mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-17 01:04:19 +08:00
288379f050
Following the removal of the unused struct net_device * parameter from
the NAPI functions named *netif_rx_* in commit 908a7a1
, they are
exactly equivalent to the corresponding *napi_* functions and are
therefore redundant.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017 lines
52 KiB
C
2017 lines
52 KiB
C
|
|
/* Advanced Micro Devices Inc. AMD8111E Linux Network Driver
|
|
* Copyright (C) 2004 Advanced Micro Devices
|
|
*
|
|
*
|
|
* Copyright 2001,2002 Jeff Garzik <jgarzik@mandrakesoft.com> [ 8139cp.c,tg3.c ]
|
|
* Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com)[ tg3.c]
|
|
* Copyright 1996-1999 Thomas Bogendoerfer [ pcnet32.c ]
|
|
* Derived from the lance driver written 1993,1994,1995 by Donald Becker.
|
|
* Copyright 1993 United States Government as represented by the
|
|
* Director, National Security Agency.[ pcnet32.c ]
|
|
* Carsten Langgaard, carstenl@mips.com [ pcnet32.c ]
|
|
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
|
|
* USA
|
|
|
|
Module Name:
|
|
|
|
amd8111e.c
|
|
|
|
Abstract:
|
|
|
|
AMD8111 based 10/100 Ethernet Controller Driver.
|
|
|
|
Environment:
|
|
|
|
Kernel Mode
|
|
|
|
Revision History:
|
|
3.0.0
|
|
Initial Revision.
|
|
3.0.1
|
|
1. Dynamic interrupt coalescing.
|
|
2. Removed prev_stats.
|
|
3. MII support.
|
|
4. Dynamic IPG support
|
|
3.0.2 05/29/2003
|
|
1. Bug fix: Fixed failure to send jumbo packets larger than 4k.
|
|
2. Bug fix: Fixed VLAN support failure.
|
|
3. Bug fix: Fixed receive interrupt coalescing bug.
|
|
4. Dynamic IPG support is disabled by default.
|
|
3.0.3 06/05/2003
|
|
1. Bug fix: Fixed failure to close the interface if SMP is enabled.
|
|
3.0.4 12/09/2003
|
|
1. Added set_mac_address routine for bonding driver support.
|
|
2. Tested the driver for bonding support
|
|
3. Bug fix: Fixed mismach in actual receive buffer lenth and lenth
|
|
indicated to the h/w.
|
|
4. Modified amd8111e_rx() routine to receive all the received packets
|
|
in the first interrupt.
|
|
5. Bug fix: Corrected rx_errors reported in get_stats() function.
|
|
3.0.5 03/22/2004
|
|
1. Added NAPI support
|
|
|
|
*/
|
|
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/io.h>
|
|
#include <asm/byteorder.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
|
|
#define AMD8111E_VLAN_TAG_USED 1
|
|
#else
|
|
#define AMD8111E_VLAN_TAG_USED 0
|
|
#endif
|
|
|
|
#include "amd8111e.h"
|
|
#define MODULE_NAME "amd8111e"
|
|
#define MODULE_VERS "3.0.7"
|
|
MODULE_AUTHOR("Advanced Micro Devices, Inc.");
|
|
MODULE_DESCRIPTION ("AMD8111 based 10/100 Ethernet Controller. Driver Version "MODULE_VERS);
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl);
|
|
module_param_array(speed_duplex, int, NULL, 0);
|
|
MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotitate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex");
|
|
module_param_array(coalesce, bool, NULL, 0);
|
|
MODULE_PARM_DESC(coalesce, "Enable or Disable interrupt coalescing, 1: Enable, 0: Disable");
|
|
module_param_array(dynamic_ipg, bool, NULL, 0);
|
|
MODULE_PARM_DESC(dynamic_ipg, "Enable or Disable dynamic IPG, 1: Enable, 0: Disable");
|
|
|
|
static struct pci_device_id amd8111e_pci_tbl[] = {
|
|
|
|
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD8111E_7462,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
|
|
{ 0, }
|
|
|
|
};
|
|
/*
|
|
This function will read the PHY registers.
|
|
*/
|
|
static int amd8111e_read_phy(struct amd8111e_priv* lp, int phy_id, int reg, u32* val)
|
|
{
|
|
void __iomem *mmio = lp->mmio;
|
|
unsigned int reg_val;
|
|
unsigned int repeat= REPEAT_CNT;
|
|
|
|
reg_val = readl(mmio + PHY_ACCESS);
|
|
while (reg_val & PHY_CMD_ACTIVE)
|
|
reg_val = readl( mmio + PHY_ACCESS );
|
|
|
|
writel( PHY_RD_CMD | ((phy_id & 0x1f) << 21) |
|
|
((reg & 0x1f) << 16), mmio +PHY_ACCESS);
|
|
do{
|
|
reg_val = readl(mmio + PHY_ACCESS);
|
|
udelay(30); /* It takes 30 us to read/write data */
|
|
} while (--repeat && (reg_val & PHY_CMD_ACTIVE));
|
|
if(reg_val & PHY_RD_ERR)
|
|
goto err_phy_read;
|
|
|
|
*val = reg_val & 0xffff;
|
|
return 0;
|
|
err_phy_read:
|
|
*val = 0;
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
/*
|
|
This function will write into PHY registers.
|
|
*/
|
|
static int amd8111e_write_phy(struct amd8111e_priv* lp,int phy_id, int reg, u32 val)
|
|
{
|
|
unsigned int repeat = REPEAT_CNT;
|
|
void __iomem *mmio = lp->mmio;
|
|
unsigned int reg_val;
|
|
|
|
reg_val = readl(mmio + PHY_ACCESS);
|
|
while (reg_val & PHY_CMD_ACTIVE)
|
|
reg_val = readl( mmio + PHY_ACCESS );
|
|
|
|
writel( PHY_WR_CMD | ((phy_id & 0x1f) << 21) |
|
|
((reg & 0x1f) << 16)|val, mmio + PHY_ACCESS);
|
|
|
|
do{
|
|
reg_val = readl(mmio + PHY_ACCESS);
|
|
udelay(30); /* It takes 30 us to read/write the data */
|
|
} while (--repeat && (reg_val & PHY_CMD_ACTIVE));
|
|
|
|
if(reg_val & PHY_RD_ERR)
|
|
goto err_phy_write;
|
|
|
|
return 0;
|
|
|
|
err_phy_write:
|
|
return -EINVAL;
|
|
|
|
}
|
|
/*
|
|
This is the mii register read function provided to the mii interface.
|
|
*/
|
|
static int amd8111e_mdio_read(struct net_device * dev, int phy_id, int reg_num)
|
|
{
|
|
struct amd8111e_priv* lp = netdev_priv(dev);
|
|
unsigned int reg_val;
|
|
|
|
amd8111e_read_phy(lp,phy_id,reg_num,®_val);
|
|
return reg_val;
|
|
|
|
}
|
|
|
|
/*
|
|
This is the mii register write function provided to the mii interface.
|
|
*/
|
|
static void amd8111e_mdio_write(struct net_device * dev, int phy_id, int reg_num, int val)
|
|
{
|
|
struct amd8111e_priv* lp = netdev_priv(dev);
|
|
|
|
amd8111e_write_phy(lp, phy_id, reg_num, val);
|
|
}
|
|
|
|
/*
|
|
This function will set PHY speed. During initialization sets the original speed to 100 full.
|
|
*/
|
|
static void amd8111e_set_ext_phy(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
u32 bmcr,advert,tmp;
|
|
|
|
/* Determine mii register values to set the speed */
|
|
advert = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_ADVERTISE);
|
|
tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
|
|
switch (lp->ext_phy_option){
|
|
|
|
default:
|
|
case SPEED_AUTONEG: /* advertise all values */
|
|
tmp |= ( ADVERTISE_10HALF|ADVERTISE_10FULL|
|
|
ADVERTISE_100HALF|ADVERTISE_100FULL) ;
|
|
break;
|
|
case SPEED10_HALF:
|
|
tmp |= ADVERTISE_10HALF;
|
|
break;
|
|
case SPEED10_FULL:
|
|
tmp |= ADVERTISE_10FULL;
|
|
break;
|
|
case SPEED100_HALF:
|
|
tmp |= ADVERTISE_100HALF;
|
|
break;
|
|
case SPEED100_FULL:
|
|
tmp |= ADVERTISE_100FULL;
|
|
break;
|
|
}
|
|
|
|
if(advert != tmp)
|
|
amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_ADVERTISE, tmp);
|
|
/* Restart auto negotiation */
|
|
bmcr = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_BMCR);
|
|
bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
|
|
amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_BMCR, bmcr);
|
|
|
|
}
|
|
|
|
/*
|
|
This function will unmap skb->data space and will free
|
|
all transmit and receive skbuffs.
|
|
*/
|
|
static int amd8111e_free_skbs(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
struct sk_buff* rx_skbuff;
|
|
int i;
|
|
|
|
/* Freeing transmit skbs */
|
|
for(i = 0; i < NUM_TX_BUFFERS; i++){
|
|
if(lp->tx_skbuff[i]){
|
|
pci_unmap_single(lp->pci_dev,lp->tx_dma_addr[i], lp->tx_skbuff[i]->len,PCI_DMA_TODEVICE);
|
|
dev_kfree_skb (lp->tx_skbuff[i]);
|
|
lp->tx_skbuff[i] = NULL;
|
|
lp->tx_dma_addr[i] = 0;
|
|
}
|
|
}
|
|
/* Freeing previously allocated receive buffers */
|
|
for (i = 0; i < NUM_RX_BUFFERS; i++){
|
|
rx_skbuff = lp->rx_skbuff[i];
|
|
if(rx_skbuff != NULL){
|
|
pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[i],
|
|
lp->rx_buff_len - 2,PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb(lp->rx_skbuff[i]);
|
|
lp->rx_skbuff[i] = NULL;
|
|
lp->rx_dma_addr[i] = 0;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
This will set the receive buffer length corresponding to the mtu size of networkinterface.
|
|
*/
|
|
static inline void amd8111e_set_rx_buff_len(struct net_device* dev)
|
|
{
|
|
struct amd8111e_priv* lp = netdev_priv(dev);
|
|
unsigned int mtu = dev->mtu;
|
|
|
|
if (mtu > ETH_DATA_LEN){
|
|
/* MTU + ethernet header + FCS
|
|
+ optional VLAN tag + skb reserve space 2 */
|
|
|
|
lp->rx_buff_len = mtu + ETH_HLEN + 10;
|
|
lp->options |= OPTION_JUMBO_ENABLE;
|
|
} else{
|
|
lp->rx_buff_len = PKT_BUFF_SZ;
|
|
lp->options &= ~OPTION_JUMBO_ENABLE;
|
|
}
|
|
}
|
|
|
|
/*
|
|
This function will free all the previously allocated buffers, determine new receive buffer length and will allocate new receive buffers. This function also allocates and initializes both the transmitter and receive hardware descriptors.
|
|
*/
|
|
static int amd8111e_init_ring(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
int i;
|
|
|
|
lp->rx_idx = lp->tx_idx = 0;
|
|
lp->tx_complete_idx = 0;
|
|
lp->tx_ring_idx = 0;
|
|
|
|
|
|
if(lp->opened)
|
|
/* Free previously allocated transmit and receive skbs */
|
|
amd8111e_free_skbs(dev);
|
|
|
|
else{
|
|
/* allocate the tx and rx descriptors */
|
|
if((lp->tx_ring = pci_alloc_consistent(lp->pci_dev,
|
|
sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,
|
|
&lp->tx_ring_dma_addr)) == NULL)
|
|
|
|
goto err_no_mem;
|
|
|
|
if((lp->rx_ring = pci_alloc_consistent(lp->pci_dev,
|
|
sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,
|
|
&lp->rx_ring_dma_addr)) == NULL)
|
|
|
|
goto err_free_tx_ring;
|
|
|
|
}
|
|
/* Set new receive buff size */
|
|
amd8111e_set_rx_buff_len(dev);
|
|
|
|
/* Allocating receive skbs */
|
|
for (i = 0; i < NUM_RX_BUFFERS; i++) {
|
|
|
|
if (!(lp->rx_skbuff[i] = dev_alloc_skb(lp->rx_buff_len))) {
|
|
/* Release previos allocated skbs */
|
|
for(--i; i >= 0 ;i--)
|
|
dev_kfree_skb(lp->rx_skbuff[i]);
|
|
goto err_free_rx_ring;
|
|
}
|
|
skb_reserve(lp->rx_skbuff[i],2);
|
|
}
|
|
/* Initilaizing receive descriptors */
|
|
for (i = 0; i < NUM_RX_BUFFERS; i++) {
|
|
lp->rx_dma_addr[i] = pci_map_single(lp->pci_dev,
|
|
lp->rx_skbuff[i]->data,lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
|
|
|
|
lp->rx_ring[i].buff_phy_addr = cpu_to_le32(lp->rx_dma_addr[i]);
|
|
lp->rx_ring[i].buff_count = cpu_to_le16(lp->rx_buff_len-2);
|
|
wmb();
|
|
lp->rx_ring[i].rx_flags = cpu_to_le16(OWN_BIT);
|
|
}
|
|
|
|
/* Initializing transmit descriptors */
|
|
for (i = 0; i < NUM_TX_RING_DR; i++) {
|
|
lp->tx_ring[i].buff_phy_addr = 0;
|
|
lp->tx_ring[i].tx_flags = 0;
|
|
lp->tx_ring[i].buff_count = 0;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_free_rx_ring:
|
|
|
|
pci_free_consistent(lp->pci_dev,
|
|
sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,lp->rx_ring,
|
|
lp->rx_ring_dma_addr);
|
|
|
|
err_free_tx_ring:
|
|
|
|
pci_free_consistent(lp->pci_dev,
|
|
sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,lp->tx_ring,
|
|
lp->tx_ring_dma_addr);
|
|
|
|
err_no_mem:
|
|
return -ENOMEM;
|
|
}
|
|
/* This function will set the interrupt coalescing according to the input arguments */
|
|
static int amd8111e_set_coalesce(struct net_device * dev, enum coal_mode cmod)
|
|
{
|
|
unsigned int timeout;
|
|
unsigned int event_count;
|
|
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
void __iomem *mmio = lp->mmio;
|
|
struct amd8111e_coalesce_conf * coal_conf = &lp->coal_conf;
|
|
|
|
|
|
switch(cmod)
|
|
{
|
|
case RX_INTR_COAL :
|
|
timeout = coal_conf->rx_timeout;
|
|
event_count = coal_conf->rx_event_count;
|
|
if( timeout > MAX_TIMEOUT ||
|
|
event_count > MAX_EVENT_COUNT )
|
|
return -EINVAL;
|
|
|
|
timeout = timeout * DELAY_TIMER_CONV;
|
|
writel(VAL0|STINTEN, mmio+INTEN0);
|
|
writel((u32)DLY_INT_A_R0|( event_count<< 16 )|timeout,
|
|
mmio+DLY_INT_A);
|
|
break;
|
|
|
|
case TX_INTR_COAL :
|
|
timeout = coal_conf->tx_timeout;
|
|
event_count = coal_conf->tx_event_count;
|
|
if( timeout > MAX_TIMEOUT ||
|
|
event_count > MAX_EVENT_COUNT )
|
|
return -EINVAL;
|
|
|
|
|
|
timeout = timeout * DELAY_TIMER_CONV;
|
|
writel(VAL0|STINTEN,mmio+INTEN0);
|
|
writel((u32)DLY_INT_B_T0|( event_count<< 16 )|timeout,
|
|
mmio+DLY_INT_B);
|
|
break;
|
|
|
|
case DISABLE_COAL:
|
|
writel(0,mmio+STVAL);
|
|
writel(STINTEN, mmio+INTEN0);
|
|
writel(0, mmio +DLY_INT_B);
|
|
writel(0, mmio+DLY_INT_A);
|
|
break;
|
|
case ENABLE_COAL:
|
|
/* Start the timer */
|
|
writel((u32)SOFT_TIMER_FREQ, mmio+STVAL); /* 0.5 sec */
|
|
writel(VAL0|STINTEN, mmio+INTEN0);
|
|
break;
|
|
default:
|
|
break;
|
|
|
|
}
|
|
return 0;
|
|
|
|
}
|
|
|
|
/*
|
|
This function initializes the device registers and starts the device.
|
|
*/
|
|
static int amd8111e_restart(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
void __iomem *mmio = lp->mmio;
|
|
int i,reg_val;
|
|
|
|
/* stop the chip */
|
|
writel(RUN, mmio + CMD0);
|
|
|
|
if(amd8111e_init_ring(dev))
|
|
return -ENOMEM;
|
|
|
|
/* enable the port manager and set auto negotiation always */
|
|
writel((u32) VAL1|EN_PMGR, mmio + CMD3 );
|
|
writel((u32)XPHYANE|XPHYRST , mmio + CTRL2);
|
|
|
|
amd8111e_set_ext_phy(dev);
|
|
|
|
/* set control registers */
|
|
reg_val = readl(mmio + CTRL1);
|
|
reg_val &= ~XMTSP_MASK;
|
|
writel( reg_val| XMTSP_128 | CACHE_ALIGN, mmio + CTRL1 );
|
|
|
|
/* enable interrupt */
|
|
writel( APINT5EN | APINT4EN | APINT3EN | APINT2EN | APINT1EN |
|
|
APINT0EN | MIIPDTINTEN | MCCIINTEN | MCCINTEN | MREINTEN |
|
|
SPNDINTEN | MPINTEN | SINTEN | STINTEN, mmio + INTEN0);
|
|
|
|
writel(VAL3 | LCINTEN | VAL1 | TINTEN0 | VAL0 | RINTEN0, mmio + INTEN0);
|
|
|
|
/* initialize tx and rx ring base addresses */
|
|
writel((u32)lp->tx_ring_dma_addr,mmio + XMT_RING_BASE_ADDR0);
|
|
writel((u32)lp->rx_ring_dma_addr,mmio+ RCV_RING_BASE_ADDR0);
|
|
|
|
writew((u32)NUM_TX_RING_DR, mmio + XMT_RING_LEN0);
|
|
writew((u16)NUM_RX_RING_DR, mmio + RCV_RING_LEN0);
|
|
|
|
/* set default IPG to 96 */
|
|
writew((u32)DEFAULT_IPG,mmio+IPG);
|
|
writew((u32)(DEFAULT_IPG-IFS1_DELTA), mmio + IFS1);
|
|
|
|
if(lp->options & OPTION_JUMBO_ENABLE){
|
|
writel((u32)VAL2|JUMBO, mmio + CMD3);
|
|
/* Reset REX_UFLO */
|
|
writel( REX_UFLO, mmio + CMD2);
|
|
/* Should not set REX_UFLO for jumbo frames */
|
|
writel( VAL0 | APAD_XMT|REX_RTRY , mmio + CMD2);
|
|
}else{
|
|
writel( VAL0 | APAD_XMT | REX_RTRY|REX_UFLO, mmio + CMD2);
|
|
writel((u32)JUMBO, mmio + CMD3);
|
|
}
|
|
|
|
#if AMD8111E_VLAN_TAG_USED
|
|
writel((u32) VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3);
|
|
#endif
|
|
writel( VAL0 | APAD_XMT | REX_RTRY, mmio + CMD2 );
|
|
|
|
/* Setting the MAC address to the device */
|
|
for(i = 0; i < ETH_ADDR_LEN; i++)
|
|
writeb( dev->dev_addr[i], mmio + PADR + i );
|
|
|
|
/* Enable interrupt coalesce */
|
|
if(lp->options & OPTION_INTR_COAL_ENABLE){
|
|
printk(KERN_INFO "%s: Interrupt Coalescing Enabled.\n",
|
|
dev->name);
|
|
amd8111e_set_coalesce(dev,ENABLE_COAL);
|
|
}
|
|
|
|
/* set RUN bit to start the chip */
|
|
writel(VAL2 | RDMD0, mmio + CMD0);
|
|
writel(VAL0 | INTREN | RUN, mmio + CMD0);
|
|
|
|
/* To avoid PCI posting bug */
|
|
readl(mmio+CMD0);
|
|
return 0;
|
|
}
|
|
/*
|
|
This function clears necessary the device registers.
|
|
*/
|
|
static void amd8111e_init_hw_default( struct amd8111e_priv* lp)
|
|
{
|
|
unsigned int reg_val;
|
|
unsigned int logic_filter[2] ={0,};
|
|
void __iomem *mmio = lp->mmio;
|
|
|
|
|
|
/* stop the chip */
|
|
writel(RUN, mmio + CMD0);
|
|
|
|
/* AUTOPOLL0 Register *//*TBD default value is 8100 in FPS */
|
|
writew( 0x8100 | lp->ext_phy_addr, mmio + AUTOPOLL0);
|
|
|
|
/* Clear RCV_RING_BASE_ADDR */
|
|
writel(0, mmio + RCV_RING_BASE_ADDR0);
|
|
|
|
/* Clear XMT_RING_BASE_ADDR */
|
|
writel(0, mmio + XMT_RING_BASE_ADDR0);
|
|
writel(0, mmio + XMT_RING_BASE_ADDR1);
|
|
writel(0, mmio + XMT_RING_BASE_ADDR2);
|
|
writel(0, mmio + XMT_RING_BASE_ADDR3);
|
|
|
|
/* Clear CMD0 */
|
|
writel(CMD0_CLEAR,mmio + CMD0);
|
|
|
|
/* Clear CMD2 */
|
|
writel(CMD2_CLEAR, mmio +CMD2);
|
|
|
|
/* Clear CMD7 */
|
|
writel(CMD7_CLEAR , mmio + CMD7);
|
|
|
|
/* Clear DLY_INT_A and DLY_INT_B */
|
|
writel(0x0, mmio + DLY_INT_A);
|
|
writel(0x0, mmio + DLY_INT_B);
|
|
|
|
/* Clear FLOW_CONTROL */
|
|
writel(0x0, mmio + FLOW_CONTROL);
|
|
|
|
/* Clear INT0 write 1 to clear register */
|
|
reg_val = readl(mmio + INT0);
|
|
writel(reg_val, mmio + INT0);
|
|
|
|
/* Clear STVAL */
|
|
writel(0x0, mmio + STVAL);
|
|
|
|
/* Clear INTEN0 */
|
|
writel( INTEN0_CLEAR, mmio + INTEN0);
|
|
|
|
/* Clear LADRF */
|
|
writel(0x0 , mmio + LADRF);
|
|
|
|
/* Set SRAM_SIZE & SRAM_BOUNDARY registers */
|
|
writel( 0x80010,mmio + SRAM_SIZE);
|
|
|
|
/* Clear RCV_RING0_LEN */
|
|
writel(0x0, mmio + RCV_RING_LEN0);
|
|
|
|
/* Clear XMT_RING0/1/2/3_LEN */
|
|
writel(0x0, mmio + XMT_RING_LEN0);
|
|
writel(0x0, mmio + XMT_RING_LEN1);
|
|
writel(0x0, mmio + XMT_RING_LEN2);
|
|
writel(0x0, mmio + XMT_RING_LEN3);
|
|
|
|
/* Clear XMT_RING_LIMIT */
|
|
writel(0x0, mmio + XMT_RING_LIMIT);
|
|
|
|
/* Clear MIB */
|
|
writew(MIB_CLEAR, mmio + MIB_ADDR);
|
|
|
|
/* Clear LARF */
|
|
amd8111e_writeq(*(u64*)logic_filter,mmio+LADRF);
|
|
|
|
/* SRAM_SIZE register */
|
|
reg_val = readl(mmio + SRAM_SIZE);
|
|
|
|
if(lp->options & OPTION_JUMBO_ENABLE)
|
|
writel( VAL2|JUMBO, mmio + CMD3);
|
|
#if AMD8111E_VLAN_TAG_USED
|
|
writel(VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3 );
|
|
#endif
|
|
/* Set default value to CTRL1 Register */
|
|
writel(CTRL1_DEFAULT, mmio + CTRL1);
|
|
|
|
/* To avoid PCI posting bug */
|
|
readl(mmio + CMD2);
|
|
|
|
}
|
|
|
|
/*
|
|
This function disables the interrupt and clears all the pending
|
|
interrupts in INT0
|
|
*/
|
|
static void amd8111e_disable_interrupt(struct amd8111e_priv* lp)
|
|
{
|
|
u32 intr0;
|
|
|
|
/* Disable interrupt */
|
|
writel(INTREN, lp->mmio + CMD0);
|
|
|
|
/* Clear INT0 */
|
|
intr0 = readl(lp->mmio + INT0);
|
|
writel(intr0, lp->mmio + INT0);
|
|
|
|
/* To avoid PCI posting bug */
|
|
readl(lp->mmio + INT0);
|
|
|
|
}
|
|
|
|
/*
|
|
This function stops the chip.
|
|
*/
|
|
static void amd8111e_stop_chip(struct amd8111e_priv* lp)
|
|
{
|
|
writel(RUN, lp->mmio + CMD0);
|
|
|
|
/* To avoid PCI posting bug */
|
|
readl(lp->mmio + CMD0);
|
|
}
|
|
|
|
/*
|
|
This function frees the transmiter and receiver descriptor rings.
|
|
*/
|
|
static void amd8111e_free_ring(struct amd8111e_priv* lp)
|
|
{
|
|
/* Free transmit and receive descriptor rings */
|
|
if(lp->rx_ring){
|
|
pci_free_consistent(lp->pci_dev,
|
|
sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,
|
|
lp->rx_ring, lp->rx_ring_dma_addr);
|
|
lp->rx_ring = NULL;
|
|
}
|
|
|
|
if(lp->tx_ring){
|
|
pci_free_consistent(lp->pci_dev,
|
|
sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,
|
|
lp->tx_ring, lp->tx_ring_dma_addr);
|
|
|
|
lp->tx_ring = NULL;
|
|
}
|
|
|
|
}
|
|
#if AMD8111E_VLAN_TAG_USED
|
|
/*
|
|
This is the receive indication function for packets with vlan tag.
|
|
*/
|
|
static int amd8111e_vlan_rx(struct amd8111e_priv *lp, struct sk_buff *skb, u16 vlan_tag)
|
|
{
|
|
return vlan_hwaccel_receive_skb(skb, lp->vlgrp,vlan_tag);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
This function will free all the transmit skbs that are actually transmitted by the device. It will check the ownership of the skb before freeing the skb.
|
|
*/
|
|
static int amd8111e_tx(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv* lp = netdev_priv(dev);
|
|
int tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK;
|
|
int status;
|
|
/* Complete all the transmit packet */
|
|
while (lp->tx_complete_idx != lp->tx_idx){
|
|
tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK;
|
|
status = le16_to_cpu(lp->tx_ring[tx_index].tx_flags);
|
|
|
|
if(status & OWN_BIT)
|
|
break; /* It still hasn't been Txed */
|
|
|
|
lp->tx_ring[tx_index].buff_phy_addr = 0;
|
|
|
|
/* We must free the original skb */
|
|
if (lp->tx_skbuff[tx_index]) {
|
|
pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[tx_index],
|
|
lp->tx_skbuff[tx_index]->len,
|
|
PCI_DMA_TODEVICE);
|
|
dev_kfree_skb_irq (lp->tx_skbuff[tx_index]);
|
|
lp->tx_skbuff[tx_index] = NULL;
|
|
lp->tx_dma_addr[tx_index] = 0;
|
|
}
|
|
lp->tx_complete_idx++;
|
|
/*COAL update tx coalescing parameters */
|
|
lp->coal_conf.tx_packets++;
|
|
lp->coal_conf.tx_bytes +=
|
|
le16_to_cpu(lp->tx_ring[tx_index].buff_count);
|
|
|
|
if (netif_queue_stopped(dev) &&
|
|
lp->tx_complete_idx > lp->tx_idx - NUM_TX_BUFFERS +2){
|
|
/* The ring is no longer full, clear tbusy. */
|
|
/* lp->tx_full = 0; */
|
|
netif_wake_queue (dev);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* This function handles the driver receive operation in polling mode */
|
|
static int amd8111e_rx_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct amd8111e_priv *lp = container_of(napi, struct amd8111e_priv, napi);
|
|
struct net_device *dev = lp->amd8111e_net_dev;
|
|
int rx_index = lp->rx_idx & RX_RING_DR_MOD_MASK;
|
|
void __iomem *mmio = lp->mmio;
|
|
struct sk_buff *skb,*new_skb;
|
|
int min_pkt_len, status;
|
|
unsigned int intr0;
|
|
int num_rx_pkt = 0;
|
|
short pkt_len;
|
|
#if AMD8111E_VLAN_TAG_USED
|
|
short vtag;
|
|
#endif
|
|
int rx_pkt_limit = budget;
|
|
unsigned long flags;
|
|
|
|
do{
|
|
/* process receive packets until we use the quota*/
|
|
/* If we own the next entry, it's a new packet. Send it up. */
|
|
while(1) {
|
|
status = le16_to_cpu(lp->rx_ring[rx_index].rx_flags);
|
|
if (status & OWN_BIT)
|
|
break;
|
|
|
|
/*
|
|
* There is a tricky error noted by John Murphy,
|
|
* <murf@perftech.com> to Russ Nelson: Even with
|
|
* full-sized * buffers it's possible for a
|
|
* jabber packet to use two buffers, with only
|
|
* the last correctly noting the error.
|
|
*/
|
|
|
|
if(status & ERR_BIT) {
|
|
/* reseting flags */
|
|
lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
|
|
goto err_next_pkt;
|
|
}
|
|
/* check for STP and ENP */
|
|
if(!((status & STP_BIT) && (status & ENP_BIT))){
|
|
/* reseting flags */
|
|
lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
|
|
goto err_next_pkt;
|
|
}
|
|
pkt_len = le16_to_cpu(lp->rx_ring[rx_index].msg_count) - 4;
|
|
|
|
#if AMD8111E_VLAN_TAG_USED
|
|
vtag = status & TT_MASK;
|
|
/*MAC will strip vlan tag*/
|
|
if(lp->vlgrp != NULL && vtag !=0)
|
|
min_pkt_len =MIN_PKT_LEN - 4;
|
|
else
|
|
#endif
|
|
min_pkt_len =MIN_PKT_LEN;
|
|
|
|
if (pkt_len < min_pkt_len) {
|
|
lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
|
|
lp->drv_rx_errors++;
|
|
goto err_next_pkt;
|
|
}
|
|
if(--rx_pkt_limit < 0)
|
|
goto rx_not_empty;
|
|
if(!(new_skb = dev_alloc_skb(lp->rx_buff_len))){
|
|
/* if allocation fail,
|
|
ignore that pkt and go to next one */
|
|
lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
|
|
lp->drv_rx_errors++;
|
|
goto err_next_pkt;
|
|
}
|
|
|
|
skb_reserve(new_skb, 2);
|
|
skb = lp->rx_skbuff[rx_index];
|
|
pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[rx_index],
|
|
lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
|
|
skb_put(skb, pkt_len);
|
|
lp->rx_skbuff[rx_index] = new_skb;
|
|
lp->rx_dma_addr[rx_index] = pci_map_single(lp->pci_dev,
|
|
new_skb->data,
|
|
lp->rx_buff_len-2,
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
|
|
#if AMD8111E_VLAN_TAG_USED
|
|
if(lp->vlgrp != NULL && (vtag == TT_VLAN_TAGGED)){
|
|
amd8111e_vlan_rx(lp, skb,
|
|
le16_to_cpu(lp->rx_ring[rx_index].tag_ctrl_info));
|
|
} else
|
|
#endif
|
|
netif_receive_skb(skb);
|
|
/*COAL update rx coalescing parameters*/
|
|
lp->coal_conf.rx_packets++;
|
|
lp->coal_conf.rx_bytes += pkt_len;
|
|
num_rx_pkt++;
|
|
|
|
err_next_pkt:
|
|
lp->rx_ring[rx_index].buff_phy_addr
|
|
= cpu_to_le32(lp->rx_dma_addr[rx_index]);
|
|
lp->rx_ring[rx_index].buff_count =
|
|
cpu_to_le16(lp->rx_buff_len-2);
|
|
wmb();
|
|
lp->rx_ring[rx_index].rx_flags |= cpu_to_le16(OWN_BIT);
|
|
rx_index = (++lp->rx_idx) & RX_RING_DR_MOD_MASK;
|
|
}
|
|
/* Check the interrupt status register for more packets in the
|
|
mean time. Process them since we have not used up our quota.*/
|
|
|
|
intr0 = readl(mmio + INT0);
|
|
/*Ack receive packets */
|
|
writel(intr0 & RINT0,mmio + INT0);
|
|
|
|
} while(intr0 & RINT0);
|
|
|
|
if (rx_pkt_limit > 0) {
|
|
/* Receive descriptor is empty now */
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
__napi_complete(napi);
|
|
writel(VAL0|RINTEN0, mmio + INTEN0);
|
|
writel(VAL2 | RDMD0, mmio + CMD0);
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
}
|
|
|
|
rx_not_empty:
|
|
return num_rx_pkt;
|
|
}
|
|
|
|
/*
|
|
This function will indicate the link status to the kernel.
|
|
*/
|
|
static int amd8111e_link_change(struct net_device* dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
int status0,speed;
|
|
|
|
/* read the link change */
|
|
status0 = readl(lp->mmio + STAT0);
|
|
|
|
if(status0 & LINK_STATS){
|
|
if(status0 & AUTONEG_COMPLETE)
|
|
lp->link_config.autoneg = AUTONEG_ENABLE;
|
|
else
|
|
lp->link_config.autoneg = AUTONEG_DISABLE;
|
|
|
|
if(status0 & FULL_DPLX)
|
|
lp->link_config.duplex = DUPLEX_FULL;
|
|
else
|
|
lp->link_config.duplex = DUPLEX_HALF;
|
|
speed = (status0 & SPEED_MASK) >> 7;
|
|
if(speed == PHY_SPEED_10)
|
|
lp->link_config.speed = SPEED_10;
|
|
else if(speed == PHY_SPEED_100)
|
|
lp->link_config.speed = SPEED_100;
|
|
|
|
printk(KERN_INFO "%s: Link is Up. Speed is %s Mbps %s Duplex\n", dev->name,
|
|
(lp->link_config.speed == SPEED_100) ? "100": "10",
|
|
(lp->link_config.duplex == DUPLEX_FULL)? "Full": "Half");
|
|
netif_carrier_on(dev);
|
|
}
|
|
else{
|
|
lp->link_config.speed = SPEED_INVALID;
|
|
lp->link_config.duplex = DUPLEX_INVALID;
|
|
lp->link_config.autoneg = AUTONEG_INVALID;
|
|
printk(KERN_INFO "%s: Link is Down.\n",dev->name);
|
|
netif_carrier_off(dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
/*
|
|
This function reads the mib counters.
|
|
*/
|
|
static int amd8111e_read_mib(void __iomem *mmio, u8 MIB_COUNTER)
|
|
{
|
|
unsigned int status;
|
|
unsigned int data;
|
|
unsigned int repeat = REPEAT_CNT;
|
|
|
|
writew( MIB_RD_CMD | MIB_COUNTER, mmio + MIB_ADDR);
|
|
do {
|
|
status = readw(mmio + MIB_ADDR);
|
|
udelay(2); /* controller takes MAX 2 us to get mib data */
|
|
}
|
|
while (--repeat && (status & MIB_CMD_ACTIVE));
|
|
|
|
data = readl(mmio + MIB_DATA);
|
|
return data;
|
|
}
|
|
|
|
/*
|
|
This function reads the mib registers and returns the hardware statistics. It updates previous internal driver statistics with new values.
|
|
*/
|
|
static struct net_device_stats *amd8111e_get_stats(struct net_device * dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
void __iomem *mmio = lp->mmio;
|
|
unsigned long flags;
|
|
/* struct net_device_stats *prev_stats = &lp->prev_stats; */
|
|
struct net_device_stats* new_stats = &lp->stats;
|
|
|
|
if(!lp->opened)
|
|
return &lp->stats;
|
|
spin_lock_irqsave (&lp->lock, flags);
|
|
|
|
/* stats.rx_packets */
|
|
new_stats->rx_packets = amd8111e_read_mib(mmio, rcv_broadcast_pkts)+
|
|
amd8111e_read_mib(mmio, rcv_multicast_pkts)+
|
|
amd8111e_read_mib(mmio, rcv_unicast_pkts);
|
|
|
|
/* stats.tx_packets */
|
|
new_stats->tx_packets = amd8111e_read_mib(mmio, xmt_packets);
|
|
|
|
/*stats.rx_bytes */
|
|
new_stats->rx_bytes = amd8111e_read_mib(mmio, rcv_octets);
|
|
|
|
/* stats.tx_bytes */
|
|
new_stats->tx_bytes = amd8111e_read_mib(mmio, xmt_octets);
|
|
|
|
/* stats.rx_errors */
|
|
/* hw errors + errors driver reported */
|
|
new_stats->rx_errors = amd8111e_read_mib(mmio, rcv_undersize_pkts)+
|
|
amd8111e_read_mib(mmio, rcv_fragments)+
|
|
amd8111e_read_mib(mmio, rcv_jabbers)+
|
|
amd8111e_read_mib(mmio, rcv_alignment_errors)+
|
|
amd8111e_read_mib(mmio, rcv_fcs_errors)+
|
|
amd8111e_read_mib(mmio, rcv_miss_pkts)+
|
|
lp->drv_rx_errors;
|
|
|
|
/* stats.tx_errors */
|
|
new_stats->tx_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
|
|
|
|
/* stats.rx_dropped*/
|
|
new_stats->rx_dropped = amd8111e_read_mib(mmio, rcv_miss_pkts);
|
|
|
|
/* stats.tx_dropped*/
|
|
new_stats->tx_dropped = amd8111e_read_mib(mmio, xmt_underrun_pkts);
|
|
|
|
/* stats.multicast*/
|
|
new_stats->multicast = amd8111e_read_mib(mmio, rcv_multicast_pkts);
|
|
|
|
/* stats.collisions*/
|
|
new_stats->collisions = amd8111e_read_mib(mmio, xmt_collisions);
|
|
|
|
/* stats.rx_length_errors*/
|
|
new_stats->rx_length_errors =
|
|
amd8111e_read_mib(mmio, rcv_undersize_pkts)+
|
|
amd8111e_read_mib(mmio, rcv_oversize_pkts);
|
|
|
|
/* stats.rx_over_errors*/
|
|
new_stats->rx_over_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
|
|
|
|
/* stats.rx_crc_errors*/
|
|
new_stats->rx_crc_errors = amd8111e_read_mib(mmio, rcv_fcs_errors);
|
|
|
|
/* stats.rx_frame_errors*/
|
|
new_stats->rx_frame_errors =
|
|
amd8111e_read_mib(mmio, rcv_alignment_errors);
|
|
|
|
/* stats.rx_fifo_errors */
|
|
new_stats->rx_fifo_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
|
|
|
|
/* stats.rx_missed_errors */
|
|
new_stats->rx_missed_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
|
|
|
|
/* stats.tx_aborted_errors*/
|
|
new_stats->tx_aborted_errors =
|
|
amd8111e_read_mib(mmio, xmt_excessive_collision);
|
|
|
|
/* stats.tx_carrier_errors*/
|
|
new_stats->tx_carrier_errors =
|
|
amd8111e_read_mib(mmio, xmt_loss_carrier);
|
|
|
|
/* stats.tx_fifo_errors*/
|
|
new_stats->tx_fifo_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
|
|
|
|
/* stats.tx_window_errors*/
|
|
new_stats->tx_window_errors =
|
|
amd8111e_read_mib(mmio, xmt_late_collision);
|
|
|
|
/* Reset the mibs for collecting new statistics */
|
|
/* writew(MIB_CLEAR, mmio + MIB_ADDR);*/
|
|
|
|
spin_unlock_irqrestore (&lp->lock, flags);
|
|
|
|
return new_stats;
|
|
}
|
|
/* This function recalculate the interrupt coalescing mode on every interrupt
|
|
according to the datarate and the packet rate.
|
|
*/
|
|
static int amd8111e_calc_coalesce(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
struct amd8111e_coalesce_conf * coal_conf = &lp->coal_conf;
|
|
int tx_pkt_rate;
|
|
int rx_pkt_rate;
|
|
int tx_data_rate;
|
|
int rx_data_rate;
|
|
int rx_pkt_size;
|
|
int tx_pkt_size;
|
|
|
|
tx_pkt_rate = coal_conf->tx_packets - coal_conf->tx_prev_packets;
|
|
coal_conf->tx_prev_packets = coal_conf->tx_packets;
|
|
|
|
tx_data_rate = coal_conf->tx_bytes - coal_conf->tx_prev_bytes;
|
|
coal_conf->tx_prev_bytes = coal_conf->tx_bytes;
|
|
|
|
rx_pkt_rate = coal_conf->rx_packets - coal_conf->rx_prev_packets;
|
|
coal_conf->rx_prev_packets = coal_conf->rx_packets;
|
|
|
|
rx_data_rate = coal_conf->rx_bytes - coal_conf->rx_prev_bytes;
|
|
coal_conf->rx_prev_bytes = coal_conf->rx_bytes;
|
|
|
|
if(rx_pkt_rate < 800){
|
|
if(coal_conf->rx_coal_type != NO_COALESCE){
|
|
|
|
coal_conf->rx_timeout = 0x0;
|
|
coal_conf->rx_event_count = 0;
|
|
amd8111e_set_coalesce(dev,RX_INTR_COAL);
|
|
coal_conf->rx_coal_type = NO_COALESCE;
|
|
}
|
|
}
|
|
else{
|
|
|
|
rx_pkt_size = rx_data_rate/rx_pkt_rate;
|
|
if (rx_pkt_size < 128){
|
|
if(coal_conf->rx_coal_type != NO_COALESCE){
|
|
|
|
coal_conf->rx_timeout = 0;
|
|
coal_conf->rx_event_count = 0;
|
|
amd8111e_set_coalesce(dev,RX_INTR_COAL);
|
|
coal_conf->rx_coal_type = NO_COALESCE;
|
|
}
|
|
|
|
}
|
|
else if ( (rx_pkt_size >= 128) && (rx_pkt_size < 512) ){
|
|
|
|
if(coal_conf->rx_coal_type != LOW_COALESCE){
|
|
coal_conf->rx_timeout = 1;
|
|
coal_conf->rx_event_count = 4;
|
|
amd8111e_set_coalesce(dev,RX_INTR_COAL);
|
|
coal_conf->rx_coal_type = LOW_COALESCE;
|
|
}
|
|
}
|
|
else if ((rx_pkt_size >= 512) && (rx_pkt_size < 1024)){
|
|
|
|
if(coal_conf->rx_coal_type != MEDIUM_COALESCE){
|
|
coal_conf->rx_timeout = 1;
|
|
coal_conf->rx_event_count = 4;
|
|
amd8111e_set_coalesce(dev,RX_INTR_COAL);
|
|
coal_conf->rx_coal_type = MEDIUM_COALESCE;
|
|
}
|
|
|
|
}
|
|
else if(rx_pkt_size >= 1024){
|
|
if(coal_conf->rx_coal_type != HIGH_COALESCE){
|
|
coal_conf->rx_timeout = 2;
|
|
coal_conf->rx_event_count = 3;
|
|
amd8111e_set_coalesce(dev,RX_INTR_COAL);
|
|
coal_conf->rx_coal_type = HIGH_COALESCE;
|
|
}
|
|
}
|
|
}
|
|
/* NOW FOR TX INTR COALESC */
|
|
if(tx_pkt_rate < 800){
|
|
if(coal_conf->tx_coal_type != NO_COALESCE){
|
|
|
|
coal_conf->tx_timeout = 0x0;
|
|
coal_conf->tx_event_count = 0;
|
|
amd8111e_set_coalesce(dev,TX_INTR_COAL);
|
|
coal_conf->tx_coal_type = NO_COALESCE;
|
|
}
|
|
}
|
|
else{
|
|
|
|
tx_pkt_size = tx_data_rate/tx_pkt_rate;
|
|
if (tx_pkt_size < 128){
|
|
|
|
if(coal_conf->tx_coal_type != NO_COALESCE){
|
|
|
|
coal_conf->tx_timeout = 0;
|
|
coal_conf->tx_event_count = 0;
|
|
amd8111e_set_coalesce(dev,TX_INTR_COAL);
|
|
coal_conf->tx_coal_type = NO_COALESCE;
|
|
}
|
|
|
|
}
|
|
else if ( (tx_pkt_size >= 128) && (tx_pkt_size < 512) ){
|
|
|
|
if(coal_conf->tx_coal_type != LOW_COALESCE){
|
|
coal_conf->tx_timeout = 1;
|
|
coal_conf->tx_event_count = 2;
|
|
amd8111e_set_coalesce(dev,TX_INTR_COAL);
|
|
coal_conf->tx_coal_type = LOW_COALESCE;
|
|
|
|
}
|
|
}
|
|
else if ((tx_pkt_size >= 512) && (tx_pkt_size < 1024)){
|
|
|
|
if(coal_conf->tx_coal_type != MEDIUM_COALESCE){
|
|
coal_conf->tx_timeout = 2;
|
|
coal_conf->tx_event_count = 5;
|
|
amd8111e_set_coalesce(dev,TX_INTR_COAL);
|
|
coal_conf->tx_coal_type = MEDIUM_COALESCE;
|
|
}
|
|
|
|
}
|
|
else if(tx_pkt_size >= 1024){
|
|
if (tx_pkt_size >= 1024){
|
|
if(coal_conf->tx_coal_type != HIGH_COALESCE){
|
|
coal_conf->tx_timeout = 4;
|
|
coal_conf->tx_event_count = 8;
|
|
amd8111e_set_coalesce(dev,TX_INTR_COAL);
|
|
coal_conf->tx_coal_type = HIGH_COALESCE;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
}
|
|
/*
|
|
This is device interrupt function. It handles transmit, receive,link change and hardware timer interrupts.
|
|
*/
|
|
static irqreturn_t amd8111e_interrupt(int irq, void *dev_id)
|
|
{
|
|
|
|
struct net_device * dev = (struct net_device *) dev_id;
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
void __iomem *mmio = lp->mmio;
|
|
unsigned int intr0, intren0;
|
|
unsigned int handled = 1;
|
|
|
|
if(unlikely(dev == NULL))
|
|
return IRQ_NONE;
|
|
|
|
spin_lock(&lp->lock);
|
|
|
|
/* disabling interrupt */
|
|
writel(INTREN, mmio + CMD0);
|
|
|
|
/* Read interrupt status */
|
|
intr0 = readl(mmio + INT0);
|
|
intren0 = readl(mmio + INTEN0);
|
|
|
|
/* Process all the INT event until INTR bit is clear. */
|
|
|
|
if (!(intr0 & INTR)){
|
|
handled = 0;
|
|
goto err_no_interrupt;
|
|
}
|
|
|
|
/* Current driver processes 4 interrupts : RINT,TINT,LCINT,STINT */
|
|
writel(intr0, mmio + INT0);
|
|
|
|
/* Check if Receive Interrupt has occurred. */
|
|
if (intr0 & RINT0) {
|
|
if (napi_schedule_prep(&lp->napi)) {
|
|
/* Disable receive interupts */
|
|
writel(RINTEN0, mmio + INTEN0);
|
|
/* Schedule a polling routine */
|
|
__napi_schedule(&lp->napi);
|
|
} else if (intren0 & RINTEN0) {
|
|
printk("************Driver bug! \
|
|
interrupt while in poll\n");
|
|
/* Fix by disable receive interrupts */
|
|
writel(RINTEN0, mmio + INTEN0);
|
|
}
|
|
}
|
|
|
|
/* Check if Transmit Interrupt has occurred. */
|
|
if (intr0 & TINT0)
|
|
amd8111e_tx(dev);
|
|
|
|
/* Check if Link Change Interrupt has occurred. */
|
|
if (intr0 & LCINT)
|
|
amd8111e_link_change(dev);
|
|
|
|
/* Check if Hardware Timer Interrupt has occurred. */
|
|
if (intr0 & STINT)
|
|
amd8111e_calc_coalesce(dev);
|
|
|
|
err_no_interrupt:
|
|
writel( VAL0 | INTREN,mmio + CMD0);
|
|
|
|
spin_unlock(&lp->lock);
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void amd8111e_poll(struct net_device *dev)
|
|
{
|
|
unsigned long flags;
|
|
local_irq_save(flags);
|
|
amd8111e_interrupt(0, dev);
|
|
local_irq_restore(flags);
|
|
}
|
|
#endif
|
|
|
|
|
|
/*
|
|
This function closes the network interface and updates the statistics so that most recent statistics will be available after the interface is down.
|
|
*/
|
|
static int amd8111e_close(struct net_device * dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
netif_stop_queue(dev);
|
|
|
|
napi_disable(&lp->napi);
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
|
|
amd8111e_disable_interrupt(lp);
|
|
amd8111e_stop_chip(lp);
|
|
|
|
/* Free transmit and receive skbs */
|
|
amd8111e_free_skbs(lp->amd8111e_net_dev);
|
|
|
|
netif_carrier_off(lp->amd8111e_net_dev);
|
|
|
|
/* Delete ipg timer */
|
|
if(lp->options & OPTION_DYN_IPG_ENABLE)
|
|
del_timer_sync(&lp->ipg_data.ipg_timer);
|
|
|
|
spin_unlock_irq(&lp->lock);
|
|
free_irq(dev->irq, dev);
|
|
amd8111e_free_ring(lp);
|
|
|
|
/* Update the statistics before closing */
|
|
amd8111e_get_stats(dev);
|
|
lp->opened = 0;
|
|
return 0;
|
|
}
|
|
/* This function opens new interface.It requests irq for the device, initializes the device,buffers and descriptors, and starts the device.
|
|
*/
|
|
static int amd8111e_open(struct net_device * dev )
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
|
|
if(dev->irq ==0 || request_irq(dev->irq, amd8111e_interrupt, IRQF_SHARED,
|
|
dev->name, dev))
|
|
return -EAGAIN;
|
|
|
|
napi_enable(&lp->napi);
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
|
|
amd8111e_init_hw_default(lp);
|
|
|
|
if(amd8111e_restart(dev)){
|
|
spin_unlock_irq(&lp->lock);
|
|
napi_disable(&lp->napi);
|
|
if (dev->irq)
|
|
free_irq(dev->irq, dev);
|
|
return -ENOMEM;
|
|
}
|
|
/* Start ipg timer */
|
|
if(lp->options & OPTION_DYN_IPG_ENABLE){
|
|
add_timer(&lp->ipg_data.ipg_timer);
|
|
printk(KERN_INFO "%s: Dynamic IPG Enabled.\n",dev->name);
|
|
}
|
|
|
|
lp->opened = 1;
|
|
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
netif_start_queue(dev);
|
|
|
|
return 0;
|
|
}
|
|
/*
|
|
This function checks if there is any transmit descriptors available to queue more packet.
|
|
*/
|
|
static int amd8111e_tx_queue_avail(struct amd8111e_priv* lp )
|
|
{
|
|
int tx_index = lp->tx_idx & TX_BUFF_MOD_MASK;
|
|
if (lp->tx_skbuff[tx_index])
|
|
return -1;
|
|
else
|
|
return 0;
|
|
|
|
}
|
|
/*
|
|
This function will queue the transmit packets to the descriptors and will trigger the send operation. It also initializes the transmit descriptors with buffer physical address, byte count, ownership to hardware etc.
|
|
*/
|
|
|
|
static int amd8111e_start_xmit(struct sk_buff *skb, struct net_device * dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
int tx_index;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
|
|
tx_index = lp->tx_idx & TX_RING_DR_MOD_MASK;
|
|
|
|
lp->tx_ring[tx_index].buff_count = cpu_to_le16(skb->len);
|
|
|
|
lp->tx_skbuff[tx_index] = skb;
|
|
lp->tx_ring[tx_index].tx_flags = 0;
|
|
|
|
#if AMD8111E_VLAN_TAG_USED
|
|
if((lp->vlgrp != NULL) && vlan_tx_tag_present(skb)){
|
|
lp->tx_ring[tx_index].tag_ctrl_cmd |=
|
|
cpu_to_le16(TCC_VLAN_INSERT);
|
|
lp->tx_ring[tx_index].tag_ctrl_info =
|
|
cpu_to_le16(vlan_tx_tag_get(skb));
|
|
|
|
}
|
|
#endif
|
|
lp->tx_dma_addr[tx_index] =
|
|
pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE);
|
|
lp->tx_ring[tx_index].buff_phy_addr =
|
|
cpu_to_le32(lp->tx_dma_addr[tx_index]);
|
|
|
|
/* Set FCS and LTINT bits */
|
|
wmb();
|
|
lp->tx_ring[tx_index].tx_flags |=
|
|
cpu_to_le16(OWN_BIT | STP_BIT | ENP_BIT|ADD_FCS_BIT|LTINT_BIT);
|
|
|
|
lp->tx_idx++;
|
|
|
|
/* Trigger an immediate send poll. */
|
|
writel( VAL1 | TDMD0, lp->mmio + CMD0);
|
|
writel( VAL2 | RDMD0,lp->mmio + CMD0);
|
|
|
|
dev->trans_start = jiffies;
|
|
|
|
if(amd8111e_tx_queue_avail(lp) < 0){
|
|
netif_stop_queue(dev);
|
|
}
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
return 0;
|
|
}
|
|
/*
|
|
This function returns all the memory mapped registers of the device.
|
|
*/
|
|
static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf)
|
|
{
|
|
void __iomem *mmio = lp->mmio;
|
|
/* Read only necessary registers */
|
|
buf[0] = readl(mmio + XMT_RING_BASE_ADDR0);
|
|
buf[1] = readl(mmio + XMT_RING_LEN0);
|
|
buf[2] = readl(mmio + RCV_RING_BASE_ADDR0);
|
|
buf[3] = readl(mmio + RCV_RING_LEN0);
|
|
buf[4] = readl(mmio + CMD0);
|
|
buf[5] = readl(mmio + CMD2);
|
|
buf[6] = readl(mmio + CMD3);
|
|
buf[7] = readl(mmio + CMD7);
|
|
buf[8] = readl(mmio + INT0);
|
|
buf[9] = readl(mmio + INTEN0);
|
|
buf[10] = readl(mmio + LADRF);
|
|
buf[11] = readl(mmio + LADRF+4);
|
|
buf[12] = readl(mmio + STAT0);
|
|
}
|
|
|
|
|
|
/*
|
|
This function sets promiscuos mode, all-multi mode or the multicast address
|
|
list to the device.
|
|
*/
|
|
static void amd8111e_set_multicast_list(struct net_device *dev)
|
|
{
|
|
struct dev_mc_list* mc_ptr;
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
u32 mc_filter[2] ;
|
|
int i,bit_num;
|
|
if(dev->flags & IFF_PROMISC){
|
|
writel( VAL2 | PROM, lp->mmio + CMD2);
|
|
return;
|
|
}
|
|
else
|
|
writel( PROM, lp->mmio + CMD2);
|
|
if(dev->flags & IFF_ALLMULTI || dev->mc_count > MAX_FILTER_SIZE){
|
|
/* get all multicast packet */
|
|
mc_filter[1] = mc_filter[0] = 0xffffffff;
|
|
lp->mc_list = dev->mc_list;
|
|
lp->options |= OPTION_MULTICAST_ENABLE;
|
|
amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
|
|
return;
|
|
}
|
|
if( dev->mc_count == 0 ){
|
|
/* get only own packets */
|
|
mc_filter[1] = mc_filter[0] = 0;
|
|
lp->mc_list = NULL;
|
|
lp->options &= ~OPTION_MULTICAST_ENABLE;
|
|
amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
|
|
/* disable promiscous mode */
|
|
writel(PROM, lp->mmio + CMD2);
|
|
return;
|
|
}
|
|
/* load all the multicast addresses in the logic filter */
|
|
lp->options |= OPTION_MULTICAST_ENABLE;
|
|
lp->mc_list = dev->mc_list;
|
|
mc_filter[1] = mc_filter[0] = 0;
|
|
for (i = 0, mc_ptr = dev->mc_list; mc_ptr && i < dev->mc_count;
|
|
i++, mc_ptr = mc_ptr->next) {
|
|
bit_num = (ether_crc_le(ETH_ALEN, mc_ptr->dmi_addr) >> 26) & 0x3f;
|
|
mc_filter[bit_num >> 5] |= 1 << (bit_num & 31);
|
|
}
|
|
amd8111e_writeq(*(u64*)mc_filter,lp->mmio+ LADRF);
|
|
|
|
/* To eliminate PCI posting bug */
|
|
readl(lp->mmio + CMD2);
|
|
|
|
}
|
|
|
|
static void amd8111e_get_drvinfo(struct net_device* dev, struct ethtool_drvinfo *info)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
struct pci_dev *pci_dev = lp->pci_dev;
|
|
strcpy (info->driver, MODULE_NAME);
|
|
strcpy (info->version, MODULE_VERS);
|
|
sprintf(info->fw_version,"%u",chip_version);
|
|
strcpy (info->bus_info, pci_name(pci_dev));
|
|
}
|
|
|
|
static int amd8111e_get_regs_len(struct net_device *dev)
|
|
{
|
|
return AMD8111E_REG_DUMP_LEN;
|
|
}
|
|
|
|
static void amd8111e_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
regs->version = 0;
|
|
amd8111e_read_regs(lp, buf);
|
|
}
|
|
|
|
static int amd8111e_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
spin_lock_irq(&lp->lock);
|
|
mii_ethtool_gset(&lp->mii_if, ecmd);
|
|
spin_unlock_irq(&lp->lock);
|
|
return 0;
|
|
}
|
|
|
|
static int amd8111e_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
int res;
|
|
spin_lock_irq(&lp->lock);
|
|
res = mii_ethtool_sset(&lp->mii_if, ecmd);
|
|
spin_unlock_irq(&lp->lock);
|
|
return res;
|
|
}
|
|
|
|
static int amd8111e_nway_reset(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
return mii_nway_restart(&lp->mii_if);
|
|
}
|
|
|
|
static u32 amd8111e_get_link(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
return mii_link_ok(&lp->mii_if);
|
|
}
|
|
|
|
static void amd8111e_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
wol_info->supported = WAKE_MAGIC|WAKE_PHY;
|
|
if (lp->options & OPTION_WOL_ENABLE)
|
|
wol_info->wolopts = WAKE_MAGIC;
|
|
}
|
|
|
|
static int amd8111e_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
if (wol_info->wolopts & ~(WAKE_MAGIC|WAKE_PHY))
|
|
return -EINVAL;
|
|
spin_lock_irq(&lp->lock);
|
|
if (wol_info->wolopts & WAKE_MAGIC)
|
|
lp->options |=
|
|
(OPTION_WOL_ENABLE | OPTION_WAKE_MAGIC_ENABLE);
|
|
else if(wol_info->wolopts & WAKE_PHY)
|
|
lp->options |=
|
|
(OPTION_WOL_ENABLE | OPTION_WAKE_PHY_ENABLE);
|
|
else
|
|
lp->options &= ~OPTION_WOL_ENABLE;
|
|
spin_unlock_irq(&lp->lock);
|
|
return 0;
|
|
}
|
|
|
|
static const struct ethtool_ops ops = {
|
|
.get_drvinfo = amd8111e_get_drvinfo,
|
|
.get_regs_len = amd8111e_get_regs_len,
|
|
.get_regs = amd8111e_get_regs,
|
|
.get_settings = amd8111e_get_settings,
|
|
.set_settings = amd8111e_set_settings,
|
|
.nway_reset = amd8111e_nway_reset,
|
|
.get_link = amd8111e_get_link,
|
|
.get_wol = amd8111e_get_wol,
|
|
.set_wol = amd8111e_set_wol,
|
|
};
|
|
|
|
/*
|
|
This function handles all the ethtool ioctls. It gives driver info, gets/sets driver speed, gets memory mapped register values, forces auto negotiation, sets/gets WOL options for ethtool application.
|
|
*/
|
|
|
|
static int amd8111e_ioctl(struct net_device * dev , struct ifreq *ifr, int cmd)
|
|
{
|
|
struct mii_ioctl_data *data = if_mii(ifr);
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
int err;
|
|
u32 mii_regval;
|
|
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
|
|
switch(cmd) {
|
|
case SIOCGMIIPHY:
|
|
data->phy_id = lp->ext_phy_addr;
|
|
|
|
/* fallthru */
|
|
case SIOCGMIIREG:
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
err = amd8111e_read_phy(lp, data->phy_id,
|
|
data->reg_num & PHY_REG_ADDR_MASK, &mii_regval);
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
data->val_out = mii_regval;
|
|
return err;
|
|
|
|
case SIOCSMIIREG:
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
err = amd8111e_write_phy(lp, data->phy_id,
|
|
data->reg_num & PHY_REG_ADDR_MASK, data->val_in);
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
return err;
|
|
|
|
default:
|
|
/* do nothing */
|
|
break;
|
|
}
|
|
return -EOPNOTSUPP;
|
|
}
|
|
static int amd8111e_set_mac_address(struct net_device *dev, void *p)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
int i;
|
|
struct sockaddr *addr = p;
|
|
|
|
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
|
|
spin_lock_irq(&lp->lock);
|
|
/* Setting the MAC address to the device */
|
|
for(i = 0; i < ETH_ADDR_LEN; i++)
|
|
writeb( dev->dev_addr[i], lp->mmio + PADR + i );
|
|
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
This function changes the mtu of the device. It restarts the device to initialize the descriptor with new receive buffers.
|
|
*/
|
|
static int amd8111e_change_mtu(struct net_device *dev, int new_mtu)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
int err;
|
|
|
|
if ((new_mtu < AMD8111E_MIN_MTU) || (new_mtu > AMD8111E_MAX_MTU))
|
|
return -EINVAL;
|
|
|
|
if (!netif_running(dev)) {
|
|
/* new_mtu will be used
|
|
when device starts netxt time */
|
|
dev->mtu = new_mtu;
|
|
return 0;
|
|
}
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
|
|
/* stop the chip */
|
|
writel(RUN, lp->mmio + CMD0);
|
|
|
|
dev->mtu = new_mtu;
|
|
|
|
err = amd8111e_restart(dev);
|
|
spin_unlock_irq(&lp->lock);
|
|
if(!err)
|
|
netif_start_queue(dev);
|
|
return err;
|
|
}
|
|
|
|
#if AMD8111E_VLAN_TAG_USED
|
|
static void amd8111e_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
spin_lock_irq(&lp->lock);
|
|
lp->vlgrp = grp;
|
|
spin_unlock_irq(&lp->lock);
|
|
}
|
|
#endif
|
|
|
|
static int amd8111e_enable_magicpkt(struct amd8111e_priv* lp)
|
|
{
|
|
writel( VAL1|MPPLBA, lp->mmio + CMD3);
|
|
writel( VAL0|MPEN_SW, lp->mmio + CMD7);
|
|
|
|
/* To eliminate PCI posting bug */
|
|
readl(lp->mmio + CMD7);
|
|
return 0;
|
|
}
|
|
|
|
static int amd8111e_enable_link_change(struct amd8111e_priv* lp)
|
|
{
|
|
|
|
/* Adapter is already stoped/suspended/interrupt-disabled */
|
|
writel(VAL0|LCMODE_SW,lp->mmio + CMD7);
|
|
|
|
/* To eliminate PCI posting bug */
|
|
readl(lp->mmio + CMD7);
|
|
return 0;
|
|
}
|
|
/* This function is called when a packet transmission fails to complete within a resonable period, on the assumption that an interrupts have been failed or the interface is locked up. This function will reinitialize the hardware */
|
|
|
|
static void amd8111e_tx_timeout(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv* lp = netdev_priv(dev);
|
|
int err;
|
|
|
|
printk(KERN_ERR "%s: transmit timed out, resetting\n",
|
|
dev->name);
|
|
spin_lock_irq(&lp->lock);
|
|
err = amd8111e_restart(dev);
|
|
spin_unlock_irq(&lp->lock);
|
|
if(!err)
|
|
netif_wake_queue(dev);
|
|
}
|
|
static int amd8111e_suspend(struct pci_dev *pci_dev, pm_message_t state)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pci_dev);
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
|
|
if (!netif_running(dev))
|
|
return 0;
|
|
|
|
/* disable the interrupt */
|
|
spin_lock_irq(&lp->lock);
|
|
amd8111e_disable_interrupt(lp);
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
netif_device_detach(dev);
|
|
|
|
/* stop chip */
|
|
spin_lock_irq(&lp->lock);
|
|
if(lp->options & OPTION_DYN_IPG_ENABLE)
|
|
del_timer_sync(&lp->ipg_data.ipg_timer);
|
|
amd8111e_stop_chip(lp);
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
if(lp->options & OPTION_WOL_ENABLE){
|
|
/* enable wol */
|
|
if(lp->options & OPTION_WAKE_MAGIC_ENABLE)
|
|
amd8111e_enable_magicpkt(lp);
|
|
if(lp->options & OPTION_WAKE_PHY_ENABLE)
|
|
amd8111e_enable_link_change(lp);
|
|
|
|
pci_enable_wake(pci_dev, PCI_D3hot, 1);
|
|
pci_enable_wake(pci_dev, PCI_D3cold, 1);
|
|
|
|
}
|
|
else{
|
|
pci_enable_wake(pci_dev, PCI_D3hot, 0);
|
|
pci_enable_wake(pci_dev, PCI_D3cold, 0);
|
|
}
|
|
|
|
pci_save_state(pci_dev);
|
|
pci_set_power_state(pci_dev, PCI_D3hot);
|
|
|
|
return 0;
|
|
}
|
|
static int amd8111e_resume(struct pci_dev *pci_dev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pci_dev);
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
|
|
if (!netif_running(dev))
|
|
return 0;
|
|
|
|
pci_set_power_state(pci_dev, PCI_D0);
|
|
pci_restore_state(pci_dev);
|
|
|
|
pci_enable_wake(pci_dev, PCI_D3hot, 0);
|
|
pci_enable_wake(pci_dev, PCI_D3cold, 0); /* D3 cold */
|
|
|
|
netif_device_attach(dev);
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
amd8111e_restart(dev);
|
|
/* Restart ipg timer */
|
|
if(lp->options & OPTION_DYN_IPG_ENABLE)
|
|
mod_timer(&lp->ipg_data.ipg_timer,
|
|
jiffies + IPG_CONVERGE_JIFFIES);
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void __devexit amd8111e_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
if (dev) {
|
|
unregister_netdev(dev);
|
|
iounmap(((struct amd8111e_priv *)netdev_priv(dev))->mmio);
|
|
free_netdev(dev);
|
|
pci_release_regions(pdev);
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
}
|
|
}
|
|
static void amd8111e_config_ipg(struct net_device* dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
struct ipg_info* ipg_data = &lp->ipg_data;
|
|
void __iomem *mmio = lp->mmio;
|
|
unsigned int prev_col_cnt = ipg_data->col_cnt;
|
|
unsigned int total_col_cnt;
|
|
unsigned int tmp_ipg;
|
|
|
|
if(lp->link_config.duplex == DUPLEX_FULL){
|
|
ipg_data->ipg = DEFAULT_IPG;
|
|
return;
|
|
}
|
|
|
|
if(ipg_data->ipg_state == SSTATE){
|
|
|
|
if(ipg_data->timer_tick == IPG_STABLE_TIME){
|
|
|
|
ipg_data->timer_tick = 0;
|
|
ipg_data->ipg = MIN_IPG - IPG_STEP;
|
|
ipg_data->current_ipg = MIN_IPG;
|
|
ipg_data->diff_col_cnt = 0xFFFFFFFF;
|
|
ipg_data->ipg_state = CSTATE;
|
|
}
|
|
else
|
|
ipg_data->timer_tick++;
|
|
}
|
|
|
|
if(ipg_data->ipg_state == CSTATE){
|
|
|
|
/* Get the current collision count */
|
|
|
|
total_col_cnt = ipg_data->col_cnt =
|
|
amd8111e_read_mib(mmio, xmt_collisions);
|
|
|
|
if ((total_col_cnt - prev_col_cnt) <
|
|
(ipg_data->diff_col_cnt)){
|
|
|
|
ipg_data->diff_col_cnt =
|
|
total_col_cnt - prev_col_cnt ;
|
|
|
|
ipg_data->ipg = ipg_data->current_ipg;
|
|
}
|
|
|
|
ipg_data->current_ipg += IPG_STEP;
|
|
|
|
if (ipg_data->current_ipg <= MAX_IPG)
|
|
tmp_ipg = ipg_data->current_ipg;
|
|
else{
|
|
tmp_ipg = ipg_data->ipg;
|
|
ipg_data->ipg_state = SSTATE;
|
|
}
|
|
writew((u32)tmp_ipg, mmio + IPG);
|
|
writew((u32)(tmp_ipg - IFS1_DELTA), mmio + IFS1);
|
|
}
|
|
mod_timer(&lp->ipg_data.ipg_timer, jiffies + IPG_CONVERGE_JIFFIES);
|
|
return;
|
|
|
|
}
|
|
|
|
static void __devinit amd8111e_probe_ext_phy(struct net_device* dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
int i;
|
|
|
|
for (i = 0x1e; i >= 0; i--) {
|
|
u32 id1, id2;
|
|
|
|
if (amd8111e_read_phy(lp, i, MII_PHYSID1, &id1))
|
|
continue;
|
|
if (amd8111e_read_phy(lp, i, MII_PHYSID2, &id2))
|
|
continue;
|
|
lp->ext_phy_id = (id1 << 16) | id2;
|
|
lp->ext_phy_addr = i;
|
|
return;
|
|
}
|
|
lp->ext_phy_id = 0;
|
|
lp->ext_phy_addr = 1;
|
|
}
|
|
|
|
static const struct net_device_ops amd8111e_netdev_ops = {
|
|
.ndo_open = amd8111e_open,
|
|
.ndo_stop = amd8111e_close,
|
|
.ndo_start_xmit = amd8111e_start_xmit,
|
|
.ndo_tx_timeout = amd8111e_tx_timeout,
|
|
.ndo_get_stats = amd8111e_get_stats,
|
|
.ndo_set_multicast_list = amd8111e_set_multicast_list,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_set_mac_address = amd8111e_set_mac_address,
|
|
.ndo_do_ioctl = amd8111e_ioctl,
|
|
.ndo_change_mtu = amd8111e_change_mtu,
|
|
#if AMD8111E_VLAN_TAG_USED
|
|
.ndo_vlan_rx_register = amd8111e_vlan_rx_register,
|
|
#endif
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = amd8111e_poll,
|
|
#endif
|
|
};
|
|
|
|
static int __devinit amd8111e_probe_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
int err,i,pm_cap;
|
|
unsigned long reg_addr,reg_len;
|
|
struct amd8111e_priv* lp;
|
|
struct net_device* dev;
|
|
|
|
err = pci_enable_device(pdev);
|
|
if(err){
|
|
printk(KERN_ERR "amd8111e: Cannot enable new PCI device, "
|
|
"exiting.\n");
|
|
return err;
|
|
}
|
|
|
|
if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)){
|
|
printk(KERN_ERR "amd8111e: Cannot find PCI base address, "
|
|
"exiting.\n");
|
|
err = -ENODEV;
|
|
goto err_disable_pdev;
|
|
}
|
|
|
|
err = pci_request_regions(pdev, MODULE_NAME);
|
|
if(err){
|
|
printk(KERN_ERR "amd8111e: Cannot obtain PCI resources, "
|
|
"exiting.\n");
|
|
goto err_disable_pdev;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
/* Find power-management capability. */
|
|
if((pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM))==0){
|
|
printk(KERN_ERR "amd8111e: No Power Management capability, "
|
|
"exiting.\n");
|
|
goto err_free_reg;
|
|
}
|
|
|
|
/* Initialize DMA */
|
|
if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) < 0) {
|
|
printk(KERN_ERR "amd8111e: DMA not supported,"
|
|
"exiting.\n");
|
|
goto err_free_reg;
|
|
}
|
|
|
|
reg_addr = pci_resource_start(pdev, 0);
|
|
reg_len = pci_resource_len(pdev, 0);
|
|
|
|
dev = alloc_etherdev(sizeof(struct amd8111e_priv));
|
|
if (!dev) {
|
|
printk(KERN_ERR "amd8111e: Etherdev alloc failed, exiting.\n");
|
|
err = -ENOMEM;
|
|
goto err_free_reg;
|
|
}
|
|
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
#if AMD8111E_VLAN_TAG_USED
|
|
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX ;
|
|
#endif
|
|
|
|
lp = netdev_priv(dev);
|
|
lp->pci_dev = pdev;
|
|
lp->amd8111e_net_dev = dev;
|
|
lp->pm_cap = pm_cap;
|
|
|
|
spin_lock_init(&lp->lock);
|
|
|
|
lp->mmio = ioremap(reg_addr, reg_len);
|
|
if (!lp->mmio) {
|
|
printk(KERN_ERR "amd8111e: Cannot map device registers, "
|
|
"exiting\n");
|
|
err = -ENOMEM;
|
|
goto err_free_dev;
|
|
}
|
|
|
|
/* Initializing MAC address */
|
|
for(i = 0; i < ETH_ADDR_LEN; i++)
|
|
dev->dev_addr[i] = readb(lp->mmio + PADR + i);
|
|
|
|
/* Setting user defined parametrs */
|
|
lp->ext_phy_option = speed_duplex[card_idx];
|
|
if(coalesce[card_idx])
|
|
lp->options |= OPTION_INTR_COAL_ENABLE;
|
|
if(dynamic_ipg[card_idx++])
|
|
lp->options |= OPTION_DYN_IPG_ENABLE;
|
|
|
|
|
|
/* Initialize driver entry points */
|
|
dev->netdev_ops = &amd8111e_netdev_ops;
|
|
SET_ETHTOOL_OPS(dev, &ops);
|
|
dev->irq =pdev->irq;
|
|
dev->watchdog_timeo = AMD8111E_TX_TIMEOUT;
|
|
netif_napi_add(dev, &lp->napi, amd8111e_rx_poll, 32);
|
|
|
|
#if AMD8111E_VLAN_TAG_USED
|
|
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
|
|
#endif
|
|
/* Probe the external PHY */
|
|
amd8111e_probe_ext_phy(dev);
|
|
|
|
/* setting mii default values */
|
|
lp->mii_if.dev = dev;
|
|
lp->mii_if.mdio_read = amd8111e_mdio_read;
|
|
lp->mii_if.mdio_write = amd8111e_mdio_write;
|
|
lp->mii_if.phy_id = lp->ext_phy_addr;
|
|
|
|
/* Set receive buffer length and set jumbo option*/
|
|
amd8111e_set_rx_buff_len(dev);
|
|
|
|
|
|
err = register_netdev(dev);
|
|
if (err) {
|
|
printk(KERN_ERR "amd8111e: Cannot register net device, "
|
|
"exiting.\n");
|
|
goto err_iounmap;
|
|
}
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
/* Initialize software ipg timer */
|
|
if(lp->options & OPTION_DYN_IPG_ENABLE){
|
|
init_timer(&lp->ipg_data.ipg_timer);
|
|
lp->ipg_data.ipg_timer.data = (unsigned long) dev;
|
|
lp->ipg_data.ipg_timer.function = (void *)&amd8111e_config_ipg;
|
|
lp->ipg_data.ipg_timer.expires = jiffies +
|
|
IPG_CONVERGE_JIFFIES;
|
|
lp->ipg_data.ipg = DEFAULT_IPG;
|
|
lp->ipg_data.ipg_state = CSTATE;
|
|
};
|
|
|
|
/* display driver and device information */
|
|
|
|
chip_version = (readl(lp->mmio + CHIPID) & 0xf0000000)>>28;
|
|
printk(KERN_INFO "%s: AMD-8111e Driver Version: %s\n",
|
|
dev->name,MODULE_VERS);
|
|
printk(KERN_INFO "%s: [ Rev %x ] PCI 10/100BaseT Ethernet %pM\n",
|
|
dev->name, chip_version, dev->dev_addr);
|
|
if (lp->ext_phy_id)
|
|
printk(KERN_INFO "%s: Found MII PHY ID 0x%08x at address 0x%02x\n",
|
|
dev->name, lp->ext_phy_id, lp->ext_phy_addr);
|
|
else
|
|
printk(KERN_INFO "%s: Couldn't detect MII PHY, assuming address 0x01\n",
|
|
dev->name);
|
|
return 0;
|
|
err_iounmap:
|
|
iounmap(lp->mmio);
|
|
|
|
err_free_dev:
|
|
free_netdev(dev);
|
|
|
|
err_free_reg:
|
|
pci_release_regions(pdev);
|
|
|
|
err_disable_pdev:
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
return err;
|
|
|
|
}
|
|
|
|
static struct pci_driver amd8111e_driver = {
|
|
.name = MODULE_NAME,
|
|
.id_table = amd8111e_pci_tbl,
|
|
.probe = amd8111e_probe_one,
|
|
.remove = __devexit_p(amd8111e_remove_one),
|
|
.suspend = amd8111e_suspend,
|
|
.resume = amd8111e_resume
|
|
};
|
|
|
|
static int __init amd8111e_init(void)
|
|
{
|
|
return pci_register_driver(&amd8111e_driver);
|
|
}
|
|
|
|
static void __exit amd8111e_cleanup(void)
|
|
{
|
|
pci_unregister_driver(&amd8111e_driver);
|
|
}
|
|
|
|
module_init(amd8111e_init);
|
|
module_exit(amd8111e_cleanup);
|