mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 01:54:09 +08:00
ff1269cb3d
This is necessary for the eventual removal of SCp from struct scsi_cmnd. Link: https://lore.kernel.org/r/20220218195117.25689-9-bvanassche@acm.org Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Ondrej Zary <linux@zary.sk> Suggested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
819 lines
21 KiB
C
819 lines
21 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Generic Generic NCR5380 driver
|
|
*
|
|
* Copyright 1993, Drew Eckhardt
|
|
* Visionary Computing
|
|
* (Unix and Linux consulting and custom programming)
|
|
* drew@colorado.edu
|
|
* +1 (303) 440-4894
|
|
*
|
|
* NCR53C400 extensions (c) 1994,1995,1996, Kevin Lentin
|
|
* K.Lentin@cs.monash.edu.au
|
|
*
|
|
* NCR53C400A extensions (c) 1996, Ingmar Baumgart
|
|
* ingmar@gonzo.schwaben.de
|
|
*
|
|
* DTC3181E extensions (c) 1997, Ronald van Cuijlenborg
|
|
* ronald.van.cuijlenborg@tip.nl or nutty@dds.nl
|
|
*
|
|
* Added ISAPNP support for DTC436 adapters,
|
|
* Thomas Sailer, sailer@ife.ee.ethz.ch
|
|
*
|
|
* See Documentation/scsi/g_NCR5380.rst for more info.
|
|
*/
|
|
|
|
#include <asm/io.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/module.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/isa.h>
|
|
#include <linux/pnp.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
/* Definitions for the core NCR5380 driver. */
|
|
|
|
#define NCR5380_read(reg) \
|
|
ioread8(hostdata->io + hostdata->offset + (reg))
|
|
#define NCR5380_write(reg, value) \
|
|
iowrite8(value, hostdata->io + hostdata->offset + (reg))
|
|
|
|
#define NCR5380_implementation_fields \
|
|
int offset; \
|
|
int c400_ctl_status; \
|
|
int c400_blk_cnt; \
|
|
int c400_host_buf; \
|
|
int io_width; \
|
|
int pdma_residual; \
|
|
int board
|
|
|
|
#define NCR5380_dma_xfer_len generic_NCR5380_dma_xfer_len
|
|
#define NCR5380_dma_recv_setup generic_NCR5380_precv
|
|
#define NCR5380_dma_send_setup generic_NCR5380_psend
|
|
#define NCR5380_dma_residual generic_NCR5380_dma_residual
|
|
|
|
#define NCR5380_intr generic_NCR5380_intr
|
|
#define NCR5380_queue_command generic_NCR5380_queue_command
|
|
#define NCR5380_abort generic_NCR5380_abort
|
|
#define NCR5380_host_reset generic_NCR5380_host_reset
|
|
#define NCR5380_info generic_NCR5380_info
|
|
|
|
#define NCR5380_io_delay(x) udelay(x)
|
|
|
|
#include "NCR5380.h"
|
|
|
|
#define DRV_MODULE_NAME "g_NCR5380"
|
|
|
|
#define NCR53C400_mem_base 0x3880
|
|
#define NCR53C400_host_buffer 0x3900
|
|
#define NCR53C400_region_size 0x3a00
|
|
|
|
#define BOARD_NCR5380 0
|
|
#define BOARD_NCR53C400 1
|
|
#define BOARD_NCR53C400A 2
|
|
#define BOARD_DTC3181E 3
|
|
#define BOARD_HP_C2502 4
|
|
|
|
#define IRQ_AUTO 254
|
|
|
|
#define MAX_CARDS 8
|
|
#define DMA_MAX_SIZE 32768
|
|
|
|
/* old-style parameters for compatibility */
|
|
static int ncr_irq = -1;
|
|
static int ncr_addr;
|
|
static int ncr_5380;
|
|
static int ncr_53c400;
|
|
static int ncr_53c400a;
|
|
static int dtc_3181e;
|
|
static int hp_c2502;
|
|
module_param_hw(ncr_irq, int, irq, 0);
|
|
module_param_hw(ncr_addr, int, ioport, 0);
|
|
module_param(ncr_5380, int, 0);
|
|
module_param(ncr_53c400, int, 0);
|
|
module_param(ncr_53c400a, int, 0);
|
|
module_param(dtc_3181e, int, 0);
|
|
module_param(hp_c2502, int, 0);
|
|
|
|
static int irq[] = { -1, -1, -1, -1, -1, -1, -1, -1 };
|
|
module_param_hw_array(irq, int, irq, NULL, 0);
|
|
MODULE_PARM_DESC(irq, "IRQ number(s) (0=none, 254=auto [default])");
|
|
|
|
static int base[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
|
|
module_param_hw_array(base, int, ioport, NULL, 0);
|
|
MODULE_PARM_DESC(base, "base address(es)");
|
|
|
|
static int card[] = { -1, -1, -1, -1, -1, -1, -1, -1 };
|
|
module_param_array(card, int, NULL, 0);
|
|
MODULE_PARM_DESC(card, "card type (0=NCR5380, 1=NCR53C400, 2=NCR53C400A, 3=DTC3181E, 4=HP C2502)");
|
|
|
|
MODULE_ALIAS("g_NCR5380_mmio");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static void g_NCR5380_trigger_irq(struct Scsi_Host *instance)
|
|
{
|
|
struct NCR5380_hostdata *hostdata = shost_priv(instance);
|
|
|
|
/*
|
|
* An interrupt is triggered whenever BSY = false, SEL = true
|
|
* and a bit set in the SELECT_ENABLE_REG is asserted on the
|
|
* SCSI bus.
|
|
*
|
|
* Note that the bus is only driven when the phase control signals
|
|
* (I/O, C/D, and MSG) match those in the TCR.
|
|
*/
|
|
NCR5380_write(TARGET_COMMAND_REG,
|
|
PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK));
|
|
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
|
|
NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
|
|
NCR5380_write(INITIATOR_COMMAND_REG,
|
|
ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_SEL);
|
|
|
|
msleep(1);
|
|
|
|
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
|
|
NCR5380_write(SELECT_ENABLE_REG, 0);
|
|
NCR5380_write(TARGET_COMMAND_REG, 0);
|
|
}
|
|
|
|
/**
|
|
* g_NCR5380_probe_irq - find the IRQ of a NCR5380 or equivalent
|
|
* @instance: SCSI host instance
|
|
*
|
|
* Autoprobe for the IRQ line used by the card by triggering an IRQ
|
|
* and then looking to see what interrupt actually turned up.
|
|
*/
|
|
|
|
static int g_NCR5380_probe_irq(struct Scsi_Host *instance)
|
|
{
|
|
struct NCR5380_hostdata *hostdata = shost_priv(instance);
|
|
int irq_mask, irq;
|
|
|
|
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
|
|
irq_mask = probe_irq_on();
|
|
g_NCR5380_trigger_irq(instance);
|
|
irq = probe_irq_off(irq_mask);
|
|
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
|
|
|
|
if (irq <= 0)
|
|
return NO_IRQ;
|
|
return irq;
|
|
}
|
|
|
|
/*
|
|
* Configure I/O address of 53C400A or DTC436 by writing magic numbers
|
|
* to ports 0x779 and 0x379.
|
|
*/
|
|
static void magic_configure(int idx, u8 irq, u8 magic[])
|
|
{
|
|
u8 cfg = 0;
|
|
|
|
outb(magic[0], 0x779);
|
|
outb(magic[1], 0x379);
|
|
outb(magic[2], 0x379);
|
|
outb(magic[3], 0x379);
|
|
outb(magic[4], 0x379);
|
|
|
|
if (irq == 9)
|
|
irq = 2;
|
|
|
|
if (idx >= 0 && idx <= 7)
|
|
cfg = 0x80 | idx | (irq << 4);
|
|
outb(cfg, 0x379);
|
|
}
|
|
|
|
static irqreturn_t legacy_empty_irq_handler(int irq, void *dev_id)
|
|
{
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int legacy_find_free_irq(int *irq_table)
|
|
{
|
|
while (*irq_table != -1) {
|
|
if (!request_irq(*irq_table, legacy_empty_irq_handler,
|
|
IRQF_PROBE_SHARED, "Test IRQ",
|
|
(void *)irq_table)) {
|
|
free_irq(*irq_table, (void *) irq_table);
|
|
return *irq_table;
|
|
}
|
|
irq_table++;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static unsigned int ncr_53c400a_ports[] = {
|
|
0x280, 0x290, 0x300, 0x310, 0x330, 0x340, 0x348, 0x350, 0
|
|
};
|
|
static unsigned int dtc_3181e_ports[] = {
|
|
0x220, 0x240, 0x280, 0x2a0, 0x2c0, 0x300, 0x320, 0x340, 0
|
|
};
|
|
static u8 ncr_53c400a_magic[] = { /* 53C400A & DTC436 */
|
|
0x59, 0xb9, 0xc5, 0xae, 0xa6
|
|
};
|
|
static u8 hp_c2502_magic[] = { /* HP C2502 */
|
|
0x0f, 0x22, 0xf0, 0x20, 0x80
|
|
};
|
|
static int hp_c2502_irqs[] = {
|
|
9, 5, 7, 3, 4, -1
|
|
};
|
|
|
|
static int generic_NCR5380_init_one(struct scsi_host_template *tpnt,
|
|
struct device *pdev, int base, int irq, int board)
|
|
{
|
|
bool is_pmio = base <= 0xffff;
|
|
int ret;
|
|
int flags = 0;
|
|
unsigned int *ports = NULL;
|
|
u8 *magic = NULL;
|
|
int i;
|
|
int port_idx = -1;
|
|
unsigned long region_size;
|
|
struct Scsi_Host *instance;
|
|
struct NCR5380_hostdata *hostdata;
|
|
u8 __iomem *iomem;
|
|
|
|
switch (board) {
|
|
case BOARD_NCR5380:
|
|
flags = FLAG_NO_PSEUDO_DMA | FLAG_DMA_FIXUP;
|
|
break;
|
|
case BOARD_NCR53C400A:
|
|
ports = ncr_53c400a_ports;
|
|
magic = ncr_53c400a_magic;
|
|
break;
|
|
case BOARD_HP_C2502:
|
|
ports = ncr_53c400a_ports;
|
|
magic = hp_c2502_magic;
|
|
break;
|
|
case BOARD_DTC3181E:
|
|
ports = dtc_3181e_ports;
|
|
magic = ncr_53c400a_magic;
|
|
break;
|
|
}
|
|
|
|
if (is_pmio && ports && magic) {
|
|
/* wakeup sequence for the NCR53C400A and DTC3181E */
|
|
|
|
/* Disable the adapter and look for a free io port */
|
|
magic_configure(-1, 0, magic);
|
|
|
|
region_size = 16;
|
|
if (base)
|
|
for (i = 0; ports[i]; i++) {
|
|
if (base == ports[i]) { /* index found */
|
|
if (!request_region(ports[i],
|
|
region_size,
|
|
"ncr53c80"))
|
|
return -EBUSY;
|
|
break;
|
|
}
|
|
}
|
|
else
|
|
for (i = 0; ports[i]; i++) {
|
|
if (!request_region(ports[i], region_size,
|
|
"ncr53c80"))
|
|
continue;
|
|
if (inb(ports[i]) == 0xff)
|
|
break;
|
|
release_region(ports[i], region_size);
|
|
}
|
|
if (ports[i]) {
|
|
/* At this point we have our region reserved */
|
|
magic_configure(i, 0, magic); /* no IRQ yet */
|
|
base = ports[i];
|
|
outb(0xc0, base + 9);
|
|
if (inb(base + 9) != 0x80) {
|
|
ret = -ENODEV;
|
|
goto out_release;
|
|
}
|
|
port_idx = i;
|
|
} else
|
|
return -EINVAL;
|
|
} else if (is_pmio) {
|
|
/* NCR5380 - no configuration, just grab */
|
|
region_size = 8;
|
|
if (!base || !request_region(base, region_size, "ncr5380"))
|
|
return -EBUSY;
|
|
} else { /* MMIO */
|
|
region_size = NCR53C400_region_size;
|
|
if (!request_mem_region(base, region_size, "ncr5380"))
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (is_pmio)
|
|
iomem = ioport_map(base, region_size);
|
|
else
|
|
iomem = ioremap(base, region_size);
|
|
|
|
if (!iomem) {
|
|
ret = -ENOMEM;
|
|
goto out_release;
|
|
}
|
|
|
|
instance = scsi_host_alloc(tpnt, sizeof(struct NCR5380_hostdata));
|
|
if (instance == NULL) {
|
|
ret = -ENOMEM;
|
|
goto out_unmap;
|
|
}
|
|
hostdata = shost_priv(instance);
|
|
|
|
hostdata->board = board;
|
|
hostdata->io = iomem;
|
|
hostdata->region_size = region_size;
|
|
|
|
if (is_pmio) {
|
|
hostdata->io_port = base;
|
|
hostdata->io_width = 1; /* 8-bit PDMA by default */
|
|
hostdata->offset = 0;
|
|
|
|
/*
|
|
* On NCR53C400 boards, NCR5380 registers are mapped 8 past
|
|
* the base address.
|
|
*/
|
|
switch (board) {
|
|
case BOARD_NCR53C400:
|
|
hostdata->io_port += 8;
|
|
hostdata->c400_ctl_status = 0;
|
|
hostdata->c400_blk_cnt = 1;
|
|
hostdata->c400_host_buf = 4;
|
|
break;
|
|
case BOARD_DTC3181E:
|
|
hostdata->io_width = 2; /* 16-bit PDMA */
|
|
fallthrough;
|
|
case BOARD_NCR53C400A:
|
|
case BOARD_HP_C2502:
|
|
hostdata->c400_ctl_status = 9;
|
|
hostdata->c400_blk_cnt = 10;
|
|
hostdata->c400_host_buf = 8;
|
|
break;
|
|
}
|
|
} else {
|
|
hostdata->base = base;
|
|
hostdata->offset = NCR53C400_mem_base;
|
|
switch (board) {
|
|
case BOARD_NCR53C400:
|
|
hostdata->c400_ctl_status = 0x100;
|
|
hostdata->c400_blk_cnt = 0x101;
|
|
hostdata->c400_host_buf = 0x104;
|
|
break;
|
|
case BOARD_DTC3181E:
|
|
case BOARD_NCR53C400A:
|
|
case BOARD_HP_C2502:
|
|
pr_err(DRV_MODULE_NAME ": unknown register offsets\n");
|
|
ret = -EINVAL;
|
|
goto out_unregister;
|
|
}
|
|
}
|
|
|
|
/* Check for vacant slot */
|
|
NCR5380_write(MODE_REG, 0);
|
|
if (NCR5380_read(MODE_REG) != 0) {
|
|
ret = -ENODEV;
|
|
goto out_unregister;
|
|
}
|
|
|
|
ret = NCR5380_init(instance, flags | FLAG_LATE_DMA_SETUP);
|
|
if (ret)
|
|
goto out_unregister;
|
|
|
|
switch (board) {
|
|
case BOARD_NCR53C400:
|
|
case BOARD_DTC3181E:
|
|
case BOARD_NCR53C400A:
|
|
case BOARD_HP_C2502:
|
|
NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
|
|
}
|
|
|
|
NCR5380_maybe_reset_bus(instance);
|
|
|
|
/* Compatibility with documented NCR5380 kernel parameters */
|
|
if (irq == 255 || irq == 0)
|
|
irq = NO_IRQ;
|
|
else if (irq == -1)
|
|
irq = IRQ_AUTO;
|
|
|
|
if (board == BOARD_HP_C2502) {
|
|
int *irq_table = hp_c2502_irqs;
|
|
int board_irq = -1;
|
|
|
|
switch (irq) {
|
|
case NO_IRQ:
|
|
board_irq = 0;
|
|
break;
|
|
case IRQ_AUTO:
|
|
board_irq = legacy_find_free_irq(irq_table);
|
|
break;
|
|
default:
|
|
while (*irq_table != -1)
|
|
if (*irq_table++ == irq)
|
|
board_irq = irq;
|
|
}
|
|
|
|
if (board_irq <= 0) {
|
|
board_irq = 0;
|
|
irq = NO_IRQ;
|
|
}
|
|
|
|
magic_configure(port_idx, board_irq, magic);
|
|
}
|
|
|
|
if (irq == IRQ_AUTO) {
|
|
instance->irq = g_NCR5380_probe_irq(instance);
|
|
if (instance->irq == NO_IRQ)
|
|
shost_printk(KERN_INFO, instance, "no irq detected\n");
|
|
} else {
|
|
instance->irq = irq;
|
|
if (instance->irq == NO_IRQ)
|
|
shost_printk(KERN_INFO, instance, "no irq provided\n");
|
|
}
|
|
|
|
if (instance->irq != NO_IRQ) {
|
|
if (request_irq(instance->irq, generic_NCR5380_intr,
|
|
0, "NCR5380", instance)) {
|
|
instance->irq = NO_IRQ;
|
|
shost_printk(KERN_INFO, instance,
|
|
"irq %d denied\n", instance->irq);
|
|
} else {
|
|
shost_printk(KERN_INFO, instance,
|
|
"irq %d acquired\n", instance->irq);
|
|
}
|
|
}
|
|
|
|
ret = scsi_add_host(instance, pdev);
|
|
if (ret)
|
|
goto out_free_irq;
|
|
scsi_scan_host(instance);
|
|
dev_set_drvdata(pdev, instance);
|
|
return 0;
|
|
|
|
out_free_irq:
|
|
if (instance->irq != NO_IRQ)
|
|
free_irq(instance->irq, instance);
|
|
NCR5380_exit(instance);
|
|
out_unregister:
|
|
scsi_host_put(instance);
|
|
out_unmap:
|
|
iounmap(iomem);
|
|
out_release:
|
|
if (is_pmio)
|
|
release_region(base, region_size);
|
|
else
|
|
release_mem_region(base, region_size);
|
|
return ret;
|
|
}
|
|
|
|
static void generic_NCR5380_release_resources(struct Scsi_Host *instance)
|
|
{
|
|
struct NCR5380_hostdata *hostdata = shost_priv(instance);
|
|
void __iomem *iomem = hostdata->io;
|
|
unsigned long io_port = hostdata->io_port;
|
|
unsigned long base = hostdata->base;
|
|
unsigned long region_size = hostdata->region_size;
|
|
|
|
scsi_remove_host(instance);
|
|
if (instance->irq != NO_IRQ)
|
|
free_irq(instance->irq, instance);
|
|
NCR5380_exit(instance);
|
|
scsi_host_put(instance);
|
|
iounmap(iomem);
|
|
if (io_port)
|
|
release_region(io_port, region_size);
|
|
else
|
|
release_mem_region(base, region_size);
|
|
}
|
|
|
|
/* wait_for_53c80_access - wait for 53C80 registers to become accessible
|
|
* @hostdata: scsi host private data
|
|
*
|
|
* The registers within the 53C80 logic block are inaccessible until
|
|
* bit 7 in the 53C400 control status register gets asserted.
|
|
*/
|
|
|
|
static void wait_for_53c80_access(struct NCR5380_hostdata *hostdata)
|
|
{
|
|
int count = 10000;
|
|
|
|
do {
|
|
if (hostdata->board == BOARD_DTC3181E)
|
|
udelay(4); /* DTC436 chip hangs without this */
|
|
if (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)
|
|
return;
|
|
} while (--count > 0);
|
|
|
|
scmd_printk(KERN_ERR, hostdata->connected,
|
|
"53c80 registers not accessible, device will be reset\n");
|
|
NCR5380_write(hostdata->c400_ctl_status, CSR_RESET);
|
|
NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
|
|
}
|
|
|
|
/**
|
|
* generic_NCR5380_precv - pseudo DMA receive
|
|
* @hostdata: scsi host private data
|
|
* @dst: buffer to write into
|
|
* @len: transfer size
|
|
*
|
|
* Perform a pseudo DMA mode receive from a 53C400 or equivalent device.
|
|
*/
|
|
|
|
static inline int generic_NCR5380_precv(struct NCR5380_hostdata *hostdata,
|
|
unsigned char *dst, int len)
|
|
{
|
|
int residual;
|
|
int start = 0;
|
|
|
|
NCR5380_write(hostdata->c400_ctl_status, CSR_BASE | CSR_TRANS_DIR);
|
|
NCR5380_write(hostdata->c400_blk_cnt, len / 128);
|
|
|
|
do {
|
|
if (start == len - 128) {
|
|
/* Ignore End of DMA interrupt for the final buffer */
|
|
if (NCR5380_poll_politely(hostdata, hostdata->c400_ctl_status,
|
|
CSR_HOST_BUF_NOT_RDY, 0, 0) < 0)
|
|
break;
|
|
} else {
|
|
if (NCR5380_poll_politely2(hostdata, hostdata->c400_ctl_status,
|
|
CSR_HOST_BUF_NOT_RDY, 0,
|
|
hostdata->c400_ctl_status,
|
|
CSR_GATED_53C80_IRQ,
|
|
CSR_GATED_53C80_IRQ, 0) < 0 ||
|
|
NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
|
|
break;
|
|
}
|
|
|
|
if (hostdata->io_port && hostdata->io_width == 2)
|
|
insw(hostdata->io_port + hostdata->c400_host_buf,
|
|
dst + start, 64);
|
|
else if (hostdata->io_port)
|
|
insb(hostdata->io_port + hostdata->c400_host_buf,
|
|
dst + start, 128);
|
|
else
|
|
memcpy_fromio(dst + start,
|
|
hostdata->io + NCR53C400_host_buffer, 128);
|
|
start += 128;
|
|
} while (start < len);
|
|
|
|
residual = len - start;
|
|
|
|
if (residual != 0) {
|
|
/* 53c80 interrupt or transfer timeout. Reset 53c400 logic. */
|
|
NCR5380_write(hostdata->c400_ctl_status, CSR_RESET);
|
|
NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
|
|
}
|
|
wait_for_53c80_access(hostdata);
|
|
|
|
if (residual == 0 && NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG,
|
|
BASR_END_DMA_TRANSFER,
|
|
BASR_END_DMA_TRANSFER,
|
|
0) < 0)
|
|
scmd_printk(KERN_ERR, hostdata->connected, "%s: End of DMA timeout\n",
|
|
__func__);
|
|
|
|
hostdata->pdma_residual = residual;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* generic_NCR5380_psend - pseudo DMA send
|
|
* @hostdata: scsi host private data
|
|
* @src: buffer to read from
|
|
* @len: transfer size
|
|
*
|
|
* Perform a pseudo DMA mode send to a 53C400 or equivalent device.
|
|
*/
|
|
|
|
static inline int generic_NCR5380_psend(struct NCR5380_hostdata *hostdata,
|
|
unsigned char *src, int len)
|
|
{
|
|
int residual;
|
|
int start = 0;
|
|
|
|
NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
|
|
NCR5380_write(hostdata->c400_blk_cnt, len / 128);
|
|
|
|
do {
|
|
if (NCR5380_poll_politely2(hostdata, hostdata->c400_ctl_status,
|
|
CSR_HOST_BUF_NOT_RDY, 0,
|
|
hostdata->c400_ctl_status,
|
|
CSR_GATED_53C80_IRQ,
|
|
CSR_GATED_53C80_IRQ, 0) < 0 ||
|
|
NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY) {
|
|
/* Both 128 B buffers are in use */
|
|
if (start >= 128)
|
|
start -= 128;
|
|
if (start >= 128)
|
|
start -= 128;
|
|
break;
|
|
}
|
|
|
|
if (start >= len && NCR5380_read(hostdata->c400_blk_cnt) == 0)
|
|
break;
|
|
|
|
if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
|
|
/* Host buffer is empty, other one is in use */
|
|
if (start >= 128)
|
|
start -= 128;
|
|
break;
|
|
}
|
|
|
|
if (start >= len)
|
|
continue;
|
|
|
|
if (hostdata->io_port && hostdata->io_width == 2)
|
|
outsw(hostdata->io_port + hostdata->c400_host_buf,
|
|
src + start, 64);
|
|
else if (hostdata->io_port)
|
|
outsb(hostdata->io_port + hostdata->c400_host_buf,
|
|
src + start, 128);
|
|
else
|
|
memcpy_toio(hostdata->io + NCR53C400_host_buffer,
|
|
src + start, 128);
|
|
start += 128;
|
|
} while (1);
|
|
|
|
residual = len - start;
|
|
|
|
if (residual != 0) {
|
|
/* 53c80 interrupt or transfer timeout. Reset 53c400 logic. */
|
|
NCR5380_write(hostdata->c400_ctl_status, CSR_RESET);
|
|
NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
|
|
}
|
|
wait_for_53c80_access(hostdata);
|
|
|
|
if (residual == 0) {
|
|
if (NCR5380_poll_politely(hostdata, TARGET_COMMAND_REG,
|
|
TCR_LAST_BYTE_SENT, TCR_LAST_BYTE_SENT,
|
|
0) < 0)
|
|
scmd_printk(KERN_ERR, hostdata->connected,
|
|
"%s: Last Byte Sent timeout\n", __func__);
|
|
|
|
if (NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG,
|
|
BASR_END_DMA_TRANSFER, BASR_END_DMA_TRANSFER,
|
|
0) < 0)
|
|
scmd_printk(KERN_ERR, hostdata->connected, "%s: End of DMA timeout\n",
|
|
__func__);
|
|
}
|
|
|
|
hostdata->pdma_residual = residual;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int generic_NCR5380_dma_xfer_len(struct NCR5380_hostdata *hostdata,
|
|
struct scsi_cmnd *cmd)
|
|
{
|
|
int transfersize = NCR5380_to_ncmd(cmd)->this_residual;
|
|
|
|
if (hostdata->flags & FLAG_NO_PSEUDO_DMA)
|
|
return 0;
|
|
|
|
/* 53C400 datasheet: non-modulo-128-byte transfers should use PIO */
|
|
if (transfersize % 128)
|
|
return 0;
|
|
|
|
/* Limit PDMA send to 512 B to avoid random corruption on DTC3181E */
|
|
if (hostdata->board == BOARD_DTC3181E &&
|
|
cmd->sc_data_direction == DMA_TO_DEVICE)
|
|
transfersize = min(transfersize, 512);
|
|
|
|
return min(transfersize, DMA_MAX_SIZE);
|
|
}
|
|
|
|
static int generic_NCR5380_dma_residual(struct NCR5380_hostdata *hostdata)
|
|
{
|
|
return hostdata->pdma_residual;
|
|
}
|
|
|
|
/* Include the core driver code. */
|
|
|
|
#include "NCR5380.c"
|
|
|
|
static struct scsi_host_template driver_template = {
|
|
.module = THIS_MODULE,
|
|
.proc_name = DRV_MODULE_NAME,
|
|
.name = "Generic NCR5380/NCR53C400 SCSI",
|
|
.info = generic_NCR5380_info,
|
|
.queuecommand = generic_NCR5380_queue_command,
|
|
.eh_abort_handler = generic_NCR5380_abort,
|
|
.eh_host_reset_handler = generic_NCR5380_host_reset,
|
|
.can_queue = 16,
|
|
.this_id = 7,
|
|
.sg_tablesize = SG_ALL,
|
|
.cmd_per_lun = 2,
|
|
.dma_boundary = PAGE_SIZE - 1,
|
|
.cmd_size = sizeof(struct NCR5380_cmd),
|
|
.max_sectors = 128,
|
|
};
|
|
|
|
static int generic_NCR5380_isa_match(struct device *pdev, unsigned int ndev)
|
|
{
|
|
int ret = generic_NCR5380_init_one(&driver_template, pdev, base[ndev],
|
|
irq[ndev], card[ndev]);
|
|
if (ret) {
|
|
if (base[ndev])
|
|
printk(KERN_WARNING "Card not found at address 0x%03x\n",
|
|
base[ndev]);
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void generic_NCR5380_isa_remove(struct device *pdev,
|
|
unsigned int ndev)
|
|
{
|
|
generic_NCR5380_release_resources(dev_get_drvdata(pdev));
|
|
dev_set_drvdata(pdev, NULL);
|
|
}
|
|
|
|
static struct isa_driver generic_NCR5380_isa_driver = {
|
|
.match = generic_NCR5380_isa_match,
|
|
.remove = generic_NCR5380_isa_remove,
|
|
.driver = {
|
|
.name = DRV_MODULE_NAME
|
|
},
|
|
};
|
|
|
|
#ifdef CONFIG_PNP
|
|
static const struct pnp_device_id generic_NCR5380_pnp_ids[] = {
|
|
{ .id = "DTC436e", .driver_data = BOARD_DTC3181E },
|
|
{ .id = "" }
|
|
};
|
|
MODULE_DEVICE_TABLE(pnp, generic_NCR5380_pnp_ids);
|
|
|
|
static int generic_NCR5380_pnp_probe(struct pnp_dev *pdev,
|
|
const struct pnp_device_id *id)
|
|
{
|
|
int base, irq;
|
|
|
|
if (pnp_activate_dev(pdev) < 0)
|
|
return -EBUSY;
|
|
|
|
base = pnp_port_start(pdev, 0);
|
|
irq = pnp_irq(pdev, 0);
|
|
|
|
return generic_NCR5380_init_one(&driver_template, &pdev->dev, base, irq,
|
|
id->driver_data);
|
|
}
|
|
|
|
static void generic_NCR5380_pnp_remove(struct pnp_dev *pdev)
|
|
{
|
|
generic_NCR5380_release_resources(pnp_get_drvdata(pdev));
|
|
pnp_set_drvdata(pdev, NULL);
|
|
}
|
|
|
|
static struct pnp_driver generic_NCR5380_pnp_driver = {
|
|
.name = DRV_MODULE_NAME,
|
|
.id_table = generic_NCR5380_pnp_ids,
|
|
.probe = generic_NCR5380_pnp_probe,
|
|
.remove = generic_NCR5380_pnp_remove,
|
|
};
|
|
#endif /* defined(CONFIG_PNP) */
|
|
|
|
static int pnp_registered, isa_registered;
|
|
|
|
static int __init generic_NCR5380_init(void)
|
|
{
|
|
int ret = 0;
|
|
|
|
/* compatibility with old-style parameters */
|
|
if (irq[0] == -1 && base[0] == 0 && card[0] == -1) {
|
|
irq[0] = ncr_irq;
|
|
base[0] = ncr_addr;
|
|
if (ncr_5380)
|
|
card[0] = BOARD_NCR5380;
|
|
if (ncr_53c400)
|
|
card[0] = BOARD_NCR53C400;
|
|
if (ncr_53c400a)
|
|
card[0] = BOARD_NCR53C400A;
|
|
if (dtc_3181e)
|
|
card[0] = BOARD_DTC3181E;
|
|
if (hp_c2502)
|
|
card[0] = BOARD_HP_C2502;
|
|
}
|
|
|
|
#ifdef CONFIG_PNP
|
|
if (!pnp_register_driver(&generic_NCR5380_pnp_driver))
|
|
pnp_registered = 1;
|
|
#endif
|
|
ret = isa_register_driver(&generic_NCR5380_isa_driver, MAX_CARDS);
|
|
if (!ret)
|
|
isa_registered = 1;
|
|
|
|
return (pnp_registered || isa_registered) ? 0 : ret;
|
|
}
|
|
|
|
static void __exit generic_NCR5380_exit(void)
|
|
{
|
|
#ifdef CONFIG_PNP
|
|
if (pnp_registered)
|
|
pnp_unregister_driver(&generic_NCR5380_pnp_driver);
|
|
#endif
|
|
if (isa_registered)
|
|
isa_unregister_driver(&generic_NCR5380_isa_driver);
|
|
}
|
|
|
|
module_init(generic_NCR5380_init);
|
|
module_exit(generic_NCR5380_exit);
|