linux/arch/loongarch/kvm/timer.c
Bibo Mao f66228053e LoongArch: KVM: Do not restart SW timer when it is expired
LoongArch VCPUs have their own separate HW timers. SW timer is to wake
up blocked vcpu thread, rather than HW timer emulation. When blocking
vcpu scheduled out, SW timer is used to wakeup blocked vcpu thread and
injects timer interrupt. It does not care about whether guest timer is
in period mode or oneshot mode, and SW timer needs not to be restarted
since vcpu has been woken.

This patch does not restart SW timer when it is expired.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-03-06 09:12:13 +08:00

198 lines
5.1 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2020-2023 Loongson Technology Corporation Limited
*/
#include <linux/kvm_host.h>
#include <asm/kvm_csr.h>
#include <asm/kvm_vcpu.h>
/*
* ktime_to_tick() - Scale ktime_t to timer tick value.
*/
static inline u64 ktime_to_tick(struct kvm_vcpu *vcpu, ktime_t now)
{
u64 delta;
delta = ktime_to_ns(now);
return div_u64(delta * vcpu->arch.timer_mhz, MNSEC_PER_SEC);
}
static inline u64 tick_to_ns(struct kvm_vcpu *vcpu, u64 tick)
{
return div_u64(tick * MNSEC_PER_SEC, vcpu->arch.timer_mhz);
}
/* Low level hrtimer wake routine */
enum hrtimer_restart kvm_swtimer_wakeup(struct hrtimer *timer)
{
struct kvm_vcpu *vcpu;
vcpu = container_of(timer, struct kvm_vcpu, arch.swtimer);
kvm_queue_irq(vcpu, INT_TI);
rcuwait_wake_up(&vcpu->wait);
return HRTIMER_NORESTART;
}
/*
* Initialise the timer to the specified frequency, zero it
*/
void kvm_init_timer(struct kvm_vcpu *vcpu, unsigned long timer_hz)
{
vcpu->arch.timer_mhz = timer_hz >> 20;
/* Starting at 0 */
kvm_write_sw_gcsr(vcpu->arch.csr, LOONGARCH_CSR_TVAL, 0);
}
/*
* Restore soft timer state from saved context.
*/
void kvm_restore_timer(struct kvm_vcpu *vcpu)
{
unsigned long cfg, estat;
unsigned long ticks, delta, period;
ktime_t expire, now;
struct loongarch_csrs *csr = vcpu->arch.csr;
/*
* Set guest stable timer cfg csr
* Disable timer before restore estat CSR register, avoid to
* get invalid timer interrupt for old timer cfg
*/
cfg = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TCFG);
write_gcsr_timercfg(0);
kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_ESTAT);
kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_TCFG);
if (!(cfg & CSR_TCFG_EN)) {
/* Guest timer is disabled, just restore timer registers */
kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_TVAL);
return;
}
/*
* Freeze the soft-timer and sync the guest stable timer with it.
*/
if (kvm_vcpu_is_blocking(vcpu))
hrtimer_cancel(&vcpu->arch.swtimer);
/*
* From LoongArch Reference Manual Volume 1 Chapter 7.6.2
* If oneshot timer is fired, CSR TVAL will be -1, there are two
* conditions:
* 1) timer is fired during exiting to host
* 2) timer is fired and vm is doing timer irq, and then exiting to
* host. Host should not inject timer irq to avoid spurious
* timer interrupt again
*/
ticks = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TVAL);
estat = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_ESTAT);
if (!(cfg & CSR_TCFG_PERIOD) && (ticks > cfg)) {
/*
* Writing 0 to LOONGARCH_CSR_TVAL will inject timer irq
* and set CSR TVAL with -1
*/
write_gcsr_timertick(0);
/*
* Writing CSR_TINTCLR_TI to LOONGARCH_CSR_TINTCLR will clear
* timer interrupt, and CSR TVAL keeps unchanged with -1, it
* avoids spurious timer interrupt
*/
if (!(estat & CPU_TIMER))
gcsr_write(CSR_TINTCLR_TI, LOONGARCH_CSR_TINTCLR);
return;
}
/*
* Set remainder tick value if not expired
*/
delta = 0;
now = ktime_get();
expire = vcpu->arch.expire;
if (ktime_before(now, expire))
delta = ktime_to_tick(vcpu, ktime_sub(expire, now));
else if (cfg & CSR_TCFG_PERIOD) {
period = cfg & CSR_TCFG_VAL;
delta = ktime_to_tick(vcpu, ktime_sub(now, expire));
delta = period - (delta % period);
/*
* Inject timer here though sw timer should inject timer
* interrupt async already, since sw timer may be cancelled
* during injecting intr async
*/
kvm_queue_irq(vcpu, INT_TI);
}
write_gcsr_timertick(delta);
}
/*
* Save guest timer state and switch to software emulation of guest
* timer. The hard timer must already be in use, so preemption should be
* disabled.
*/
static void _kvm_save_timer(struct kvm_vcpu *vcpu)
{
unsigned long ticks, delta, cfg;
ktime_t expire;
struct loongarch_csrs *csr = vcpu->arch.csr;
cfg = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TCFG);
ticks = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TVAL);
/*
* From LoongArch Reference Manual Volume 1 Chapter 7.6.2
* If period timer is fired, CSR TVAL will be reloaded from CSR TCFG
* If oneshot timer is fired, CSR TVAL will be -1
* Here judge one-shot timer fired by checking whether TVAL is larger
* than TCFG
*/
if (ticks < cfg)
delta = tick_to_ns(vcpu, ticks);
else
delta = 0;
expire = ktime_add_ns(ktime_get(), delta);
vcpu->arch.expire = expire;
if (kvm_vcpu_is_blocking(vcpu)) {
/*
* HRTIMER_MODE_PINNED is suggested since vcpu may run in
* the same physical cpu in next time
*/
hrtimer_start(&vcpu->arch.swtimer, expire, HRTIMER_MODE_ABS_PINNED);
}
}
/*
* Save guest timer state and switch to soft guest timer if hard timer was in
* use.
*/
void kvm_save_timer(struct kvm_vcpu *vcpu)
{
struct loongarch_csrs *csr = vcpu->arch.csr;
preempt_disable();
/* Save hard timer state */
kvm_save_hw_gcsr(csr, LOONGARCH_CSR_TCFG);
kvm_save_hw_gcsr(csr, LOONGARCH_CSR_TVAL);
if (kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TCFG) & CSR_TCFG_EN)
_kvm_save_timer(vcpu);
/* Save timer-related state to vCPU context */
kvm_save_hw_gcsr(csr, LOONGARCH_CSR_ESTAT);
preempt_enable();
}
void kvm_reset_timer(struct kvm_vcpu *vcpu)
{
write_gcsr_timercfg(0);
kvm_write_sw_gcsr(vcpu->arch.csr, LOONGARCH_CSR_TCFG, 0);
hrtimer_cancel(&vcpu->arch.swtimer);
}