mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-26 13:44:15 +08:00
bfcb813203
It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
383 lines
9.4 KiB
C
383 lines
9.4 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Handling of a master device, switching frames via its switch fabric CPU port
|
|
*
|
|
* Copyright (c) 2017 Savoir-faire Linux Inc.
|
|
* Vivien Didelot <vivien.didelot@savoirfairelinux.com>
|
|
*/
|
|
|
|
#include "dsa_priv.h"
|
|
|
|
static int dsa_master_get_regs_len(struct net_device *dev)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
int port = cpu_dp->index;
|
|
int ret = 0;
|
|
int len;
|
|
|
|
if (ops->get_regs_len) {
|
|
len = ops->get_regs_len(dev);
|
|
if (len < 0)
|
|
return len;
|
|
ret += len;
|
|
}
|
|
|
|
ret += sizeof(struct ethtool_drvinfo);
|
|
ret += sizeof(struct ethtool_regs);
|
|
|
|
if (ds->ops->get_regs_len) {
|
|
len = ds->ops->get_regs_len(ds, port);
|
|
if (len < 0)
|
|
return len;
|
|
ret += len;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void dsa_master_get_regs(struct net_device *dev,
|
|
struct ethtool_regs *regs, void *data)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
struct ethtool_drvinfo *cpu_info;
|
|
struct ethtool_regs *cpu_regs;
|
|
int port = cpu_dp->index;
|
|
int len;
|
|
|
|
if (ops->get_regs_len && ops->get_regs) {
|
|
len = ops->get_regs_len(dev);
|
|
if (len < 0)
|
|
return;
|
|
regs->len = len;
|
|
ops->get_regs(dev, regs, data);
|
|
data += regs->len;
|
|
}
|
|
|
|
cpu_info = (struct ethtool_drvinfo *)data;
|
|
strlcpy(cpu_info->driver, "dsa", sizeof(cpu_info->driver));
|
|
data += sizeof(*cpu_info);
|
|
cpu_regs = (struct ethtool_regs *)data;
|
|
data += sizeof(*cpu_regs);
|
|
|
|
if (ds->ops->get_regs_len && ds->ops->get_regs) {
|
|
len = ds->ops->get_regs_len(ds, port);
|
|
if (len < 0)
|
|
return;
|
|
cpu_regs->len = len;
|
|
ds->ops->get_regs(ds, port, cpu_regs, data);
|
|
}
|
|
}
|
|
|
|
static void dsa_master_get_ethtool_stats(struct net_device *dev,
|
|
struct ethtool_stats *stats,
|
|
uint64_t *data)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
int port = cpu_dp->index;
|
|
int count = 0;
|
|
|
|
if (ops->get_sset_count && ops->get_ethtool_stats) {
|
|
count = ops->get_sset_count(dev, ETH_SS_STATS);
|
|
ops->get_ethtool_stats(dev, stats, data);
|
|
}
|
|
|
|
if (ds->ops->get_ethtool_stats)
|
|
ds->ops->get_ethtool_stats(ds, port, data + count);
|
|
}
|
|
|
|
static void dsa_master_get_ethtool_phy_stats(struct net_device *dev,
|
|
struct ethtool_stats *stats,
|
|
uint64_t *data)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
int port = cpu_dp->index;
|
|
int count = 0;
|
|
|
|
if (dev->phydev && !ops->get_ethtool_phy_stats) {
|
|
count = phy_ethtool_get_sset_count(dev->phydev);
|
|
if (count >= 0)
|
|
phy_ethtool_get_stats(dev->phydev, stats, data);
|
|
} else if (ops->get_sset_count && ops->get_ethtool_phy_stats) {
|
|
count = ops->get_sset_count(dev, ETH_SS_PHY_STATS);
|
|
ops->get_ethtool_phy_stats(dev, stats, data);
|
|
}
|
|
|
|
if (count < 0)
|
|
count = 0;
|
|
|
|
if (ds->ops->get_ethtool_phy_stats)
|
|
ds->ops->get_ethtool_phy_stats(ds, port, data + count);
|
|
}
|
|
|
|
static int dsa_master_get_sset_count(struct net_device *dev, int sset)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
int count = 0;
|
|
|
|
if (sset == ETH_SS_PHY_STATS && dev->phydev &&
|
|
!ops->get_ethtool_phy_stats)
|
|
count = phy_ethtool_get_sset_count(dev->phydev);
|
|
else if (ops->get_sset_count)
|
|
count = ops->get_sset_count(dev, sset);
|
|
|
|
if (count < 0)
|
|
count = 0;
|
|
|
|
if (ds->ops->get_sset_count)
|
|
count += ds->ops->get_sset_count(ds, cpu_dp->index, sset);
|
|
|
|
return count;
|
|
}
|
|
|
|
static void dsa_master_get_strings(struct net_device *dev, uint32_t stringset,
|
|
uint8_t *data)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
int port = cpu_dp->index;
|
|
int len = ETH_GSTRING_LEN;
|
|
int mcount = 0, count;
|
|
unsigned int i;
|
|
uint8_t pfx[4];
|
|
uint8_t *ndata;
|
|
|
|
snprintf(pfx, sizeof(pfx), "p%.2d", port);
|
|
/* We do not want to be NULL-terminated, since this is a prefix */
|
|
pfx[sizeof(pfx) - 1] = '_';
|
|
|
|
if (stringset == ETH_SS_PHY_STATS && dev->phydev &&
|
|
!ops->get_ethtool_phy_stats) {
|
|
mcount = phy_ethtool_get_sset_count(dev->phydev);
|
|
if (mcount < 0)
|
|
mcount = 0;
|
|
else
|
|
phy_ethtool_get_strings(dev->phydev, data);
|
|
} else if (ops->get_sset_count && ops->get_strings) {
|
|
mcount = ops->get_sset_count(dev, stringset);
|
|
if (mcount < 0)
|
|
mcount = 0;
|
|
ops->get_strings(dev, stringset, data);
|
|
}
|
|
|
|
if (ds->ops->get_strings) {
|
|
ndata = data + mcount * len;
|
|
/* This function copies ETH_GSTRINGS_LEN bytes, we will mangle
|
|
* the output after to prepend our CPU port prefix we
|
|
* constructed earlier
|
|
*/
|
|
ds->ops->get_strings(ds, port, stringset, ndata);
|
|
count = ds->ops->get_sset_count(ds, port, stringset);
|
|
for (i = 0; i < count; i++) {
|
|
memmove(ndata + (i * len + sizeof(pfx)),
|
|
ndata + i * len, len - sizeof(pfx));
|
|
memcpy(ndata + i * len, pfx, sizeof(pfx));
|
|
}
|
|
}
|
|
}
|
|
|
|
static int dsa_master_get_phys_port_name(struct net_device *dev,
|
|
char *name, size_t len)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
|
|
if (snprintf(name, len, "p%d", cpu_dp->index) >= len)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsa_master_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
struct dsa_switch_tree *dst;
|
|
int err = -EOPNOTSUPP;
|
|
struct dsa_port *dp;
|
|
|
|
dst = ds->dst;
|
|
|
|
switch (cmd) {
|
|
case SIOCGHWTSTAMP:
|
|
case SIOCSHWTSTAMP:
|
|
/* Deny PTP operations on master if there is at least one
|
|
* switch in the tree that is PTP capable.
|
|
*/
|
|
list_for_each_entry(dp, &dst->ports, list)
|
|
if (dp->ds->ops->port_hwtstamp_get ||
|
|
dp->ds->ops->port_hwtstamp_set)
|
|
return -EBUSY;
|
|
break;
|
|
}
|
|
|
|
if (cpu_dp->orig_ndo_ops && cpu_dp->orig_ndo_ops->ndo_do_ioctl)
|
|
err = cpu_dp->orig_ndo_ops->ndo_do_ioctl(dev, ifr, cmd);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int dsa_master_ethtool_setup(struct net_device *dev)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
struct ethtool_ops *ops;
|
|
|
|
ops = devm_kzalloc(ds->dev, sizeof(*ops), GFP_KERNEL);
|
|
if (!ops)
|
|
return -ENOMEM;
|
|
|
|
cpu_dp->orig_ethtool_ops = dev->ethtool_ops;
|
|
if (cpu_dp->orig_ethtool_ops)
|
|
memcpy(ops, cpu_dp->orig_ethtool_ops, sizeof(*ops));
|
|
|
|
ops->get_regs_len = dsa_master_get_regs_len;
|
|
ops->get_regs = dsa_master_get_regs;
|
|
ops->get_sset_count = dsa_master_get_sset_count;
|
|
ops->get_ethtool_stats = dsa_master_get_ethtool_stats;
|
|
ops->get_strings = dsa_master_get_strings;
|
|
ops->get_ethtool_phy_stats = dsa_master_get_ethtool_phy_stats;
|
|
|
|
dev->ethtool_ops = ops;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dsa_master_ethtool_teardown(struct net_device *dev)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
|
|
dev->ethtool_ops = cpu_dp->orig_ethtool_ops;
|
|
cpu_dp->orig_ethtool_ops = NULL;
|
|
}
|
|
|
|
static int dsa_master_ndo_setup(struct net_device *dev)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
struct net_device_ops *ops;
|
|
|
|
if (dev->netdev_ops->ndo_get_phys_port_name)
|
|
return 0;
|
|
|
|
ops = devm_kzalloc(ds->dev, sizeof(*ops), GFP_KERNEL);
|
|
if (!ops)
|
|
return -ENOMEM;
|
|
|
|
cpu_dp->orig_ndo_ops = dev->netdev_ops;
|
|
if (cpu_dp->orig_ndo_ops)
|
|
memcpy(ops, cpu_dp->orig_ndo_ops, sizeof(*ops));
|
|
|
|
ops->ndo_get_phys_port_name = dsa_master_get_phys_port_name;
|
|
ops->ndo_do_ioctl = dsa_master_ioctl;
|
|
|
|
dev->netdev_ops = ops;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dsa_master_ndo_teardown(struct net_device *dev)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
|
|
dev->netdev_ops = cpu_dp->orig_ndo_ops;
|
|
cpu_dp->orig_ndo_ops = NULL;
|
|
}
|
|
|
|
static ssize_t tagging_show(struct device *d, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct net_device *dev = to_net_dev(d);
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
|
|
return sprintf(buf, "%s\n",
|
|
dsa_tag_protocol_to_str(cpu_dp->tag_ops));
|
|
}
|
|
static DEVICE_ATTR_RO(tagging);
|
|
|
|
static struct attribute *dsa_slave_attrs[] = {
|
|
&dev_attr_tagging.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group dsa_group = {
|
|
.name = "dsa",
|
|
.attrs = dsa_slave_attrs,
|
|
};
|
|
|
|
static void dsa_master_reset_mtu(struct net_device *dev)
|
|
{
|
|
int err;
|
|
|
|
rtnl_lock();
|
|
err = dev_set_mtu(dev, ETH_DATA_LEN);
|
|
if (err)
|
|
netdev_dbg(dev,
|
|
"Unable to reset MTU to exclude DSA overheads\n");
|
|
rtnl_unlock();
|
|
}
|
|
|
|
int dsa_master_setup(struct net_device *dev, struct dsa_port *cpu_dp)
|
|
{
|
|
int ret;
|
|
|
|
rtnl_lock();
|
|
ret = dev_set_mtu(dev, ETH_DATA_LEN + cpu_dp->tag_ops->overhead);
|
|
rtnl_unlock();
|
|
if (ret)
|
|
netdev_warn(dev, "error %d setting MTU to include DSA overhead\n",
|
|
ret);
|
|
|
|
/* If we use a tagging format that doesn't have an ethertype
|
|
* field, make sure that all packets from this point on get
|
|
* sent to the tag format's receive function.
|
|
*/
|
|
wmb();
|
|
|
|
dev->dsa_ptr = cpu_dp;
|
|
ret = dsa_master_ethtool_setup(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = dsa_master_ndo_setup(dev);
|
|
if (ret)
|
|
goto out_err_ethtool_teardown;
|
|
|
|
ret = sysfs_create_group(&dev->dev.kobj, &dsa_group);
|
|
if (ret)
|
|
goto out_err_ndo_teardown;
|
|
|
|
return ret;
|
|
|
|
out_err_ndo_teardown:
|
|
dsa_master_ndo_teardown(dev);
|
|
out_err_ethtool_teardown:
|
|
dsa_master_ethtool_teardown(dev);
|
|
return ret;
|
|
}
|
|
|
|
void dsa_master_teardown(struct net_device *dev)
|
|
{
|
|
sysfs_remove_group(&dev->dev.kobj, &dsa_group);
|
|
dsa_master_ndo_teardown(dev);
|
|
dsa_master_ethtool_teardown(dev);
|
|
dsa_master_reset_mtu(dev);
|
|
|
|
dev->dsa_ptr = NULL;
|
|
|
|
/* If we used a tagging format that doesn't have an ethertype
|
|
* field, make sure that all packets from this point get sent
|
|
* without the tag and go through the regular receive path.
|
|
*/
|
|
wmb();
|
|
}
|