Vivek Gautam d8c80bb3b5 phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800 ... Adding phy calibration sequence for USB 3.0 DRD PHY present on Exynos5420/5800 systems. This calibration facilitates setting certain PHY parameters viz. the Loss-of-Signal (LOS) Detector Threshold Level, as well as Tx-Vboost-Level for Super-Speed operations. Additionally we also set proper time to wait for RxDetect measurement, for desired PHY reference clock, so as to solve issue with enumeration of few USB 3.0 devices, like Samsung SUM-TSB16S 3.0 USB drive on the controller. We are using CR_port for this purpose to send required data to override the LOS values. On testing with USB 3.0 devices on USB 3.0 port present on SMDK5420, and peach-pit boards should see following message: usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd and without this patch, should see below shown message: usb 1-1: new high-speed USB device number 2 using xhci-hcd [Also removed unnecessary extra lines in the register macro definitions] Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> [adapted to use phy_calibrate as entry point] Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>		2017-12-29 13:00:35 +05:30
..
Kconfig
Makefile	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00
phy-exynos4x12-usb2.c
phy-exynos5-usbdrd.c	phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800	2017-12-29 13:00:35 +05:30
phy-exynos4210-usb2.c
phy-exynos5250-sata.c
phy-exynos5250-usb2.c
phy-exynos-dp-video.c
phy-exynos-mipi-video.c
phy-exynos-pcie.c
phy-s5pv210-usb2.c
phy-samsung-usb2.c
phy-samsung-usb2.h