mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 00:34:20 +08:00
ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
209 lines
5.2 KiB
C
209 lines
5.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* upd6408x - NEC Electronics 3-Dimensional Y/C separation driver
|
|
*
|
|
* 2003 by T.Adachi (tadachi@tadachi-net.com)
|
|
* 2003 by Takeru KOMORIYA <komoriya@paken.org>
|
|
* 2006 by Hans Verkuil <hverkuil@xs4all.nl>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/videodev2.h>
|
|
#include <linux/slab.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/i2c/upd64083.h>
|
|
|
|
MODULE_DESCRIPTION("uPD64083 driver");
|
|
MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static bool debug;
|
|
module_param(debug, bool, 0644);
|
|
|
|
MODULE_PARM_DESC(debug, "Debug level (0-1)");
|
|
|
|
|
|
enum {
|
|
R00 = 0, R01, R02, R03, R04,
|
|
R05, R06, R07, R08, R09,
|
|
R0A, R0B, R0C, R0D, R0E, R0F,
|
|
R10, R11, R12, R13, R14,
|
|
R15, R16,
|
|
TOT_REGS
|
|
};
|
|
|
|
struct upd64083_state {
|
|
struct v4l2_subdev sd;
|
|
u8 mode;
|
|
u8 ext_y_adc;
|
|
u8 regs[TOT_REGS];
|
|
};
|
|
|
|
static inline struct upd64083_state *to_state(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct upd64083_state, sd);
|
|
}
|
|
|
|
/* Initial values when used in combination with the
|
|
NEC upd64031a ghost reduction chip. */
|
|
static u8 upd64083_init[] = {
|
|
0x1f, 0x01, 0xa0, 0x2d, 0x29, /* we use EXCSS=0 */
|
|
0x36, 0xdd, 0x05, 0x56, 0x48,
|
|
0x00, 0x3a, 0xa0, 0x05, 0x08,
|
|
0x44, 0x60, 0x08, 0x52, 0xf8,
|
|
0x53, 0x60, 0x10
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------ */
|
|
|
|
static void upd64083_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
u8 buf[2];
|
|
|
|
buf[0] = reg;
|
|
buf[1] = val;
|
|
v4l2_dbg(1, debug, sd, "write reg: %02x val: %02x\n", reg, val);
|
|
if (i2c_master_send(client, buf, 2) != 2)
|
|
v4l2_err(sd, "I/O error write 0x%02x/0x%02x\n", reg, val);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------ */
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
static u8 upd64083_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
u8 buf[7];
|
|
|
|
if (reg >= sizeof(buf))
|
|
return 0xff;
|
|
i2c_master_recv(client, buf, sizeof(buf));
|
|
return buf[reg];
|
|
}
|
|
#endif
|
|
|
|
/* ------------------------------------------------------------------------ */
|
|
|
|
static int upd64083_s_routing(struct v4l2_subdev *sd,
|
|
u32 input, u32 output, u32 config)
|
|
{
|
|
struct upd64083_state *state = to_state(sd);
|
|
u8 r00, r02;
|
|
|
|
if (input > 7 || (input & 6) == 6)
|
|
return -EINVAL;
|
|
state->mode = (input & 3) << 6;
|
|
state->ext_y_adc = (input & UPD64083_EXT_Y_ADC) << 3;
|
|
r00 = (state->regs[R00] & ~(3 << 6)) | state->mode;
|
|
r02 = (state->regs[R02] & ~(1 << 5)) | state->ext_y_adc;
|
|
upd64083_write(sd, R00, r00);
|
|
upd64083_write(sd, R02, r02);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
static int upd64083_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
|
|
{
|
|
reg->val = upd64083_read(sd, reg->reg & 0xff);
|
|
reg->size = 1;
|
|
return 0;
|
|
}
|
|
|
|
static int upd64083_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
|
|
{
|
|
upd64083_write(sd, reg->reg & 0xff, reg->val & 0xff);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int upd64083_log_status(struct v4l2_subdev *sd)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
u8 buf[7];
|
|
|
|
i2c_master_recv(client, buf, 7);
|
|
v4l2_info(sd, "Status: SA00=%02x SA01=%02x SA02=%02x SA03=%02x "
|
|
"SA04=%02x SA05=%02x SA06=%02x\n",
|
|
buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
|
|
return 0;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static const struct v4l2_subdev_core_ops upd64083_core_ops = {
|
|
.log_status = upd64083_log_status,
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
.g_register = upd64083_g_register,
|
|
.s_register = upd64083_s_register,
|
|
#endif
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops upd64083_video_ops = {
|
|
.s_routing = upd64083_s_routing,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops upd64083_ops = {
|
|
.core = &upd64083_core_ops,
|
|
.video = &upd64083_video_ops,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------ */
|
|
|
|
/* i2c implementation */
|
|
|
|
static int upd64083_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct upd64083_state *state;
|
|
struct v4l2_subdev *sd;
|
|
int i;
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -EIO;
|
|
|
|
v4l_info(client, "chip found @ 0x%x (%s)\n",
|
|
client->addr << 1, client->adapter->name);
|
|
|
|
state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
return -ENOMEM;
|
|
sd = &state->sd;
|
|
v4l2_i2c_subdev_init(sd, client, &upd64083_ops);
|
|
/* Initially assume that a ghost reduction chip is present */
|
|
state->mode = 0; /* YCS mode */
|
|
state->ext_y_adc = (1 << 5);
|
|
memcpy(state->regs, upd64083_init, TOT_REGS);
|
|
for (i = 0; i < TOT_REGS; i++)
|
|
upd64083_write(sd, i, state->regs[i]);
|
|
return 0;
|
|
}
|
|
|
|
static void upd64083_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
|
|
v4l2_device_unregister_subdev(sd);
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static const struct i2c_device_id upd64083_id[] = {
|
|
{ "upd64083", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, upd64083_id);
|
|
|
|
static struct i2c_driver upd64083_driver = {
|
|
.driver = {
|
|
.name = "upd64083",
|
|
},
|
|
.probe = upd64083_probe,
|
|
.remove = upd64083_remove,
|
|
.id_table = upd64083_id,
|
|
};
|
|
|
|
module_i2c_driver(upd64083_driver);
|