mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 16:54:20 +08:00
2c2a8c531e
Remove broken URLs (www.scyld.com) from network drivers' logging output. URLs in comments and other strings are left intact. Signed-off-by: Markus Dahms <dahms@fh-brandenburg.de> Acked-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Alan Cox <alan@redhat.com> igned-off-by: Adrian Bunk <bunk@stusta.de>
1613 lines
45 KiB
C
1613 lines
45 KiB
C
/* epic100.c: A SMC 83c170 EPIC/100 Fast Ethernet driver for Linux. */
|
|
/*
|
|
Written/copyright 1997-2001 by Donald Becker.
|
|
|
|
This software may be used and distributed according to the terms of
|
|
the GNU General Public License (GPL), incorporated herein by reference.
|
|
Drivers based on or derived from this code fall under the GPL and must
|
|
retain the authorship, copyright and license notice. This file is not
|
|
a complete program and may only be used when the entire operating
|
|
system is licensed under the GPL.
|
|
|
|
This driver is for the SMC83c170/175 "EPIC" series, as used on the
|
|
SMC EtherPower II 9432 PCI adapter, and several CardBus cards.
|
|
|
|
The author may be reached as becker@scyld.com, or C/O
|
|
Scyld Computing Corporation
|
|
410 Severn Ave., Suite 210
|
|
Annapolis MD 21403
|
|
|
|
Information and updates available at
|
|
http://www.scyld.com/network/epic100.html
|
|
[this link no longer provides anything useful -jgarzik]
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
*/
|
|
|
|
#define DRV_NAME "epic100"
|
|
#define DRV_VERSION "2.1"
|
|
#define DRV_RELDATE "Sept 11, 2006"
|
|
|
|
/* The user-configurable values.
|
|
These may be modified when a driver module is loaded.*/
|
|
|
|
static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
|
|
|
|
/* Used to pass the full-duplex flag, etc. */
|
|
#define MAX_UNITS 8 /* More are supported, limit only on options */
|
|
static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
|
|
static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
|
|
|
|
/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
|
|
Setting to > 1518 effectively disables this feature. */
|
|
static int rx_copybreak;
|
|
|
|
/* Operational parameters that are set at compile time. */
|
|
|
|
/* Keep the ring sizes a power of two for operational efficiency.
|
|
The compiler will convert <unsigned>'%'<2^N> into a bit mask.
|
|
Making the Tx ring too large decreases the effectiveness of channel
|
|
bonding and packet priority.
|
|
There are no ill effects from too-large receive rings. */
|
|
#define TX_RING_SIZE 256
|
|
#define TX_QUEUE_LEN 240 /* Limit ring entries actually used. */
|
|
#define RX_RING_SIZE 256
|
|
#define TX_TOTAL_SIZE TX_RING_SIZE*sizeof(struct epic_tx_desc)
|
|
#define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct epic_rx_desc)
|
|
|
|
/* Operational parameters that usually are not changed. */
|
|
/* Time in jiffies before concluding the transmitter is hung. */
|
|
#define TX_TIMEOUT (2*HZ)
|
|
|
|
#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
|
|
|
|
/* Bytes transferred to chip before transmission starts. */
|
|
/* Initial threshold, increased on underflow, rounded down to 4 byte units. */
|
|
#define TX_FIFO_THRESH 256
|
|
#define RX_FIFO_THRESH 1 /* 0-3, 0==32, 64,96, or 3==128 bytes */
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/init.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/bitops.h>
|
|
#include <asm/io.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
/* These identify the driver base version and may not be removed. */
|
|
static char version[] __devinitdata =
|
|
DRV_NAME ".c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>\n";
|
|
static char version2[] __devinitdata =
|
|
" (unofficial 2.4.x kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
|
|
|
|
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
|
|
MODULE_DESCRIPTION("SMC 83c170 EPIC series Ethernet driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param(debug, int, 0);
|
|
module_param(rx_copybreak, int, 0);
|
|
module_param_array(options, int, NULL, 0);
|
|
module_param_array(full_duplex, int, NULL, 0);
|
|
MODULE_PARM_DESC(debug, "EPIC/100 debug level (0-5)");
|
|
MODULE_PARM_DESC(options, "EPIC/100: Bits 0-3: media type, bit 4: full duplex");
|
|
MODULE_PARM_DESC(rx_copybreak, "EPIC/100 copy breakpoint for copy-only-tiny-frames");
|
|
MODULE_PARM_DESC(full_duplex, "EPIC/100 full duplex setting(s) (1)");
|
|
|
|
/*
|
|
Theory of Operation
|
|
|
|
I. Board Compatibility
|
|
|
|
This device driver is designed for the SMC "EPIC/100", the SMC
|
|
single-chip Ethernet controllers for PCI. This chip is used on
|
|
the SMC EtherPower II boards.
|
|
|
|
II. Board-specific settings
|
|
|
|
PCI bus devices are configured by the system at boot time, so no jumpers
|
|
need to be set on the board. The system BIOS will assign the
|
|
PCI INTA signal to a (preferably otherwise unused) system IRQ line.
|
|
Note: Kernel versions earlier than 1.3.73 do not support shared PCI
|
|
interrupt lines.
|
|
|
|
III. Driver operation
|
|
|
|
IIIa. Ring buffers
|
|
|
|
IVb. References
|
|
|
|
http://www.smsc.com/main/datasheets/83c171.pdf
|
|
http://www.smsc.com/main/datasheets/83c175.pdf
|
|
http://scyld.com/expert/NWay.html
|
|
http://www.national.com/pf/DP/DP83840A.html
|
|
|
|
IVc. Errata
|
|
|
|
*/
|
|
|
|
|
|
enum chip_capability_flags { MII_PWRDWN=1, TYPE2_INTR=2, NO_MII=4 };
|
|
|
|
#define EPIC_TOTAL_SIZE 0x100
|
|
#define USE_IO_OPS 1
|
|
|
|
typedef enum {
|
|
SMSC_83C170_0,
|
|
SMSC_83C170,
|
|
SMSC_83C175,
|
|
} chip_t;
|
|
|
|
|
|
struct epic_chip_info {
|
|
const char *name;
|
|
int drv_flags; /* Driver use, intended as capability flags. */
|
|
};
|
|
|
|
|
|
/* indexed by chip_t */
|
|
static const struct epic_chip_info pci_id_tbl[] = {
|
|
{ "SMSC EPIC/100 83c170", TYPE2_INTR | NO_MII | MII_PWRDWN },
|
|
{ "SMSC EPIC/100 83c170", TYPE2_INTR },
|
|
{ "SMSC EPIC/C 83c175", TYPE2_INTR | MII_PWRDWN },
|
|
};
|
|
|
|
|
|
static struct pci_device_id epic_pci_tbl[] = {
|
|
{ 0x10B8, 0x0005, 0x1092, 0x0AB4, 0, 0, SMSC_83C170_0 },
|
|
{ 0x10B8, 0x0005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SMSC_83C170 },
|
|
{ 0x10B8, 0x0006, PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, SMSC_83C175 },
|
|
{ 0,}
|
|
};
|
|
MODULE_DEVICE_TABLE (pci, epic_pci_tbl);
|
|
|
|
|
|
#ifndef USE_IO_OPS
|
|
#undef inb
|
|
#undef inw
|
|
#undef inl
|
|
#undef outb
|
|
#undef outw
|
|
#undef outl
|
|
#define inb readb
|
|
#define inw readw
|
|
#define inl readl
|
|
#define outb writeb
|
|
#define outw writew
|
|
#define outl writel
|
|
#endif
|
|
|
|
/* Offsets to registers, using the (ugh) SMC names. */
|
|
enum epic_registers {
|
|
COMMAND=0, INTSTAT=4, INTMASK=8, GENCTL=0x0C, NVCTL=0x10, EECTL=0x14,
|
|
PCIBurstCnt=0x18,
|
|
TEST1=0x1C, CRCCNT=0x20, ALICNT=0x24, MPCNT=0x28, /* Rx error counters. */
|
|
MIICtrl=0x30, MIIData=0x34, MIICfg=0x38,
|
|
LAN0=64, /* MAC address. */
|
|
MC0=80, /* Multicast filter table. */
|
|
RxCtrl=96, TxCtrl=112, TxSTAT=0x74,
|
|
PRxCDAR=0x84, RxSTAT=0xA4, EarlyRx=0xB0, PTxCDAR=0xC4, TxThresh=0xDC,
|
|
};
|
|
|
|
/* Interrupt register bits, using my own meaningful names. */
|
|
enum IntrStatus {
|
|
TxIdle=0x40000, RxIdle=0x20000, IntrSummary=0x010000,
|
|
PCIBusErr170=0x7000, PCIBusErr175=0x1000, PhyEvent175=0x8000,
|
|
RxStarted=0x0800, RxEarlyWarn=0x0400, CntFull=0x0200, TxUnderrun=0x0100,
|
|
TxEmpty=0x0080, TxDone=0x0020, RxError=0x0010,
|
|
RxOverflow=0x0008, RxFull=0x0004, RxHeader=0x0002, RxDone=0x0001,
|
|
};
|
|
enum CommandBits {
|
|
StopRx=1, StartRx=2, TxQueued=4, RxQueued=8,
|
|
StopTxDMA=0x20, StopRxDMA=0x40, RestartTx=0x80,
|
|
};
|
|
|
|
#define EpicRemoved 0xffffffff /* Chip failed or removed (CardBus) */
|
|
|
|
#define EpicNapiEvent (TxEmpty | TxDone | \
|
|
RxDone | RxStarted | RxEarlyWarn | RxOverflow | RxFull)
|
|
#define EpicNormalEvent (0x0000ffff & ~EpicNapiEvent)
|
|
|
|
static const u16 media2miictl[16] = {
|
|
0, 0x0C00, 0x0C00, 0x2000, 0x0100, 0x2100, 0, 0,
|
|
0, 0, 0, 0, 0, 0, 0, 0 };
|
|
|
|
/* The EPIC100 Rx and Tx buffer descriptors. */
|
|
|
|
struct epic_tx_desc {
|
|
u32 txstatus;
|
|
u32 bufaddr;
|
|
u32 buflength;
|
|
u32 next;
|
|
};
|
|
|
|
struct epic_rx_desc {
|
|
u32 rxstatus;
|
|
u32 bufaddr;
|
|
u32 buflength;
|
|
u32 next;
|
|
};
|
|
|
|
enum desc_status_bits {
|
|
DescOwn=0x8000,
|
|
};
|
|
|
|
#define PRIV_ALIGN 15 /* Required alignment mask */
|
|
struct epic_private {
|
|
struct epic_rx_desc *rx_ring;
|
|
struct epic_tx_desc *tx_ring;
|
|
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
|
|
struct sk_buff* tx_skbuff[TX_RING_SIZE];
|
|
/* The addresses of receive-in-place skbuffs. */
|
|
struct sk_buff* rx_skbuff[RX_RING_SIZE];
|
|
|
|
dma_addr_t tx_ring_dma;
|
|
dma_addr_t rx_ring_dma;
|
|
|
|
/* Ring pointers. */
|
|
spinlock_t lock; /* Group with Tx control cache line. */
|
|
spinlock_t napi_lock;
|
|
unsigned int reschedule_in_poll;
|
|
unsigned int cur_tx, dirty_tx;
|
|
|
|
unsigned int cur_rx, dirty_rx;
|
|
u32 irq_mask;
|
|
unsigned int rx_buf_sz; /* Based on MTU+slack. */
|
|
|
|
struct pci_dev *pci_dev; /* PCI bus location. */
|
|
int chip_id, chip_flags;
|
|
|
|
struct net_device_stats stats;
|
|
struct timer_list timer; /* Media selection timer. */
|
|
int tx_threshold;
|
|
unsigned char mc_filter[8];
|
|
signed char phys[4]; /* MII device addresses. */
|
|
u16 advertising; /* NWay media advertisement */
|
|
int mii_phy_cnt;
|
|
struct mii_if_info mii;
|
|
unsigned int tx_full:1; /* The Tx queue is full. */
|
|
unsigned int default_port:4; /* Last dev->if_port value. */
|
|
};
|
|
|
|
static int epic_open(struct net_device *dev);
|
|
static int read_eeprom(long ioaddr, int location);
|
|
static int mdio_read(struct net_device *dev, int phy_id, int location);
|
|
static void mdio_write(struct net_device *dev, int phy_id, int loc, int val);
|
|
static void epic_restart(struct net_device *dev);
|
|
static void epic_timer(unsigned long data);
|
|
static void epic_tx_timeout(struct net_device *dev);
|
|
static void epic_init_ring(struct net_device *dev);
|
|
static int epic_start_xmit(struct sk_buff *skb, struct net_device *dev);
|
|
static int epic_rx(struct net_device *dev, int budget);
|
|
static int epic_poll(struct net_device *dev, int *budget);
|
|
static irqreturn_t epic_interrupt(int irq, void *dev_instance);
|
|
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
|
static const struct ethtool_ops netdev_ethtool_ops;
|
|
static int epic_close(struct net_device *dev);
|
|
static struct net_device_stats *epic_get_stats(struct net_device *dev);
|
|
static void set_rx_mode(struct net_device *dev);
|
|
|
|
|
|
|
|
static int __devinit epic_init_one (struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
static int card_idx = -1;
|
|
long ioaddr;
|
|
int chip_idx = (int) ent->driver_data;
|
|
int irq;
|
|
struct net_device *dev;
|
|
struct epic_private *ep;
|
|
int i, ret, option = 0, duplex = 0;
|
|
void *ring_space;
|
|
dma_addr_t ring_dma;
|
|
|
|
/* when built into the kernel, we only print version if device is found */
|
|
#ifndef MODULE
|
|
static int printed_version;
|
|
if (!printed_version++)
|
|
printk (KERN_INFO "%s" KERN_INFO "%s",
|
|
version, version2);
|
|
#endif
|
|
|
|
card_idx++;
|
|
|
|
ret = pci_enable_device(pdev);
|
|
if (ret)
|
|
goto out;
|
|
irq = pdev->irq;
|
|
|
|
if (pci_resource_len(pdev, 0) < EPIC_TOTAL_SIZE) {
|
|
dev_err(&pdev->dev, "no PCI region space\n");
|
|
ret = -ENODEV;
|
|
goto err_out_disable;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
ret = pci_request_regions(pdev, DRV_NAME);
|
|
if (ret < 0)
|
|
goto err_out_disable;
|
|
|
|
ret = -ENOMEM;
|
|
|
|
dev = alloc_etherdev(sizeof (*ep));
|
|
if (!dev) {
|
|
dev_err(&pdev->dev, "no memory for eth device\n");
|
|
goto err_out_free_res;
|
|
}
|
|
SET_MODULE_OWNER(dev);
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
#ifdef USE_IO_OPS
|
|
ioaddr = pci_resource_start (pdev, 0);
|
|
#else
|
|
ioaddr = pci_resource_start (pdev, 1);
|
|
ioaddr = (long) ioremap (ioaddr, pci_resource_len (pdev, 1));
|
|
if (!ioaddr) {
|
|
dev_err(&pdev->dev, "ioremap failed\n");
|
|
goto err_out_free_netdev;
|
|
}
|
|
#endif
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
ep = dev->priv;
|
|
ep->mii.dev = dev;
|
|
ep->mii.mdio_read = mdio_read;
|
|
ep->mii.mdio_write = mdio_write;
|
|
ep->mii.phy_id_mask = 0x1f;
|
|
ep->mii.reg_num_mask = 0x1f;
|
|
|
|
ring_space = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &ring_dma);
|
|
if (!ring_space)
|
|
goto err_out_iounmap;
|
|
ep->tx_ring = (struct epic_tx_desc *)ring_space;
|
|
ep->tx_ring_dma = ring_dma;
|
|
|
|
ring_space = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &ring_dma);
|
|
if (!ring_space)
|
|
goto err_out_unmap_tx;
|
|
ep->rx_ring = (struct epic_rx_desc *)ring_space;
|
|
ep->rx_ring_dma = ring_dma;
|
|
|
|
if (dev->mem_start) {
|
|
option = dev->mem_start;
|
|
duplex = (dev->mem_start & 16) ? 1 : 0;
|
|
} else if (card_idx >= 0 && card_idx < MAX_UNITS) {
|
|
if (options[card_idx] >= 0)
|
|
option = options[card_idx];
|
|
if (full_duplex[card_idx] >= 0)
|
|
duplex = full_duplex[card_idx];
|
|
}
|
|
|
|
dev->base_addr = ioaddr;
|
|
dev->irq = irq;
|
|
|
|
spin_lock_init(&ep->lock);
|
|
spin_lock_init(&ep->napi_lock);
|
|
ep->reschedule_in_poll = 0;
|
|
|
|
/* Bring the chip out of low-power mode. */
|
|
outl(0x4200, ioaddr + GENCTL);
|
|
/* Magic?! If we don't set this bit the MII interface won't work. */
|
|
/* This magic is documented in SMSC app note 7.15 */
|
|
for (i = 16; i > 0; i--)
|
|
outl(0x0008, ioaddr + TEST1);
|
|
|
|
/* Turn on the MII transceiver. */
|
|
outl(0x12, ioaddr + MIICfg);
|
|
if (chip_idx == 1)
|
|
outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
|
|
outl(0x0200, ioaddr + GENCTL);
|
|
|
|
/* Note: the '175 does not have a serial EEPROM. */
|
|
for (i = 0; i < 3; i++)
|
|
((u16 *)dev->dev_addr)[i] = le16_to_cpu(inw(ioaddr + LAN0 + i*4));
|
|
|
|
if (debug > 2) {
|
|
dev_printk(KERN_DEBUG, &pdev->dev, "EEPROM contents:\n");
|
|
for (i = 0; i < 64; i++)
|
|
printk(" %4.4x%s", read_eeprom(ioaddr, i),
|
|
i % 16 == 15 ? "\n" : "");
|
|
}
|
|
|
|
ep->pci_dev = pdev;
|
|
ep->chip_id = chip_idx;
|
|
ep->chip_flags = pci_id_tbl[chip_idx].drv_flags;
|
|
ep->irq_mask =
|
|
(ep->chip_flags & TYPE2_INTR ? PCIBusErr175 : PCIBusErr170)
|
|
| CntFull | TxUnderrun | EpicNapiEvent;
|
|
|
|
/* Find the connected MII xcvrs.
|
|
Doing this in open() would allow detecting external xcvrs later, but
|
|
takes much time and no cards have external MII. */
|
|
{
|
|
int phy, phy_idx = 0;
|
|
for (phy = 1; phy < 32 && phy_idx < sizeof(ep->phys); phy++) {
|
|
int mii_status = mdio_read(dev, phy, MII_BMSR);
|
|
if (mii_status != 0xffff && mii_status != 0x0000) {
|
|
ep->phys[phy_idx++] = phy;
|
|
dev_info(&pdev->dev,
|
|
"MII transceiver #%d control "
|
|
"%4.4x status %4.4x.\n",
|
|
phy, mdio_read(dev, phy, 0), mii_status);
|
|
}
|
|
}
|
|
ep->mii_phy_cnt = phy_idx;
|
|
if (phy_idx != 0) {
|
|
phy = ep->phys[0];
|
|
ep->mii.advertising = mdio_read(dev, phy, MII_ADVERTISE);
|
|
dev_info(&pdev->dev,
|
|
"Autonegotiation advertising %4.4x link "
|
|
"partner %4.4x.\n",
|
|
ep->mii.advertising, mdio_read(dev, phy, 5));
|
|
} else if ( ! (ep->chip_flags & NO_MII)) {
|
|
dev_warn(&pdev->dev,
|
|
"***WARNING***: No MII transceiver found!\n");
|
|
/* Use the known PHY address of the EPII. */
|
|
ep->phys[0] = 3;
|
|
}
|
|
ep->mii.phy_id = ep->phys[0];
|
|
}
|
|
|
|
/* Turn off the MII xcvr (175 only!), leave the chip in low-power mode. */
|
|
if (ep->chip_flags & MII_PWRDWN)
|
|
outl(inl(ioaddr + NVCTL) & ~0x483C, ioaddr + NVCTL);
|
|
outl(0x0008, ioaddr + GENCTL);
|
|
|
|
/* The lower four bits are the media type. */
|
|
if (duplex) {
|
|
ep->mii.force_media = ep->mii.full_duplex = 1;
|
|
dev_info(&pdev->dev, "Forced full duplex requested.\n");
|
|
}
|
|
dev->if_port = ep->default_port = option;
|
|
|
|
/* The Epic-specific entries in the device structure. */
|
|
dev->open = &epic_open;
|
|
dev->hard_start_xmit = &epic_start_xmit;
|
|
dev->stop = &epic_close;
|
|
dev->get_stats = &epic_get_stats;
|
|
dev->set_multicast_list = &set_rx_mode;
|
|
dev->do_ioctl = &netdev_ioctl;
|
|
dev->ethtool_ops = &netdev_ethtool_ops;
|
|
dev->watchdog_timeo = TX_TIMEOUT;
|
|
dev->tx_timeout = &epic_tx_timeout;
|
|
dev->poll = epic_poll;
|
|
dev->weight = 64;
|
|
|
|
ret = register_netdev(dev);
|
|
if (ret < 0)
|
|
goto err_out_unmap_rx;
|
|
|
|
printk(KERN_INFO "%s: %s at %#lx, IRQ %d, ",
|
|
dev->name, pci_id_tbl[chip_idx].name, ioaddr, dev->irq);
|
|
for (i = 0; i < 5; i++)
|
|
printk("%2.2x:", dev->dev_addr[i]);
|
|
printk("%2.2x.\n", dev->dev_addr[i]);
|
|
|
|
out:
|
|
return ret;
|
|
|
|
err_out_unmap_rx:
|
|
pci_free_consistent(pdev, RX_TOTAL_SIZE, ep->rx_ring, ep->rx_ring_dma);
|
|
err_out_unmap_tx:
|
|
pci_free_consistent(pdev, TX_TOTAL_SIZE, ep->tx_ring, ep->tx_ring_dma);
|
|
err_out_iounmap:
|
|
#ifndef USE_IO_OPS
|
|
iounmap(ioaddr);
|
|
err_out_free_netdev:
|
|
#endif
|
|
free_netdev(dev);
|
|
err_out_free_res:
|
|
pci_release_regions(pdev);
|
|
err_out_disable:
|
|
pci_disable_device(pdev);
|
|
goto out;
|
|
}
|
|
|
|
/* Serial EEPROM section. */
|
|
|
|
/* EEPROM_Ctrl bits. */
|
|
#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
|
|
#define EE_CS 0x02 /* EEPROM chip select. */
|
|
#define EE_DATA_WRITE 0x08 /* EEPROM chip data in. */
|
|
#define EE_WRITE_0 0x01
|
|
#define EE_WRITE_1 0x09
|
|
#define EE_DATA_READ 0x10 /* EEPROM chip data out. */
|
|
#define EE_ENB (0x0001 | EE_CS)
|
|
|
|
/* Delay between EEPROM clock transitions.
|
|
This serves to flush the operation to the PCI bus.
|
|
*/
|
|
|
|
#define eeprom_delay() inl(ee_addr)
|
|
|
|
/* The EEPROM commands include the alway-set leading bit. */
|
|
#define EE_WRITE_CMD (5 << 6)
|
|
#define EE_READ64_CMD (6 << 6)
|
|
#define EE_READ256_CMD (6 << 8)
|
|
#define EE_ERASE_CMD (7 << 6)
|
|
|
|
static void epic_disable_int(struct net_device *dev, struct epic_private *ep)
|
|
{
|
|
long ioaddr = dev->base_addr;
|
|
|
|
outl(0x00000000, ioaddr + INTMASK);
|
|
}
|
|
|
|
static inline void __epic_pci_commit(long ioaddr)
|
|
{
|
|
#ifndef USE_IO_OPS
|
|
inl(ioaddr + INTMASK);
|
|
#endif
|
|
}
|
|
|
|
static inline void epic_napi_irq_off(struct net_device *dev,
|
|
struct epic_private *ep)
|
|
{
|
|
long ioaddr = dev->base_addr;
|
|
|
|
outl(ep->irq_mask & ~EpicNapiEvent, ioaddr + INTMASK);
|
|
__epic_pci_commit(ioaddr);
|
|
}
|
|
|
|
static inline void epic_napi_irq_on(struct net_device *dev,
|
|
struct epic_private *ep)
|
|
{
|
|
long ioaddr = dev->base_addr;
|
|
|
|
/* No need to commit possible posted write */
|
|
outl(ep->irq_mask | EpicNapiEvent, ioaddr + INTMASK);
|
|
}
|
|
|
|
static int __devinit read_eeprom(long ioaddr, int location)
|
|
{
|
|
int i;
|
|
int retval = 0;
|
|
long ee_addr = ioaddr + EECTL;
|
|
int read_cmd = location |
|
|
(inl(ee_addr) & 0x40 ? EE_READ64_CMD : EE_READ256_CMD);
|
|
|
|
outl(EE_ENB & ~EE_CS, ee_addr);
|
|
outl(EE_ENB, ee_addr);
|
|
|
|
/* Shift the read command bits out. */
|
|
for (i = 12; i >= 0; i--) {
|
|
short dataval = (read_cmd & (1 << i)) ? EE_WRITE_1 : EE_WRITE_0;
|
|
outl(EE_ENB | dataval, ee_addr);
|
|
eeprom_delay();
|
|
outl(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
|
|
eeprom_delay();
|
|
}
|
|
outl(EE_ENB, ee_addr);
|
|
|
|
for (i = 16; i > 0; i--) {
|
|
outl(EE_ENB | EE_SHIFT_CLK, ee_addr);
|
|
eeprom_delay();
|
|
retval = (retval << 1) | ((inl(ee_addr) & EE_DATA_READ) ? 1 : 0);
|
|
outl(EE_ENB, ee_addr);
|
|
eeprom_delay();
|
|
}
|
|
|
|
/* Terminate the EEPROM access. */
|
|
outl(EE_ENB & ~EE_CS, ee_addr);
|
|
return retval;
|
|
}
|
|
|
|
#define MII_READOP 1
|
|
#define MII_WRITEOP 2
|
|
static int mdio_read(struct net_device *dev, int phy_id, int location)
|
|
{
|
|
long ioaddr = dev->base_addr;
|
|
int read_cmd = (phy_id << 9) | (location << 4) | MII_READOP;
|
|
int i;
|
|
|
|
outl(read_cmd, ioaddr + MIICtrl);
|
|
/* Typical operation takes 25 loops. */
|
|
for (i = 400; i > 0; i--) {
|
|
barrier();
|
|
if ((inl(ioaddr + MIICtrl) & MII_READOP) == 0) {
|
|
/* Work around read failure bug. */
|
|
if (phy_id == 1 && location < 6
|
|
&& inw(ioaddr + MIIData) == 0xffff) {
|
|
outl(read_cmd, ioaddr + MIICtrl);
|
|
continue;
|
|
}
|
|
return inw(ioaddr + MIIData);
|
|
}
|
|
}
|
|
return 0xffff;
|
|
}
|
|
|
|
static void mdio_write(struct net_device *dev, int phy_id, int loc, int value)
|
|
{
|
|
long ioaddr = dev->base_addr;
|
|
int i;
|
|
|
|
outw(value, ioaddr + MIIData);
|
|
outl((phy_id << 9) | (loc << 4) | MII_WRITEOP, ioaddr + MIICtrl);
|
|
for (i = 10000; i > 0; i--) {
|
|
barrier();
|
|
if ((inl(ioaddr + MIICtrl) & MII_WRITEOP) == 0)
|
|
break;
|
|
}
|
|
return;
|
|
}
|
|
|
|
|
|
static int epic_open(struct net_device *dev)
|
|
{
|
|
struct epic_private *ep = dev->priv;
|
|
long ioaddr = dev->base_addr;
|
|
int i;
|
|
int retval;
|
|
|
|
/* Soft reset the chip. */
|
|
outl(0x4001, ioaddr + GENCTL);
|
|
|
|
if ((retval = request_irq(dev->irq, &epic_interrupt, IRQF_SHARED, dev->name, dev)))
|
|
return retval;
|
|
|
|
epic_init_ring(dev);
|
|
|
|
outl(0x4000, ioaddr + GENCTL);
|
|
/* This magic is documented in SMSC app note 7.15 */
|
|
for (i = 16; i > 0; i--)
|
|
outl(0x0008, ioaddr + TEST1);
|
|
|
|
/* Pull the chip out of low-power mode, enable interrupts, and set for
|
|
PCI read multiple. The MIIcfg setting and strange write order are
|
|
required by the details of which bits are reset and the transceiver
|
|
wiring on the Ositech CardBus card.
|
|
*/
|
|
#if 0
|
|
outl(dev->if_port == 1 ? 0x13 : 0x12, ioaddr + MIICfg);
|
|
#endif
|
|
if (ep->chip_flags & MII_PWRDWN)
|
|
outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
|
|
|
|
#if defined(__powerpc__) || defined(__sparc__) /* Big endian */
|
|
outl(0x4432 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
|
|
inl(ioaddr + GENCTL);
|
|
outl(0x0432 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
|
|
#else
|
|
outl(0x4412 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
|
|
inl(ioaddr + GENCTL);
|
|
outl(0x0412 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
|
|
#endif
|
|
|
|
udelay(20); /* Looks like EPII needs that if you want reliable RX init. FIXME: pci posting bug? */
|
|
|
|
for (i = 0; i < 3; i++)
|
|
outl(cpu_to_le16(((u16*)dev->dev_addr)[i]), ioaddr + LAN0 + i*4);
|
|
|
|
ep->tx_threshold = TX_FIFO_THRESH;
|
|
outl(ep->tx_threshold, ioaddr + TxThresh);
|
|
|
|
if (media2miictl[dev->if_port & 15]) {
|
|
if (ep->mii_phy_cnt)
|
|
mdio_write(dev, ep->phys[0], MII_BMCR, media2miictl[dev->if_port&15]);
|
|
if (dev->if_port == 1) {
|
|
if (debug > 1)
|
|
printk(KERN_INFO "%s: Using the 10base2 transceiver, MII "
|
|
"status %4.4x.\n",
|
|
dev->name, mdio_read(dev, ep->phys[0], MII_BMSR));
|
|
}
|
|
} else {
|
|
int mii_lpa = mdio_read(dev, ep->phys[0], MII_LPA);
|
|
if (mii_lpa != 0xffff) {
|
|
if ((mii_lpa & LPA_100FULL) || (mii_lpa & 0x01C0) == LPA_10FULL)
|
|
ep->mii.full_duplex = 1;
|
|
else if (! (mii_lpa & LPA_LPACK))
|
|
mdio_write(dev, ep->phys[0], MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART);
|
|
if (debug > 1)
|
|
printk(KERN_INFO "%s: Setting %s-duplex based on MII xcvr %d"
|
|
" register read of %4.4x.\n", dev->name,
|
|
ep->mii.full_duplex ? "full" : "half",
|
|
ep->phys[0], mii_lpa);
|
|
}
|
|
}
|
|
|
|
outl(ep->mii.full_duplex ? 0x7F : 0x79, ioaddr + TxCtrl);
|
|
outl(ep->rx_ring_dma, ioaddr + PRxCDAR);
|
|
outl(ep->tx_ring_dma, ioaddr + PTxCDAR);
|
|
|
|
/* Start the chip's Rx process. */
|
|
set_rx_mode(dev);
|
|
outl(StartRx | RxQueued, ioaddr + COMMAND);
|
|
|
|
netif_start_queue(dev);
|
|
|
|
/* Enable interrupts by setting the interrupt mask. */
|
|
outl((ep->chip_flags & TYPE2_INTR ? PCIBusErr175 : PCIBusErr170)
|
|
| CntFull | TxUnderrun
|
|
| RxError | RxHeader | EpicNapiEvent, ioaddr + INTMASK);
|
|
|
|
if (debug > 1)
|
|
printk(KERN_DEBUG "%s: epic_open() ioaddr %lx IRQ %d status %4.4x "
|
|
"%s-duplex.\n",
|
|
dev->name, ioaddr, dev->irq, (int)inl(ioaddr + GENCTL),
|
|
ep->mii.full_duplex ? "full" : "half");
|
|
|
|
/* Set the timer to switch to check for link beat and perhaps switch
|
|
to an alternate media type. */
|
|
init_timer(&ep->timer);
|
|
ep->timer.expires = jiffies + 3*HZ;
|
|
ep->timer.data = (unsigned long)dev;
|
|
ep->timer.function = &epic_timer; /* timer handler */
|
|
add_timer(&ep->timer);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Reset the chip to recover from a PCI transaction error.
|
|
This may occur at interrupt time. */
|
|
static void epic_pause(struct net_device *dev)
|
|
{
|
|
long ioaddr = dev->base_addr;
|
|
struct epic_private *ep = dev->priv;
|
|
|
|
netif_stop_queue (dev);
|
|
|
|
/* Disable interrupts by clearing the interrupt mask. */
|
|
outl(0x00000000, ioaddr + INTMASK);
|
|
/* Stop the chip's Tx and Rx DMA processes. */
|
|
outw(StopRx | StopTxDMA | StopRxDMA, ioaddr + COMMAND);
|
|
|
|
/* Update the error counts. */
|
|
if (inw(ioaddr + COMMAND) != 0xffff) {
|
|
ep->stats.rx_missed_errors += inb(ioaddr + MPCNT);
|
|
ep->stats.rx_frame_errors += inb(ioaddr + ALICNT);
|
|
ep->stats.rx_crc_errors += inb(ioaddr + CRCCNT);
|
|
}
|
|
|
|
/* Remove the packets on the Rx queue. */
|
|
epic_rx(dev, RX_RING_SIZE);
|
|
}
|
|
|
|
static void epic_restart(struct net_device *dev)
|
|
{
|
|
long ioaddr = dev->base_addr;
|
|
struct epic_private *ep = dev->priv;
|
|
int i;
|
|
|
|
/* Soft reset the chip. */
|
|
outl(0x4001, ioaddr + GENCTL);
|
|
|
|
printk(KERN_DEBUG "%s: Restarting the EPIC chip, Rx %d/%d Tx %d/%d.\n",
|
|
dev->name, ep->cur_rx, ep->dirty_rx, ep->dirty_tx, ep->cur_tx);
|
|
udelay(1);
|
|
|
|
/* This magic is documented in SMSC app note 7.15 */
|
|
for (i = 16; i > 0; i--)
|
|
outl(0x0008, ioaddr + TEST1);
|
|
|
|
#if defined(__powerpc__) || defined(__sparc__) /* Big endian */
|
|
outl(0x0432 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
|
|
#else
|
|
outl(0x0412 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
|
|
#endif
|
|
outl(dev->if_port == 1 ? 0x13 : 0x12, ioaddr + MIICfg);
|
|
if (ep->chip_flags & MII_PWRDWN)
|
|
outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
|
|
|
|
for (i = 0; i < 3; i++)
|
|
outl(cpu_to_le16(((u16*)dev->dev_addr)[i]), ioaddr + LAN0 + i*4);
|
|
|
|
ep->tx_threshold = TX_FIFO_THRESH;
|
|
outl(ep->tx_threshold, ioaddr + TxThresh);
|
|
outl(ep->mii.full_duplex ? 0x7F : 0x79, ioaddr + TxCtrl);
|
|
outl(ep->rx_ring_dma + (ep->cur_rx%RX_RING_SIZE)*
|
|
sizeof(struct epic_rx_desc), ioaddr + PRxCDAR);
|
|
outl(ep->tx_ring_dma + (ep->dirty_tx%TX_RING_SIZE)*
|
|
sizeof(struct epic_tx_desc), ioaddr + PTxCDAR);
|
|
|
|
/* Start the chip's Rx process. */
|
|
set_rx_mode(dev);
|
|
outl(StartRx | RxQueued, ioaddr + COMMAND);
|
|
|
|
/* Enable interrupts by setting the interrupt mask. */
|
|
outl((ep->chip_flags & TYPE2_INTR ? PCIBusErr175 : PCIBusErr170)
|
|
| CntFull | TxUnderrun
|
|
| RxError | RxHeader | EpicNapiEvent, ioaddr + INTMASK);
|
|
|
|
printk(KERN_DEBUG "%s: epic_restart() done, cmd status %4.4x, ctl %4.4x"
|
|
" interrupt %4.4x.\n",
|
|
dev->name, (int)inl(ioaddr + COMMAND), (int)inl(ioaddr + GENCTL),
|
|
(int)inl(ioaddr + INTSTAT));
|
|
return;
|
|
}
|
|
|
|
static void check_media(struct net_device *dev)
|
|
{
|
|
struct epic_private *ep = dev->priv;
|
|
long ioaddr = dev->base_addr;
|
|
int mii_lpa = ep->mii_phy_cnt ? mdio_read(dev, ep->phys[0], MII_LPA) : 0;
|
|
int negotiated = mii_lpa & ep->mii.advertising;
|
|
int duplex = (negotiated & 0x0100) || (negotiated & 0x01C0) == 0x0040;
|
|
|
|
if (ep->mii.force_media)
|
|
return;
|
|
if (mii_lpa == 0xffff) /* Bogus read */
|
|
return;
|
|
if (ep->mii.full_duplex != duplex) {
|
|
ep->mii.full_duplex = duplex;
|
|
printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d link"
|
|
" partner capability of %4.4x.\n", dev->name,
|
|
ep->mii.full_duplex ? "full" : "half", ep->phys[0], mii_lpa);
|
|
outl(ep->mii.full_duplex ? 0x7F : 0x79, ioaddr + TxCtrl);
|
|
}
|
|
}
|
|
|
|
static void epic_timer(unsigned long data)
|
|
{
|
|
struct net_device *dev = (struct net_device *)data;
|
|
struct epic_private *ep = dev->priv;
|
|
long ioaddr = dev->base_addr;
|
|
int next_tick = 5*HZ;
|
|
|
|
if (debug > 3) {
|
|
printk(KERN_DEBUG "%s: Media monitor tick, Tx status %8.8x.\n",
|
|
dev->name, (int)inl(ioaddr + TxSTAT));
|
|
printk(KERN_DEBUG "%s: Other registers are IntMask %4.4x "
|
|
"IntStatus %4.4x RxStatus %4.4x.\n",
|
|
dev->name, (int)inl(ioaddr + INTMASK),
|
|
(int)inl(ioaddr + INTSTAT), (int)inl(ioaddr + RxSTAT));
|
|
}
|
|
|
|
check_media(dev);
|
|
|
|
ep->timer.expires = jiffies + next_tick;
|
|
add_timer(&ep->timer);
|
|
}
|
|
|
|
static void epic_tx_timeout(struct net_device *dev)
|
|
{
|
|
struct epic_private *ep = dev->priv;
|
|
long ioaddr = dev->base_addr;
|
|
|
|
if (debug > 0) {
|
|
printk(KERN_WARNING "%s: Transmit timeout using MII device, "
|
|
"Tx status %4.4x.\n",
|
|
dev->name, (int)inw(ioaddr + TxSTAT));
|
|
if (debug > 1) {
|
|
printk(KERN_DEBUG "%s: Tx indices: dirty_tx %d, cur_tx %d.\n",
|
|
dev->name, ep->dirty_tx, ep->cur_tx);
|
|
}
|
|
}
|
|
if (inw(ioaddr + TxSTAT) & 0x10) { /* Tx FIFO underflow. */
|
|
ep->stats.tx_fifo_errors++;
|
|
outl(RestartTx, ioaddr + COMMAND);
|
|
} else {
|
|
epic_restart(dev);
|
|
outl(TxQueued, dev->base_addr + COMMAND);
|
|
}
|
|
|
|
dev->trans_start = jiffies;
|
|
ep->stats.tx_errors++;
|
|
if (!ep->tx_full)
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
|
|
static void epic_init_ring(struct net_device *dev)
|
|
{
|
|
struct epic_private *ep = dev->priv;
|
|
int i;
|
|
|
|
ep->tx_full = 0;
|
|
ep->dirty_tx = ep->cur_tx = 0;
|
|
ep->cur_rx = ep->dirty_rx = 0;
|
|
ep->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
|
|
|
|
/* Initialize all Rx descriptors. */
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
ep->rx_ring[i].rxstatus = 0;
|
|
ep->rx_ring[i].buflength = cpu_to_le32(ep->rx_buf_sz);
|
|
ep->rx_ring[i].next = ep->rx_ring_dma +
|
|
(i+1)*sizeof(struct epic_rx_desc);
|
|
ep->rx_skbuff[i] = NULL;
|
|
}
|
|
/* Mark the last entry as wrapping the ring. */
|
|
ep->rx_ring[i-1].next = ep->rx_ring_dma;
|
|
|
|
/* Fill in the Rx buffers. Handle allocation failure gracefully. */
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
struct sk_buff *skb = dev_alloc_skb(ep->rx_buf_sz);
|
|
ep->rx_skbuff[i] = skb;
|
|
if (skb == NULL)
|
|
break;
|
|
skb_reserve(skb, 2); /* 16 byte align the IP header. */
|
|
ep->rx_ring[i].bufaddr = pci_map_single(ep->pci_dev,
|
|
skb->data, ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
|
|
ep->rx_ring[i].rxstatus = cpu_to_le32(DescOwn);
|
|
}
|
|
ep->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
|
|
|
|
/* The Tx buffer descriptor is filled in as needed, but we
|
|
do need to clear the ownership bit. */
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
ep->tx_skbuff[i] = NULL;
|
|
ep->tx_ring[i].txstatus = 0x0000;
|
|
ep->tx_ring[i].next = ep->tx_ring_dma +
|
|
(i+1)*sizeof(struct epic_tx_desc);
|
|
}
|
|
ep->tx_ring[i-1].next = ep->tx_ring_dma;
|
|
return;
|
|
}
|
|
|
|
static int epic_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct epic_private *ep = dev->priv;
|
|
int entry, free_count;
|
|
u32 ctrl_word;
|
|
unsigned long flags;
|
|
|
|
if (skb_padto(skb, ETH_ZLEN))
|
|
return 0;
|
|
|
|
/* Caution: the write order is important here, set the field with the
|
|
"ownership" bit last. */
|
|
|
|
/* Calculate the next Tx descriptor entry. */
|
|
spin_lock_irqsave(&ep->lock, flags);
|
|
free_count = ep->cur_tx - ep->dirty_tx;
|
|
entry = ep->cur_tx % TX_RING_SIZE;
|
|
|
|
ep->tx_skbuff[entry] = skb;
|
|
ep->tx_ring[entry].bufaddr = pci_map_single(ep->pci_dev, skb->data,
|
|
skb->len, PCI_DMA_TODEVICE);
|
|
if (free_count < TX_QUEUE_LEN/2) {/* Typical path */
|
|
ctrl_word = cpu_to_le32(0x100000); /* No interrupt */
|
|
} else if (free_count == TX_QUEUE_LEN/2) {
|
|
ctrl_word = cpu_to_le32(0x140000); /* Tx-done intr. */
|
|
} else if (free_count < TX_QUEUE_LEN - 1) {
|
|
ctrl_word = cpu_to_le32(0x100000); /* No Tx-done intr. */
|
|
} else {
|
|
/* Leave room for an additional entry. */
|
|
ctrl_word = cpu_to_le32(0x140000); /* Tx-done intr. */
|
|
ep->tx_full = 1;
|
|
}
|
|
ep->tx_ring[entry].buflength = ctrl_word | cpu_to_le32(skb->len);
|
|
ep->tx_ring[entry].txstatus =
|
|
((skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN) << 16)
|
|
| cpu_to_le32(DescOwn);
|
|
|
|
ep->cur_tx++;
|
|
if (ep->tx_full)
|
|
netif_stop_queue(dev);
|
|
|
|
spin_unlock_irqrestore(&ep->lock, flags);
|
|
/* Trigger an immediate transmit demand. */
|
|
outl(TxQueued, dev->base_addr + COMMAND);
|
|
|
|
dev->trans_start = jiffies;
|
|
if (debug > 4)
|
|
printk(KERN_DEBUG "%s: Queued Tx packet size %d to slot %d, "
|
|
"flag %2.2x Tx status %8.8x.\n",
|
|
dev->name, (int)skb->len, entry, ctrl_word,
|
|
(int)inl(dev->base_addr + TxSTAT));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void epic_tx_error(struct net_device *dev, struct epic_private *ep,
|
|
int status)
|
|
{
|
|
struct net_device_stats *stats = &ep->stats;
|
|
|
|
#ifndef final_version
|
|
/* There was an major error, log it. */
|
|
if (debug > 1)
|
|
printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
|
|
dev->name, status);
|
|
#endif
|
|
stats->tx_errors++;
|
|
if (status & 0x1050)
|
|
stats->tx_aborted_errors++;
|
|
if (status & 0x0008)
|
|
stats->tx_carrier_errors++;
|
|
if (status & 0x0040)
|
|
stats->tx_window_errors++;
|
|
if (status & 0x0010)
|
|
stats->tx_fifo_errors++;
|
|
}
|
|
|
|
static void epic_tx(struct net_device *dev, struct epic_private *ep)
|
|
{
|
|
unsigned int dirty_tx, cur_tx;
|
|
|
|
/*
|
|
* Note: if this lock becomes a problem we can narrow the locked
|
|
* region at the cost of occasionally grabbing the lock more times.
|
|
*/
|
|
cur_tx = ep->cur_tx;
|
|
for (dirty_tx = ep->dirty_tx; cur_tx - dirty_tx > 0; dirty_tx++) {
|
|
struct sk_buff *skb;
|
|
int entry = dirty_tx % TX_RING_SIZE;
|
|
int txstatus = le32_to_cpu(ep->tx_ring[entry].txstatus);
|
|
|
|
if (txstatus & DescOwn)
|
|
break; /* It still hasn't been Txed */
|
|
|
|
if (likely(txstatus & 0x0001)) {
|
|
ep->stats.collisions += (txstatus >> 8) & 15;
|
|
ep->stats.tx_packets++;
|
|
ep->stats.tx_bytes += ep->tx_skbuff[entry]->len;
|
|
} else
|
|
epic_tx_error(dev, ep, txstatus);
|
|
|
|
/* Free the original skb. */
|
|
skb = ep->tx_skbuff[entry];
|
|
pci_unmap_single(ep->pci_dev, ep->tx_ring[entry].bufaddr,
|
|
skb->len, PCI_DMA_TODEVICE);
|
|
dev_kfree_skb_irq(skb);
|
|
ep->tx_skbuff[entry] = NULL;
|
|
}
|
|
|
|
#ifndef final_version
|
|
if (cur_tx - dirty_tx > TX_RING_SIZE) {
|
|
printk(KERN_WARNING
|
|
"%s: Out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
|
|
dev->name, dirty_tx, cur_tx, ep->tx_full);
|
|
dirty_tx += TX_RING_SIZE;
|
|
}
|
|
#endif
|
|
ep->dirty_tx = dirty_tx;
|
|
if (ep->tx_full && cur_tx - dirty_tx < TX_QUEUE_LEN - 4) {
|
|
/* The ring is no longer full, allow new TX entries. */
|
|
ep->tx_full = 0;
|
|
netif_wake_queue(dev);
|
|
}
|
|
}
|
|
|
|
/* The interrupt handler does all of the Rx thread work and cleans up
|
|
after the Tx thread. */
|
|
static irqreturn_t epic_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct net_device *dev = dev_instance;
|
|
struct epic_private *ep = dev->priv;
|
|
long ioaddr = dev->base_addr;
|
|
unsigned int handled = 0;
|
|
int status;
|
|
|
|
status = inl(ioaddr + INTSTAT);
|
|
/* Acknowledge all of the current interrupt sources ASAP. */
|
|
outl(status & EpicNormalEvent, ioaddr + INTSTAT);
|
|
|
|
if (debug > 4) {
|
|
printk(KERN_DEBUG "%s: Interrupt, status=%#8.8x new "
|
|
"intstat=%#8.8x.\n", dev->name, status,
|
|
(int)inl(ioaddr + INTSTAT));
|
|
}
|
|
|
|
if ((status & IntrSummary) == 0)
|
|
goto out;
|
|
|
|
handled = 1;
|
|
|
|
if ((status & EpicNapiEvent) && !ep->reschedule_in_poll) {
|
|
spin_lock(&ep->napi_lock);
|
|
if (netif_rx_schedule_prep(dev)) {
|
|
epic_napi_irq_off(dev, ep);
|
|
__netif_rx_schedule(dev);
|
|
} else
|
|
ep->reschedule_in_poll++;
|
|
spin_unlock(&ep->napi_lock);
|
|
}
|
|
status &= ~EpicNapiEvent;
|
|
|
|
/* Check uncommon events all at once. */
|
|
if (status & (CntFull | TxUnderrun | PCIBusErr170 | PCIBusErr175)) {
|
|
if (status == EpicRemoved)
|
|
goto out;
|
|
|
|
/* Always update the error counts to avoid overhead later. */
|
|
ep->stats.rx_missed_errors += inb(ioaddr + MPCNT);
|
|
ep->stats.rx_frame_errors += inb(ioaddr + ALICNT);
|
|
ep->stats.rx_crc_errors += inb(ioaddr + CRCCNT);
|
|
|
|
if (status & TxUnderrun) { /* Tx FIFO underflow. */
|
|
ep->stats.tx_fifo_errors++;
|
|
outl(ep->tx_threshold += 128, ioaddr + TxThresh);
|
|
/* Restart the transmit process. */
|
|
outl(RestartTx, ioaddr + COMMAND);
|
|
}
|
|
if (status & PCIBusErr170) {
|
|
printk(KERN_ERR "%s: PCI Bus Error! status %4.4x.\n",
|
|
dev->name, status);
|
|
epic_pause(dev);
|
|
epic_restart(dev);
|
|
}
|
|
/* Clear all error sources. */
|
|
outl(status & 0x7f18, ioaddr + INTSTAT);
|
|
}
|
|
|
|
out:
|
|
if (debug > 3) {
|
|
printk(KERN_DEBUG "%s: exit interrupt, intr_status=%#4.4x.\n",
|
|
dev->name, status);
|
|
}
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static int epic_rx(struct net_device *dev, int budget)
|
|
{
|
|
struct epic_private *ep = dev->priv;
|
|
int entry = ep->cur_rx % RX_RING_SIZE;
|
|
int rx_work_limit = ep->dirty_rx + RX_RING_SIZE - ep->cur_rx;
|
|
int work_done = 0;
|
|
|
|
if (debug > 4)
|
|
printk(KERN_DEBUG " In epic_rx(), entry %d %8.8x.\n", entry,
|
|
ep->rx_ring[entry].rxstatus);
|
|
|
|
if (rx_work_limit > budget)
|
|
rx_work_limit = budget;
|
|
|
|
/* If we own the next entry, it's a new packet. Send it up. */
|
|
while ((ep->rx_ring[entry].rxstatus & cpu_to_le32(DescOwn)) == 0) {
|
|
int status = le32_to_cpu(ep->rx_ring[entry].rxstatus);
|
|
|
|
if (debug > 4)
|
|
printk(KERN_DEBUG " epic_rx() status was %8.8x.\n", status);
|
|
if (--rx_work_limit < 0)
|
|
break;
|
|
if (status & 0x2006) {
|
|
if (debug > 2)
|
|
printk(KERN_DEBUG "%s: epic_rx() error status was %8.8x.\n",
|
|
dev->name, status);
|
|
if (status & 0x2000) {
|
|
printk(KERN_WARNING "%s: Oversized Ethernet frame spanned "
|
|
"multiple buffers, status %4.4x!\n", dev->name, status);
|
|
ep->stats.rx_length_errors++;
|
|
} else if (status & 0x0006)
|
|
/* Rx Frame errors are counted in hardware. */
|
|
ep->stats.rx_errors++;
|
|
} else {
|
|
/* Malloc up new buffer, compatible with net-2e. */
|
|
/* Omit the four octet CRC from the length. */
|
|
short pkt_len = (status >> 16) - 4;
|
|
struct sk_buff *skb;
|
|
|
|
if (pkt_len > PKT_BUF_SZ - 4) {
|
|
printk(KERN_ERR "%s: Oversized Ethernet frame, status %x "
|
|
"%d bytes.\n",
|
|
dev->name, status, pkt_len);
|
|
pkt_len = 1514;
|
|
}
|
|
/* Check if the packet is long enough to accept without copying
|
|
to a minimally-sized skbuff. */
|
|
if (pkt_len < rx_copybreak
|
|
&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
|
|
skb_reserve(skb, 2); /* 16 byte align the IP header */
|
|
pci_dma_sync_single_for_cpu(ep->pci_dev,
|
|
ep->rx_ring[entry].bufaddr,
|
|
ep->rx_buf_sz,
|
|
PCI_DMA_FROMDEVICE);
|
|
eth_copy_and_sum(skb, ep->rx_skbuff[entry]->data, pkt_len, 0);
|
|
skb_put(skb, pkt_len);
|
|
pci_dma_sync_single_for_device(ep->pci_dev,
|
|
ep->rx_ring[entry].bufaddr,
|
|
ep->rx_buf_sz,
|
|
PCI_DMA_FROMDEVICE);
|
|
} else {
|
|
pci_unmap_single(ep->pci_dev,
|
|
ep->rx_ring[entry].bufaddr,
|
|
ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
|
|
skb_put(skb = ep->rx_skbuff[entry], pkt_len);
|
|
ep->rx_skbuff[entry] = NULL;
|
|
}
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
netif_receive_skb(skb);
|
|
dev->last_rx = jiffies;
|
|
ep->stats.rx_packets++;
|
|
ep->stats.rx_bytes += pkt_len;
|
|
}
|
|
work_done++;
|
|
entry = (++ep->cur_rx) % RX_RING_SIZE;
|
|
}
|
|
|
|
/* Refill the Rx ring buffers. */
|
|
for (; ep->cur_rx - ep->dirty_rx > 0; ep->dirty_rx++) {
|
|
entry = ep->dirty_rx % RX_RING_SIZE;
|
|
if (ep->rx_skbuff[entry] == NULL) {
|
|
struct sk_buff *skb;
|
|
skb = ep->rx_skbuff[entry] = dev_alloc_skb(ep->rx_buf_sz);
|
|
if (skb == NULL)
|
|
break;
|
|
skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
|
|
ep->rx_ring[entry].bufaddr = pci_map_single(ep->pci_dev,
|
|
skb->data, ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
|
|
work_done++;
|
|
}
|
|
ep->rx_ring[entry].rxstatus = cpu_to_le32(DescOwn);
|
|
}
|
|
return work_done;
|
|
}
|
|
|
|
static void epic_rx_err(struct net_device *dev, struct epic_private *ep)
|
|
{
|
|
long ioaddr = dev->base_addr;
|
|
int status;
|
|
|
|
status = inl(ioaddr + INTSTAT);
|
|
|
|
if (status == EpicRemoved)
|
|
return;
|
|
if (status & RxOverflow) /* Missed a Rx frame. */
|
|
ep->stats.rx_errors++;
|
|
if (status & (RxOverflow | RxFull))
|
|
outw(RxQueued, ioaddr + COMMAND);
|
|
}
|
|
|
|
static int epic_poll(struct net_device *dev, int *budget)
|
|
{
|
|
struct epic_private *ep = dev->priv;
|
|
int work_done = 0, orig_budget;
|
|
long ioaddr = dev->base_addr;
|
|
|
|
orig_budget = (*budget > dev->quota) ? dev->quota : *budget;
|
|
|
|
rx_action:
|
|
|
|
epic_tx(dev, ep);
|
|
|
|
work_done += epic_rx(dev, *budget);
|
|
|
|
epic_rx_err(dev, ep);
|
|
|
|
*budget -= work_done;
|
|
dev->quota -= work_done;
|
|
|
|
if (netif_running(dev) && (work_done < orig_budget)) {
|
|
unsigned long flags;
|
|
int more;
|
|
|
|
/* A bit baroque but it avoids a (space hungry) spin_unlock */
|
|
|
|
spin_lock_irqsave(&ep->napi_lock, flags);
|
|
|
|
more = ep->reschedule_in_poll;
|
|
if (!more) {
|
|
__netif_rx_complete(dev);
|
|
outl(EpicNapiEvent, ioaddr + INTSTAT);
|
|
epic_napi_irq_on(dev, ep);
|
|
} else
|
|
ep->reschedule_in_poll--;
|
|
|
|
spin_unlock_irqrestore(&ep->napi_lock, flags);
|
|
|
|
if (more)
|
|
goto rx_action;
|
|
}
|
|
|
|
return (work_done >= orig_budget);
|
|
}
|
|
|
|
static int epic_close(struct net_device *dev)
|
|
{
|
|
long ioaddr = dev->base_addr;
|
|
struct epic_private *ep = dev->priv;
|
|
struct sk_buff *skb;
|
|
int i;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
if (debug > 1)
|
|
printk(KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
|
|
dev->name, (int)inl(ioaddr + INTSTAT));
|
|
|
|
del_timer_sync(&ep->timer);
|
|
|
|
epic_disable_int(dev, ep);
|
|
|
|
free_irq(dev->irq, dev);
|
|
|
|
epic_pause(dev);
|
|
|
|
/* Free all the skbuffs in the Rx queue. */
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
skb = ep->rx_skbuff[i];
|
|
ep->rx_skbuff[i] = NULL;
|
|
ep->rx_ring[i].rxstatus = 0; /* Not owned by Epic chip. */
|
|
ep->rx_ring[i].buflength = 0;
|
|
if (skb) {
|
|
pci_unmap_single(ep->pci_dev, ep->rx_ring[i].bufaddr,
|
|
ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb(skb);
|
|
}
|
|
ep->rx_ring[i].bufaddr = 0xBADF00D0; /* An invalid address. */
|
|
}
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
skb = ep->tx_skbuff[i];
|
|
ep->tx_skbuff[i] = NULL;
|
|
if (!skb)
|
|
continue;
|
|
pci_unmap_single(ep->pci_dev, ep->tx_ring[i].bufaddr,
|
|
skb->len, PCI_DMA_TODEVICE);
|
|
dev_kfree_skb(skb);
|
|
}
|
|
|
|
/* Green! Leave the chip in low-power mode. */
|
|
outl(0x0008, ioaddr + GENCTL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct net_device_stats *epic_get_stats(struct net_device *dev)
|
|
{
|
|
struct epic_private *ep = dev->priv;
|
|
long ioaddr = dev->base_addr;
|
|
|
|
if (netif_running(dev)) {
|
|
/* Update the error counts. */
|
|
ep->stats.rx_missed_errors += inb(ioaddr + MPCNT);
|
|
ep->stats.rx_frame_errors += inb(ioaddr + ALICNT);
|
|
ep->stats.rx_crc_errors += inb(ioaddr + CRCCNT);
|
|
}
|
|
|
|
return &ep->stats;
|
|
}
|
|
|
|
/* Set or clear the multicast filter for this adaptor.
|
|
Note that we only use exclusion around actually queueing the
|
|
new frame, not around filling ep->setup_frame. This is non-deterministic
|
|
when re-entered but still correct. */
|
|
|
|
static void set_rx_mode(struct net_device *dev)
|
|
{
|
|
long ioaddr = dev->base_addr;
|
|
struct epic_private *ep = dev->priv;
|
|
unsigned char mc_filter[8]; /* Multicast hash filter */
|
|
int i;
|
|
|
|
if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
|
|
outl(0x002C, ioaddr + RxCtrl);
|
|
/* Unconditionally log net taps. */
|
|
memset(mc_filter, 0xff, sizeof(mc_filter));
|
|
} else if ((dev->mc_count > 0) || (dev->flags & IFF_ALLMULTI)) {
|
|
/* There is apparently a chip bug, so the multicast filter
|
|
is never enabled. */
|
|
/* Too many to filter perfectly -- accept all multicasts. */
|
|
memset(mc_filter, 0xff, sizeof(mc_filter));
|
|
outl(0x000C, ioaddr + RxCtrl);
|
|
} else if (dev->mc_count == 0) {
|
|
outl(0x0004, ioaddr + RxCtrl);
|
|
return;
|
|
} else { /* Never executed, for now. */
|
|
struct dev_mc_list *mclist;
|
|
|
|
memset(mc_filter, 0, sizeof(mc_filter));
|
|
for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
|
|
i++, mclist = mclist->next) {
|
|
unsigned int bit_nr =
|
|
ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x3f;
|
|
mc_filter[bit_nr >> 3] |= (1 << bit_nr);
|
|
}
|
|
}
|
|
/* ToDo: perhaps we need to stop the Tx and Rx process here? */
|
|
if (memcmp(mc_filter, ep->mc_filter, sizeof(mc_filter))) {
|
|
for (i = 0; i < 4; i++)
|
|
outw(((u16 *)mc_filter)[i], ioaddr + MC0 + i*4);
|
|
memcpy(ep->mc_filter, mc_filter, sizeof(mc_filter));
|
|
}
|
|
return;
|
|
}
|
|
|
|
static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
|
|
{
|
|
struct epic_private *np = dev->priv;
|
|
|
|
strcpy (info->driver, DRV_NAME);
|
|
strcpy (info->version, DRV_VERSION);
|
|
strcpy (info->bus_info, pci_name(np->pci_dev));
|
|
}
|
|
|
|
static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct epic_private *np = dev->priv;
|
|
int rc;
|
|
|
|
spin_lock_irq(&np->lock);
|
|
rc = mii_ethtool_gset(&np->mii, cmd);
|
|
spin_unlock_irq(&np->lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct epic_private *np = dev->priv;
|
|
int rc;
|
|
|
|
spin_lock_irq(&np->lock);
|
|
rc = mii_ethtool_sset(&np->mii, cmd);
|
|
spin_unlock_irq(&np->lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int netdev_nway_reset(struct net_device *dev)
|
|
{
|
|
struct epic_private *np = dev->priv;
|
|
return mii_nway_restart(&np->mii);
|
|
}
|
|
|
|
static u32 netdev_get_link(struct net_device *dev)
|
|
{
|
|
struct epic_private *np = dev->priv;
|
|
return mii_link_ok(&np->mii);
|
|
}
|
|
|
|
static u32 netdev_get_msglevel(struct net_device *dev)
|
|
{
|
|
return debug;
|
|
}
|
|
|
|
static void netdev_set_msglevel(struct net_device *dev, u32 value)
|
|
{
|
|
debug = value;
|
|
}
|
|
|
|
static int ethtool_begin(struct net_device *dev)
|
|
{
|
|
unsigned long ioaddr = dev->base_addr;
|
|
/* power-up, if interface is down */
|
|
if (! netif_running(dev)) {
|
|
outl(0x0200, ioaddr + GENCTL);
|
|
outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void ethtool_complete(struct net_device *dev)
|
|
{
|
|
unsigned long ioaddr = dev->base_addr;
|
|
/* power-down, if interface is down */
|
|
if (! netif_running(dev)) {
|
|
outl(0x0008, ioaddr + GENCTL);
|
|
outl((inl(ioaddr + NVCTL) & ~0x483C) | 0x0000, ioaddr + NVCTL);
|
|
}
|
|
}
|
|
|
|
static const struct ethtool_ops netdev_ethtool_ops = {
|
|
.get_drvinfo = netdev_get_drvinfo,
|
|
.get_settings = netdev_get_settings,
|
|
.set_settings = netdev_set_settings,
|
|
.nway_reset = netdev_nway_reset,
|
|
.get_link = netdev_get_link,
|
|
.get_msglevel = netdev_get_msglevel,
|
|
.set_msglevel = netdev_set_msglevel,
|
|
.get_sg = ethtool_op_get_sg,
|
|
.get_tx_csum = ethtool_op_get_tx_csum,
|
|
.begin = ethtool_begin,
|
|
.complete = ethtool_complete
|
|
};
|
|
|
|
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct epic_private *np = dev->priv;
|
|
long ioaddr = dev->base_addr;
|
|
struct mii_ioctl_data *data = if_mii(rq);
|
|
int rc;
|
|
|
|
/* power-up, if interface is down */
|
|
if (! netif_running(dev)) {
|
|
outl(0x0200, ioaddr + GENCTL);
|
|
outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
|
|
}
|
|
|
|
/* all non-ethtool ioctls (the SIOC[GS]MIIxxx ioctls) */
|
|
spin_lock_irq(&np->lock);
|
|
rc = generic_mii_ioctl(&np->mii, data, cmd, NULL);
|
|
spin_unlock_irq(&np->lock);
|
|
|
|
/* power-down, if interface is down */
|
|
if (! netif_running(dev)) {
|
|
outl(0x0008, ioaddr + GENCTL);
|
|
outl((inl(ioaddr + NVCTL) & ~0x483C) | 0x0000, ioaddr + NVCTL);
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
|
|
static void __devexit epic_remove_one (struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct epic_private *ep = dev->priv;
|
|
|
|
pci_free_consistent(pdev, TX_TOTAL_SIZE, ep->tx_ring, ep->tx_ring_dma);
|
|
pci_free_consistent(pdev, RX_TOTAL_SIZE, ep->rx_ring, ep->rx_ring_dma);
|
|
unregister_netdev(dev);
|
|
#ifndef USE_IO_OPS
|
|
iounmap((void*) dev->base_addr);
|
|
#endif
|
|
pci_release_regions(pdev);
|
|
free_netdev(dev);
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
/* pci_power_off(pdev, -1); */
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int epic_suspend (struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
long ioaddr = dev->base_addr;
|
|
|
|
if (!netif_running(dev))
|
|
return 0;
|
|
epic_pause(dev);
|
|
/* Put the chip into low-power mode. */
|
|
outl(0x0008, ioaddr + GENCTL);
|
|
/* pci_power_off(pdev, -1); */
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int epic_resume (struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
|
|
if (!netif_running(dev))
|
|
return 0;
|
|
epic_restart(dev);
|
|
/* pci_power_on(pdev); */
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
|
|
static struct pci_driver epic_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = epic_pci_tbl,
|
|
.probe = epic_init_one,
|
|
.remove = __devexit_p(epic_remove_one),
|
|
#ifdef CONFIG_PM
|
|
.suspend = epic_suspend,
|
|
.resume = epic_resume,
|
|
#endif /* CONFIG_PM */
|
|
};
|
|
|
|
|
|
static int __init epic_init (void)
|
|
{
|
|
/* when a module, this is printed whether or not devices are found in probe */
|
|
#ifdef MODULE
|
|
printk (KERN_INFO "%s" KERN_INFO "%s",
|
|
version, version2);
|
|
#endif
|
|
|
|
return pci_register_driver(&epic_driver);
|
|
}
|
|
|
|
|
|
static void __exit epic_cleanup (void)
|
|
{
|
|
pci_unregister_driver (&epic_driver);
|
|
}
|
|
|
|
|
|
module_init(epic_init);
|
|
module_exit(epic_cleanup);
|