korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-14 22:44:27 +08:00
Code Issues Packages Projects Releases Wiki Activity
48b1914873
linux/drivers/pci/hotplug/pciehp.h
rajesh.shah@intel.com a3a45ec8f8 [PATCH] pciehp: clean-up how we request control of hotplug hardware 
This patch further tweaks how we request control of hotplug
controller hardware from BIOS. We first search the ACPI namespace
corresponding to a specific hotplug controller looking for an
_OSC or OSHP method. On failure, we successively move to the
ACPI parent object, till we hit the highest level host bridge
in the hierarchy. This allows for different types of BIOS's
which place the _OSC/OSHP methods at various places in the acpi
namespace, while still not encroaching on the namespace of
some other root level host bridge.

This patch also introduces a new load time option (pciehp_force)
that allows us to bypass all _OSC/OSHP checking. Not supporting
these methods seems to be be the most common ACPI firmware problem
we've run into. This will still _not_ allow the pciehp driver to
work correctly if the BIOS really doesn't support pciehp (i.e. if
it doesn't generate a hotplug interrupt). Use this option with
caution.  Some BIOS's may deliberately not build any _OSC/OSHP
methods to make sure it retains control the hotplug hardware.
Using the pciehp_force parameter for such systems can lead to
two separate entities trying to control the same hardware.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10 16:09:15 -08:00

289 lines
8.5 KiB
C
Raw Blame History

/*
* PCI Express Hot Plug Controller Driver
*
* Copyright (C) 1995,2001 Compaq Computer Corporation
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2001 IBM Corp.
* Copyright (C) 2003-2004 Intel Corporation
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
#ifndef _PCIEHP_H
#define _PCIEHP_H
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/pcieport_if.h>
#include "pci_hotplug.h"
#define MY_NAME "pciehp"
extern int pciehp_poll_mode;
extern int pciehp_poll_time;
extern int pciehp_debug;
extern int pciehp_force;
/*#define dbg(format, arg...) do { if (pciehp_debug) printk(KERN_DEBUG "%s: " format, MY_NAME , ## arg); } while (0)*/
#define dbg(format, arg...) do { if (pciehp_debug) printk("%s: " format, MY_NAME , ## arg); } while (0)
#define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME , ## arg)
#define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
#define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
struct hotplug_params {
u8 cache_line_size;
u8 latency_timer;
u8 enable_serr;
u8 enable_perr;
};
struct slot {
struct slot *next;
u8 bus;
u8 device;
u16 status;
u32 number;
u8 state;
struct timer_list task_event;
u8 hp_slot;
struct controller *ctrl;
struct hpc_ops *hpc_ops;
struct hotplug_slot *hotplug_slot;
struct list_head slot_list;
};
struct event_info {
u32 event_type;
u8 hp_slot;
};
typedef u8(*php_intr_callback_t) (u8 hp_slot, void *instance_id);
struct php_ctlr_state_s {
struct php_ctlr_state_s *pnext;
struct pci_dev *pci_dev;
unsigned int irq;
unsigned long flags; /* spinlock's */
u32 slot_device_offset;
u32 num_slots;
struct timer_list int_poll_timer; /* Added for poll event */
php_intr_callback_t attention_button_callback;
php_intr_callback_t switch_change_callback;
php_intr_callback_t presence_change_callback;
php_intr_callback_t power_fault_callback;
void *callback_instance_id;
struct ctrl_reg *creg; /* Ptr to controller register space */
};
#define MAX_EVENTS 10
struct controller {
struct controller *next;
struct semaphore crit_sect; /* critical section semaphore */
struct php_ctlr_state_s *hpc_ctlr_handle; /* HPC controller handle */
int num_slots; /* Number of slots on ctlr */
int slot_num_inc; /* 1 or -1 */
struct pci_dev *pci_dev;
struct pci_bus *pci_bus;
struct event_info event_queue[MAX_EVENTS];
struct slot *slot;
struct hpc_ops *hpc_ops;
wait_queue_head_t queue; /* sleep & wake process */
u8 next_event;
u8 bus;
u8 device;
u8 function;
u8 slot_device_offset;
u32 first_slot; /* First physical slot number */ /* PCIE only has 1 slot */
u8 slot_bus; /* Bus where the slots handled by this controller sit */
u8 ctrlcap;
u16 vendor_id;
u8 cap_base;
};
#define INT_BUTTON_IGNORE 0
#define INT_PRESENCE_ON 1
#define INT_PRESENCE_OFF 2
#define INT_SWITCH_CLOSE 3
#define INT_SWITCH_OPEN 4
#define INT_POWER_FAULT 5
#define INT_POWER_FAULT_CLEAR 6
#define INT_BUTTON_PRESS 7
#define INT_BUTTON_RELEASE 8
#define INT_BUTTON_CANCEL 9
#define STATIC_STATE 0
#define BLINKINGON_STATE 1
#define BLINKINGOFF_STATE 2
#define POWERON_STATE 3
#define POWEROFF_STATE 4
#define PCI_TO_PCI_BRIDGE_CLASS 0x00060400
/* Error messages */
#define INTERLOCK_OPEN 0x00000002
#define ADD_NOT_SUPPORTED 0x00000003
#define CARD_FUNCTIONING 0x00000005
#define ADAPTER_NOT_SAME 0x00000006
#define NO_ADAPTER_PRESENT 0x00000009
#define NOT_ENOUGH_RESOURCES 0x0000000B
#define DEVICE_TYPE_NOT_SUPPORTED 0x0000000C
#define WRONG_BUS_FREQUENCY 0x0000000D
#define POWER_FAILURE 0x0000000E
#define REMOVE_NOT_SUPPORTED 0x00000003
#define DISABLE_CARD 1
/* Field definitions in Slot Capabilities Register */
#define ATTN_BUTTN_PRSN 0x00000001
#define PWR_CTRL_PRSN 0x00000002
#define MRL_SENS_PRSN 0x00000004
#define ATTN_LED_PRSN 0x00000008
#define PWR_LED_PRSN 0x00000010
#define HP_SUPR_RM_SUP 0x00000020
#define ATTN_BUTTN(cap) (cap & ATTN_BUTTN_PRSN)
#define POWER_CTRL(cap) (cap & PWR_CTRL_PRSN)
#define MRL_SENS(cap) (cap & MRL_SENS_PRSN)
#define ATTN_LED(cap) (cap & ATTN_LED_PRSN)
#define PWR_LED(cap) (cap & PWR_LED_PRSN)
#define HP_SUPR_RM(cap) (cap & HP_SUPR_RM_SUP)
/*
* error Messages
*/
#define msg_initialization_err "Initialization failure, error=%d\n"
#define msg_button_on "PCI slot #%d - powering on due to button press.\n"
#define msg_button_off "PCI slot #%d - powering off due to button press.\n"
#define msg_button_cancel "PCI slot #%d - action canceled due to button press.\n"
#define msg_button_ignore "PCI slot #%d - button press ignored. (action in progress...)\n"
/* controller functions */
extern int pciehp_event_start_thread (void);
extern void pciehp_event_stop_thread (void);
extern int pciehp_enable_slot (struct slot *slot);
extern int pciehp_disable_slot (struct slot *slot);
extern u8 pciehp_handle_attention_button (u8 hp_slot, void *inst_id);
extern u8 pciehp_handle_switch_change (u8 hp_slot, void *inst_id);
extern u8 pciehp_handle_presence_change (u8 hp_slot, void *inst_id);
extern u8 pciehp_handle_power_fault (u8 hp_slot, void *inst_id);
/* extern void long_delay (int delay); */
/* pci functions */
extern int pciehp_configure_device (struct slot *p_slot);
extern int pciehp_unconfigure_device (struct slot *p_slot);
extern int get_hp_hw_control_from_firmware(struct pci_dev *dev);
extern void get_hp_params_from_firmware(struct pci_dev *dev,
struct hotplug_params *hpp);
/* Global variables */
extern struct controller *pciehp_ctrl_list;
/* Inline functions */
static inline struct slot *pciehp_find_slot(struct controller *ctrl, u8 device)
{
struct slot *p_slot, *tmp_slot = NULL;
p_slot = ctrl->slot;
while (p_slot && (p_slot->device != device)) {
tmp_slot = p_slot;
p_slot = p_slot->next;
}
if (p_slot == NULL) {
err("ERROR: pciehp_find_slot device=0x%x\n", device);
p_slot = tmp_slot;
}
return p_slot;
}
static inline int wait_for_ctrl_irq(struct controller *ctrl)
{
int retval = 0;
DECLARE_WAITQUEUE(wait, current);
add_wait_queue(&ctrl->queue, &wait);
if (!pciehp_poll_mode)
/* Sleep for up to 1 second */
msleep_interruptible(1000);
else
msleep_interruptible(2500);
remove_wait_queue(&ctrl->queue, &wait);
if (signal_pending(current))
retval = -EINTR;
return retval;
}
#define SLOT_NAME_SIZE 10
static inline void make_slot_name(char *buffer, int buffer_size, struct slot *slot)
{
snprintf(buffer, buffer_size, "%04d_%04d", slot->bus, slot->number);
}
enum php_ctlr_type {
PCI,
ISA,
ACPI
};
int pcie_init(struct controller *ctrl, struct pcie_device *dev);
/* This has no meaning for PCI Express, as there is only 1 slot per port */
int pcie_get_ctlr_slot_config(struct controller *ctrl,
int *num_ctlr_slots,
int *first_device_num,
int *physical_slot_num,
u8 *ctrlcap);
struct hpc_ops {
int (*power_on_slot) (struct slot *slot);
int (*power_off_slot) (struct slot *slot);
int (*get_power_status) (struct slot *slot, u8 *status);
int (*get_attention_status) (struct slot *slot, u8 *status);
int (*set_attention_status) (struct slot *slot, u8 status);
int (*get_latch_status) (struct slot *slot, u8 *status);
int (*get_adapter_status) (struct slot *slot, u8 *status);
int (*get_max_bus_speed) (struct slot *slot, enum pci_bus_speed *speed);
int (*get_cur_bus_speed) (struct slot *slot, enum pci_bus_speed *speed);
int (*get_max_lnk_width) (struct slot *slot, enum pcie_link_width *value);
int (*get_cur_lnk_width) (struct slot *slot, enum pcie_link_width *value);
int (*query_power_fault) (struct slot *slot);
void (*green_led_on) (struct slot *slot);
void (*green_led_off) (struct slot *slot);
void (*green_led_blink) (struct slot *slot);
void (*release_ctlr) (struct controller *ctrl);
int (*check_lnk_status) (struct controller *ctrl);
};
#endif /* _PCIEHP_H */
Reference in New Issue View Git Blame Copy Permalink