linux/samples/bpf
Brenden Blanco 86af8b4191 Add sample for adding simple drop program to link
Add a sample program that only drops packets at the BPF_PROG_TYPE_XDP_RX
hook of a link. With the drop-only program, observed single core rate is
~20Mpps.

Other tests were run, for instance without the dropcnt increment or
without reading from the packet header, the packet rate was mostly
unchanged.

$ perf record -a samples/bpf/xdp1 $(</sys/class/net/eth0/ifindex)
proto 17:   20403027 drops/s

./pktgen_sample03_burst_single_flow.sh -i $DEV -d $IP -m $MAC -t 4
Running... ctrl^C to stop
Device: eth4@0
Result: OK: 11791017(c11788327+d2689) usec, 59622913 (60byte,0frags)
  5056638pps 2427Mb/sec (2427186240bps) errors: 0
Device: eth4@1
Result: OK: 11791012(c11787906+d3106) usec, 60526944 (60byte,0frags)
  5133311pps 2463Mb/sec (2463989280bps) errors: 0
Device: eth4@2
Result: OK: 11791019(c11788249+d2769) usec, 59868091 (60byte,0frags)
  5077431pps 2437Mb/sec (2437166880bps) errors: 0
Device: eth4@3
Result: OK: 11795039(c11792403+d2636) usec, 59483181 (60byte,0frags)
  5043067pps 2420Mb/sec (2420672160bps) errors: 0

perf report --no-children:
 26.05%  ksoftirqd/0  [mlx4_en]         [k] mlx4_en_process_rx_cq
 17.84%  ksoftirqd/0  [mlx4_en]         [k] mlx4_en_alloc_frags
  5.52%  ksoftirqd/0  [mlx4_en]         [k] mlx4_en_free_frag
  4.90%  swapper      [kernel.vmlinux]  [k] poll_idle
  4.14%  ksoftirqd/0  [kernel.vmlinux]  [k] get_page_from_freelist
  2.78%  ksoftirqd/0  [kernel.vmlinux]  [k] __free_pages_ok
  2.57%  ksoftirqd/0  [kernel.vmlinux]  [k] bpf_map_lookup_elem
  2.51%  swapper      [mlx4_en]         [k] mlx4_en_process_rx_cq
  1.94%  ksoftirqd/0  [kernel.vmlinux]  [k] percpu_array_map_lookup_elem
  1.45%  swapper      [mlx4_en]         [k] mlx4_en_alloc_frags
  1.35%  ksoftirqd/0  [kernel.vmlinux]  [k] free_one_page
  1.33%  swapper      [kernel.vmlinux]  [k] intel_idle
  1.04%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c5c5
  0.96%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c58d
  0.93%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c6ee
  0.92%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c6b9
  0.89%  ksoftirqd/0  [kernel.vmlinux]  [k] __alloc_pages_nodemask
  0.83%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c686
  0.83%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c5d5
  0.78%  ksoftirqd/0  [mlx4_en]         [k] mlx4_alloc_pages.isra.23
  0.77%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c5b4
  0.77%  ksoftirqd/0  [kernel.vmlinux]  [k] net_rx_action

machine specs:
 receiver - Intel E5-1630 v3 @ 3.70GHz
 sender - Intel E5645 @ 2.40GHz
 Mellanox ConnectX-3 @40G

Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 21:46:32 -07:00
..
bpf_helpers.h cgroup: bpf: Add an example to do cgroup checking in BPF 2016-07-01 16:32:13 -04:00
bpf_load.c Add sample for adding simple drop program to link 2016-07-19 21:46:32 -07:00
bpf_load.h samples/bpf: move ksym_search() into library 2016-03-08 15:28:32 -05:00
fds_example.c samples/bpf: add map_flags to bpf loader 2016-03-08 15:28:32 -05:00
lathist_kern.c bpf: BPF based latency tracing 2015-06-23 06:09:58 -07:00
lathist_user.c bpf: BPF based latency tracing 2015-06-23 06:09:58 -07:00
libbpf.c samples/bpf: add map_flags to bpf loader 2016-03-08 15:28:32 -05:00
libbpf.h samples/bpf: add map_flags to bpf loader 2016-03-08 15:28:32 -05:00
Makefile Add sample for adding simple drop program to link 2016-07-19 21:46:32 -07:00
map_perf_test_kern.c samples/bpf: add map performance test 2016-03-08 23:22:03 -05:00
map_perf_test_user.c samples/bpf: Fix build breakage with map_perf_test_user.c 2016-04-06 16:01:28 -04:00
offwaketime_kern.c bpf, samples: don't zero data when not needed 2016-04-14 21:40:42 -04:00
offwaketime_user.c samples/bpf: move ksym_search() into library 2016-03-08 15:28:32 -05:00
parse_ldabs.c samples/bpf: add 'pointer to packet' tests 2016-05-06 16:01:54 -04:00
parse_simple.c samples/bpf: add 'pointer to packet' tests 2016-05-06 16:01:54 -04:00
parse_varlen.c samples/bpf: add 'pointer to packet' tests 2016-05-06 16:01:54 -04:00
README.rst samples/bpf: like LLC also verify and allow redefining CLANG command 2016-04-29 14:26:08 -04:00
sock_example.c samples/bpf: add map_flags to bpf loader 2016-03-08 15:28:32 -05:00
sockex1_kern.c samples: bpf: add skb->field examples and tests 2015-03-15 22:02:28 -04:00
sockex1_user.c samples: bpf: add skb->field examples and tests 2015-03-15 22:02:28 -04:00
sockex2_kern.c samples: bpf: add skb->field examples and tests 2015-03-15 22:02:28 -04:00
sockex2_user.c samples/bpf: set max locked memory to ulimited 2016-06-25 12:03:46 -04:00
sockex3_kern.c bpf: allow programs to write to certain skb fields 2015-06-07 02:01:33 -07:00
sockex3_user.c samples/bpf: set max locked memory to ulimited 2016-06-25 12:03:46 -04:00
spintest_kern.c samples/bpf: Enable powerpc support 2016-04-06 16:01:29 -04:00
spintest_user.c samples/bpf: add bpf map stress test 2016-03-08 23:22:02 -05:00
tcbpf1_kern.c bpf: add bpf_redirect() helper 2015-09-17 21:09:07 -07:00
test_cgrp2_array_pin.c cgroup: bpf: Add an example to do cgroup checking in BPF 2016-07-01 16:32:13 -04:00
test_cgrp2_tc_kern.c cgroup: bpf: Add an example to do cgroup checking in BPF 2016-07-01 16:32:13 -04:00
test_cgrp2_tc.sh cgroup: bpf: Add an example to do cgroup checking in BPF 2016-07-01 16:32:13 -04:00
test_cls_bpf.sh samples/bpf: add 'pointer to packet' tests 2016-05-06 16:01:54 -04:00
test_maps.c samples/bpf: test both pre-alloc and normal maps 2016-03-08 15:28:32 -05:00
test_overhead_kprobe_kern.c samples/bpf: add tracepoint vs kprobe performance tests 2016-04-07 21:04:27 -04:00
test_overhead_tp_kern.c samples/bpf: add tracepoint vs kprobe performance tests 2016-04-07 21:04:27 -04:00
test_overhead_user.c samples/bpf: add tracepoint vs kprobe performance tests 2016-04-07 21:04:27 -04:00
test_verifier.c samples/bpf: add verifier tests 2016-05-06 16:01:54 -04:00
trace_output_kern.c samples/bpf: fix trace_output example 2016-04-28 17:29:45 -04:00
trace_output_user.c samples: bpf: add bpf_perf_event_output example 2015-10-22 06:42:15 -07:00
tracex1_kern.c bpf, samples: don't zero data when not needed 2016-04-14 21:40:42 -04:00
tracex1_user.c samples/bpf: Add simple non-portable kprobe filter example 2015-04-02 13:25:50 +02:00
tracex2_kern.c bpf, samples: don't zero data when not needed 2016-04-14 21:40:42 -04:00
tracex2_user.c samples/bpf: update tracex[23] examples to use per-cpu maps 2016-02-06 03:34:36 -05:00
tracex3_kern.c samples/bpf: update tracex[23] examples to use per-cpu maps 2016-02-06 03:34:36 -05:00
tracex3_user.c samples/bpf: update tracex[23] examples to use per-cpu maps 2016-02-06 03:34:36 -05:00
tracex4_kern.c samples/bpf: Enable powerpc support 2016-04-06 16:01:29 -04:00
tracex4_user.c samples/bpf: Add kmem_alloc()/free() tracker tool 2015-04-02 13:25:51 +02:00
tracex5_kern.c bpf, samples: don't zero data when not needed 2016-04-14 21:40:42 -04:00
tracex5_user.c samples/bpf: bpf_tail_call example for tracing 2015-05-21 17:07:59 -04:00
tracex6_kern.c bpf: fix build warnings and add function read_trace_pipe() 2015-08-12 16:39:12 -07:00
tracex6_user.c bpf: fix build warnings and add function read_trace_pipe() 2015-08-12 16:39:12 -07:00
xdp1_kern.c Add sample for adding simple drop program to link 2016-07-19 21:46:32 -07:00
xdp1_user.c Add sample for adding simple drop program to link 2016-07-19 21:46:32 -07:00

eBPF sample programs
====================

This directory contains a mini eBPF library, test stubs, verifier
test-suite and examples for using eBPF.

Build dependencies
==================

Compiling requires having installed:
 * clang >= version 3.4.0
 * llvm >= version 3.7.1

Note that LLVM's tool 'llc' must support target 'bpf', list version
and supported targets with command: ``llc --version``

Kernel headers
--------------

There are usually dependencies to header files of the current kernel.
To avoid installing devel kernel headers system wide, as a normal
user, simply call::

 make headers_install

This will creates a local "usr/include" directory in the git/build top
level directory, that the make system automatically pickup first.

Compiling
=========

For building the BPF samples, issue the below command from the kernel
top level directory::

 make samples/bpf/

Do notice the "/" slash after the directory name.

It is also possible to call make from this directory.  This will just
hide the the invocation of make as above with the appended "/".

Manually compiling LLVM with 'bpf' support
------------------------------------------

Since version 3.7.0, LLVM adds a proper LLVM backend target for the
BPF bytecode architecture.

By default llvm will build all non-experimental backends including bpf.
To generate a smaller llc binary one can use::

 -DLLVM_TARGETS_TO_BUILD="BPF"

Quick sniplet for manually compiling LLVM and clang
(build dependencies are cmake and gcc-c++)::

 $ git clone http://llvm.org/git/llvm.git
 $ cd llvm/tools
 $ git clone --depth 1 http://llvm.org/git/clang.git
 $ cd ..; mkdir build; cd build
 $ cmake .. -DLLVM_TARGETS_TO_BUILD="BPF;X86"
 $ make -j $(getconf _NPROCESSORS_ONLN)

It is also possible to point make to the newly compiled 'llc' or
'clang' command via redefining LLC or CLANG on the make command line::

 make samples/bpf/ LLC=~/git/llvm/build/bin/llc CLANG=~/git/llvm/build/bin/clang