korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-28 06:34:12 +08:00
Code Issues Packages Projects Releases Wiki Activity
49cb894d56
linux/drivers/rtc/rtc-ab8500.c
Uwe Kleine-König 8a700af1ba rtc: ab8500: Convert to platform remove callback returning void 
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230304133028.2135435-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-03-17 23:03:16 +01:00

415 lines
10 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) ST-Ericsson SA 2010
*
* Author: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
*
* RTC clock driver for the RTC part of the AB8500 Power management chip.
* Based on RTC clock driver for the AB3100 Analog Baseband Chip by
* Linus Walleij <linus.walleij@stericsson.com>
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/rtc.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/delay.h>
#include <linux/of.h>
#include <linux/pm_wakeirq.h>
#define AB8500_RTC_SOFF_STAT_REG 0x00
#define AB8500_RTC_CC_CONF_REG 0x01
#define AB8500_RTC_READ_REQ_REG 0x02
#define AB8500_RTC_WATCH_TSECMID_REG 0x03
#define AB8500_RTC_WATCH_TSECHI_REG 0x04
#define AB8500_RTC_WATCH_TMIN_LOW_REG 0x05
#define AB8500_RTC_WATCH_TMIN_MID_REG 0x06
#define AB8500_RTC_WATCH_TMIN_HI_REG 0x07
#define AB8500_RTC_ALRM_MIN_LOW_REG 0x08
#define AB8500_RTC_ALRM_MIN_MID_REG 0x09
#define AB8500_RTC_ALRM_MIN_HI_REG 0x0A
#define AB8500_RTC_STAT_REG 0x0B
#define AB8500_RTC_BKUP_CHG_REG 0x0C
#define AB8500_RTC_FORCE_BKUP_REG 0x0D
#define AB8500_RTC_CALIB_REG 0x0E
#define AB8500_RTC_SWITCH_STAT_REG 0x0F
/* RtcReadRequest bits */
#define RTC_READ_REQUEST 0x01
#define RTC_WRITE_REQUEST 0x02
/* RtcCtrl bits */
#define RTC_ALARM_ENA 0x04
#define RTC_STATUS_DATA 0x01
#define COUNTS_PER_SEC (0xF000 / 60)
static const u8 ab8500_rtc_time_regs[] = {
AB8500_RTC_WATCH_TMIN_HI_REG, AB8500_RTC_WATCH_TMIN_MID_REG,
AB8500_RTC_WATCH_TMIN_LOW_REG, AB8500_RTC_WATCH_TSECHI_REG,
AB8500_RTC_WATCH_TSECMID_REG
};
static const u8 ab8500_rtc_alarm_regs[] = {
AB8500_RTC_ALRM_MIN_HI_REG, AB8500_RTC_ALRM_MIN_MID_REG,
AB8500_RTC_ALRM_MIN_LOW_REG
};
static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
unsigned long timeout = jiffies + HZ;
int retval, i;
unsigned long mins, secs;
unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
u8 value;
/* Request a data read */
retval = abx500_set_register_interruptible(dev,
AB8500_RTC, AB8500_RTC_READ_REQ_REG, RTC_READ_REQUEST);
if (retval < 0)
return retval;
/* Wait for some cycles after enabling the rtc read in ab8500 */
while (time_before(jiffies, timeout)) {
retval = abx500_get_register_interruptible(dev,
AB8500_RTC, AB8500_RTC_READ_REQ_REG, &value);
if (retval < 0)
return retval;
if (!(value & RTC_READ_REQUEST))
break;
usleep_range(1000, 5000);
}
/* Read the Watchtime registers */
for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
retval = abx500_get_register_interruptible(dev,
AB8500_RTC, ab8500_rtc_time_regs[i], &value);
if (retval < 0)
return retval;
buf[i] = value;
}
mins = (buf[0] << 16) | (buf[1] << 8) | buf[2];
secs = (buf[3] << 8) | buf[4];
secs = secs / COUNTS_PER_SEC;
secs = secs + (mins * 60);
rtc_time64_to_tm(secs, tm);
return 0;
}
static int ab8500_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
int retval, i;
unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
unsigned long no_secs, no_mins, secs = 0;
secs = rtc_tm_to_time64(tm);
no_mins = secs / 60;
no_secs = secs % 60;
/* Make the seconds count as per the RTC resolution */
no_secs = no_secs * COUNTS_PER_SEC;
buf[4] = no_secs & 0xFF;
buf[3] = (no_secs >> 8) & 0xFF;
buf[2] = no_mins & 0xFF;
buf[1] = (no_mins >> 8) & 0xFF;
buf[0] = (no_mins >> 16) & 0xFF;
for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
retval = abx500_set_register_interruptible(dev, AB8500_RTC,
ab8500_rtc_time_regs[i], buf[i]);
if (retval < 0)
return retval;
}
/* Request a data write */
return abx500_set_register_interruptible(dev, AB8500_RTC,
AB8500_RTC_READ_REQ_REG, RTC_WRITE_REQUEST);
}
static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
int retval, i;
u8 rtc_ctrl, value;
unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
unsigned long secs, mins;
/* Check if the alarm is enabled or not */
retval = abx500_get_register_interruptible(dev, AB8500_RTC,
AB8500_RTC_STAT_REG, &rtc_ctrl);
if (retval < 0)
return retval;
if (rtc_ctrl & RTC_ALARM_ENA)
alarm->enabled = 1;
else
alarm->enabled = 0;
alarm->pending = 0;
for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
retval = abx500_get_register_interruptible(dev, AB8500_RTC,
ab8500_rtc_alarm_regs[i], &value);
if (retval < 0)
return retval;
buf[i] = value;
}
mins = (buf[0] << 16) | (buf[1] << 8) | (buf[2]);
secs = mins * 60;
rtc_time64_to_tm(secs, &alarm->time);
return 0;
}
static int ab8500_rtc_irq_enable(struct device *dev, unsigned int enabled)
{
return abx500_mask_and_set_register_interruptible(dev, AB8500_RTC,
AB8500_RTC_STAT_REG, RTC_ALARM_ENA,
enabled ? RTC_ALARM_ENA : 0);
}
static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
int retval, i;
unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
unsigned long mins;
mins = (unsigned long)rtc_tm_to_time64(&alarm->time) / 60;
buf[2] = mins & 0xFF;
buf[1] = (mins >> 8) & 0xFF;
buf[0] = (mins >> 16) & 0xFF;
/* Set the alarm time */
for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
retval = abx500_set_register_interruptible(dev, AB8500_RTC,
ab8500_rtc_alarm_regs[i], buf[i]);
if (retval < 0)
return retval;
}
return ab8500_rtc_irq_enable(dev, alarm->enabled);
}
static int ab8500_rtc_set_calibration(struct device *dev, int calibration)
{
int retval;
u8 rtccal = 0;
/*
* Check that the calibration value (which is in units of 0.5
* parts-per-million) is in the AB8500's range for RtcCalibration
* register. -128 (0x80) is not permitted because the AB8500 uses
* a sign-bit rather than two's complement, so 0x80 is just another
* representation of zero.
*/
if ((calibration < -127) || (calibration > 127)) {
dev_err(dev, "RtcCalibration value outside permitted range\n");
return -EINVAL;
}
/*
* The AB8500 uses sign (in bit7) and magnitude (in bits0-7)
* so need to convert to this sort of representation before writing
* into RtcCalibration register...
*/
if (calibration >= 0)
rtccal = 0x7F & calibration;
else
rtccal = ~(calibration - 1) | 0x80;
retval = abx500_set_register_interruptible(dev, AB8500_RTC,
AB8500_RTC_CALIB_REG, rtccal);
return retval;
}
static int ab8500_rtc_get_calibration(struct device *dev, int *calibration)
{
int retval;
u8 rtccal = 0;
retval = abx500_get_register_interruptible(dev, AB8500_RTC,
AB8500_RTC_CALIB_REG, &rtccal);
if (retval >= 0) {
/*
* The AB8500 uses sign (in bit7) and magnitude (in bits0-7)
* so need to convert value from RtcCalibration register into
* a two's complement signed value...
*/
if (rtccal & 0x80)
*calibration = 0 - (rtccal & 0x7F);
else
*calibration = 0x7F & rtccal;
}
return retval;
}
static ssize_t ab8500_sysfs_store_rtc_calibration(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int retval;
int calibration = 0;
if (sscanf(buf, " %i ", &calibration) != 1) {
dev_err(dev, "Failed to store RTC calibration attribute\n");
return -EINVAL;
}
retval = ab8500_rtc_set_calibration(dev, calibration);
return retval ? retval : count;
}
static ssize_t ab8500_sysfs_show_rtc_calibration(struct device *dev,
struct device_attribute *attr, char *buf)
{
int retval = 0;
int calibration = 0;
retval = ab8500_rtc_get_calibration(dev, &calibration);
if (retval < 0) {
dev_err(dev, "Failed to read RTC calibration attribute\n");
sprintf(buf, "0\n");
return retval;
}
return sprintf(buf, "%d\n", calibration);
}
static DEVICE_ATTR(rtc_calibration, S_IRUGO | S_IWUSR,
ab8500_sysfs_show_rtc_calibration,
ab8500_sysfs_store_rtc_calibration);
static struct attribute *ab8500_rtc_attrs[] = {
&dev_attr_rtc_calibration.attr,
NULL
};
static const struct attribute_group ab8500_rtc_sysfs_files = {
.attrs = ab8500_rtc_attrs,
};
static irqreturn_t rtc_alarm_handler(int irq, void *data)
{
struct rtc_device *rtc = data;
unsigned long events = RTC_IRQF | RTC_AF;
dev_dbg(&rtc->dev, "%s\n", __func__);
rtc_update_irq(rtc, 1, events);
return IRQ_HANDLED;
}
static const struct rtc_class_ops ab8500_rtc_ops = {
.read_time = ab8500_rtc_read_time,
.set_time = ab8500_rtc_set_time,
.read_alarm = ab8500_rtc_read_alarm,
.set_alarm = ab8500_rtc_set_alarm,
.alarm_irq_enable = ab8500_rtc_irq_enable,
};
static const struct platform_device_id ab85xx_rtc_ids[] = {
{ "ab8500-rtc", (kernel_ulong_t)&ab8500_rtc_ops, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(platform, ab85xx_rtc_ids);
static int ab8500_rtc_probe(struct platform_device *pdev)
{
const struct platform_device_id *platid = platform_get_device_id(pdev);
int err;
struct rtc_device *rtc;
u8 rtc_ctrl;
int irq;
irq = platform_get_irq_byname(pdev, "ALARM");
if (irq < 0)
return irq;
/* For RTC supply test */
err = abx500_mask_and_set_register_interruptible(&pdev->dev, AB8500_RTC,
AB8500_RTC_STAT_REG, RTC_STATUS_DATA, RTC_STATUS_DATA);
if (err < 0)
return err;
/* Wait for reset by the PorRtc */
usleep_range(1000, 5000);
err = abx500_get_register_interruptible(&pdev->dev, AB8500_RTC,
AB8500_RTC_STAT_REG, &rtc_ctrl);
if (err < 0)
return err;
/* Check if the RTC Supply fails */
if (!(rtc_ctrl & RTC_STATUS_DATA)) {
dev_err(&pdev->dev, "RTC supply failure\n");
return -ENODEV;
}
device_init_wakeup(&pdev->dev, true);
rtc = devm_rtc_allocate_device(&pdev->dev);
if (IS_ERR(rtc))
return PTR_ERR(rtc);
rtc->ops = (struct rtc_class_ops *)platid->driver_data;
err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
rtc_alarm_handler, IRQF_ONESHOT,
"ab8500-rtc", rtc);
if (err < 0)
return err;
dev_pm_set_wake_irq(&pdev->dev, irq);
platform_set_drvdata(pdev, rtc);
set_bit(RTC_FEATURE_ALARM_RES_MINUTE, rtc->features);
clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, rtc->features);
rtc->range_max = (1ULL << 24) * 60 - 1; // 24-bit minutes + 59 secs
rtc->start_secs = RTC_TIMESTAMP_BEGIN_2000;
rtc->set_start_time = true;
err = rtc_add_group(rtc, &ab8500_rtc_sysfs_files);
if (err)
return err;
return devm_rtc_register_device(rtc);
}
static void ab8500_rtc_remove(struct platform_device *pdev)
{
dev_pm_clear_wake_irq(&pdev->dev);
device_init_wakeup(&pdev->dev, false);
}
static struct platform_driver ab8500_rtc_driver = {
.driver = {
.name = "ab8500-rtc",
},
.probe = ab8500_rtc_probe,
.remove_new = ab8500_rtc_remove,
.id_table = ab85xx_rtc_ids,
};
module_platform_driver(ab8500_rtc_driver);
MODULE_AUTHOR("Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>");
MODULE_DESCRIPTION("AB8500 RTC Driver");
MODULE_LICENSE("GPL v2");
Reference in New Issue View Git Blame Copy Permalink