
|
|
|
|
drop_unicast_in_l2_multicast - BOOLEAN
|
|
Drop any unicast IPv6 packets that are received in link-layer
|
|
multicast (or broadcast) frames.
|
|
|
|
By default this is turned off.
|
|
|
|
drop_unsolicited_na - BOOLEAN
|
|
Drop all unsolicited neighbor advertisements, for example if there's
|
|
a known good NA proxy on the network and such frames need not be used
|
|
(or in the case of 802.11, must not be used to prevent attacks.)
|
|
|
|
By default this is turned off.
|
|
|
|
enhanced_dad - BOOLEAN
|
|
Include a nonce option in the IPv6 neighbor solicitation messages used for
|
|
duplicate address detection per RFC7527. A received DAD NS will only signal
|
|
a duplicate address if the nonce is different. This avoids any false
|
|
detection of duplicates due to loopback of the NS messages that we send.
|
|
The nonce option will be sent on an interface unless both of
|
|
conf/{all,interface}/enhanced_dad are set to FALSE.
|
|
Default: TRUE
|
|
|
|
icmp/*:
|
|
ratelimit - INTEGER
|
|
Limit the maximal rates for sending ICMPv6 messages.
|
|
0 to disable any limiting,
|
|
otherwise the minimal space between responses in milliseconds.
|
|
Default: 1000
|
|
|
|
ratemask - list of comma separated ranges
|
|
For ICMPv6 message types matching the ranges in the ratemask, limit
|
|
the sending of the message according to ratelimit parameter.
|
|
|
|
The format used for both input and output is a comma separated
|
|
list of ranges (e.g. "0-127,129" for ICMPv6 message type 0 to 127 and
|
|
129). Writing to the file will clear all previous ranges of ICMPv6
|
|
message types and update the current list with the input.
|
|
|
|
Refer to: https://www.iana.org/assignments/icmpv6-parameters/icmpv6-parameters.xhtml
|
|
for numerical values of ICMPv6 message types, e.g. echo request is 128
|
|
and echo reply is 129.
|
|
|
|
Default: 0-1,3-127 (rate limit ICMPv6 errors except Packet Too Big)
|
|
|
|
echo_ignore_all - BOOLEAN
|
|
If set non-zero, then the kernel will ignore all ICMP ECHO
|
|
requests sent to it over the IPv6 protocol.
|
|
Default: 0
|
|
|
|
echo_ignore_multicast - BOOLEAN
|
|
If set non-zero, then the kernel will ignore all ICMP ECHO
|
|
requests sent to it over the IPv6 protocol via multicast.
|
|
Default: 0
|
|
|
|
echo_ignore_anycast - BOOLEAN
|
|
If set non-zero, then the kernel will ignore all ICMP ECHO
|
|
requests sent to it over the IPv6 protocol destined to anycast address.
|
|
Default: 0
|
|
|
|
xfrm6_gc_thresh - INTEGER
|
|
(Obsolete since linux-4.14)
|
|
The threshold at which we will start garbage collecting for IPv6
|
|
destination cache entries. At twice this value the system will
|
|
refuse new allocations.
|
|
|
|
|
|
IPv6 Update by:
|
|
Pekka Savola <pekkas@netcore.fi>
|
|
YOSHIFUJI Hideaki / USAGI Project <yoshfuji@linux-ipv6.org>
|
|
|
|
|
|
/proc/sys/net/bridge/* Variables:
|
|
|
|
bridge-nf-call-arptables - BOOLEAN
|
|
1 : pass bridged ARP traffic to arptables' FORWARD chain.
|
|
0 : disable this.
|
|
Default: 1
|
|
|
|
bridge-nf-call-iptables - BOOLEAN
|
|
1 : pass bridged IPv4 traffic to iptables' chains.
|
|
0 : disable this.
|
|
Default: 1
|
|
|
|
bridge-nf-call-ip6tables - BOOLEAN
|
|
1 : pass bridged IPv6 traffic to ip6tables' chains.
|
|
0 : disable this.
|
|
Default: 1
|
|
|
|
bridge-nf-filter-vlan-tagged - BOOLEAN
|
|
1 : pass bridged vlan-tagged ARP/IP/IPv6 traffic to {arp,ip,ip6}tables.
|
|
0 : disable this.
|
|
Default: 0
|
|
|
|
bridge-nf-filter-pppoe-tagged - BOOLEAN
|
|
1 : pass bridged pppoe-tagged IP/IPv6 traffic to {ip,ip6}tables.
|
|
0 : disable this.
|
|
Default: 0
|
|
|
|
bridge-nf-pass-vlan-input-dev - BOOLEAN
|
|
1: if bridge-nf-filter-vlan-tagged is enabled, try to find a vlan
|
|
interface on the bridge and set the netfilter input device to the vlan.
|
|
This allows use of e.g. "iptables -i br0.1" and makes the REDIRECT
|
|
target work with vlan-on-top-of-bridge interfaces. When no matching
|
|
vlan interface is found, or this switch is off, the input device is
|
|
set to the bridge interface.
|
|
0: disable bridge netfilter vlan interface lookup.
|
|
Default: 0
|
|
|
|
proc/sys/net/sctp/* Variables:
|
|
|
|
addip_enable - BOOLEAN
|
|
Enable or disable extension of Dynamic Address Reconfiguration
|
|
(ADD-IP) functionality specified in RFC5061. This extension provides
|
|
the ability to dynamically add and remove new addresses for the SCTP
|
|
associations.
|
|
|
|
1: Enable extension.
|
|
|
|
0: Disable extension.
|
|
|
|
Default: 0
|
|
|
|
pf_enable - INTEGER
|
|
Enable or disable pf (pf is short for potentially failed) state. A value
|
|
of pf_retrans > path_max_retrans also disables pf state. That is, one of
|
|
both pf_enable and pf_retrans > path_max_retrans can disable pf state.
|
|
Since pf_retrans and path_max_retrans can be changed by userspace
|
|
application, sometimes user expects to disable pf state by the value of
|
|
pf_retrans > path_max_retrans, but occasionally the value of pf_retrans
|
|
or path_max_retrans is changed by the user application, this pf state is
|
|
enabled. As such, it is necessary to add this to dynamically enable
|
|
and disable pf state. See:
|
|
https://datatracker.ietf.org/doc/draft-ietf-tsvwg-sctp-failover for
|
|
details.
|
|
|
|
1: Enable pf.
|
|
|
|
0: Disable pf.
|
|
|
|
Default: 1
|
|
|
|
addip_noauth_enable - BOOLEAN
|
|
Dynamic Address Reconfiguration (ADD-IP) requires the use of
|
|
authentication to protect the operations of adding or removing new
|
|
addresses. This requirement is mandated so that unauthorized hosts
|
|
would not be able to hijack associations. However, older
|
|
implementations may not have implemented this requirement while
|
|
allowing the ADD-IP extension. For reasons of interoperability,
|
|
we provide this variable to control the enforcement of the
|
|
authentication requirement.
|
|
|
|
1: Allow ADD-IP extension to be used without authentication. This
|
|
should only be set in a closed environment for interoperability
|
|
with older implementations.
|
|
|
|
0: Enforce the authentication requirement
|
|
|
|
Default: 0
|
|
|
|
auth_enable - BOOLEAN
|
|
Enable or disable Authenticated Chunks extension. This extension
|
|
provides the ability to send and receive authenticated chunks and is
|
|
required for secure operation of Dynamic Address Reconfiguration
|
|
(ADD-IP) extension.
|
|
|
|
1: Enable this extension.
|
|
0: Disable this extension.
|
|
|
|
Default: 0
|
|
|
|
prsctp_enable - BOOLEAN
|
|
Enable or disable the Partial Reliability extension (RFC3758) which
|
|
is used to notify peers that a given DATA should no longer be expected.
|
|
|
|
1: Enable extension
|
|
0: Disable
|
|
|
|
Default: 1
|
|
|
|
max_burst - INTEGER
|
|
The limit of the number of new packets that can be initially sent. It
|
|
controls how bursty the generated traffic can be.
|
|
|
|
Default: 4
|
|
|
|
association_max_retrans - INTEGER
|
|
Set the maximum number for retransmissions that an association can
|
|
attempt deciding that the remote end is unreachable. If this value
|
|
is exceeded, the association is terminated.
|
|
|
|
Default: 10
|
|
|
|
max_init_retransmits - INTEGER
|
|
The maximum number of retransmissions of INIT and COOKIE-ECHO chunks
|
|
that an association will attempt before declaring the destination
|
|
unreachable and terminating.
|
|
|
|
Default: 8
|
|
|
|
path_max_retrans - INTEGER
|
|
The maximum number of retransmissions that will be attempted on a given
|
|
path. Once this threshold is exceeded, the path is considered
|
|
unreachable, and new traffic will use a different path when the
|
|
association is multihomed.
|
|
|
|
Default: 5
|
|
|
|
pf_retrans - INTEGER
|
|
The number of retransmissions that will be attempted on a given path
|
|
before traffic is redirected to an alternate transport (should one
|
|
exist). Note this is distinct from path_max_retrans, as a path that
|
|
passes the pf_retrans threshold can still be used. Its only
|
|
deprioritized when a transmission path is selected by the stack. This
|
|
setting is primarily used to enable fast failover mechanisms without
|
|
having to reduce path_max_retrans to a very low value. See:
|
|
http://www.ietf.org/id/draft-nishida-tsvwg-sctp-failover-05.txt
|
|
for details. Note also that a value of pf_retrans > path_max_retrans
|
|
disables this feature. Since both pf_retrans and path_max_retrans can
|
|
be changed by userspace application, a variable pf_enable is used to
|
|
disable pf state.
|
|
|
|
Default: 0
|
|
|
|
rto_initial - INTEGER
|
|
The initial round trip timeout value in milliseconds that will be used
|
|
in calculating round trip times. This is the initial time interval
|
|
for retransmissions.
|
|
|
|
Default: 3000
|
|
|
|
rto_max - INTEGER
|
|
The maximum value (in milliseconds) of the round trip timeout. This
|
|
is the largest time interval that can elapse between retransmissions.
|
|
|
|
Default: 60000
|
|
|
|
rto_min - INTEGER
|
|
The minimum value (in milliseconds) of the round trip timeout. This
|
|
is the smallest time interval the can elapse between retransmissions.
|
|
|
|
Default: 1000
|
|
|
|
hb_interval - INTEGER
|
|
The interval (in milliseconds) between HEARTBEAT chunks. These chunks
|
|
are sent at the specified interval on idle paths to probe the state of
|
|
a given path between 2 associations.
|
|
|
|
Default: 30000
|
|
|
|
sack_timeout - INTEGER
|
|
The amount of time (in milliseconds) that the implementation will wait
|
|
to send a SACK.
|
|
|
|
Default: 200
|
|
|
|
valid_cookie_life - INTEGER
|
|
The default lifetime of the SCTP cookie (in milliseconds). The cookie
|
|
is used during association establishment.
|
|
|
|
Default: 60000
|
|
|
|
cookie_preserve_enable - BOOLEAN
|
|
Enable or disable the ability to extend the lifetime of the SCTP cookie
|
|
that is used during the establishment phase of SCTP association
|
|
|
|
1: Enable cookie lifetime extension.
|
|
0: Disable
|
|
|
|
Default: 1
|
|
|
|
cookie_hmac_alg - STRING
|
|
Select the hmac algorithm used when generating the cookie value sent by
|
|
a listening sctp socket to a connecting client in the INIT-ACK chunk.
|
|
Valid values are:
|
|
* md5
|
|
* sha1
|
|
* none
|
|
Ability to assign md5 or sha1 as the selected alg is predicated on the
|
|
configuration of those algorithms at build time (CONFIG_CRYPTO_MD5 and
|
|
CONFIG_CRYPTO_SHA1).
|
|
|
|
Default: Dependent on configuration. MD5 if available, else SHA1 if
|
|
available, else none.
|
|
|
|
rcvbuf_policy - INTEGER
|
|
Determines if the receive buffer is attributed to the socket or to
|
|
association. SCTP supports the capability to create multiple
|
|
associations on a single socket. When using this capability, it is
|
|
possible that a single stalled association that's buffering a lot
|
|
of data may block other associations from delivering their data by
|
|
consuming all of the receive buffer space. To work around this,
|
|
the rcvbuf_policy could be set to attribute the receiver buffer space
|
|
to each association instead of the socket. This prevents the described
|
|
blocking.
|
|
|
|
1: rcvbuf space is per association
|
|
0: rcvbuf space is per socket
|
|
|
|
Default: 0
|
|
|
|
sndbuf_policy - INTEGER
|
|
Similar to rcvbuf_policy above, this applies to send buffer space.
|
|
|
|
1: Send buffer is tracked per association
|
|
0: Send buffer is tracked per socket.
|
|
|
|
Default: 0
|
|
|
|
sctp_mem - vector of 3 INTEGERs: min, pressure, max
|
|
Number of pages allowed for queueing by all SCTP sockets.
|
|
|
|
min: Below this number of pages SCTP is not bothered about its
|
|
memory appetite. When amount of memory allocated by SCTP exceeds
|
|
this number, SCTP starts to moderate memory usage.
|
|
|
|
pressure: This value was introduced to follow format of tcp_mem.
|
|
|
|
max: Number of pages allowed for queueing by all SCTP sockets.
|
|
|
|
Default is calculated at boot time from amount of available memory.
|
|
|
|
sctp_rmem - vector of 3 INTEGERs: min, default, max
|
|
Only the first value ("min") is used, "default" and "max" are
|
|
ignored.
|
|
|
|
min: Minimal size of receive buffer used by SCTP socket.
|
|
It is guaranteed to each SCTP socket (but not association) even
|
|
under moderate memory pressure.
|
|
|
|
Default: 4K
|
|
|
|
sctp_wmem - vector of 3 INTEGERs: min, default, max
|
|
Currently this tunable has no effect.
|
|
|
|
addr_scope_policy - INTEGER
|
|
Control IPv4 address scoping - draft-stewart-tsvwg-sctp-ipv4-00
|
|
|
|
0 - Disable IPv4 address scoping
|
|
1 - Enable IPv4 address scoping
|
|
2 - Follow draft but allow IPv4 private addresses
|
|
3 - Follow draft but allow IPv4 link local addresses
|
|
|
|
Default: 1
|
|
|
|
|
|
/proc/sys/net/core/*
|
|
Please see: Documentation/sysctl/net.txt for descriptions of these entries.
|
|
|
|
|
|
/proc/sys/net/unix/*
|
|
max_dgram_qlen - INTEGER
|
|
The maximum length of dgram socket receive queue
|
|
|
|
Default: 10
|
|
|