mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 01:54:09 +08:00
676c002af6
The control for +5V Power detection must also be updated when the EDID is not present. Signed-off-by: Mats Randgaard <matrandg@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
1964 lines
52 KiB
C
1964 lines
52 KiB
C
/*
|
|
* tc358743 - Toshiba HDMI to CSI-2 bridge
|
|
*
|
|
* Copyright 2015 Cisco Systems, Inc. and/or its affiliates. All rights
|
|
* reserved.
|
|
*
|
|
* This program is free software; you may redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
|
|
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
|
|
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
|
|
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
|
* SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* References (c = chapter, p = page):
|
|
* REF_01 - Toshiba, TC358743XBG (H2C), Functional Specification, Rev 0.60
|
|
* REF_02 - Toshiba, TC358743XBG_HDMI-CSI_Tv11p_nm.xls
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/videodev2.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/v4l2-dv-timings.h>
|
|
#include <linux/hdmi.h>
|
|
#include <media/v4l2-dv-timings.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-event.h>
|
|
#include <media/v4l2-of.h>
|
|
#include <media/i2c/tc358743.h>
|
|
|
|
#include "tc358743_regs.h"
|
|
|
|
static int debug;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "debug level (0-3)");
|
|
|
|
MODULE_DESCRIPTION("Toshiba TC358743 HDMI to CSI-2 bridge driver");
|
|
MODULE_AUTHOR("Ramakrishnan Muthukrishnan <ram@rkrishnan.org>");
|
|
MODULE_AUTHOR("Mikhail Khelik <mkhelik@cisco.com>");
|
|
MODULE_AUTHOR("Mats Randgaard <matrandg@cisco.com>");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
#define EDID_NUM_BLOCKS_MAX 8
|
|
#define EDID_BLOCK_SIZE 128
|
|
|
|
#define I2C_MAX_XFER_SIZE (EDID_BLOCK_SIZE + 2)
|
|
|
|
static const struct v4l2_dv_timings_cap tc358743_timings_cap = {
|
|
.type = V4L2_DV_BT_656_1120,
|
|
/* keep this initialization for compatibility with GCC < 4.4.6 */
|
|
.reserved = { 0 },
|
|
/* Pixel clock from REF_01 p. 20. Min/max height/width are unknown */
|
|
V4L2_INIT_BT_TIMINGS(1, 10000, 1, 10000, 0, 165000000,
|
|
V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
|
|
V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
|
|
V4L2_DV_BT_CAP_PROGRESSIVE |
|
|
V4L2_DV_BT_CAP_REDUCED_BLANKING |
|
|
V4L2_DV_BT_CAP_CUSTOM)
|
|
};
|
|
|
|
struct tc358743_state {
|
|
struct tc358743_platform_data pdata;
|
|
struct v4l2_of_bus_mipi_csi2 bus;
|
|
struct v4l2_subdev sd;
|
|
struct media_pad pad;
|
|
struct v4l2_ctrl_handler hdl;
|
|
struct i2c_client *i2c_client;
|
|
/* CONFCTL is modified in ops and tc358743_hdmi_sys_int_handler */
|
|
struct mutex confctl_mutex;
|
|
|
|
/* controls */
|
|
struct v4l2_ctrl *detect_tx_5v_ctrl;
|
|
struct v4l2_ctrl *audio_sampling_rate_ctrl;
|
|
struct v4l2_ctrl *audio_present_ctrl;
|
|
|
|
struct delayed_work delayed_work_enable_hotplug;
|
|
|
|
/* edid */
|
|
u8 edid_blocks_written;
|
|
|
|
struct v4l2_dv_timings timings;
|
|
u32 mbus_fmt_code;
|
|
u8 csi_lanes_in_use;
|
|
|
|
struct gpio_desc *reset_gpio;
|
|
};
|
|
|
|
static void tc358743_enable_interrupts(struct v4l2_subdev *sd,
|
|
bool cable_connected);
|
|
static int tc358743_s_ctrl_detect_tx_5v(struct v4l2_subdev *sd);
|
|
|
|
static inline struct tc358743_state *to_state(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct tc358743_state, sd);
|
|
}
|
|
|
|
/* --------------- I2C --------------- */
|
|
|
|
static void i2c_rd(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
struct i2c_client *client = state->i2c_client;
|
|
int err;
|
|
u8 buf[2] = { reg >> 8, reg & 0xff };
|
|
struct i2c_msg msgs[] = {
|
|
{
|
|
.addr = client->addr,
|
|
.flags = 0,
|
|
.len = 2,
|
|
.buf = buf,
|
|
},
|
|
{
|
|
.addr = client->addr,
|
|
.flags = I2C_M_RD,
|
|
.len = n,
|
|
.buf = values,
|
|
},
|
|
};
|
|
|
|
err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
|
|
if (err != ARRAY_SIZE(msgs)) {
|
|
v4l2_err(sd, "%s: reading register 0x%x from 0x%x failed\n",
|
|
__func__, reg, client->addr);
|
|
}
|
|
}
|
|
|
|
static void i2c_wr(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
struct i2c_client *client = state->i2c_client;
|
|
int err, i;
|
|
struct i2c_msg msg;
|
|
u8 data[I2C_MAX_XFER_SIZE];
|
|
|
|
if ((2 + n) > I2C_MAX_XFER_SIZE) {
|
|
n = I2C_MAX_XFER_SIZE - 2;
|
|
v4l2_warn(sd, "i2c wr reg=%04x: len=%d is too big!\n",
|
|
reg, 2 + n);
|
|
}
|
|
|
|
msg.addr = client->addr;
|
|
msg.buf = data;
|
|
msg.len = 2 + n;
|
|
msg.flags = 0;
|
|
|
|
data[0] = reg >> 8;
|
|
data[1] = reg & 0xff;
|
|
|
|
for (i = 0; i < n; i++)
|
|
data[2 + i] = values[i];
|
|
|
|
err = i2c_transfer(client->adapter, &msg, 1);
|
|
if (err != 1) {
|
|
v4l2_err(sd, "%s: writing register 0x%x from 0x%x failed\n",
|
|
__func__, reg, client->addr);
|
|
return;
|
|
}
|
|
|
|
if (debug < 3)
|
|
return;
|
|
|
|
switch (n) {
|
|
case 1:
|
|
v4l2_info(sd, "I2C write 0x%04x = 0x%02x",
|
|
reg, data[2]);
|
|
break;
|
|
case 2:
|
|
v4l2_info(sd, "I2C write 0x%04x = 0x%02x%02x",
|
|
reg, data[3], data[2]);
|
|
break;
|
|
case 4:
|
|
v4l2_info(sd, "I2C write 0x%04x = 0x%02x%02x%02x%02x",
|
|
reg, data[5], data[4], data[3], data[2]);
|
|
break;
|
|
default:
|
|
v4l2_info(sd, "I2C write %d bytes from address 0x%04x\n",
|
|
n, reg);
|
|
}
|
|
}
|
|
|
|
static u8 i2c_rd8(struct v4l2_subdev *sd, u16 reg)
|
|
{
|
|
u8 val;
|
|
|
|
i2c_rd(sd, reg, &val, 1);
|
|
|
|
return val;
|
|
}
|
|
|
|
static void i2c_wr8(struct v4l2_subdev *sd, u16 reg, u8 val)
|
|
{
|
|
i2c_wr(sd, reg, &val, 1);
|
|
}
|
|
|
|
static void i2c_wr8_and_or(struct v4l2_subdev *sd, u16 reg,
|
|
u8 mask, u8 val)
|
|
{
|
|
i2c_wr8(sd, reg, (i2c_rd8(sd, reg) & mask) | val);
|
|
}
|
|
|
|
static u16 i2c_rd16(struct v4l2_subdev *sd, u16 reg)
|
|
{
|
|
u16 val;
|
|
|
|
i2c_rd(sd, reg, (u8 *)&val, 2);
|
|
|
|
return val;
|
|
}
|
|
|
|
static void i2c_wr16(struct v4l2_subdev *sd, u16 reg, u16 val)
|
|
{
|
|
i2c_wr(sd, reg, (u8 *)&val, 2);
|
|
}
|
|
|
|
static void i2c_wr16_and_or(struct v4l2_subdev *sd, u16 reg, u16 mask, u16 val)
|
|
{
|
|
i2c_wr16(sd, reg, (i2c_rd16(sd, reg) & mask) | val);
|
|
}
|
|
|
|
static u32 i2c_rd32(struct v4l2_subdev *sd, u16 reg)
|
|
{
|
|
u32 val;
|
|
|
|
i2c_rd(sd, reg, (u8 *)&val, 4);
|
|
|
|
return val;
|
|
}
|
|
|
|
static void i2c_wr32(struct v4l2_subdev *sd, u16 reg, u32 val)
|
|
{
|
|
i2c_wr(sd, reg, (u8 *)&val, 4);
|
|
}
|
|
|
|
/* --------------- STATUS --------------- */
|
|
|
|
static inline bool is_hdmi(struct v4l2_subdev *sd)
|
|
{
|
|
return i2c_rd8(sd, SYS_STATUS) & MASK_S_HDMI;
|
|
}
|
|
|
|
static inline bool tx_5v_power_present(struct v4l2_subdev *sd)
|
|
{
|
|
return i2c_rd8(sd, SYS_STATUS) & MASK_S_DDC5V;
|
|
}
|
|
|
|
static inline bool no_signal(struct v4l2_subdev *sd)
|
|
{
|
|
return !(i2c_rd8(sd, SYS_STATUS) & MASK_S_TMDS);
|
|
}
|
|
|
|
static inline bool no_sync(struct v4l2_subdev *sd)
|
|
{
|
|
return !(i2c_rd8(sd, SYS_STATUS) & MASK_S_SYNC);
|
|
}
|
|
|
|
static inline bool audio_present(struct v4l2_subdev *sd)
|
|
{
|
|
return i2c_rd8(sd, AU_STATUS0) & MASK_S_A_SAMPLE;
|
|
}
|
|
|
|
static int get_audio_sampling_rate(struct v4l2_subdev *sd)
|
|
{
|
|
static const int code_to_rate[] = {
|
|
44100, 0, 48000, 32000, 22050, 384000, 24000, 352800,
|
|
88200, 768000, 96000, 705600, 176400, 0, 192000, 0
|
|
};
|
|
|
|
/* Register FS_SET is not cleared when the cable is disconnected */
|
|
if (no_signal(sd))
|
|
return 0;
|
|
|
|
return code_to_rate[i2c_rd8(sd, FS_SET) & MASK_FS];
|
|
}
|
|
|
|
/* --------------- TIMINGS --------------- */
|
|
|
|
static inline unsigned fps(const struct v4l2_bt_timings *t)
|
|
{
|
|
if (!V4L2_DV_BT_FRAME_HEIGHT(t) || !V4L2_DV_BT_FRAME_WIDTH(t))
|
|
return 0;
|
|
|
|
return DIV_ROUND_CLOSEST((unsigned)t->pixelclock,
|
|
V4L2_DV_BT_FRAME_HEIGHT(t) * V4L2_DV_BT_FRAME_WIDTH(t));
|
|
}
|
|
|
|
static int tc358743_get_detected_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings *timings)
|
|
{
|
|
struct v4l2_bt_timings *bt = &timings->bt;
|
|
unsigned width, height, frame_width, frame_height, frame_interval, fps;
|
|
|
|
memset(timings, 0, sizeof(struct v4l2_dv_timings));
|
|
|
|
if (no_signal(sd)) {
|
|
v4l2_dbg(1, debug, sd, "%s: no valid signal\n", __func__);
|
|
return -ENOLINK;
|
|
}
|
|
if (no_sync(sd)) {
|
|
v4l2_dbg(1, debug, sd, "%s: no sync on signal\n", __func__);
|
|
return -ENOLCK;
|
|
}
|
|
|
|
timings->type = V4L2_DV_BT_656_1120;
|
|
bt->interlaced = i2c_rd8(sd, VI_STATUS1) & MASK_S_V_INTERLACE ?
|
|
V4L2_DV_INTERLACED : V4L2_DV_PROGRESSIVE;
|
|
|
|
width = ((i2c_rd8(sd, DE_WIDTH_H_HI) & 0x1f) << 8) +
|
|
i2c_rd8(sd, DE_WIDTH_H_LO);
|
|
height = ((i2c_rd8(sd, DE_WIDTH_V_HI) & 0x1f) << 8) +
|
|
i2c_rd8(sd, DE_WIDTH_V_LO);
|
|
frame_width = ((i2c_rd8(sd, H_SIZE_HI) & 0x1f) << 8) +
|
|
i2c_rd8(sd, H_SIZE_LO);
|
|
frame_height = (((i2c_rd8(sd, V_SIZE_HI) & 0x3f) << 8) +
|
|
i2c_rd8(sd, V_SIZE_LO)) / 2;
|
|
/* frame interval in milliseconds * 10
|
|
* Require SYS_FREQ0 and SYS_FREQ1 are precisely set */
|
|
frame_interval = ((i2c_rd8(sd, FV_CNT_HI) & 0x3) << 8) +
|
|
i2c_rd8(sd, FV_CNT_LO);
|
|
fps = (frame_interval > 0) ?
|
|
DIV_ROUND_CLOSEST(10000, frame_interval) : 0;
|
|
|
|
bt->width = width;
|
|
bt->height = height;
|
|
bt->vsync = frame_height - height;
|
|
bt->hsync = frame_width - width;
|
|
bt->pixelclock = frame_width * frame_height * fps;
|
|
if (bt->interlaced == V4L2_DV_INTERLACED) {
|
|
bt->height *= 2;
|
|
bt->il_vsync = bt->vsync + 1;
|
|
bt->pixelclock /= 2;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* --------------- HOTPLUG / HDCP / EDID --------------- */
|
|
|
|
static void tc358743_delayed_work_enable_hotplug(struct work_struct *work)
|
|
{
|
|
struct delayed_work *dwork = to_delayed_work(work);
|
|
struct tc358743_state *state = container_of(dwork,
|
|
struct tc358743_state, delayed_work_enable_hotplug);
|
|
struct v4l2_subdev *sd = &state->sd;
|
|
|
|
v4l2_dbg(2, debug, sd, "%s:\n", __func__);
|
|
|
|
i2c_wr8_and_or(sd, HPD_CTL, ~MASK_HPD_OUT0, MASK_HPD_OUT0);
|
|
}
|
|
|
|
static void tc358743_set_hdmi_hdcp(struct v4l2_subdev *sd, bool enable)
|
|
{
|
|
v4l2_dbg(2, debug, sd, "%s: %s\n", __func__, enable ?
|
|
"enable" : "disable");
|
|
|
|
if (enable) {
|
|
i2c_wr8_and_or(sd, HDCP_REG3, ~KEY_RD_CMD, KEY_RD_CMD);
|
|
|
|
i2c_wr8_and_or(sd, HDCP_MODE, ~MASK_MANUAL_AUTHENTICATION, 0);
|
|
|
|
i2c_wr8_and_or(sd, HDCP_REG1, 0xff,
|
|
MASK_AUTH_UNAUTH_SEL_16_FRAMES |
|
|
MASK_AUTH_UNAUTH_AUTO);
|
|
|
|
i2c_wr8_and_or(sd, HDCP_REG2, ~MASK_AUTO_P3_RESET,
|
|
SET_AUTO_P3_RESET_FRAMES(0x0f));
|
|
} else {
|
|
i2c_wr8_and_or(sd, HDCP_MODE, ~MASK_MANUAL_AUTHENTICATION,
|
|
MASK_MANUAL_AUTHENTICATION);
|
|
}
|
|
}
|
|
|
|
static void tc358743_disable_edid(struct v4l2_subdev *sd)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
|
|
v4l2_dbg(2, debug, sd, "%s:\n", __func__);
|
|
|
|
cancel_delayed_work_sync(&state->delayed_work_enable_hotplug);
|
|
|
|
/* DDC access to EDID is also disabled when hotplug is disabled. See
|
|
* register DDC_CTL */
|
|
i2c_wr8_and_or(sd, HPD_CTL, ~MASK_HPD_OUT0, 0x0);
|
|
}
|
|
|
|
static void tc358743_enable_edid(struct v4l2_subdev *sd)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
|
|
if (state->edid_blocks_written == 0) {
|
|
v4l2_dbg(2, debug, sd, "%s: no EDID -> no hotplug\n", __func__);
|
|
tc358743_s_ctrl_detect_tx_5v(sd);
|
|
return;
|
|
}
|
|
|
|
v4l2_dbg(2, debug, sd, "%s:\n", __func__);
|
|
|
|
/* Enable hotplug after 100 ms. DDC access to EDID is also enabled when
|
|
* hotplug is enabled. See register DDC_CTL */
|
|
schedule_delayed_work(&state->delayed_work_enable_hotplug, HZ / 10);
|
|
|
|
tc358743_enable_interrupts(sd, true);
|
|
tc358743_s_ctrl_detect_tx_5v(sd);
|
|
}
|
|
|
|
static void tc358743_erase_bksv(struct v4l2_subdev *sd)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 5; i++)
|
|
i2c_wr8(sd, BKSV + i, 0);
|
|
}
|
|
|
|
/* --------------- AVI infoframe --------------- */
|
|
|
|
static void print_avi_infoframe(struct v4l2_subdev *sd)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct device *dev = &client->dev;
|
|
union hdmi_infoframe frame;
|
|
u8 buffer[HDMI_INFOFRAME_SIZE(AVI)];
|
|
|
|
if (!is_hdmi(sd)) {
|
|
v4l2_info(sd, "DVI-D signal - AVI infoframe not supported\n");
|
|
return;
|
|
}
|
|
|
|
i2c_rd(sd, PK_AVI_0HEAD, buffer, HDMI_INFOFRAME_SIZE(AVI));
|
|
|
|
if (hdmi_infoframe_unpack(&frame, buffer) < 0) {
|
|
v4l2_err(sd, "%s: unpack of AVI infoframe failed\n", __func__);
|
|
return;
|
|
}
|
|
|
|
hdmi_infoframe_log(KERN_INFO, dev, &frame);
|
|
}
|
|
|
|
/* --------------- CTRLS --------------- */
|
|
|
|
static int tc358743_s_ctrl_detect_tx_5v(struct v4l2_subdev *sd)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
|
|
return v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl,
|
|
tx_5v_power_present(sd));
|
|
}
|
|
|
|
static int tc358743_s_ctrl_audio_sampling_rate(struct v4l2_subdev *sd)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
|
|
return v4l2_ctrl_s_ctrl(state->audio_sampling_rate_ctrl,
|
|
get_audio_sampling_rate(sd));
|
|
}
|
|
|
|
static int tc358743_s_ctrl_audio_present(struct v4l2_subdev *sd)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
|
|
return v4l2_ctrl_s_ctrl(state->audio_present_ctrl,
|
|
audio_present(sd));
|
|
}
|
|
|
|
static int tc358743_update_controls(struct v4l2_subdev *sd)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret |= tc358743_s_ctrl_detect_tx_5v(sd);
|
|
ret |= tc358743_s_ctrl_audio_sampling_rate(sd);
|
|
ret |= tc358743_s_ctrl_audio_present(sd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* --------------- INIT --------------- */
|
|
|
|
static void tc358743_reset_phy(struct v4l2_subdev *sd)
|
|
{
|
|
v4l2_dbg(1, debug, sd, "%s:\n", __func__);
|
|
|
|
i2c_wr8_and_or(sd, PHY_RST, ~MASK_RESET_CTRL, 0);
|
|
i2c_wr8_and_or(sd, PHY_RST, ~MASK_RESET_CTRL, MASK_RESET_CTRL);
|
|
}
|
|
|
|
static void tc358743_reset(struct v4l2_subdev *sd, uint16_t mask)
|
|
{
|
|
u16 sysctl = i2c_rd16(sd, SYSCTL);
|
|
|
|
i2c_wr16(sd, SYSCTL, sysctl | mask);
|
|
i2c_wr16(sd, SYSCTL, sysctl & ~mask);
|
|
}
|
|
|
|
static inline void tc358743_sleep_mode(struct v4l2_subdev *sd, bool enable)
|
|
{
|
|
i2c_wr16_and_or(sd, SYSCTL, ~MASK_SLEEP,
|
|
enable ? MASK_SLEEP : 0);
|
|
}
|
|
|
|
static inline void enable_stream(struct v4l2_subdev *sd, bool enable)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
|
|
v4l2_dbg(3, debug, sd, "%s: %sable\n",
|
|
__func__, enable ? "en" : "dis");
|
|
|
|
if (enable) {
|
|
/* It is critical for CSI receiver to see lane transition
|
|
* LP11->HS. Set to non-continuous mode to enable clock lane
|
|
* LP11 state. */
|
|
i2c_wr32(sd, TXOPTIONCNTRL, 0);
|
|
/* Set to continuous mode to trigger LP11->HS transition */
|
|
i2c_wr32(sd, TXOPTIONCNTRL, MASK_CONTCLKMODE);
|
|
/* Unmute video */
|
|
i2c_wr8(sd, VI_MUTE, MASK_AUTO_MUTE);
|
|
} else {
|
|
/* Mute video so that all data lanes go to LSP11 state.
|
|
* No data is output to CSI Tx block. */
|
|
i2c_wr8(sd, VI_MUTE, MASK_AUTO_MUTE | MASK_VI_MUTE);
|
|
}
|
|
|
|
mutex_lock(&state->confctl_mutex);
|
|
i2c_wr16_and_or(sd, CONFCTL, ~(MASK_VBUFEN | MASK_ABUFEN),
|
|
enable ? (MASK_VBUFEN | MASK_ABUFEN) : 0x0);
|
|
mutex_unlock(&state->confctl_mutex);
|
|
}
|
|
|
|
static void tc358743_set_pll(struct v4l2_subdev *sd)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
struct tc358743_platform_data *pdata = &state->pdata;
|
|
u16 pllctl0 = i2c_rd16(sd, PLLCTL0);
|
|
u16 pllctl1 = i2c_rd16(sd, PLLCTL1);
|
|
u16 pllctl0_new = SET_PLL_PRD(pdata->pll_prd) |
|
|
SET_PLL_FBD(pdata->pll_fbd);
|
|
u32 hsck = (pdata->refclk_hz / pdata->pll_prd) * pdata->pll_fbd;
|
|
|
|
v4l2_dbg(2, debug, sd, "%s:\n", __func__);
|
|
|
|
/* Only rewrite when needed (new value or disabled), since rewriting
|
|
* triggers another format change event. */
|
|
if ((pllctl0 != pllctl0_new) || ((pllctl1 & MASK_PLL_EN) == 0)) {
|
|
u16 pll_frs;
|
|
|
|
if (hsck > 500000000)
|
|
pll_frs = 0x0;
|
|
else if (hsck > 250000000)
|
|
pll_frs = 0x1;
|
|
else if (hsck > 125000000)
|
|
pll_frs = 0x2;
|
|
else
|
|
pll_frs = 0x3;
|
|
|
|
v4l2_dbg(1, debug, sd, "%s: updating PLL clock\n", __func__);
|
|
tc358743_sleep_mode(sd, true);
|
|
i2c_wr16(sd, PLLCTL0, pllctl0_new);
|
|
i2c_wr16_and_or(sd, PLLCTL1,
|
|
~(MASK_PLL_FRS | MASK_RESETB | MASK_PLL_EN),
|
|
(SET_PLL_FRS(pll_frs) | MASK_RESETB |
|
|
MASK_PLL_EN));
|
|
udelay(10); /* REF_02, Sheet "Source HDMI" */
|
|
i2c_wr16_and_or(sd, PLLCTL1, ~MASK_CKEN, MASK_CKEN);
|
|
tc358743_sleep_mode(sd, false);
|
|
}
|
|
}
|
|
|
|
static void tc358743_set_ref_clk(struct v4l2_subdev *sd)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
struct tc358743_platform_data *pdata = &state->pdata;
|
|
u32 sys_freq;
|
|
u32 lockdet_ref;
|
|
u16 fh_min;
|
|
u16 fh_max;
|
|
|
|
BUG_ON(!(pdata->refclk_hz == 26000000 ||
|
|
pdata->refclk_hz == 27000000 ||
|
|
pdata->refclk_hz == 42000000));
|
|
|
|
sys_freq = pdata->refclk_hz / 10000;
|
|
i2c_wr8(sd, SYS_FREQ0, sys_freq & 0x00ff);
|
|
i2c_wr8(sd, SYS_FREQ1, (sys_freq & 0xff00) >> 8);
|
|
|
|
i2c_wr8_and_or(sd, PHY_CTL0, ~MASK_PHY_SYSCLK_IND,
|
|
(pdata->refclk_hz == 42000000) ?
|
|
MASK_PHY_SYSCLK_IND : 0x0);
|
|
|
|
fh_min = pdata->refclk_hz / 100000;
|
|
i2c_wr8(sd, FH_MIN0, fh_min & 0x00ff);
|
|
i2c_wr8(sd, FH_MIN1, (fh_min & 0xff00) >> 8);
|
|
|
|
fh_max = (fh_min * 66) / 10;
|
|
i2c_wr8(sd, FH_MAX0, fh_max & 0x00ff);
|
|
i2c_wr8(sd, FH_MAX1, (fh_max & 0xff00) >> 8);
|
|
|
|
lockdet_ref = pdata->refclk_hz / 100;
|
|
i2c_wr8(sd, LOCKDET_REF0, lockdet_ref & 0x0000ff);
|
|
i2c_wr8(sd, LOCKDET_REF1, (lockdet_ref & 0x00ff00) >> 8);
|
|
i2c_wr8(sd, LOCKDET_REF2, (lockdet_ref & 0x0f0000) >> 16);
|
|
|
|
i2c_wr8_and_or(sd, NCO_F0_MOD, ~MASK_NCO_F0_MOD,
|
|
(pdata->refclk_hz == 27000000) ?
|
|
MASK_NCO_F0_MOD_27MHZ : 0x0);
|
|
}
|
|
|
|
static void tc358743_set_csi_color_space(struct v4l2_subdev *sd)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
|
|
switch (state->mbus_fmt_code) {
|
|
case MEDIA_BUS_FMT_UYVY8_1X16:
|
|
v4l2_dbg(2, debug, sd, "%s: YCbCr 422 16-bit\n", __func__);
|
|
i2c_wr8_and_or(sd, VOUT_SET2,
|
|
~(MASK_SEL422 | MASK_VOUT_422FIL_100) & 0xff,
|
|
MASK_SEL422 | MASK_VOUT_422FIL_100);
|
|
i2c_wr8_and_or(sd, VI_REP, ~MASK_VOUT_COLOR_SEL & 0xff,
|
|
MASK_VOUT_COLOR_601_YCBCR_LIMITED);
|
|
mutex_lock(&state->confctl_mutex);
|
|
i2c_wr16_and_or(sd, CONFCTL, ~MASK_YCBCRFMT,
|
|
MASK_YCBCRFMT_422_8_BIT);
|
|
mutex_unlock(&state->confctl_mutex);
|
|
break;
|
|
case MEDIA_BUS_FMT_RGB888_1X24:
|
|
v4l2_dbg(2, debug, sd, "%s: RGB 888 24-bit\n", __func__);
|
|
i2c_wr8_and_or(sd, VOUT_SET2,
|
|
~(MASK_SEL422 | MASK_VOUT_422FIL_100) & 0xff,
|
|
0x00);
|
|
i2c_wr8_and_or(sd, VI_REP, ~MASK_VOUT_COLOR_SEL & 0xff,
|
|
MASK_VOUT_COLOR_RGB_FULL);
|
|
mutex_lock(&state->confctl_mutex);
|
|
i2c_wr16_and_or(sd, CONFCTL, ~MASK_YCBCRFMT, 0);
|
|
mutex_unlock(&state->confctl_mutex);
|
|
break;
|
|
default:
|
|
v4l2_dbg(2, debug, sd, "%s: Unsupported format code 0x%x\n",
|
|
__func__, state->mbus_fmt_code);
|
|
}
|
|
}
|
|
|
|
static unsigned tc358743_num_csi_lanes_needed(struct v4l2_subdev *sd)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
struct v4l2_bt_timings *bt = &state->timings.bt;
|
|
struct tc358743_platform_data *pdata = &state->pdata;
|
|
u32 bits_pr_pixel =
|
|
(state->mbus_fmt_code == MEDIA_BUS_FMT_UYVY8_1X16) ? 16 : 24;
|
|
u32 bps = bt->width * bt->height * fps(bt) * bits_pr_pixel;
|
|
u32 bps_pr_lane = (pdata->refclk_hz / pdata->pll_prd) * pdata->pll_fbd;
|
|
|
|
return DIV_ROUND_UP(bps, bps_pr_lane);
|
|
}
|
|
|
|
static void tc358743_set_csi(struct v4l2_subdev *sd)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
struct tc358743_platform_data *pdata = &state->pdata;
|
|
unsigned lanes = tc358743_num_csi_lanes_needed(sd);
|
|
|
|
v4l2_dbg(3, debug, sd, "%s:\n", __func__);
|
|
|
|
state->csi_lanes_in_use = lanes;
|
|
|
|
tc358743_reset(sd, MASK_CTXRST);
|
|
|
|
if (lanes < 1)
|
|
i2c_wr32(sd, CLW_CNTRL, MASK_CLW_LANEDISABLE);
|
|
if (lanes < 1)
|
|
i2c_wr32(sd, D0W_CNTRL, MASK_D0W_LANEDISABLE);
|
|
if (lanes < 2)
|
|
i2c_wr32(sd, D1W_CNTRL, MASK_D1W_LANEDISABLE);
|
|
if (lanes < 3)
|
|
i2c_wr32(sd, D2W_CNTRL, MASK_D2W_LANEDISABLE);
|
|
if (lanes < 4)
|
|
i2c_wr32(sd, D3W_CNTRL, MASK_D3W_LANEDISABLE);
|
|
|
|
i2c_wr32(sd, LINEINITCNT, pdata->lineinitcnt);
|
|
i2c_wr32(sd, LPTXTIMECNT, pdata->lptxtimecnt);
|
|
i2c_wr32(sd, TCLK_HEADERCNT, pdata->tclk_headercnt);
|
|
i2c_wr32(sd, TCLK_TRAILCNT, pdata->tclk_trailcnt);
|
|
i2c_wr32(sd, THS_HEADERCNT, pdata->ths_headercnt);
|
|
i2c_wr32(sd, TWAKEUP, pdata->twakeup);
|
|
i2c_wr32(sd, TCLK_POSTCNT, pdata->tclk_postcnt);
|
|
i2c_wr32(sd, THS_TRAILCNT, pdata->ths_trailcnt);
|
|
i2c_wr32(sd, HSTXVREGCNT, pdata->hstxvregcnt);
|
|
|
|
i2c_wr32(sd, HSTXVREGEN,
|
|
((lanes > 0) ? MASK_CLM_HSTXVREGEN : 0x0) |
|
|
((lanes > 0) ? MASK_D0M_HSTXVREGEN : 0x0) |
|
|
((lanes > 1) ? MASK_D1M_HSTXVREGEN : 0x0) |
|
|
((lanes > 2) ? MASK_D2M_HSTXVREGEN : 0x0) |
|
|
((lanes > 3) ? MASK_D3M_HSTXVREGEN : 0x0));
|
|
|
|
i2c_wr32(sd, TXOPTIONCNTRL, (state->bus.flags &
|
|
V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) ? MASK_CONTCLKMODE : 0);
|
|
i2c_wr32(sd, STARTCNTRL, MASK_START);
|
|
i2c_wr32(sd, CSI_START, MASK_STRT);
|
|
|
|
i2c_wr32(sd, CSI_CONFW, MASK_MODE_SET |
|
|
MASK_ADDRESS_CSI_CONTROL |
|
|
MASK_CSI_MODE |
|
|
MASK_TXHSMD |
|
|
((lanes == 4) ? MASK_NOL_4 :
|
|
(lanes == 3) ? MASK_NOL_3 :
|
|
(lanes == 2) ? MASK_NOL_2 : MASK_NOL_1));
|
|
|
|
i2c_wr32(sd, CSI_CONFW, MASK_MODE_SET |
|
|
MASK_ADDRESS_CSI_ERR_INTENA | MASK_TXBRK | MASK_QUNK |
|
|
MASK_WCER | MASK_INER);
|
|
|
|
i2c_wr32(sd, CSI_CONFW, MASK_MODE_CLEAR |
|
|
MASK_ADDRESS_CSI_ERR_HALT | MASK_TXBRK | MASK_QUNK);
|
|
|
|
i2c_wr32(sd, CSI_CONFW, MASK_MODE_SET |
|
|
MASK_ADDRESS_CSI_INT_ENA | MASK_INTER);
|
|
}
|
|
|
|
static void tc358743_set_hdmi_phy(struct v4l2_subdev *sd)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
struct tc358743_platform_data *pdata = &state->pdata;
|
|
|
|
/* Default settings from REF_02, sheet "Source HDMI"
|
|
* and custom settings as platform data */
|
|
i2c_wr8_and_or(sd, PHY_EN, ~MASK_ENABLE_PHY, 0x0);
|
|
i2c_wr8(sd, PHY_CTL1, SET_PHY_AUTO_RST1_US(1600) |
|
|
SET_FREQ_RANGE_MODE_CYCLES(1));
|
|
i2c_wr8_and_or(sd, PHY_CTL2, ~MASK_PHY_AUTO_RSTn,
|
|
(pdata->hdmi_phy_auto_reset_tmds_detected ?
|
|
MASK_PHY_AUTO_RST2 : 0) |
|
|
(pdata->hdmi_phy_auto_reset_tmds_in_range ?
|
|
MASK_PHY_AUTO_RST3 : 0) |
|
|
(pdata->hdmi_phy_auto_reset_tmds_valid ?
|
|
MASK_PHY_AUTO_RST4 : 0));
|
|
i2c_wr8(sd, PHY_BIAS, 0x40);
|
|
i2c_wr8(sd, PHY_CSQ, SET_CSQ_CNT_LEVEL(0x0a));
|
|
i2c_wr8(sd, AVM_CTL, 45);
|
|
i2c_wr8_and_or(sd, HDMI_DET, ~MASK_HDMI_DET_V,
|
|
pdata->hdmi_detection_delay << 4);
|
|
i2c_wr8_and_or(sd, HV_RST, ~(MASK_H_PI_RST | MASK_V_PI_RST),
|
|
(pdata->hdmi_phy_auto_reset_hsync_out_of_range ?
|
|
MASK_H_PI_RST : 0) |
|
|
(pdata->hdmi_phy_auto_reset_vsync_out_of_range ?
|
|
MASK_V_PI_RST : 0));
|
|
i2c_wr8_and_or(sd, PHY_EN, ~MASK_ENABLE_PHY, MASK_ENABLE_PHY);
|
|
}
|
|
|
|
static void tc358743_set_hdmi_audio(struct v4l2_subdev *sd)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
|
|
/* Default settings from REF_02, sheet "Source HDMI" */
|
|
i2c_wr8(sd, FORCE_MUTE, 0x00);
|
|
i2c_wr8(sd, AUTO_CMD0, MASK_AUTO_MUTE7 | MASK_AUTO_MUTE6 |
|
|
MASK_AUTO_MUTE5 | MASK_AUTO_MUTE4 |
|
|
MASK_AUTO_MUTE1 | MASK_AUTO_MUTE0);
|
|
i2c_wr8(sd, AUTO_CMD1, MASK_AUTO_MUTE9);
|
|
i2c_wr8(sd, AUTO_CMD2, MASK_AUTO_PLAY3 | MASK_AUTO_PLAY2);
|
|
i2c_wr8(sd, BUFINIT_START, SET_BUFINIT_START_MS(500));
|
|
i2c_wr8(sd, FS_MUTE, 0x00);
|
|
i2c_wr8(sd, FS_IMODE, MASK_NLPCM_SMODE | MASK_FS_SMODE);
|
|
i2c_wr8(sd, ACR_MODE, MASK_CTS_MODE);
|
|
i2c_wr8(sd, ACR_MDF0, MASK_ACR_L2MDF_1976_PPM | MASK_ACR_L1MDF_976_PPM);
|
|
i2c_wr8(sd, ACR_MDF1, MASK_ACR_L3MDF_3906_PPM);
|
|
i2c_wr8(sd, SDO_MODE1, MASK_SDO_FMT_I2S);
|
|
i2c_wr8(sd, DIV_MODE, SET_DIV_DLY_MS(100));
|
|
|
|
mutex_lock(&state->confctl_mutex);
|
|
i2c_wr16_and_or(sd, CONFCTL, 0xffff, MASK_AUDCHNUM_2 |
|
|
MASK_AUDOUTSEL_I2S | MASK_AUTOINDEX);
|
|
mutex_unlock(&state->confctl_mutex);
|
|
}
|
|
|
|
static void tc358743_set_hdmi_info_frame_mode(struct v4l2_subdev *sd)
|
|
{
|
|
/* Default settings from REF_02, sheet "Source HDMI" */
|
|
i2c_wr8(sd, PK_INT_MODE, MASK_ISRC2_INT_MODE | MASK_ISRC_INT_MODE |
|
|
MASK_ACP_INT_MODE | MASK_VS_INT_MODE |
|
|
MASK_SPD_INT_MODE | MASK_MS_INT_MODE |
|
|
MASK_AUD_INT_MODE | MASK_AVI_INT_MODE);
|
|
i2c_wr8(sd, NO_PKT_LIMIT, 0x2c);
|
|
i2c_wr8(sd, NO_PKT_CLR, 0x53);
|
|
i2c_wr8(sd, ERR_PK_LIMIT, 0x01);
|
|
i2c_wr8(sd, NO_PKT_LIMIT2, 0x30);
|
|
i2c_wr8(sd, NO_GDB_LIMIT, 0x10);
|
|
}
|
|
|
|
static void tc358743_initial_setup(struct v4l2_subdev *sd)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
struct tc358743_platform_data *pdata = &state->pdata;
|
|
|
|
/* CEC and IR are not supported by this driver */
|
|
i2c_wr16_and_or(sd, SYSCTL, ~(MASK_CECRST | MASK_IRRST),
|
|
(MASK_CECRST | MASK_IRRST));
|
|
|
|
tc358743_reset(sd, MASK_CTXRST | MASK_HDMIRST);
|
|
tc358743_sleep_mode(sd, false);
|
|
|
|
i2c_wr16(sd, FIFOCTL, pdata->fifo_level);
|
|
|
|
tc358743_set_ref_clk(sd);
|
|
|
|
i2c_wr8_and_or(sd, DDC_CTL, ~MASK_DDC5V_MODE,
|
|
pdata->ddc5v_delay & MASK_DDC5V_MODE);
|
|
i2c_wr8_and_or(sd, EDID_MODE, ~MASK_EDID_MODE, MASK_EDID_MODE_E_DDC);
|
|
|
|
tc358743_set_hdmi_phy(sd);
|
|
tc358743_set_hdmi_hdcp(sd, pdata->enable_hdcp);
|
|
tc358743_set_hdmi_audio(sd);
|
|
tc358743_set_hdmi_info_frame_mode(sd);
|
|
|
|
/* All CE and IT formats are detected as RGB full range in DVI mode */
|
|
i2c_wr8_and_or(sd, VI_MODE, ~MASK_RGB_DVI, 0);
|
|
|
|
i2c_wr8_and_or(sd, VOUT_SET2, ~MASK_VOUTCOLORMODE,
|
|
MASK_VOUTCOLORMODE_AUTO);
|
|
i2c_wr8(sd, VOUT_SET3, MASK_VOUT_EXTCNT);
|
|
}
|
|
|
|
/* --------------- IRQ --------------- */
|
|
|
|
static void tc358743_format_change(struct v4l2_subdev *sd)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
struct v4l2_dv_timings timings;
|
|
const struct v4l2_event tc358743_ev_fmt = {
|
|
.type = V4L2_EVENT_SOURCE_CHANGE,
|
|
.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
|
|
};
|
|
|
|
if (tc358743_get_detected_timings(sd, &timings)) {
|
|
enable_stream(sd, false);
|
|
|
|
v4l2_dbg(1, debug, sd, "%s: No signal\n",
|
|
__func__);
|
|
} else {
|
|
if (!v4l2_match_dv_timings(&state->timings, &timings, 0, false))
|
|
enable_stream(sd, false);
|
|
|
|
if (debug)
|
|
v4l2_print_dv_timings(sd->name,
|
|
"tc358743_format_change: New format: ",
|
|
&timings, false);
|
|
}
|
|
|
|
if (sd->devnode)
|
|
v4l2_subdev_notify_event(sd, &tc358743_ev_fmt);
|
|
}
|
|
|
|
static void tc358743_init_interrupts(struct v4l2_subdev *sd)
|
|
{
|
|
u16 i;
|
|
|
|
/* clear interrupt status registers */
|
|
for (i = SYS_INT; i <= KEY_INT; i++)
|
|
i2c_wr8(sd, i, 0xff);
|
|
|
|
i2c_wr16(sd, INTSTATUS, 0xffff);
|
|
}
|
|
|
|
static void tc358743_enable_interrupts(struct v4l2_subdev *sd,
|
|
bool cable_connected)
|
|
{
|
|
v4l2_dbg(2, debug, sd, "%s: cable connected = %d\n", __func__,
|
|
cable_connected);
|
|
|
|
if (cable_connected) {
|
|
i2c_wr8(sd, SYS_INTM, ~(MASK_M_DDC | MASK_M_DVI_DET |
|
|
MASK_M_HDMI_DET) & 0xff);
|
|
i2c_wr8(sd, CLK_INTM, ~MASK_M_IN_DE_CHG);
|
|
i2c_wr8(sd, CBIT_INTM, ~(MASK_M_CBIT_FS | MASK_M_AF_LOCK |
|
|
MASK_M_AF_UNLOCK) & 0xff);
|
|
i2c_wr8(sd, AUDIO_INTM, ~MASK_M_BUFINIT_END);
|
|
i2c_wr8(sd, MISC_INTM, ~MASK_M_SYNC_CHG);
|
|
} else {
|
|
i2c_wr8(sd, SYS_INTM, ~MASK_M_DDC & 0xff);
|
|
i2c_wr8(sd, CLK_INTM, 0xff);
|
|
i2c_wr8(sd, CBIT_INTM, 0xff);
|
|
i2c_wr8(sd, AUDIO_INTM, 0xff);
|
|
i2c_wr8(sd, MISC_INTM, 0xff);
|
|
}
|
|
}
|
|
|
|
static void tc358743_hdmi_audio_int_handler(struct v4l2_subdev *sd,
|
|
bool *handled)
|
|
{
|
|
u8 audio_int_mask = i2c_rd8(sd, AUDIO_INTM);
|
|
u8 audio_int = i2c_rd8(sd, AUDIO_INT) & ~audio_int_mask;
|
|
|
|
i2c_wr8(sd, AUDIO_INT, audio_int);
|
|
|
|
v4l2_dbg(3, debug, sd, "%s: AUDIO_INT = 0x%02x\n", __func__, audio_int);
|
|
|
|
tc358743_s_ctrl_audio_sampling_rate(sd);
|
|
tc358743_s_ctrl_audio_present(sd);
|
|
}
|
|
|
|
static void tc358743_csi_err_int_handler(struct v4l2_subdev *sd, bool *handled)
|
|
{
|
|
v4l2_err(sd, "%s: CSI_ERR = 0x%x\n", __func__, i2c_rd32(sd, CSI_ERR));
|
|
|
|
i2c_wr32(sd, CSI_INT_CLR, MASK_ICRER);
|
|
}
|
|
|
|
static void tc358743_hdmi_misc_int_handler(struct v4l2_subdev *sd,
|
|
bool *handled)
|
|
{
|
|
u8 misc_int_mask = i2c_rd8(sd, MISC_INTM);
|
|
u8 misc_int = i2c_rd8(sd, MISC_INT) & ~misc_int_mask;
|
|
|
|
i2c_wr8(sd, MISC_INT, misc_int);
|
|
|
|
v4l2_dbg(3, debug, sd, "%s: MISC_INT = 0x%02x\n", __func__, misc_int);
|
|
|
|
if (misc_int & MASK_I_SYNC_CHG) {
|
|
/* Reset the HDMI PHY to try to trigger proper lock on the
|
|
* incoming video format. Erase BKSV to prevent that old keys
|
|
* are used when a new source is connected. */
|
|
if (no_sync(sd) || no_signal(sd)) {
|
|
tc358743_reset_phy(sd);
|
|
tc358743_erase_bksv(sd);
|
|
}
|
|
|
|
tc358743_format_change(sd);
|
|
|
|
misc_int &= ~MASK_I_SYNC_CHG;
|
|
if (handled)
|
|
*handled = true;
|
|
}
|
|
|
|
if (misc_int) {
|
|
v4l2_err(sd, "%s: Unhandled MISC_INT interrupts: 0x%02x\n",
|
|
__func__, misc_int);
|
|
}
|
|
}
|
|
|
|
static void tc358743_hdmi_cbit_int_handler(struct v4l2_subdev *sd,
|
|
bool *handled)
|
|
{
|
|
u8 cbit_int_mask = i2c_rd8(sd, CBIT_INTM);
|
|
u8 cbit_int = i2c_rd8(sd, CBIT_INT) & ~cbit_int_mask;
|
|
|
|
i2c_wr8(sd, CBIT_INT, cbit_int);
|
|
|
|
v4l2_dbg(3, debug, sd, "%s: CBIT_INT = 0x%02x\n", __func__, cbit_int);
|
|
|
|
if (cbit_int & MASK_I_CBIT_FS) {
|
|
|
|
v4l2_dbg(1, debug, sd, "%s: Audio sample rate changed\n",
|
|
__func__);
|
|
tc358743_s_ctrl_audio_sampling_rate(sd);
|
|
|
|
cbit_int &= ~MASK_I_CBIT_FS;
|
|
if (handled)
|
|
*handled = true;
|
|
}
|
|
|
|
if (cbit_int & (MASK_I_AF_LOCK | MASK_I_AF_UNLOCK)) {
|
|
|
|
v4l2_dbg(1, debug, sd, "%s: Audio present changed\n",
|
|
__func__);
|
|
tc358743_s_ctrl_audio_present(sd);
|
|
|
|
cbit_int &= ~(MASK_I_AF_LOCK | MASK_I_AF_UNLOCK);
|
|
if (handled)
|
|
*handled = true;
|
|
}
|
|
|
|
if (cbit_int) {
|
|
v4l2_err(sd, "%s: Unhandled CBIT_INT interrupts: 0x%02x\n",
|
|
__func__, cbit_int);
|
|
}
|
|
}
|
|
|
|
static void tc358743_hdmi_clk_int_handler(struct v4l2_subdev *sd, bool *handled)
|
|
{
|
|
u8 clk_int_mask = i2c_rd8(sd, CLK_INTM);
|
|
u8 clk_int = i2c_rd8(sd, CLK_INT) & ~clk_int_mask;
|
|
|
|
/* Bit 7 and bit 6 are set even when they are masked */
|
|
i2c_wr8(sd, CLK_INT, clk_int | 0x80 | MASK_I_OUT_H_CHG);
|
|
|
|
v4l2_dbg(3, debug, sd, "%s: CLK_INT = 0x%02x\n", __func__, clk_int);
|
|
|
|
if (clk_int & (MASK_I_IN_DE_CHG)) {
|
|
|
|
v4l2_dbg(1, debug, sd, "%s: DE size or position has changed\n",
|
|
__func__);
|
|
|
|
/* If the source switch to a new resolution with the same pixel
|
|
* frequency as the existing (e.g. 1080p25 -> 720p50), the
|
|
* I_SYNC_CHG interrupt is not always triggered, while the
|
|
* I_IN_DE_CHG interrupt seems to work fine. Format change
|
|
* notifications are only sent when the signal is stable to
|
|
* reduce the number of notifications. */
|
|
if (!no_signal(sd) && !no_sync(sd))
|
|
tc358743_format_change(sd);
|
|
|
|
clk_int &= ~(MASK_I_IN_DE_CHG);
|
|
if (handled)
|
|
*handled = true;
|
|
}
|
|
|
|
if (clk_int) {
|
|
v4l2_err(sd, "%s: Unhandled CLK_INT interrupts: 0x%02x\n",
|
|
__func__, clk_int);
|
|
}
|
|
}
|
|
|
|
static void tc358743_hdmi_sys_int_handler(struct v4l2_subdev *sd, bool *handled)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
u8 sys_int_mask = i2c_rd8(sd, SYS_INTM);
|
|
u8 sys_int = i2c_rd8(sd, SYS_INT) & ~sys_int_mask;
|
|
|
|
i2c_wr8(sd, SYS_INT, sys_int);
|
|
|
|
v4l2_dbg(3, debug, sd, "%s: SYS_INT = 0x%02x\n", __func__, sys_int);
|
|
|
|
if (sys_int & MASK_I_DDC) {
|
|
bool tx_5v = tx_5v_power_present(sd);
|
|
|
|
v4l2_dbg(1, debug, sd, "%s: Tx 5V power present: %s\n",
|
|
__func__, tx_5v ? "yes" : "no");
|
|
|
|
if (tx_5v) {
|
|
tc358743_enable_edid(sd);
|
|
} else {
|
|
tc358743_enable_interrupts(sd, false);
|
|
tc358743_disable_edid(sd);
|
|
memset(&state->timings, 0, sizeof(state->timings));
|
|
tc358743_erase_bksv(sd);
|
|
tc358743_update_controls(sd);
|
|
}
|
|
|
|
sys_int &= ~MASK_I_DDC;
|
|
if (handled)
|
|
*handled = true;
|
|
}
|
|
|
|
if (sys_int & MASK_I_DVI) {
|
|
v4l2_dbg(1, debug, sd, "%s: HDMI->DVI change detected\n",
|
|
__func__);
|
|
|
|
/* Reset the HDMI PHY to try to trigger proper lock on the
|
|
* incoming video format. Erase BKSV to prevent that old keys
|
|
* are used when a new source is connected. */
|
|
if (no_sync(sd) || no_signal(sd)) {
|
|
tc358743_reset_phy(sd);
|
|
tc358743_erase_bksv(sd);
|
|
}
|
|
|
|
sys_int &= ~MASK_I_DVI;
|
|
if (handled)
|
|
*handled = true;
|
|
}
|
|
|
|
if (sys_int & MASK_I_HDMI) {
|
|
v4l2_dbg(1, debug, sd, "%s: DVI->HDMI change detected\n",
|
|
__func__);
|
|
|
|
/* Register is reset in DVI mode (REF_01, c. 6.6.41) */
|
|
i2c_wr8(sd, ANA_CTL, MASK_APPL_PCSX_NORMAL | MASK_ANALOG_ON);
|
|
|
|
sys_int &= ~MASK_I_HDMI;
|
|
if (handled)
|
|
*handled = true;
|
|
}
|
|
|
|
if (sys_int) {
|
|
v4l2_err(sd, "%s: Unhandled SYS_INT interrupts: 0x%02x\n",
|
|
__func__, sys_int);
|
|
}
|
|
}
|
|
|
|
/* --------------- CORE OPS --------------- */
|
|
|
|
static int tc358743_log_status(struct v4l2_subdev *sd)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
struct v4l2_dv_timings timings;
|
|
uint8_t hdmi_sys_status = i2c_rd8(sd, SYS_STATUS);
|
|
uint16_t sysctl = i2c_rd16(sd, SYSCTL);
|
|
u8 vi_status3 = i2c_rd8(sd, VI_STATUS3);
|
|
const int deep_color_mode[4] = { 8, 10, 12, 16 };
|
|
static const char * const input_color_space[] = {
|
|
"RGB", "YCbCr 601", "Adobe RGB", "YCbCr 709", "NA (4)",
|
|
"xvYCC 601", "NA(6)", "xvYCC 709", "NA(8)", "sYCC601",
|
|
"NA(10)", "NA(11)", "NA(12)", "Adobe YCC 601"};
|
|
|
|
v4l2_info(sd, "-----Chip status-----\n");
|
|
v4l2_info(sd, "Chip ID: 0x%02x\n",
|
|
(i2c_rd16(sd, CHIPID) & MASK_CHIPID) >> 8);
|
|
v4l2_info(sd, "Chip revision: 0x%02x\n",
|
|
i2c_rd16(sd, CHIPID) & MASK_REVID);
|
|
v4l2_info(sd, "Reset: IR: %d, CEC: %d, CSI TX: %d, HDMI: %d\n",
|
|
!!(sysctl & MASK_IRRST),
|
|
!!(sysctl & MASK_CECRST),
|
|
!!(sysctl & MASK_CTXRST),
|
|
!!(sysctl & MASK_HDMIRST));
|
|
v4l2_info(sd, "Sleep mode: %s\n", sysctl & MASK_SLEEP ? "on" : "off");
|
|
v4l2_info(sd, "Cable detected (+5V power): %s\n",
|
|
hdmi_sys_status & MASK_S_DDC5V ? "yes" : "no");
|
|
v4l2_info(sd, "DDC lines enabled: %s\n",
|
|
(i2c_rd8(sd, EDID_MODE) & MASK_EDID_MODE_E_DDC) ?
|
|
"yes" : "no");
|
|
v4l2_info(sd, "Hotplug enabled: %s\n",
|
|
(i2c_rd8(sd, HPD_CTL) & MASK_HPD_OUT0) ?
|
|
"yes" : "no");
|
|
v4l2_info(sd, "CEC enabled: %s\n",
|
|
(i2c_rd16(sd, CECEN) & MASK_CECEN) ? "yes" : "no");
|
|
v4l2_info(sd, "-----Signal status-----\n");
|
|
v4l2_info(sd, "TMDS signal detected: %s\n",
|
|
hdmi_sys_status & MASK_S_TMDS ? "yes" : "no");
|
|
v4l2_info(sd, "Stable sync signal: %s\n",
|
|
hdmi_sys_status & MASK_S_SYNC ? "yes" : "no");
|
|
v4l2_info(sd, "PHY PLL locked: %s\n",
|
|
hdmi_sys_status & MASK_S_PHY_PLL ? "yes" : "no");
|
|
v4l2_info(sd, "PHY DE detected: %s\n",
|
|
hdmi_sys_status & MASK_S_PHY_SCDT ? "yes" : "no");
|
|
|
|
if (tc358743_get_detected_timings(sd, &timings)) {
|
|
v4l2_info(sd, "No video detected\n");
|
|
} else {
|
|
v4l2_print_dv_timings(sd->name, "Detected format: ", &timings,
|
|
true);
|
|
}
|
|
v4l2_print_dv_timings(sd->name, "Configured format: ", &state->timings,
|
|
true);
|
|
|
|
v4l2_info(sd, "-----CSI-TX status-----\n");
|
|
v4l2_info(sd, "Lanes needed: %d\n",
|
|
tc358743_num_csi_lanes_needed(sd));
|
|
v4l2_info(sd, "Lanes in use: %d\n",
|
|
state->csi_lanes_in_use);
|
|
v4l2_info(sd, "Waiting for particular sync signal: %s\n",
|
|
(i2c_rd16(sd, CSI_STATUS) & MASK_S_WSYNC) ?
|
|
"yes" : "no");
|
|
v4l2_info(sd, "Transmit mode: %s\n",
|
|
(i2c_rd16(sd, CSI_STATUS) & MASK_S_TXACT) ?
|
|
"yes" : "no");
|
|
v4l2_info(sd, "Receive mode: %s\n",
|
|
(i2c_rd16(sd, CSI_STATUS) & MASK_S_RXACT) ?
|
|
"yes" : "no");
|
|
v4l2_info(sd, "Stopped: %s\n",
|
|
(i2c_rd16(sd, CSI_STATUS) & MASK_S_HLT) ?
|
|
"yes" : "no");
|
|
v4l2_info(sd, "Color space: %s\n",
|
|
state->mbus_fmt_code == MEDIA_BUS_FMT_UYVY8_1X16 ?
|
|
"YCbCr 422 16-bit" :
|
|
state->mbus_fmt_code == MEDIA_BUS_FMT_RGB888_1X24 ?
|
|
"RGB 888 24-bit" : "Unsupported");
|
|
|
|
v4l2_info(sd, "-----%s status-----\n", is_hdmi(sd) ? "HDMI" : "DVI-D");
|
|
v4l2_info(sd, "HDCP encrypted content: %s\n",
|
|
hdmi_sys_status & MASK_S_HDCP ? "yes" : "no");
|
|
v4l2_info(sd, "Input color space: %s %s range\n",
|
|
input_color_space[(vi_status3 & MASK_S_V_COLOR) >> 1],
|
|
(vi_status3 & MASK_LIMITED) ? "limited" : "full");
|
|
if (!is_hdmi(sd))
|
|
return 0;
|
|
v4l2_info(sd, "AV Mute: %s\n", hdmi_sys_status & MASK_S_AVMUTE ? "on" :
|
|
"off");
|
|
v4l2_info(sd, "Deep color mode: %d-bits per channel\n",
|
|
deep_color_mode[(i2c_rd8(sd, VI_STATUS1) &
|
|
MASK_S_DEEPCOLOR) >> 2]);
|
|
print_avi_infoframe(sd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
static void tc358743_print_register_map(struct v4l2_subdev *sd)
|
|
{
|
|
v4l2_info(sd, "0x0000-0x00FF: Global Control Register\n");
|
|
v4l2_info(sd, "0x0100-0x01FF: CSI2-TX PHY Register\n");
|
|
v4l2_info(sd, "0x0200-0x03FF: CSI2-TX PPI Register\n");
|
|
v4l2_info(sd, "0x0400-0x05FF: Reserved\n");
|
|
v4l2_info(sd, "0x0600-0x06FF: CEC Register\n");
|
|
v4l2_info(sd, "0x0700-0x84FF: Reserved\n");
|
|
v4l2_info(sd, "0x8500-0x85FF: HDMIRX System Control Register\n");
|
|
v4l2_info(sd, "0x8600-0x86FF: HDMIRX Audio Control Register\n");
|
|
v4l2_info(sd, "0x8700-0x87FF: HDMIRX InfoFrame packet data Register\n");
|
|
v4l2_info(sd, "0x8800-0x88FF: HDMIRX HDCP Port Register\n");
|
|
v4l2_info(sd, "0x8900-0x89FF: HDMIRX Video Output Port & 3D Register\n");
|
|
v4l2_info(sd, "0x8A00-0x8BFF: Reserved\n");
|
|
v4l2_info(sd, "0x8C00-0x8FFF: HDMIRX EDID-RAM (1024bytes)\n");
|
|
v4l2_info(sd, "0x9000-0x90FF: HDMIRX GBD Extraction Control\n");
|
|
v4l2_info(sd, "0x9100-0x92FF: HDMIRX GBD RAM read\n");
|
|
v4l2_info(sd, "0x9300- : Reserved\n");
|
|
}
|
|
|
|
static int tc358743_get_reg_size(u16 address)
|
|
{
|
|
/* REF_01 p. 66-72 */
|
|
if (address <= 0x00ff)
|
|
return 2;
|
|
else if ((address >= 0x0100) && (address <= 0x06FF))
|
|
return 4;
|
|
else if ((address >= 0x0700) && (address <= 0x84ff))
|
|
return 2;
|
|
else
|
|
return 1;
|
|
}
|
|
|
|
static int tc358743_g_register(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_register *reg)
|
|
{
|
|
if (reg->reg > 0xffff) {
|
|
tc358743_print_register_map(sd);
|
|
return -EINVAL;
|
|
}
|
|
|
|
reg->size = tc358743_get_reg_size(reg->reg);
|
|
|
|
i2c_rd(sd, reg->reg, (u8 *)®->val, reg->size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tc358743_s_register(struct v4l2_subdev *sd,
|
|
const struct v4l2_dbg_register *reg)
|
|
{
|
|
if (reg->reg > 0xffff) {
|
|
tc358743_print_register_map(sd);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* It should not be possible for the user to enable HDCP with a simple
|
|
* v4l2-dbg command.
|
|
*
|
|
* DO NOT REMOVE THIS unless all other issues with HDCP have been
|
|
* resolved.
|
|
*/
|
|
if (reg->reg == HDCP_MODE ||
|
|
reg->reg == HDCP_REG1 ||
|
|
reg->reg == HDCP_REG2 ||
|
|
reg->reg == HDCP_REG3 ||
|
|
reg->reg == BCAPS)
|
|
return 0;
|
|
|
|
i2c_wr(sd, (u16)reg->reg, (u8 *)®->val,
|
|
tc358743_get_reg_size(reg->reg));
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int tc358743_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
|
|
{
|
|
u16 intstatus = i2c_rd16(sd, INTSTATUS);
|
|
|
|
v4l2_dbg(1, debug, sd, "%s: IntStatus = 0x%04x\n", __func__, intstatus);
|
|
|
|
if (intstatus & MASK_HDMI_INT) {
|
|
u8 hdmi_int0 = i2c_rd8(sd, HDMI_INT0);
|
|
u8 hdmi_int1 = i2c_rd8(sd, HDMI_INT1);
|
|
|
|
if (hdmi_int0 & MASK_I_MISC)
|
|
tc358743_hdmi_misc_int_handler(sd, handled);
|
|
if (hdmi_int1 & MASK_I_CBIT)
|
|
tc358743_hdmi_cbit_int_handler(sd, handled);
|
|
if (hdmi_int1 & MASK_I_CLK)
|
|
tc358743_hdmi_clk_int_handler(sd, handled);
|
|
if (hdmi_int1 & MASK_I_SYS)
|
|
tc358743_hdmi_sys_int_handler(sd, handled);
|
|
if (hdmi_int1 & MASK_I_AUD)
|
|
tc358743_hdmi_audio_int_handler(sd, handled);
|
|
|
|
i2c_wr16(sd, INTSTATUS, MASK_HDMI_INT);
|
|
intstatus &= ~MASK_HDMI_INT;
|
|
}
|
|
|
|
if (intstatus & MASK_CSI_INT) {
|
|
u32 csi_int = i2c_rd32(sd, CSI_INT);
|
|
|
|
if (csi_int & MASK_INTER)
|
|
tc358743_csi_err_int_handler(sd, handled);
|
|
|
|
i2c_wr16(sd, INTSTATUS, MASK_CSI_INT);
|
|
intstatus &= ~MASK_CSI_INT;
|
|
}
|
|
|
|
intstatus = i2c_rd16(sd, INTSTATUS);
|
|
if (intstatus) {
|
|
v4l2_dbg(1, debug, sd,
|
|
"%s: Unhandled IntStatus interrupts: 0x%02x\n",
|
|
__func__, intstatus);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t tc358743_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct tc358743_state *state = dev_id;
|
|
bool handled;
|
|
|
|
tc358743_isr(&state->sd, 0, &handled);
|
|
|
|
return handled ? IRQ_HANDLED : IRQ_NONE;
|
|
}
|
|
|
|
static int tc358743_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
|
|
struct v4l2_event_subscription *sub)
|
|
{
|
|
switch (sub->type) {
|
|
case V4L2_EVENT_SOURCE_CHANGE:
|
|
return v4l2_src_change_event_subdev_subscribe(sd, fh, sub);
|
|
case V4L2_EVENT_CTRL:
|
|
return v4l2_ctrl_subdev_subscribe_event(sd, fh, sub);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* --------------- VIDEO OPS --------------- */
|
|
|
|
static int tc358743_g_input_status(struct v4l2_subdev *sd, u32 *status)
|
|
{
|
|
*status = 0;
|
|
*status |= no_signal(sd) ? V4L2_IN_ST_NO_SIGNAL : 0;
|
|
*status |= no_sync(sd) ? V4L2_IN_ST_NO_SYNC : 0;
|
|
|
|
v4l2_dbg(1, debug, sd, "%s: status = 0x%x\n", __func__, *status);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tc358743_s_dv_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings *timings)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
|
|
if (!timings)
|
|
return -EINVAL;
|
|
|
|
if (debug)
|
|
v4l2_print_dv_timings(sd->name, "tc358743_s_dv_timings: ",
|
|
timings, false);
|
|
|
|
if (v4l2_match_dv_timings(&state->timings, timings, 0, false)) {
|
|
v4l2_dbg(1, debug, sd, "%s: no change\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
if (!v4l2_valid_dv_timings(timings,
|
|
&tc358743_timings_cap, NULL, NULL)) {
|
|
v4l2_dbg(1, debug, sd, "%s: timings out of range\n", __func__);
|
|
return -ERANGE;
|
|
}
|
|
|
|
state->timings = *timings;
|
|
|
|
enable_stream(sd, false);
|
|
tc358743_set_pll(sd);
|
|
tc358743_set_csi(sd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tc358743_g_dv_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings *timings)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
|
|
*timings = state->timings;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tc358743_enum_dv_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_enum_dv_timings *timings)
|
|
{
|
|
if (timings->pad != 0)
|
|
return -EINVAL;
|
|
|
|
return v4l2_enum_dv_timings_cap(timings,
|
|
&tc358743_timings_cap, NULL, NULL);
|
|
}
|
|
|
|
static int tc358743_query_dv_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings *timings)
|
|
{
|
|
int ret;
|
|
|
|
ret = tc358743_get_detected_timings(sd, timings);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (debug)
|
|
v4l2_print_dv_timings(sd->name, "tc358743_query_dv_timings: ",
|
|
timings, false);
|
|
|
|
if (!v4l2_valid_dv_timings(timings,
|
|
&tc358743_timings_cap, NULL, NULL)) {
|
|
v4l2_dbg(1, debug, sd, "%s: timings out of range\n", __func__);
|
|
return -ERANGE;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tc358743_dv_timings_cap(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings_cap *cap)
|
|
{
|
|
if (cap->pad != 0)
|
|
return -EINVAL;
|
|
|
|
*cap = tc358743_timings_cap;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tc358743_g_mbus_config(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_config *cfg)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
|
|
cfg->type = V4L2_MBUS_CSI2;
|
|
|
|
/* Support for non-continuous CSI-2 clock is missing in the driver */
|
|
cfg->flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
|
|
|
|
switch (state->csi_lanes_in_use) {
|
|
case 1:
|
|
cfg->flags |= V4L2_MBUS_CSI2_1_LANE;
|
|
break;
|
|
case 2:
|
|
cfg->flags |= V4L2_MBUS_CSI2_2_LANE;
|
|
break;
|
|
case 3:
|
|
cfg->flags |= V4L2_MBUS_CSI2_3_LANE;
|
|
break;
|
|
case 4:
|
|
cfg->flags |= V4L2_MBUS_CSI2_4_LANE;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tc358743_s_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
enable_stream(sd, enable);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* --------------- PAD OPS --------------- */
|
|
|
|
static int tc358743_get_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
u8 vi_rep = i2c_rd8(sd, VI_REP);
|
|
|
|
if (format->pad != 0)
|
|
return -EINVAL;
|
|
|
|
format->format.code = state->mbus_fmt_code;
|
|
format->format.width = state->timings.bt.width;
|
|
format->format.height = state->timings.bt.height;
|
|
format->format.field = V4L2_FIELD_NONE;
|
|
|
|
switch (vi_rep & MASK_VOUT_COLOR_SEL) {
|
|
case MASK_VOUT_COLOR_RGB_FULL:
|
|
case MASK_VOUT_COLOR_RGB_LIMITED:
|
|
format->format.colorspace = V4L2_COLORSPACE_SRGB;
|
|
break;
|
|
case MASK_VOUT_COLOR_601_YCBCR_LIMITED:
|
|
case MASK_VOUT_COLOR_601_YCBCR_FULL:
|
|
format->format.colorspace = V4L2_COLORSPACE_SMPTE170M;
|
|
break;
|
|
case MASK_VOUT_COLOR_709_YCBCR_FULL:
|
|
case MASK_VOUT_COLOR_709_YCBCR_LIMITED:
|
|
format->format.colorspace = V4L2_COLORSPACE_REC709;
|
|
break;
|
|
default:
|
|
format->format.colorspace = 0;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tc358743_set_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
|
|
u32 code = format->format.code; /* is overwritten by get_fmt */
|
|
int ret = tc358743_get_fmt(sd, cfg, format);
|
|
|
|
format->format.code = code;
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (code) {
|
|
case MEDIA_BUS_FMT_RGB888_1X24:
|
|
case MEDIA_BUS_FMT_UYVY8_1X16:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (format->which == V4L2_SUBDEV_FORMAT_TRY)
|
|
return 0;
|
|
|
|
state->mbus_fmt_code = format->format.code;
|
|
|
|
enable_stream(sd, false);
|
|
tc358743_set_pll(sd);
|
|
tc358743_set_csi(sd);
|
|
tc358743_set_csi_color_space(sd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tc358743_g_edid(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_edid *edid)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
|
|
memset(edid->reserved, 0, sizeof(edid->reserved));
|
|
|
|
if (edid->pad != 0)
|
|
return -EINVAL;
|
|
|
|
if (edid->start_block == 0 && edid->blocks == 0) {
|
|
edid->blocks = state->edid_blocks_written;
|
|
return 0;
|
|
}
|
|
|
|
if (state->edid_blocks_written == 0)
|
|
return -ENODATA;
|
|
|
|
if (edid->start_block >= state->edid_blocks_written ||
|
|
edid->blocks == 0)
|
|
return -EINVAL;
|
|
|
|
if (edid->start_block + edid->blocks > state->edid_blocks_written)
|
|
edid->blocks = state->edid_blocks_written - edid->start_block;
|
|
|
|
i2c_rd(sd, EDID_RAM + (edid->start_block * EDID_BLOCK_SIZE), edid->edid,
|
|
edid->blocks * EDID_BLOCK_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tc358743_s_edid(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_edid *edid)
|
|
{
|
|
struct tc358743_state *state = to_state(sd);
|
|
u16 edid_len = edid->blocks * EDID_BLOCK_SIZE;
|
|
int i;
|
|
|
|
v4l2_dbg(2, debug, sd, "%s, pad %d, start block %d, blocks %d\n",
|
|
__func__, edid->pad, edid->start_block, edid->blocks);
|
|
|
|
memset(edid->reserved, 0, sizeof(edid->reserved));
|
|
|
|
if (edid->pad != 0)
|
|
return -EINVAL;
|
|
|
|
if (edid->start_block != 0)
|
|
return -EINVAL;
|
|
|
|
if (edid->blocks > EDID_NUM_BLOCKS_MAX) {
|
|
edid->blocks = EDID_NUM_BLOCKS_MAX;
|
|
return -E2BIG;
|
|
}
|
|
|
|
tc358743_disable_edid(sd);
|
|
|
|
i2c_wr8(sd, EDID_LEN1, edid_len & 0xff);
|
|
i2c_wr8(sd, EDID_LEN2, edid_len >> 8);
|
|
|
|
if (edid->blocks == 0) {
|
|
state->edid_blocks_written = 0;
|
|
return 0;
|
|
}
|
|
|
|
for (i = 0; i < edid_len; i += EDID_BLOCK_SIZE)
|
|
i2c_wr(sd, EDID_RAM + i, edid->edid + i, EDID_BLOCK_SIZE);
|
|
|
|
state->edid_blocks_written = edid->blocks;
|
|
|
|
if (tx_5v_power_present(sd))
|
|
tc358743_enable_edid(sd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
|
|
static const struct v4l2_subdev_core_ops tc358743_core_ops = {
|
|
.log_status = tc358743_log_status,
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
.g_register = tc358743_g_register,
|
|
.s_register = tc358743_s_register,
|
|
#endif
|
|
.interrupt_service_routine = tc358743_isr,
|
|
.subscribe_event = tc358743_subscribe_event,
|
|
.unsubscribe_event = v4l2_event_subdev_unsubscribe,
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops tc358743_video_ops = {
|
|
.g_input_status = tc358743_g_input_status,
|
|
.s_dv_timings = tc358743_s_dv_timings,
|
|
.g_dv_timings = tc358743_g_dv_timings,
|
|
.query_dv_timings = tc358743_query_dv_timings,
|
|
.g_mbus_config = tc358743_g_mbus_config,
|
|
.s_stream = tc358743_s_stream,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops tc358743_pad_ops = {
|
|
.set_fmt = tc358743_set_fmt,
|
|
.get_fmt = tc358743_get_fmt,
|
|
.get_edid = tc358743_g_edid,
|
|
.set_edid = tc358743_s_edid,
|
|
.enum_dv_timings = tc358743_enum_dv_timings,
|
|
.dv_timings_cap = tc358743_dv_timings_cap,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops tc358743_ops = {
|
|
.core = &tc358743_core_ops,
|
|
.video = &tc358743_video_ops,
|
|
.pad = &tc358743_pad_ops,
|
|
};
|
|
|
|
/* --------------- CUSTOM CTRLS --------------- */
|
|
|
|
static const struct v4l2_ctrl_config tc358743_ctrl_audio_sampling_rate = {
|
|
.id = TC358743_CID_AUDIO_SAMPLING_RATE,
|
|
.name = "Audio sampling rate",
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.min = 0,
|
|
.max = 768000,
|
|
.step = 1,
|
|
.def = 0,
|
|
.flags = V4L2_CTRL_FLAG_READ_ONLY,
|
|
};
|
|
|
|
static const struct v4l2_ctrl_config tc358743_ctrl_audio_present = {
|
|
.id = TC358743_CID_AUDIO_PRESENT,
|
|
.name = "Audio present",
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
.min = 0,
|
|
.max = 1,
|
|
.step = 1,
|
|
.def = 0,
|
|
.flags = V4L2_CTRL_FLAG_READ_ONLY,
|
|
};
|
|
|
|
/* --------------- PROBE / REMOVE --------------- */
|
|
|
|
#ifdef CONFIG_OF
|
|
static void tc358743_gpio_reset(struct tc358743_state *state)
|
|
{
|
|
usleep_range(5000, 10000);
|
|
gpiod_set_value(state->reset_gpio, 1);
|
|
usleep_range(1000, 2000);
|
|
gpiod_set_value(state->reset_gpio, 0);
|
|
msleep(20);
|
|
}
|
|
|
|
static int tc358743_probe_of(struct tc358743_state *state)
|
|
{
|
|
struct device *dev = &state->i2c_client->dev;
|
|
struct v4l2_of_endpoint *endpoint;
|
|
struct device_node *ep;
|
|
struct clk *refclk;
|
|
u32 bps_pr_lane;
|
|
int ret = -EINVAL;
|
|
|
|
refclk = devm_clk_get(dev, "refclk");
|
|
if (IS_ERR(refclk)) {
|
|
if (PTR_ERR(refclk) != -EPROBE_DEFER)
|
|
dev_err(dev, "failed to get refclk: %ld\n",
|
|
PTR_ERR(refclk));
|
|
return PTR_ERR(refclk);
|
|
}
|
|
|
|
ep = of_graph_get_next_endpoint(dev->of_node, NULL);
|
|
if (!ep) {
|
|
dev_err(dev, "missing endpoint node\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
endpoint = v4l2_of_alloc_parse_endpoint(ep);
|
|
if (IS_ERR(endpoint)) {
|
|
dev_err(dev, "failed to parse endpoint\n");
|
|
return PTR_ERR(endpoint);
|
|
}
|
|
|
|
if (endpoint->bus_type != V4L2_MBUS_CSI2 ||
|
|
endpoint->bus.mipi_csi2.num_data_lanes == 0 ||
|
|
endpoint->nr_of_link_frequencies == 0) {
|
|
dev_err(dev, "missing CSI-2 properties in endpoint\n");
|
|
goto free_endpoint;
|
|
}
|
|
|
|
state->bus = endpoint->bus.mipi_csi2;
|
|
|
|
clk_prepare_enable(refclk);
|
|
|
|
state->pdata.refclk_hz = clk_get_rate(refclk);
|
|
state->pdata.ddc5v_delay = DDC5V_DELAY_100_MS;
|
|
state->pdata.enable_hdcp = false;
|
|
/* A FIFO level of 16 should be enough for 2-lane 720p60 at 594 MHz. */
|
|
state->pdata.fifo_level = 16;
|
|
/*
|
|
* The PLL input clock is obtained by dividing refclk by pll_prd.
|
|
* It must be between 6 MHz and 40 MHz, lower frequency is better.
|
|
*/
|
|
switch (state->pdata.refclk_hz) {
|
|
case 26000000:
|
|
case 27000000:
|
|
case 42000000:
|
|
state->pdata.pll_prd = state->pdata.refclk_hz / 6000000;
|
|
break;
|
|
default:
|
|
dev_err(dev, "unsupported refclk rate: %u Hz\n",
|
|
state->pdata.refclk_hz);
|
|
goto disable_clk;
|
|
}
|
|
|
|
/*
|
|
* The CSI bps per lane must be between 62.5 Mbps and 1 Gbps.
|
|
* The default is 594 Mbps for 4-lane 1080p60 or 2-lane 720p60.
|
|
*/
|
|
bps_pr_lane = 2 * endpoint->link_frequencies[0];
|
|
if (bps_pr_lane < 62500000U || bps_pr_lane > 1000000000U) {
|
|
dev_err(dev, "unsupported bps per lane: %u bps\n", bps_pr_lane);
|
|
goto disable_clk;
|
|
}
|
|
|
|
/* The CSI speed per lane is refclk / pll_prd * pll_fbd */
|
|
state->pdata.pll_fbd = bps_pr_lane /
|
|
state->pdata.refclk_hz * state->pdata.pll_prd;
|
|
|
|
/*
|
|
* FIXME: These timings are from REF_02 for 594 Mbps per lane (297 MHz
|
|
* link frequency). In principle it should be possible to calculate
|
|
* them based on link frequency and resolution.
|
|
*/
|
|
if (bps_pr_lane != 594000000U)
|
|
dev_warn(dev, "untested bps per lane: %u bps\n", bps_pr_lane);
|
|
state->pdata.lineinitcnt = 0xe80;
|
|
state->pdata.lptxtimecnt = 0x003;
|
|
/* tclk-preparecnt: 3, tclk-zerocnt: 20 */
|
|
state->pdata.tclk_headercnt = 0x1403;
|
|
state->pdata.tclk_trailcnt = 0x00;
|
|
/* ths-preparecnt: 3, ths-zerocnt: 1 */
|
|
state->pdata.ths_headercnt = 0x0103;
|
|
state->pdata.twakeup = 0x4882;
|
|
state->pdata.tclk_postcnt = 0x008;
|
|
state->pdata.ths_trailcnt = 0x2;
|
|
state->pdata.hstxvregcnt = 0;
|
|
|
|
state->reset_gpio = devm_gpiod_get_optional(dev, "reset",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(state->reset_gpio)) {
|
|
dev_err(dev, "failed to get reset gpio\n");
|
|
ret = PTR_ERR(state->reset_gpio);
|
|
goto disable_clk;
|
|
}
|
|
|
|
if (state->reset_gpio)
|
|
tc358743_gpio_reset(state);
|
|
|
|
ret = 0;
|
|
goto free_endpoint;
|
|
|
|
disable_clk:
|
|
clk_disable_unprepare(refclk);
|
|
free_endpoint:
|
|
v4l2_of_free_endpoint(endpoint);
|
|
return ret;
|
|
}
|
|
#else
|
|
static inline int tc358743_probe_of(struct tc358743_state *state)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif
|
|
|
|
static int tc358743_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
static struct v4l2_dv_timings default_timing =
|
|
V4L2_DV_BT_CEA_640X480P59_94;
|
|
struct tc358743_state *state;
|
|
struct tc358743_platform_data *pdata = client->dev.platform_data;
|
|
struct v4l2_subdev *sd;
|
|
int err;
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -EIO;
|
|
v4l_dbg(1, debug, client, "chip found @ 0x%x (%s)\n",
|
|
client->addr << 1, client->adapter->name);
|
|
|
|
state = devm_kzalloc(&client->dev, sizeof(struct tc358743_state),
|
|
GFP_KERNEL);
|
|
if (!state)
|
|
return -ENOMEM;
|
|
|
|
state->i2c_client = client;
|
|
|
|
/* platform data */
|
|
if (pdata) {
|
|
state->pdata = *pdata;
|
|
state->bus.flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
|
|
} else {
|
|
err = tc358743_probe_of(state);
|
|
if (err == -ENODEV)
|
|
v4l_err(client, "No platform data!\n");
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
sd = &state->sd;
|
|
v4l2_i2c_subdev_init(sd, client, &tc358743_ops);
|
|
sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
|
|
|
|
/* i2c access */
|
|
if ((i2c_rd16(sd, CHIPID) & MASK_CHIPID) != 0) {
|
|
v4l2_info(sd, "not a TC358743 on address 0x%x\n",
|
|
client->addr << 1);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* control handlers */
|
|
v4l2_ctrl_handler_init(&state->hdl, 3);
|
|
|
|
state->detect_tx_5v_ctrl = v4l2_ctrl_new_std(&state->hdl, NULL,
|
|
V4L2_CID_DV_RX_POWER_PRESENT, 0, 1, 0, 0);
|
|
|
|
/* custom controls */
|
|
state->audio_sampling_rate_ctrl = v4l2_ctrl_new_custom(&state->hdl,
|
|
&tc358743_ctrl_audio_sampling_rate, NULL);
|
|
|
|
state->audio_present_ctrl = v4l2_ctrl_new_custom(&state->hdl,
|
|
&tc358743_ctrl_audio_present, NULL);
|
|
|
|
sd->ctrl_handler = &state->hdl;
|
|
if (state->hdl.error) {
|
|
err = state->hdl.error;
|
|
goto err_hdl;
|
|
}
|
|
|
|
if (tc358743_update_controls(sd)) {
|
|
err = -ENODEV;
|
|
goto err_hdl;
|
|
}
|
|
|
|
state->pad.flags = MEDIA_PAD_FL_SOURCE;
|
|
err = media_entity_pads_init(&sd->entity, 1, &state->pad);
|
|
if (err < 0)
|
|
goto err_hdl;
|
|
|
|
sd->dev = &client->dev;
|
|
err = v4l2_async_register_subdev(sd);
|
|
if (err < 0)
|
|
goto err_hdl;
|
|
|
|
mutex_init(&state->confctl_mutex);
|
|
|
|
INIT_DELAYED_WORK(&state->delayed_work_enable_hotplug,
|
|
tc358743_delayed_work_enable_hotplug);
|
|
|
|
tc358743_initial_setup(sd);
|
|
|
|
tc358743_s_dv_timings(sd, &default_timing);
|
|
|
|
state->mbus_fmt_code = MEDIA_BUS_FMT_RGB888_1X24;
|
|
tc358743_set_csi_color_space(sd);
|
|
|
|
tc358743_init_interrupts(sd);
|
|
|
|
if (state->i2c_client->irq) {
|
|
err = devm_request_threaded_irq(&client->dev,
|
|
state->i2c_client->irq,
|
|
NULL, tc358743_irq_handler,
|
|
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
|
|
"tc358743", state);
|
|
if (err)
|
|
goto err_work_queues;
|
|
}
|
|
|
|
tc358743_enable_interrupts(sd, tx_5v_power_present(sd));
|
|
i2c_wr16(sd, INTMASK, ~(MASK_HDMI_MSK | MASK_CSI_MSK) & 0xffff);
|
|
|
|
err = v4l2_ctrl_handler_setup(sd->ctrl_handler);
|
|
if (err)
|
|
goto err_work_queues;
|
|
|
|
v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
|
|
client->addr << 1, client->adapter->name);
|
|
|
|
return 0;
|
|
|
|
err_work_queues:
|
|
cancel_delayed_work(&state->delayed_work_enable_hotplug);
|
|
mutex_destroy(&state->confctl_mutex);
|
|
err_hdl:
|
|
media_entity_cleanup(&sd->entity);
|
|
v4l2_ctrl_handler_free(&state->hdl);
|
|
return err;
|
|
}
|
|
|
|
static int tc358743_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct tc358743_state *state = to_state(sd);
|
|
|
|
cancel_delayed_work(&state->delayed_work_enable_hotplug);
|
|
v4l2_async_unregister_subdev(sd);
|
|
v4l2_device_unregister_subdev(sd);
|
|
mutex_destroy(&state->confctl_mutex);
|
|
media_entity_cleanup(&sd->entity);
|
|
v4l2_ctrl_handler_free(&state->hdl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct i2c_device_id tc358743_id[] = {
|
|
{"tc358743", 0},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, tc358743_id);
|
|
|
|
static struct i2c_driver tc358743_driver = {
|
|
.driver = {
|
|
.name = "tc358743",
|
|
},
|
|
.probe = tc358743_probe,
|
|
.remove = tc358743_remove,
|
|
.id_table = tc358743_id,
|
|
};
|
|
|
|
module_i2c_driver(tc358743_driver);
|