mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-18 08:35:08 +08:00
3ea4eac3e2
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200708194400.22213-1-grandmaster@al2klimov.de
Signed-off-by: Mark Brown <broonie@kernel.org>
40 lines
1.3 KiB
ReStructuredText
40 lines
1.3 KiB
ReStructuredText
===========================
|
|
Kernel driver spi-sc18is602
|
|
===========================
|
|
|
|
Supported chips:
|
|
|
|
* NXP SI18IS602/602B/603
|
|
|
|
Datasheet: https://www.nxp.com/documents/data_sheet/SC18IS602_602B_603.pdf
|
|
|
|
Author:
|
|
Guenter Roeck <linux@roeck-us.net>
|
|
|
|
|
|
Description
|
|
-----------
|
|
|
|
This driver provides connects a NXP SC18IS602/603 I2C-bus to SPI bridge to the
|
|
kernel's SPI core subsystem.
|
|
|
|
The driver does not probe for supported chips, since the SI18IS602/603 does not
|
|
support Chip ID registers. You will have to instantiate the devices explicitly.
|
|
Please see Documentation/i2c/instantiating-devices.rst for details.
|
|
|
|
|
|
Usage Notes
|
|
-----------
|
|
|
|
This driver requires the I2C adapter driver to support raw I2C messages. I2C
|
|
adapter drivers which can only handle the SMBus protocol are not supported.
|
|
|
|
The maximum SPI message size supported by SC18IS602/603 is 200 bytes. Attempts
|
|
to initiate longer transfers will fail with -EINVAL. EEPROM read operations and
|
|
similar large accesses have to be split into multiple chunks of no more than
|
|
200 bytes per SPI message (128 bytes of data per message is recommended). This
|
|
means that programs such as "cp" or "od", which automatically use large block
|
|
sizes to access a device, can not be used directly to read data from EEPROM.
|
|
Programs such as dd, where the block size can be specified, should be used
|
|
instead.
|