linux/drivers/acpi/acpica/hwgpe.c
Bob Moore fbb7a2dc2b ACPICA: Update ACPICA copyrights to 2014.
Update ACPICA copyrights to 2014. Includes all source headers and
signons for the various tools.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-11 00:30:25 +01:00

484 lines
13 KiB
C

/******************************************************************************
*
* Module Name: hwgpe - Low level GPE enable/disable/clear functions
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2014, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acevents.h"
#define _COMPONENT ACPI_HARDWARE
ACPI_MODULE_NAME("hwgpe")
#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
/* Local prototypes */
static acpi_status
acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
struct acpi_gpe_block_info *gpe_block,
void *context);
/******************************************************************************
*
* FUNCTION: acpi_hw_get_gpe_register_bit
*
* PARAMETERS: gpe_event_info - Info block for the GPE
*
* RETURN: Register mask with a one in the GPE bit position
*
* DESCRIPTION: Compute the register mask for this GPE. One bit is set in the
* correct position for the input GPE.
*
******************************************************************************/
u32 acpi_hw_get_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info)
{
return ((u32)1 <<
(gpe_event_info->gpe_number -
gpe_event_info->register_info->base_gpe_number));
}
/******************************************************************************
*
* FUNCTION: acpi_hw_low_set_gpe
*
* PARAMETERS: gpe_event_info - Info block for the GPE to be disabled
* action - Enable or disable
*
* RETURN: Status
*
* DESCRIPTION: Enable or disable a single GPE in the parent enable register.
*
******************************************************************************/
acpi_status
acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u32 action)
{
struct acpi_gpe_register_info *gpe_register_info;
acpi_status status;
u32 enable_mask;
u32 register_bit;
ACPI_FUNCTION_ENTRY();
/* Get the info block for the entire GPE register */
gpe_register_info = gpe_event_info->register_info;
if (!gpe_register_info) {
return (AE_NOT_EXIST);
}
/* Get current value of the enable register that contains this GPE */
status = acpi_hw_read(&enable_mask, &gpe_register_info->enable_address);
if (ACPI_FAILURE(status)) {
return (status);
}
/* Set or clear just the bit that corresponds to this GPE */
register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
switch (action) {
case ACPI_GPE_CONDITIONAL_ENABLE:
/* Only enable if the enable_for_run bit is set */
if (!(register_bit & gpe_register_info->enable_for_run)) {
return (AE_BAD_PARAMETER);
}
/*lint -fallthrough */
case ACPI_GPE_ENABLE:
ACPI_SET_BIT(enable_mask, register_bit);
break;
case ACPI_GPE_DISABLE:
ACPI_CLEAR_BIT(enable_mask, register_bit);
break;
default:
ACPI_ERROR((AE_INFO, "Invalid GPE Action, %u", action));
return (AE_BAD_PARAMETER);
}
/* Write the updated enable mask */
status = acpi_hw_write(enable_mask, &gpe_register_info->enable_address);
return (status);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_clear_gpe
*
* PARAMETERS: gpe_event_info - Info block for the GPE to be cleared
*
* RETURN: Status
*
* DESCRIPTION: Clear the status bit for a single GPE.
*
******************************************************************************/
acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info)
{
struct acpi_gpe_register_info *gpe_register_info;
acpi_status status;
u32 register_bit;
ACPI_FUNCTION_ENTRY();
/* Get the info block for the entire GPE register */
gpe_register_info = gpe_event_info->register_info;
if (!gpe_register_info) {
return (AE_NOT_EXIST);
}
/*
* Write a one to the appropriate bit in the status register to
* clear this GPE.
*/
register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
status = acpi_hw_write(register_bit,
&gpe_register_info->status_address);
return (status);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_get_gpe_status
*
* PARAMETERS: gpe_event_info - Info block for the GPE to queried
* event_status - Where the GPE status is returned
*
* RETURN: Status
*
* DESCRIPTION: Return the status of a single GPE.
*
******************************************************************************/
acpi_status
acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info,
acpi_event_status * event_status)
{
u32 in_byte;
u32 register_bit;
struct acpi_gpe_register_info *gpe_register_info;
acpi_event_status local_event_status = 0;
acpi_status status;
ACPI_FUNCTION_ENTRY();
if (!event_status) {
return (AE_BAD_PARAMETER);
}
/* Get the info block for the entire GPE register */
gpe_register_info = gpe_event_info->register_info;
/* Get the register bitmask for this GPE */
register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
/* GPE currently enabled? (enabled for runtime?) */
if (register_bit & gpe_register_info->enable_for_run) {
local_event_status |= ACPI_EVENT_FLAG_ENABLED;
}
/* GPE enabled for wake? */
if (register_bit & gpe_register_info->enable_for_wake) {
local_event_status |= ACPI_EVENT_FLAG_WAKE_ENABLED;
}
/* GPE currently active (status bit == 1)? */
status = acpi_hw_read(&in_byte, &gpe_register_info->status_address);
if (ACPI_FAILURE(status)) {
return (status);
}
if (register_bit & in_byte) {
local_event_status |= ACPI_EVENT_FLAG_SET;
}
/* Set return value */
(*event_status) = local_event_status;
return (AE_OK);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_disable_gpe_block
*
* PARAMETERS: gpe_xrupt_info - GPE Interrupt info
* gpe_block - Gpe Block info
*
* RETURN: Status
*
* DESCRIPTION: Disable all GPEs within a single GPE block
*
******************************************************************************/
acpi_status
acpi_hw_disable_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
struct acpi_gpe_block_info *gpe_block, void *context)
{
u32 i;
acpi_status status;
/* Examine each GPE Register within the block */
for (i = 0; i < gpe_block->register_count; i++) {
/* Disable all GPEs in this register */
status =
acpi_hw_write(0x00,
&gpe_block->register_info[i].enable_address);
if (ACPI_FAILURE(status)) {
return (status);
}
}
return (AE_OK);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_clear_gpe_block
*
* PARAMETERS: gpe_xrupt_info - GPE Interrupt info
* gpe_block - Gpe Block info
*
* RETURN: Status
*
* DESCRIPTION: Clear status bits for all GPEs within a single GPE block
*
******************************************************************************/
acpi_status
acpi_hw_clear_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
struct acpi_gpe_block_info *gpe_block, void *context)
{
u32 i;
acpi_status status;
/* Examine each GPE Register within the block */
for (i = 0; i < gpe_block->register_count; i++) {
/* Clear status on all GPEs in this register */
status =
acpi_hw_write(0xFF,
&gpe_block->register_info[i].status_address);
if (ACPI_FAILURE(status)) {
return (status);
}
}
return (AE_OK);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_enable_runtime_gpe_block
*
* PARAMETERS: gpe_xrupt_info - GPE Interrupt info
* gpe_block - Gpe Block info
*
* RETURN: Status
*
* DESCRIPTION: Enable all "runtime" GPEs within a single GPE block. Includes
* combination wake/run GPEs.
*
******************************************************************************/
acpi_status
acpi_hw_enable_runtime_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
struct acpi_gpe_block_info * gpe_block,
void *context)
{
u32 i;
acpi_status status;
/* NOTE: assumes that all GPEs are currently disabled */
/* Examine each GPE Register within the block */
for (i = 0; i < gpe_block->register_count; i++) {
if (!gpe_block->register_info[i].enable_for_run) {
continue;
}
/* Enable all "runtime" GPEs in this register */
status =
acpi_hw_write(gpe_block->register_info[i].enable_for_run,
&gpe_block->register_info[i].enable_address);
if (ACPI_FAILURE(status)) {
return (status);
}
}
return (AE_OK);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_enable_wakeup_gpe_block
*
* PARAMETERS: gpe_xrupt_info - GPE Interrupt info
* gpe_block - Gpe Block info
*
* RETURN: Status
*
* DESCRIPTION: Enable all "wake" GPEs within a single GPE block. Includes
* combination wake/run GPEs.
*
******************************************************************************/
static acpi_status
acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
struct acpi_gpe_block_info *gpe_block,
void *context)
{
u32 i;
acpi_status status;
/* Examine each GPE Register within the block */
for (i = 0; i < gpe_block->register_count; i++) {
if (!gpe_block->register_info[i].enable_for_wake) {
continue;
}
/* Enable all "wake" GPEs in this register */
status =
acpi_hw_write(gpe_block->register_info[i].enable_for_wake,
&gpe_block->register_info[i].enable_address);
if (ACPI_FAILURE(status)) {
return (status);
}
}
return (AE_OK);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_disable_all_gpes
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Disable and clear all GPEs in all GPE blocks
*
******************************************************************************/
acpi_status acpi_hw_disable_all_gpes(void)
{
acpi_status status;
ACPI_FUNCTION_TRACE(hw_disable_all_gpes);
status = acpi_ev_walk_gpe_list(acpi_hw_disable_gpe_block, NULL);
status = acpi_ev_walk_gpe_list(acpi_hw_clear_gpe_block, NULL);
return_ACPI_STATUS(status);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_enable_all_runtime_gpes
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Enable all "runtime" GPEs, in all GPE blocks
*
******************************************************************************/
acpi_status acpi_hw_enable_all_runtime_gpes(void)
{
acpi_status status;
ACPI_FUNCTION_TRACE(hw_enable_all_runtime_gpes);
status = acpi_ev_walk_gpe_list(acpi_hw_enable_runtime_gpe_block, NULL);
return_ACPI_STATUS(status);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_enable_all_wakeup_gpes
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Enable all "wakeup" GPEs, in all GPE blocks
*
******************************************************************************/
acpi_status acpi_hw_enable_all_wakeup_gpes(void)
{
acpi_status status;
ACPI_FUNCTION_TRACE(hw_enable_all_wakeup_gpes);
status = acpi_ev_walk_gpe_list(acpi_hw_enable_wakeup_gpe_block, NULL);
return_ACPI_STATUS(status);
}
#endif /* !ACPI_REDUCED_HARDWARE */