mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-13 14:04:05 +08:00
bf4d843050
N34TS04 is a JC42.4 compatible temperature sensor from ONSEMI. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
600 lines
15 KiB
C
600 lines
15 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* jc42.c - driver for Jedec JC42.4 compliant temperature sensors
|
|
*
|
|
* Copyright (c) 2010 Ericsson AB.
|
|
*
|
|
* Derived from lm77.c by Andras BALI <drewie@freemail.hu>.
|
|
*
|
|
* JC42.4 compliant temperature sensors are typically used on memory modules.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
|
|
/* Addresses to scan */
|
|
static const unsigned short normal_i2c[] = {
|
|
0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, I2C_CLIENT_END };
|
|
|
|
/* JC42 registers. All registers are 16 bit. */
|
|
#define JC42_REG_CAP 0x00
|
|
#define JC42_REG_CONFIG 0x01
|
|
#define JC42_REG_TEMP_UPPER 0x02
|
|
#define JC42_REG_TEMP_LOWER 0x03
|
|
#define JC42_REG_TEMP_CRITICAL 0x04
|
|
#define JC42_REG_TEMP 0x05
|
|
#define JC42_REG_MANID 0x06
|
|
#define JC42_REG_DEVICEID 0x07
|
|
#define JC42_REG_SMBUS 0x22 /* NXP and Atmel, possibly others? */
|
|
|
|
/* Status bits in temperature register */
|
|
#define JC42_ALARM_CRIT_BIT 15
|
|
#define JC42_ALARM_MAX_BIT 14
|
|
#define JC42_ALARM_MIN_BIT 13
|
|
|
|
/* Configuration register defines */
|
|
#define JC42_CFG_CRIT_ONLY (1 << 2)
|
|
#define JC42_CFG_TCRIT_LOCK (1 << 6)
|
|
#define JC42_CFG_EVENT_LOCK (1 << 7)
|
|
#define JC42_CFG_SHUTDOWN (1 << 8)
|
|
#define JC42_CFG_HYST_SHIFT 9
|
|
#define JC42_CFG_HYST_MASK (0x03 << 9)
|
|
|
|
/* Capabilities */
|
|
#define JC42_CAP_RANGE (1 << 2)
|
|
|
|
/* Manufacturer IDs */
|
|
#define ADT_MANID 0x11d4 /* Analog Devices */
|
|
#define ATMEL_MANID 0x001f /* Atmel */
|
|
#define ATMEL_MANID2 0x1114 /* Atmel */
|
|
#define MAX_MANID 0x004d /* Maxim */
|
|
#define IDT_MANID 0x00b3 /* IDT */
|
|
#define MCP_MANID 0x0054 /* Microchip */
|
|
#define NXP_MANID 0x1131 /* NXP Semiconductors */
|
|
#define ONS_MANID 0x1b09 /* ON Semiconductor */
|
|
#define STM_MANID 0x104a /* ST Microelectronics */
|
|
#define GT_MANID 0x1c68 /* Giantec */
|
|
#define GT_MANID2 0x132d /* Giantec, 2nd mfg ID */
|
|
|
|
/* SMBUS register */
|
|
#define SMBUS_STMOUT BIT(7) /* SMBus time-out, active low */
|
|
|
|
/* Supported chips */
|
|
|
|
/* Analog Devices */
|
|
#define ADT7408_DEVID 0x0801
|
|
#define ADT7408_DEVID_MASK 0xffff
|
|
|
|
/* Atmel */
|
|
#define AT30TS00_DEVID 0x8201
|
|
#define AT30TS00_DEVID_MASK 0xffff
|
|
|
|
#define AT30TSE004_DEVID 0x2200
|
|
#define AT30TSE004_DEVID_MASK 0xffff
|
|
|
|
/* Giantec */
|
|
#define GT30TS00_DEVID 0x2200
|
|
#define GT30TS00_DEVID_MASK 0xff00
|
|
|
|
#define GT34TS02_DEVID 0x3300
|
|
#define GT34TS02_DEVID_MASK 0xff00
|
|
|
|
/* IDT */
|
|
#define TSE2004_DEVID 0x2200
|
|
#define TSE2004_DEVID_MASK 0xff00
|
|
|
|
#define TS3000_DEVID 0x2900 /* Also matches TSE2002 */
|
|
#define TS3000_DEVID_MASK 0xff00
|
|
|
|
#define TS3001_DEVID 0x3000
|
|
#define TS3001_DEVID_MASK 0xff00
|
|
|
|
/* Maxim */
|
|
#define MAX6604_DEVID 0x3e00
|
|
#define MAX6604_DEVID_MASK 0xffff
|
|
|
|
/* Microchip */
|
|
#define MCP9804_DEVID 0x0200
|
|
#define MCP9804_DEVID_MASK 0xfffc
|
|
|
|
#define MCP9808_DEVID 0x0400
|
|
#define MCP9808_DEVID_MASK 0xfffc
|
|
|
|
#define MCP98242_DEVID 0x2000
|
|
#define MCP98242_DEVID_MASK 0xfffc
|
|
|
|
#define MCP98243_DEVID 0x2100
|
|
#define MCP98243_DEVID_MASK 0xfffc
|
|
|
|
#define MCP98244_DEVID 0x2200
|
|
#define MCP98244_DEVID_MASK 0xfffc
|
|
|
|
#define MCP9843_DEVID 0x0000 /* Also matches mcp9805 */
|
|
#define MCP9843_DEVID_MASK 0xfffe
|
|
|
|
/* NXP */
|
|
#define SE97_DEVID 0xa200
|
|
#define SE97_DEVID_MASK 0xfffc
|
|
|
|
#define SE98_DEVID 0xa100
|
|
#define SE98_DEVID_MASK 0xfffc
|
|
|
|
/* ON Semiconductor */
|
|
#define CAT6095_DEVID 0x0800 /* Also matches CAT34TS02 */
|
|
#define CAT6095_DEVID_MASK 0xffe0
|
|
|
|
#define CAT34TS02C_DEVID 0x0a00
|
|
#define CAT34TS02C_DEVID_MASK 0xfff0
|
|
|
|
#define CAT34TS04_DEVID 0x2200
|
|
#define CAT34TS04_DEVID_MASK 0xfff0
|
|
|
|
#define N34TS04_DEVID 0x2230
|
|
#define N34TS04_DEVID_MASK 0xfff0
|
|
|
|
/* ST Microelectronics */
|
|
#define STTS424_DEVID 0x0101
|
|
#define STTS424_DEVID_MASK 0xffff
|
|
|
|
#define STTS424E_DEVID 0x0000
|
|
#define STTS424E_DEVID_MASK 0xfffe
|
|
|
|
#define STTS2002_DEVID 0x0300
|
|
#define STTS2002_DEVID_MASK 0xffff
|
|
|
|
#define STTS2004_DEVID 0x2201
|
|
#define STTS2004_DEVID_MASK 0xffff
|
|
|
|
#define STTS3000_DEVID 0x0200
|
|
#define STTS3000_DEVID_MASK 0xffff
|
|
|
|
static u16 jc42_hysteresis[] = { 0, 1500, 3000, 6000 };
|
|
|
|
struct jc42_chips {
|
|
u16 manid;
|
|
u16 devid;
|
|
u16 devid_mask;
|
|
};
|
|
|
|
static struct jc42_chips jc42_chips[] = {
|
|
{ ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK },
|
|
{ ATMEL_MANID, AT30TS00_DEVID, AT30TS00_DEVID_MASK },
|
|
{ ATMEL_MANID2, AT30TSE004_DEVID, AT30TSE004_DEVID_MASK },
|
|
{ GT_MANID, GT30TS00_DEVID, GT30TS00_DEVID_MASK },
|
|
{ GT_MANID2, GT34TS02_DEVID, GT34TS02_DEVID_MASK },
|
|
{ IDT_MANID, TSE2004_DEVID, TSE2004_DEVID_MASK },
|
|
{ IDT_MANID, TS3000_DEVID, TS3000_DEVID_MASK },
|
|
{ IDT_MANID, TS3001_DEVID, TS3001_DEVID_MASK },
|
|
{ MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK },
|
|
{ MCP_MANID, MCP9804_DEVID, MCP9804_DEVID_MASK },
|
|
{ MCP_MANID, MCP9808_DEVID, MCP9808_DEVID_MASK },
|
|
{ MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK },
|
|
{ MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK },
|
|
{ MCP_MANID, MCP98244_DEVID, MCP98244_DEVID_MASK },
|
|
{ MCP_MANID, MCP9843_DEVID, MCP9843_DEVID_MASK },
|
|
{ NXP_MANID, SE97_DEVID, SE97_DEVID_MASK },
|
|
{ ONS_MANID, CAT6095_DEVID, CAT6095_DEVID_MASK },
|
|
{ ONS_MANID, CAT34TS02C_DEVID, CAT34TS02C_DEVID_MASK },
|
|
{ ONS_MANID, CAT34TS04_DEVID, CAT34TS04_DEVID_MASK },
|
|
{ ONS_MANID, N34TS04_DEVID, N34TS04_DEVID_MASK },
|
|
{ NXP_MANID, SE98_DEVID, SE98_DEVID_MASK },
|
|
{ STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK },
|
|
{ STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK },
|
|
{ STM_MANID, STTS2002_DEVID, STTS2002_DEVID_MASK },
|
|
{ STM_MANID, STTS2004_DEVID, STTS2004_DEVID_MASK },
|
|
{ STM_MANID, STTS3000_DEVID, STTS3000_DEVID_MASK },
|
|
};
|
|
|
|
enum temp_index {
|
|
t_input = 0,
|
|
t_crit,
|
|
t_min,
|
|
t_max,
|
|
t_num_temp
|
|
};
|
|
|
|
static const u8 temp_regs[t_num_temp] = {
|
|
[t_input] = JC42_REG_TEMP,
|
|
[t_crit] = JC42_REG_TEMP_CRITICAL,
|
|
[t_min] = JC42_REG_TEMP_LOWER,
|
|
[t_max] = JC42_REG_TEMP_UPPER,
|
|
};
|
|
|
|
/* Each client has this additional data */
|
|
struct jc42_data {
|
|
struct i2c_client *client;
|
|
struct mutex update_lock; /* protect register access */
|
|
bool extended; /* true if extended range supported */
|
|
bool valid;
|
|
unsigned long last_updated; /* In jiffies */
|
|
u16 orig_config; /* original configuration */
|
|
u16 config; /* current configuration */
|
|
u16 temp[t_num_temp];/* Temperatures */
|
|
};
|
|
|
|
#define JC42_TEMP_MIN_EXTENDED (-40000)
|
|
#define JC42_TEMP_MIN 0
|
|
#define JC42_TEMP_MAX 125000
|
|
|
|
static u16 jc42_temp_to_reg(long temp, bool extended)
|
|
{
|
|
int ntemp = clamp_val(temp,
|
|
extended ? JC42_TEMP_MIN_EXTENDED :
|
|
JC42_TEMP_MIN, JC42_TEMP_MAX);
|
|
|
|
/* convert from 0.001 to 0.0625 resolution */
|
|
return (ntemp * 2 / 125) & 0x1fff;
|
|
}
|
|
|
|
static int jc42_temp_from_reg(s16 reg)
|
|
{
|
|
reg = sign_extend32(reg, 12);
|
|
|
|
/* convert from 0.0625 to 0.001 resolution */
|
|
return reg * 125 / 2;
|
|
}
|
|
|
|
static struct jc42_data *jc42_update_device(struct device *dev)
|
|
{
|
|
struct jc42_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
struct jc42_data *ret = data;
|
|
int i, val;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
|
|
for (i = 0; i < t_num_temp; i++) {
|
|
val = i2c_smbus_read_word_swapped(client, temp_regs[i]);
|
|
if (val < 0) {
|
|
ret = ERR_PTR(val);
|
|
goto abort;
|
|
}
|
|
data->temp[i] = val;
|
|
}
|
|
data->last_updated = jiffies;
|
|
data->valid = true;
|
|
}
|
|
abort:
|
|
mutex_unlock(&data->update_lock);
|
|
return ret;
|
|
}
|
|
|
|
static int jc42_read(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long *val)
|
|
{
|
|
struct jc42_data *data = jc42_update_device(dev);
|
|
int temp, hyst;
|
|
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
*val = jc42_temp_from_reg(data->temp[t_input]);
|
|
return 0;
|
|
case hwmon_temp_min:
|
|
*val = jc42_temp_from_reg(data->temp[t_min]);
|
|
return 0;
|
|
case hwmon_temp_max:
|
|
*val = jc42_temp_from_reg(data->temp[t_max]);
|
|
return 0;
|
|
case hwmon_temp_crit:
|
|
*val = jc42_temp_from_reg(data->temp[t_crit]);
|
|
return 0;
|
|
case hwmon_temp_max_hyst:
|
|
temp = jc42_temp_from_reg(data->temp[t_max]);
|
|
hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK)
|
|
>> JC42_CFG_HYST_SHIFT];
|
|
*val = temp - hyst;
|
|
return 0;
|
|
case hwmon_temp_crit_hyst:
|
|
temp = jc42_temp_from_reg(data->temp[t_crit]);
|
|
hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK)
|
|
>> JC42_CFG_HYST_SHIFT];
|
|
*val = temp - hyst;
|
|
return 0;
|
|
case hwmon_temp_min_alarm:
|
|
*val = (data->temp[t_input] >> JC42_ALARM_MIN_BIT) & 1;
|
|
return 0;
|
|
case hwmon_temp_max_alarm:
|
|
*val = (data->temp[t_input] >> JC42_ALARM_MAX_BIT) & 1;
|
|
return 0;
|
|
case hwmon_temp_crit_alarm:
|
|
*val = (data->temp[t_input] >> JC42_ALARM_CRIT_BIT) & 1;
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long val)
|
|
{
|
|
struct jc42_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
int diff, hyst;
|
|
int ret;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
switch (attr) {
|
|
case hwmon_temp_min:
|
|
data->temp[t_min] = jc42_temp_to_reg(val, data->extended);
|
|
ret = i2c_smbus_write_word_swapped(client, temp_regs[t_min],
|
|
data->temp[t_min]);
|
|
break;
|
|
case hwmon_temp_max:
|
|
data->temp[t_max] = jc42_temp_to_reg(val, data->extended);
|
|
ret = i2c_smbus_write_word_swapped(client, temp_regs[t_max],
|
|
data->temp[t_max]);
|
|
break;
|
|
case hwmon_temp_crit:
|
|
data->temp[t_crit] = jc42_temp_to_reg(val, data->extended);
|
|
ret = i2c_smbus_write_word_swapped(client, temp_regs[t_crit],
|
|
data->temp[t_crit]);
|
|
break;
|
|
case hwmon_temp_crit_hyst:
|
|
/*
|
|
* JC42.4 compliant chips only support four hysteresis values.
|
|
* Pick best choice and go from there.
|
|
*/
|
|
val = clamp_val(val, (data->extended ? JC42_TEMP_MIN_EXTENDED
|
|
: JC42_TEMP_MIN) - 6000,
|
|
JC42_TEMP_MAX);
|
|
diff = jc42_temp_from_reg(data->temp[t_crit]) - val;
|
|
hyst = 0;
|
|
if (diff > 0) {
|
|
if (diff < 2250)
|
|
hyst = 1; /* 1.5 degrees C */
|
|
else if (diff < 4500)
|
|
hyst = 2; /* 3.0 degrees C */
|
|
else
|
|
hyst = 3; /* 6.0 degrees C */
|
|
}
|
|
data->config = (data->config & ~JC42_CFG_HYST_MASK) |
|
|
(hyst << JC42_CFG_HYST_SHIFT);
|
|
ret = i2c_smbus_write_word_swapped(data->client,
|
|
JC42_REG_CONFIG,
|
|
data->config);
|
|
break;
|
|
default:
|
|
ret = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static umode_t jc42_is_visible(const void *_data, enum hwmon_sensor_types type,
|
|
u32 attr, int channel)
|
|
{
|
|
const struct jc42_data *data = _data;
|
|
unsigned int config = data->config;
|
|
umode_t mode = 0444;
|
|
|
|
switch (attr) {
|
|
case hwmon_temp_min:
|
|
case hwmon_temp_max:
|
|
if (!(config & JC42_CFG_EVENT_LOCK))
|
|
mode |= 0200;
|
|
break;
|
|
case hwmon_temp_crit:
|
|
if (!(config & JC42_CFG_TCRIT_LOCK))
|
|
mode |= 0200;
|
|
break;
|
|
case hwmon_temp_crit_hyst:
|
|
if (!(config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK)))
|
|
mode |= 0200;
|
|
break;
|
|
case hwmon_temp_input:
|
|
case hwmon_temp_max_hyst:
|
|
case hwmon_temp_min_alarm:
|
|
case hwmon_temp_max_alarm:
|
|
case hwmon_temp_crit_alarm:
|
|
break;
|
|
default:
|
|
mode = 0;
|
|
break;
|
|
}
|
|
return mode;
|
|
}
|
|
|
|
/* Return 0 if detection is successful, -ENODEV otherwise */
|
|
static int jc42_detect(struct i2c_client *client, struct i2c_board_info *info)
|
|
{
|
|
struct i2c_adapter *adapter = client->adapter;
|
|
int i, config, cap, manid, devid;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
|
|
I2C_FUNC_SMBUS_WORD_DATA))
|
|
return -ENODEV;
|
|
|
|
cap = i2c_smbus_read_word_swapped(client, JC42_REG_CAP);
|
|
config = i2c_smbus_read_word_swapped(client, JC42_REG_CONFIG);
|
|
manid = i2c_smbus_read_word_swapped(client, JC42_REG_MANID);
|
|
devid = i2c_smbus_read_word_swapped(client, JC42_REG_DEVICEID);
|
|
|
|
if (cap < 0 || config < 0 || manid < 0 || devid < 0)
|
|
return -ENODEV;
|
|
|
|
if ((cap & 0xff00) || (config & 0xf800))
|
|
return -ENODEV;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(jc42_chips); i++) {
|
|
struct jc42_chips *chip = &jc42_chips[i];
|
|
if (manid == chip->manid &&
|
|
(devid & chip->devid_mask) == chip->devid) {
|
|
strlcpy(info->type, "jc42", I2C_NAME_SIZE);
|
|
return 0;
|
|
}
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
static const struct hwmon_channel_info *jc42_info[] = {
|
|
HWMON_CHANNEL_INFO(temp,
|
|
HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
|
|
HWMON_T_CRIT | HWMON_T_MAX_HYST |
|
|
HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM |
|
|
HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM),
|
|
NULL
|
|
};
|
|
|
|
static const struct hwmon_ops jc42_hwmon_ops = {
|
|
.is_visible = jc42_is_visible,
|
|
.read = jc42_read,
|
|
.write = jc42_write,
|
|
};
|
|
|
|
static const struct hwmon_chip_info jc42_chip_info = {
|
|
.ops = &jc42_hwmon_ops,
|
|
.info = jc42_info,
|
|
};
|
|
|
|
static int jc42_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct device *hwmon_dev;
|
|
struct jc42_data *data;
|
|
int config, cap;
|
|
|
|
data = devm_kzalloc(dev, sizeof(struct jc42_data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->client = client;
|
|
i2c_set_clientdata(client, data);
|
|
mutex_init(&data->update_lock);
|
|
|
|
cap = i2c_smbus_read_word_swapped(client, JC42_REG_CAP);
|
|
if (cap < 0)
|
|
return cap;
|
|
|
|
data->extended = !!(cap & JC42_CAP_RANGE);
|
|
|
|
if (device_property_read_bool(dev, "smbus-timeout-disable")) {
|
|
int smbus;
|
|
|
|
/*
|
|
* Not all chips support this register, but from a
|
|
* quick read of various datasheets no chip appears
|
|
* incompatible with the below attempt to disable
|
|
* the timeout. And the whole thing is opt-in...
|
|
*/
|
|
smbus = i2c_smbus_read_word_swapped(client, JC42_REG_SMBUS);
|
|
if (smbus < 0)
|
|
return smbus;
|
|
i2c_smbus_write_word_swapped(client, JC42_REG_SMBUS,
|
|
smbus | SMBUS_STMOUT);
|
|
}
|
|
|
|
config = i2c_smbus_read_word_swapped(client, JC42_REG_CONFIG);
|
|
if (config < 0)
|
|
return config;
|
|
|
|
data->orig_config = config;
|
|
if (config & JC42_CFG_SHUTDOWN) {
|
|
config &= ~JC42_CFG_SHUTDOWN;
|
|
i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config);
|
|
}
|
|
data->config = config;
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_info(dev, "jc42",
|
|
data, &jc42_chip_info,
|
|
NULL);
|
|
return PTR_ERR_OR_ZERO(hwmon_dev);
|
|
}
|
|
|
|
static int jc42_remove(struct i2c_client *client)
|
|
{
|
|
struct jc42_data *data = i2c_get_clientdata(client);
|
|
|
|
/* Restore original configuration except hysteresis */
|
|
if ((data->config & ~JC42_CFG_HYST_MASK) !=
|
|
(data->orig_config & ~JC42_CFG_HYST_MASK)) {
|
|
int config;
|
|
|
|
config = (data->orig_config & ~JC42_CFG_HYST_MASK)
|
|
| (data->config & JC42_CFG_HYST_MASK);
|
|
i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int jc42_suspend(struct device *dev)
|
|
{
|
|
struct jc42_data *data = dev_get_drvdata(dev);
|
|
|
|
data->config |= JC42_CFG_SHUTDOWN;
|
|
i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG,
|
|
data->config);
|
|
return 0;
|
|
}
|
|
|
|
static int jc42_resume(struct device *dev)
|
|
{
|
|
struct jc42_data *data = dev_get_drvdata(dev);
|
|
|
|
data->config &= ~JC42_CFG_SHUTDOWN;
|
|
i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG,
|
|
data->config);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops jc42_dev_pm_ops = {
|
|
.suspend = jc42_suspend,
|
|
.resume = jc42_resume,
|
|
};
|
|
|
|
#define JC42_DEV_PM_OPS (&jc42_dev_pm_ops)
|
|
#else
|
|
#define JC42_DEV_PM_OPS NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
static const struct i2c_device_id jc42_id[] = {
|
|
{ "jc42", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, jc42_id);
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id jc42_of_ids[] = {
|
|
{ .compatible = "jedec,jc-42.4-temp", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, jc42_of_ids);
|
|
#endif
|
|
|
|
static struct i2c_driver jc42_driver = {
|
|
.class = I2C_CLASS_SPD | I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "jc42",
|
|
.pm = JC42_DEV_PM_OPS,
|
|
.of_match_table = of_match_ptr(jc42_of_ids),
|
|
},
|
|
.probe_new = jc42_probe,
|
|
.remove = jc42_remove,
|
|
.id_table = jc42_id,
|
|
.detect = jc42_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
module_i2c_driver(jc42_driver);
|
|
|
|
MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
|
|
MODULE_DESCRIPTION("JC42 driver");
|
|
MODULE_LICENSE("GPL");
|