Bjørn Mork 6289d0facd qmi_wwan: add Olicard 600 ... This is a Qualcomm based device with a QMI function on interface 4. It is mode switched from 2020:2030 using a standard eject message. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2031 Rev= 2.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>		2019-03-28 16:58:06 -07:00
..
aqc111.c	net: usb: aqc111: Extend HWID table by QNAP device	2019-03-26 11:19:42 -07:00
aqc111.h	net: usb: aqc111: Add support for wake on LAN by MAGIC packet	2018-11-27 15:46:07 -08:00
asix_common.c	asix: Check for supported Wake-on-LAN modes	2018-09-29 11:31:29 -07:00
asix_devices.c	net: usb: asix: ax88772_bind return error when hw_reset fail	2019-01-24 22:33:11 -08:00
asix.h
ax88172a.c
ax88179_178a.c	ax88179_178a: Check for supported Wake-on-LAN modes	2018-09-29 11:31:29 -07:00
catc.c	net: usb: Mark expected switch fall-throughs	2018-06-30 20:47:16 +09:00
cdc_eem.c	net: cdc_eem: clean up bind error path	2018-03-07 15:39:27 -05:00
cdc_ether.c	net: usb: aqc111: Extend HWID table by QNAP device	2019-03-26 11:19:42 -07:00
cdc_mbim.c	net: usb: cdc_mbim: add flag FLAG_SEND_ZLP	2018-06-01 14:01:42 -04:00
cdc_ncm.c	net: cdc_ncm: remove set but not used variable 'ctx'	2018-10-12 09:45:36 -07:00
cdc_subset.c
cdc-phonet.c	net: usb: cdc-phonet: use struct_size() in alloc_netdev()	2019-02-08 22:57:27 -08:00
ch9200.c
cx82310_eth.c
dm9601.c
gl620a.c
hso.c	USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data	2018-12-12 15:41:10 -08:00
huawei_cdc_ncm.c
int51x1.c
ipheth.c	usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2	2018-11-27 14:57:16 -08:00
kalmia.c	net: kalmia: clean up bind error path	2018-03-07 15:39:27 -05:00
kaweth.c	net: usb: kaweth: use irqsave() in USB's complete callback	2018-06-22 13:57:45 +09:00
Kconfig	net: Don't default Aquantia USB driver to 'y'	2018-11-29 16:01:34 -08:00
lan78xx.c	net: phy: fixed-phy: Drop GPIO from fixed_phy_add()	2019-02-04 18:33:36 -08:00
lan78xx.h	net: lan78xx: Switch to SPDX identifier	2018-09-05 22:20:45 -07:00
lg-vl600.c	net: drivers/net: Remove unnecessary skb_copy_expand OOM messages	2018-03-15 14:28:03 -04:00
Makefile	net: usb: aqc111: Driver skeleton for Aquantia AQtion USB to 5GbE	2018-11-27 15:46:06 -08:00
mcs7830.c
net1080.c
pegasus.c	net: usb: pegasus: Mark expected switch fall-through	2019-02-08 11:54:06 -08:00
pegasus.h
plusb.c
qmi_wwan.c	qmi_wwan: add Olicard 600	2019-03-28 16:58:06 -07:00
r8152.c	r8152: Fix an error on RTL8153-BD MAC Address Passthrough support	2019-02-22 11:36:55 -08:00
rndis_host.c
rtl8150.c	net: usb: rtl8150: mark expected switch fall-through	2019-02-08 11:54:27 -08:00
sierra_net.c
smsc75xx.c	net/usb: cancel pending work when unbinding smsc75xx	2018-10-04 13:51:30 -07:00
smsc75xx.h
smsc95xx.c	usbnet: smsc95xx: check for csum being in last four bytes	2018-11-16 20:16:19 -08:00
smsc95xx.h
sr9700.c	drivers: net: Remove unnecessary semicolon	2019-03-01 23:13:49 -08:00
sr9700.h
sr9800.c	sr9800: Check for supported Wake-on-LAN modes	2018-09-29 11:31:29 -07:00
sr9800.h
usbnet.c	net: usbnet: make driver_info const	2018-10-02 22:22:46 -07:00
zaurus.c