mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-28 05:24:47 +08:00
df09df6f9a
The odroid-xu3 board which is based on exynos5422 not exynos5800 is booted from cortex-a7 core unlike exynos5800. The odroid-xu3's cpu order is quite strange. cpu0 and cpu5-7 are cortex-a7 cores and cpu1-4 are cortex-a15 cores. To correct this mis-odering, I added exynos5422-cpus.dtsi and reversing cpu orders from exynos5420. Now, cpu0-3 are cortex-a7 and cpu4-7 are cortex-a15. Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Chanho Park <parkch98@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
527 lines
11 KiB
Plaintext
527 lines
11 KiB
Plaintext
/*
|
|
* Hardkernel Odroid XU3 board device tree source
|
|
*
|
|
* Copyright (c) 2014 Collabora Ltd.
|
|
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/samsung,s2mps11.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/sound/samsung-i2s.h>
|
|
#include "exynos5800.dtsi"
|
|
#include "exynos5422-cpus.dtsi"
|
|
#include "exynos5422-cpu-thermal.dtsi"
|
|
|
|
/ {
|
|
memory {
|
|
reg = <0x40000000 0x7EA00000>;
|
|
};
|
|
|
|
chosen {
|
|
linux,stdout-path = &serial_2;
|
|
};
|
|
|
|
firmware@02073000 {
|
|
compatible = "samsung,secure-firmware";
|
|
reg = <0x02073000 0x1000>;
|
|
};
|
|
|
|
fixed-rate-clocks {
|
|
oscclk {
|
|
compatible = "samsung,exynos5420-oscclk";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
};
|
|
|
|
emmc_pwrseq: pwrseq {
|
|
pinctrl-0 = <&emmc_nrst_pin>;
|
|
pinctrl-names = "default";
|
|
compatible = "mmc-pwrseq-emmc";
|
|
reset-gpios = <&gpd1 0 1>;
|
|
};
|
|
|
|
pwmleds {
|
|
compatible = "pwm-leds";
|
|
|
|
greenled {
|
|
label = "green:mmc0";
|
|
pwms = <&pwm 1 2000000 0>;
|
|
pwm-names = "pwm1";
|
|
/*
|
|
* Green LED is much brighter than the others
|
|
* so limit its max brightness
|
|
*/
|
|
max_brightness = <127>;
|
|
linux,default-trigger = "mmc0";
|
|
};
|
|
|
|
blueled {
|
|
label = "blue:heartbeat";
|
|
pwms = <&pwm 2 2000000 0>;
|
|
pwm-names = "pwm2";
|
|
max_brightness = <255>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
gpioleds {
|
|
compatible = "gpio-leds";
|
|
redled {
|
|
label = "red:microSD";
|
|
gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
linux,default-trigger = "mmc1";
|
|
};
|
|
};
|
|
|
|
sound: sound {
|
|
compatible = "simple-audio-card";
|
|
|
|
simple-audio-card,name = "Odroid-XU3";
|
|
simple-audio-card,widgets =
|
|
"Headphone", "Headphone Jack",
|
|
"Speakers", "Speakers";
|
|
simple-audio-card,routing =
|
|
"Headphone Jack", "HPL",
|
|
"Headphone Jack", "HPR",
|
|
"Headphone Jack", "MICBIAS",
|
|
"IN1", "Headphone Jack",
|
|
"Speakers", "SPKL",
|
|
"Speakers", "SPKR";
|
|
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,bitclock-master = <&link0_codec>;
|
|
simple-audio-card,frame-master = <&link0_codec>;
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s0 0>;
|
|
system-clock-frequency = <19200000>;
|
|
};
|
|
|
|
link0_codec: simple-audio-card,codec {
|
|
sound-dai = <&max98090>;
|
|
clocks = <&i2s0 CLK_I2S_CDCLK>;
|
|
};
|
|
};
|
|
|
|
fan0: pwm-fan {
|
|
compatible = "pwm-fan";
|
|
pwms = <&pwm 0 20972 0>;
|
|
cooling-min-state = <0>;
|
|
cooling-max-state = <3>;
|
|
#cooling-cells = <2>;
|
|
cooling-levels = <0 130 170 230>;
|
|
};
|
|
};
|
|
|
|
&clock_audss {
|
|
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
|
|
<&clock_audss EXYNOS_MOUT_I2S>,
|
|
<&clock_audss EXYNOS_DOUT_AUD_BUS>;
|
|
assigned-clock-parents = <&clock CLK_FIN_PLL>,
|
|
<&clock_audss EXYNOS_MOUT_AUDSS>;
|
|
assigned-clock-rates = <0>,
|
|
<0>,
|
|
<19200000>;
|
|
};
|
|
|
|
&fimd {
|
|
status = "okay";
|
|
};
|
|
|
|
|
|
&hdmi {
|
|
status = "okay";
|
|
hpd-gpio = <&gpx3 7 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hdmi_hpd_irq>;
|
|
|
|
vdd_osc-supply = <&ldo7_reg>;
|
|
vdd_pll-supply = <&ldo6_reg>;
|
|
vdd-supply = <&ldo6_reg>;
|
|
};
|
|
|
|
&hsi2c_4 {
|
|
status = "okay";
|
|
|
|
s2mps11_pmic@66 {
|
|
compatible = "samsung,s2mps11-pmic";
|
|
reg = <0x66>;
|
|
s2mps11,buck2-ramp-delay = <12>;
|
|
s2mps11,buck34-ramp-delay = <12>;
|
|
s2mps11,buck16-ramp-delay = <12>;
|
|
s2mps11,buck6-ramp-enable = <1>;
|
|
s2mps11,buck2-ramp-enable = <1>;
|
|
s2mps11,buck3-ramp-enable = <1>;
|
|
s2mps11,buck4-ramp-enable = <1>;
|
|
|
|
interrupt-parent = <&gpx0>;
|
|
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&s2mps11_irq>;
|
|
|
|
s2mps11_osc: clocks {
|
|
#clock-cells = <1>;
|
|
clock-output-names = "s2mps11_ap",
|
|
"s2mps11_cp", "s2mps11_bt";
|
|
};
|
|
|
|
regulators {
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "vdd_ldo1";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "vdd_ldo3";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo5_reg: LDO5 {
|
|
regulator-name = "vdd_ldo5";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo6_reg: LDO6 {
|
|
regulator-name = "vdd_ldo6";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo7_reg: LDO7 {
|
|
regulator-name = "vdd_ldo7";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo8_reg: LDO8 {
|
|
regulator-name = "vdd_ldo8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo9_reg: LDO9 {
|
|
regulator-name = "vdd_ldo9";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo10_reg: LDO10 {
|
|
regulator-name = "vdd_ldo10";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo11_reg: LDO11 {
|
|
regulator-name = "vdd_ldo11";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo12_reg: LDO12 {
|
|
regulator-name = "vdd_ldo12";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo13_reg: LDO13 {
|
|
regulator-name = "vdd_ldo13";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo15_reg: LDO15 {
|
|
regulator-name = "vdd_ldo15";
|
|
regulator-min-microvolt = <3100000>;
|
|
regulator-max-microvolt = <3100000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo16_reg: LDO16 {
|
|
regulator-name = "vdd_ldo16";
|
|
regulator-min-microvolt = <2200000>;
|
|
regulator-max-microvolt = <2200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo17_reg: LDO17 {
|
|
regulator-name = "tsp_avdd";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo19_reg: LDO19 {
|
|
regulator-name = "vdd_sd";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo24_reg: LDO24 {
|
|
regulator-name = "tsp_io";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo26_reg: LDO26 {
|
|
regulator-name = "vdd_ldo26";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "vdd_mif";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "vdd_arm";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck3_reg: BUCK3 {
|
|
regulator-name = "vdd_int";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
regulator-name = "vdd_g3d";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck5_reg: BUCK5 {
|
|
regulator-name = "vdd_mem";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck6_reg: BUCK6 {
|
|
regulator-name = "vdd_kfc";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck7_reg: BUCK7 {
|
|
regulator-name = "vdd_1.0v_ldo";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck8_reg: BUCK8 {
|
|
regulator-name = "vdd_1.8v_ldo";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck9_reg: BUCK9 {
|
|
regulator-name = "vdd_2.8v_ldo";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3750000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck10_reg: BUCK10 {
|
|
regulator-name = "vdd_vmem";
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&hsi2c_5 {
|
|
status = "okay";
|
|
max98090: max98090@10 {
|
|
compatible = "maxim,max98090";
|
|
reg = <0x10>;
|
|
interrupt-parent = <&gpx3>;
|
|
interrupts = <2 0>;
|
|
clocks = <&i2s0 CLK_I2S_CDCLK>;
|
|
clock-names = "mclk";
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&i2c_2 {
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <66000>;
|
|
status = "okay";
|
|
|
|
hdmiddc@50 {
|
|
compatible = "samsung,exynos4210-hdmiddc";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
&i2s0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mfc {
|
|
samsung,mfc-r = <0x43000000 0x800000>;
|
|
samsung,mfc-l = <0x51000000 0x800000>;
|
|
};
|
|
|
|
&mmc_0 {
|
|
status = "okay";
|
|
mmc-pwrseq = <&emmc_pwrseq>;
|
|
cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
|
|
card-detect-delay = <200>;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <0 4>;
|
|
samsung,dw-mshc-ddr-timing = <0 2>;
|
|
samsung,dw-mshc-hs400-timing = <0 2>;
|
|
samsung,read-strobe-delay = <90>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
mmc-hs200-1_8v;
|
|
mmc-hs400-1_8v;
|
|
};
|
|
|
|
&mmc_2 {
|
|
status = "okay";
|
|
card-detect-delay = <200>;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <0 4>;
|
|
samsung,dw-mshc-ddr-timing = <0 2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
};
|
|
|
|
&pinctrl_0 {
|
|
hdmi_hpd_irq: hdmi-hpd-irq {
|
|
samsung,pins = "gpx3-7";
|
|
samsung,pin-function = <0>;
|
|
samsung,pin-pud = <1>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
s2mps11_irq: s2mps11-irq {
|
|
samsung,pins = "gpx0-4";
|
|
samsung,pin-function = <0xf>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
};
|
|
|
|
&pinctrl_1 {
|
|
emmc_nrst_pin: emmc-nrst {
|
|
samsung,pins = "gpd1-0";
|
|
samsung,pin-function = <0>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
};
|
|
|
|
&pwm {
|
|
/*
|
|
* PWM 0 -- fan
|
|
* PWM 1 -- Green LED
|
|
* PWM 2 -- Blue LED
|
|
* PWM 3 -- on MIPI connector for backlight
|
|
*/
|
|
pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
|
|
pinctrl-names = "default";
|
|
samsung,pwm-outputs = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&tmu_cpu0 {
|
|
vtmu-supply = <&ldo7_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&tmu_cpu1 {
|
|
vtmu-supply = <&ldo7_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&tmu_cpu2 {
|
|
vtmu-supply = <&ldo7_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&tmu_cpu3 {
|
|
vtmu-supply = <&ldo7_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&tmu_gpu {
|
|
vtmu-supply = <&ldo7_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
|
|
clock-names = "rtc", "rtc_src";
|
|
};
|
|
|
|
&usbdrd_dwc3_0 {
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&usbdrd_dwc3_1 {
|
|
dr_mode = "otg";
|
|
};
|
|
|
|
&usbdrd3_0 {
|
|
vdd33-supply = <&ldo9_reg>;
|
|
vdd10-supply = <&ldo11_reg>;
|
|
};
|
|
|
|
&usbdrd3_1 {
|
|
vdd33-supply = <&ldo9_reg>;
|
|
vdd10-supply = <&ldo11_reg>;
|
|
};
|