korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-16 00:34:20 +08:00
Code Issues Packages Projects Releases Wiki Activity
4819e15f74
linux/arch/x86/math-emu/get_address.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

402 lines
10 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*---------------------------------------------------------------------------+
| get_address.c |
| |
| Get the effective address from an FPU instruction. |
| |
| Copyright (C) 1992,1993,1994,1997 |
| W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
| Australia. E-mail billm@suburbia.net |
| |
| |
+---------------------------------------------------------------------------*/
/*---------------------------------------------------------------------------+
| Note: |
| The file contains code which accesses user memory. |
| Emulator static data may change when user memory is accessed, due to |
| other processes using the emulator while swapping is in progress. |
+---------------------------------------------------------------------------*/
#include <linux/stddef.h>
#include <linux/uaccess.h>
#include <asm/vm86.h>
#include "fpu_system.h"
#include "exception.h"
#include "fpu_emu.h"
#define FPU_WRITE_BIT 0x10
static int reg_offset[] = {
offsetof(struct pt_regs, ax),
offsetof(struct pt_regs, cx),
offsetof(struct pt_regs, dx),
offsetof(struct pt_regs, bx),
offsetof(struct pt_regs, sp),
offsetof(struct pt_regs, bp),
offsetof(struct pt_regs, si),
offsetof(struct pt_regs, di)
};
#define REG_(x) (*(long *)(reg_offset[(x)] + (u_char *)FPU_info->regs))
static int reg_offset_vm86[] = {
offsetof(struct pt_regs, cs),
offsetof(struct kernel_vm86_regs, ds),
offsetof(struct kernel_vm86_regs, es),
offsetof(struct kernel_vm86_regs, fs),
offsetof(struct kernel_vm86_regs, gs),
offsetof(struct pt_regs, ss),
offsetof(struct kernel_vm86_regs, ds)
};
#define VM86_REG_(x) (*(unsigned short *) \
(reg_offset_vm86[((unsigned)x)] + (u_char *)FPU_info->regs))
static int reg_offset_pm[] = {
offsetof(struct pt_regs, cs),
offsetof(struct pt_regs, ds),
offsetof(struct pt_regs, es),
offsetof(struct pt_regs, fs),
offsetof(struct pt_regs, ds), /* dummy, not saved on stack */
offsetof(struct pt_regs, ss),
offsetof(struct pt_regs, ds)
};
#define PM_REG_(x) (*(unsigned short *) \
(reg_offset_pm[((unsigned)x)] + (u_char *)FPU_info->regs))
/* Decode the SIB byte. This function assumes mod != 0 */
static int sib(int mod, unsigned long *fpu_eip)
{
u_char ss, index, base;
long offset;
RE_ENTRANT_CHECK_OFF;
FPU_code_access_ok(1);
FPU_get_user(base, (u_char __user *) (*fpu_eip)); /* The SIB byte */
RE_ENTRANT_CHECK_ON;
(*fpu_eip)++;
ss = base >> 6;
index = (base >> 3) & 7;
base &= 7;
if ((mod == 0) && (base == 5))
offset = 0; /* No base register */
else
offset = REG_(base);
if (index == 4) {
/* No index register */
/* A non-zero ss is illegal */
if (ss)
EXCEPTION(EX_Invalid);
} else {
offset += (REG_(index)) << ss;
}
if (mod == 1) {
/* 8 bit signed displacement */
long displacement;
RE_ENTRANT_CHECK_OFF;
FPU_code_access_ok(1);
FPU_get_user(displacement, (signed char __user *)(*fpu_eip));
offset += displacement;
RE_ENTRANT_CHECK_ON;
(*fpu_eip)++;
} else if (mod == 2 || base == 5) { /* The second condition also has mod==0 */
/* 32 bit displacement */
long displacement;
RE_ENTRANT_CHECK_OFF;
FPU_code_access_ok(4);
FPU_get_user(displacement, (long __user *)(*fpu_eip));
offset += displacement;
RE_ENTRANT_CHECK_ON;
(*fpu_eip) += 4;
}
return offset;
}
static unsigned long vm86_segment(u_char segment, struct address *addr)
{
segment--;
#ifdef PARANOID
if (segment > PREFIX_SS_) {
EXCEPTION(EX_INTERNAL | 0x130);
math_abort(FPU_info, SIGSEGV);
}
#endif /* PARANOID */
addr->selector = VM86_REG_(segment);
return (unsigned long)VM86_REG_(segment) << 4;
}
/* This should work for 16 and 32 bit protected mode. */
static long pm_address(u_char FPU_modrm, u_char segment,
struct address *addr, long offset)
{
struct desc_struct descriptor;
unsigned long base_address, limit, address, seg_top;
segment--;
#ifdef PARANOID
/* segment is unsigned, so this also detects if segment was 0: */
if (segment > PREFIX_SS_) {
EXCEPTION(EX_INTERNAL | 0x132);
math_abort(FPU_info, SIGSEGV);
}
#endif /* PARANOID */
switch (segment) {
case PREFIX_GS_ - 1:
/* user gs handling can be lazy, use special accessors */
addr->selector = get_user_gs(FPU_info->regs);
break;
default:
addr->selector = PM_REG_(segment);
}
descriptor = FPU_get_ldt_descriptor(addr->selector);
base_address = seg_get_base(&descriptor);
address = base_address + offset;
limit = seg_get_limit(&descriptor) + 1;
limit *= seg_get_granularity(&descriptor);
limit += base_address - 1;
if (limit < base_address)
limit = 0xffffffff;
if (seg_expands_down(&descriptor)) {
if (descriptor.g) {
seg_top = 0xffffffff;
} else {
seg_top = base_address + (1 << 20);
if (seg_top < base_address)
seg_top = 0xffffffff;
}
access_limit =
(address <= limit) || (address >= seg_top) ? 0 :
((seg_top - address) >= 255 ? 255 : seg_top - address);
} else {
access_limit =
(address > limit) || (address < base_address) ? 0 :
((limit - address) >= 254 ? 255 : limit - address + 1);
}
if (seg_execute_only(&descriptor) ||
(!seg_writable(&descriptor) && (FPU_modrm & FPU_WRITE_BIT))) {
access_limit = 0;
}
return address;
}
/*
MOD R/M byte: MOD == 3 has a special use for the FPU
SIB byte used iff R/M = 100b
7 6 5 4 3 2 1 0
..... ......... .........
MOD OPCODE(2) R/M
SIB byte
7 6 5 4 3 2 1 0
..... ......... .........
SS INDEX BASE
*/
void __user *FPU_get_address(u_char FPU_modrm, unsigned long *fpu_eip,
struct address *addr, fpu_addr_modes addr_modes)
{
u_char mod;
unsigned rm = FPU_modrm & 7;
long *cpu_reg_ptr;
int address = 0; /* Initialized just to stop compiler warnings. */
/* Memory accessed via the cs selector is write protected
in `non-segmented' 32 bit protected mode. */
if (!addr_modes.default_mode && (FPU_modrm & FPU_WRITE_BIT)
&& (addr_modes.override.segment == PREFIX_CS_)) {
math_abort(FPU_info, SIGSEGV);
}
addr->selector = FPU_DS; /* Default, for 32 bit non-segmented mode. */
mod = (FPU_modrm >> 6) & 3;
if (rm == 4 && mod != 3) {
address = sib(mod, fpu_eip);
} else {
cpu_reg_ptr = &REG_(rm);
switch (mod) {
case 0:
if (rm == 5) {
/* Special case: disp32 */
RE_ENTRANT_CHECK_OFF;
FPU_code_access_ok(4);
FPU_get_user(address,
(unsigned long __user
*)(*fpu_eip));
(*fpu_eip) += 4;
RE_ENTRANT_CHECK_ON;
addr->offset = address;
return (void __user *)address;
} else {
address = *cpu_reg_ptr; /* Just return the contents
of the cpu register */
addr->offset = address;
return (void __user *)address;
}
case 1:
/* 8 bit signed displacement */
RE_ENTRANT_CHECK_OFF;
FPU_code_access_ok(1);
FPU_get_user(address, (signed char __user *)(*fpu_eip));
RE_ENTRANT_CHECK_ON;
(*fpu_eip)++;
break;
case 2:
/* 32 bit displacement */
RE_ENTRANT_CHECK_OFF;
FPU_code_access_ok(4);
FPU_get_user(address, (long __user *)(*fpu_eip));
(*fpu_eip) += 4;
RE_ENTRANT_CHECK_ON;
break;
case 3:
/* Not legal for the FPU */
EXCEPTION(EX_Invalid);
}
address += *cpu_reg_ptr;
}
addr->offset = address;
switch (addr_modes.default_mode) {
case 0:
break;
case VM86:
address += vm86_segment(addr_modes.override.segment, addr);
break;
case PM16:
case SEG32:
address = pm_address(FPU_modrm, addr_modes.override.segment,
addr, address);
break;
default:
EXCEPTION(EX_INTERNAL | 0x133);
}
return (void __user *)address;
}
void __user *FPU_get_address_16(u_char FPU_modrm, unsigned long *fpu_eip,
struct address *addr, fpu_addr_modes addr_modes)
{
u_char mod;
unsigned rm = FPU_modrm & 7;
int address = 0; /* Default used for mod == 0 */
/* Memory accessed via the cs selector is write protected
in `non-segmented' 32 bit protected mode. */
if (!addr_modes.default_mode && (FPU_modrm & FPU_WRITE_BIT)
&& (addr_modes.override.segment == PREFIX_CS_)) {
math_abort(FPU_info, SIGSEGV);
}
addr->selector = FPU_DS; /* Default, for 32 bit non-segmented mode. */
mod = (FPU_modrm >> 6) & 3;
switch (mod) {
case 0:
if (rm == 6) {
/* Special case: disp16 */
RE_ENTRANT_CHECK_OFF;
FPU_code_access_ok(2);
FPU_get_user(address,
(unsigned short __user *)(*fpu_eip));
(*fpu_eip) += 2;
RE_ENTRANT_CHECK_ON;
goto add_segment;
}
break;
case 1:
/* 8 bit signed displacement */
RE_ENTRANT_CHECK_OFF;
FPU_code_access_ok(1);
FPU_get_user(address, (signed char __user *)(*fpu_eip));
RE_ENTRANT_CHECK_ON;
(*fpu_eip)++;
break;
case 2:
/* 16 bit displacement */
RE_ENTRANT_CHECK_OFF;
FPU_code_access_ok(2);
FPU_get_user(address, (unsigned short __user *)(*fpu_eip));
(*fpu_eip) += 2;
RE_ENTRANT_CHECK_ON;
break;
case 3:
/* Not legal for the FPU */
EXCEPTION(EX_Invalid);
break;
}
switch (rm) {
case 0:
address += FPU_info->regs->bx + FPU_info->regs->si;
break;
case 1:
address += FPU_info->regs->bx + FPU_info->regs->di;
break;
case 2:
address += FPU_info->regs->bp + FPU_info->regs->si;
if (addr_modes.override.segment == PREFIX_DEFAULT)
addr_modes.override.segment = PREFIX_SS_;
break;
case 3:
address += FPU_info->regs->bp + FPU_info->regs->di;
if (addr_modes.override.segment == PREFIX_DEFAULT)
addr_modes.override.segment = PREFIX_SS_;
break;
case 4:
address += FPU_info->regs->si;
break;
case 5:
address += FPU_info->regs->di;
break;
case 6:
address += FPU_info->regs->bp;
if (addr_modes.override.segment == PREFIX_DEFAULT)
addr_modes.override.segment = PREFIX_SS_;
break;
case 7:
address += FPU_info->regs->bx;
break;
}
add_segment:
address &= 0xffff;
addr->offset = address;
switch (addr_modes.default_mode) {
case 0:
break;
case VM86:
address += vm86_segment(addr_modes.override.segment, addr);
break;
case PM16:
case SEG32:
address = pm_address(FPU_modrm, addr_modes.override.segment,
addr, address);
break;
default:
EXCEPTION(EX_INTERNAL | 0x131);
}
return (void __user *)address;
}
Reference in New Issue View Git Blame Copy Permalink