mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-23 19:14:30 +08:00
9d52107185
The i.MX8MP glue layer has support for the following flags: * over-current polarity * PWR pad polarity * controlling PPC flag in HCCPARAMS register * permanent port attach for usb2 & usb3 port Allow setting these flags by supporting specific flags in the glue node. In order to get this to work an additional IORESOURCE_MEM and clock is necessary. For backward compatibility this is purely optional. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20220218152707.2198357-4-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
428 lines
11 KiB
C
428 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* dwc3-imx8mp.c - NXP imx8mp Specific Glue layer
|
|
*
|
|
* Copyright (c) 2020 NXP.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
|
|
#include "core.h"
|
|
|
|
/* USB wakeup registers */
|
|
#define USB_WAKEUP_CTRL 0x00
|
|
|
|
/* Global wakeup interrupt enable, also used to clear interrupt */
|
|
#define USB_WAKEUP_EN BIT(31)
|
|
/* Wakeup from connect or disconnect, only for superspeed */
|
|
#define USB_WAKEUP_SS_CONN BIT(5)
|
|
/* 0 select vbus_valid, 1 select sessvld */
|
|
#define USB_WAKEUP_VBUS_SRC_SESS_VAL BIT(4)
|
|
/* Enable signal for wake up from u3 state */
|
|
#define USB_WAKEUP_U3_EN BIT(3)
|
|
/* Enable signal for wake up from id change */
|
|
#define USB_WAKEUP_ID_EN BIT(2)
|
|
/* Enable signal for wake up from vbus change */
|
|
#define USB_WAKEUP_VBUS_EN BIT(1)
|
|
/* Enable signal for wake up from dp/dm change */
|
|
#define USB_WAKEUP_DPDM_EN BIT(0)
|
|
|
|
#define USB_WAKEUP_EN_MASK GENMASK(5, 0)
|
|
|
|
/* USB glue registers */
|
|
#define USB_CTRL0 0x00
|
|
#define USB_CTRL1 0x04
|
|
|
|
#define USB_CTRL0_PORTPWR_EN BIT(12) /* 1 - PPC enabled (default) */
|
|
#define USB_CTRL0_USB3_FIXED BIT(22) /* 1 - USB3 permanent attached */
|
|
#define USB_CTRL0_USB2_FIXED BIT(23) /* 1 - USB2 permanent attached */
|
|
|
|
#define USB_CTRL1_OC_POLARITY BIT(16) /* 0 - HIGH / 1 - LOW */
|
|
#define USB_CTRL1_PWR_POLARITY BIT(17) /* 0 - HIGH / 1 - LOW */
|
|
|
|
struct dwc3_imx8mp {
|
|
struct device *dev;
|
|
struct platform_device *dwc3;
|
|
void __iomem *hsio_blk_base;
|
|
void __iomem *glue_base;
|
|
struct clk *hsio_clk;
|
|
struct clk *suspend_clk;
|
|
int irq;
|
|
bool pm_suspended;
|
|
bool wakeup_pending;
|
|
};
|
|
|
|
static void imx8mp_configure_glue(struct dwc3_imx8mp *dwc3_imx)
|
|
{
|
|
struct device *dev = dwc3_imx->dev;
|
|
u32 value;
|
|
|
|
if (!dwc3_imx->glue_base)
|
|
return;
|
|
|
|
value = readl(dwc3_imx->glue_base + USB_CTRL0);
|
|
|
|
if (device_property_read_bool(dev, "fsl,permanently-attached"))
|
|
value |= (USB_CTRL0_USB2_FIXED | USB_CTRL0_USB3_FIXED);
|
|
else
|
|
value &= ~(USB_CTRL0_USB2_FIXED | USB_CTRL0_USB3_FIXED);
|
|
|
|
if (device_property_read_bool(dev, "fsl,disable-port-power-control"))
|
|
value &= ~(USB_CTRL0_PORTPWR_EN);
|
|
else
|
|
value |= USB_CTRL0_PORTPWR_EN;
|
|
|
|
writel(value, dwc3_imx->glue_base + USB_CTRL0);
|
|
|
|
value = readl(dwc3_imx->glue_base + USB_CTRL1);
|
|
if (device_property_read_bool(dev, "fsl,over-current-active-low"))
|
|
value |= USB_CTRL1_OC_POLARITY;
|
|
else
|
|
value &= ~USB_CTRL1_OC_POLARITY;
|
|
|
|
if (device_property_read_bool(dev, "fsl,power-active-low"))
|
|
value |= USB_CTRL1_PWR_POLARITY;
|
|
else
|
|
value &= ~USB_CTRL1_PWR_POLARITY;
|
|
|
|
writel(value, dwc3_imx->glue_base + USB_CTRL1);
|
|
}
|
|
|
|
static void dwc3_imx8mp_wakeup_enable(struct dwc3_imx8mp *dwc3_imx)
|
|
{
|
|
struct dwc3 *dwc3 = platform_get_drvdata(dwc3_imx->dwc3);
|
|
u32 val;
|
|
|
|
if (!dwc3)
|
|
return;
|
|
|
|
val = readl(dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL);
|
|
|
|
if ((dwc3->current_dr_role == DWC3_GCTL_PRTCAP_HOST) && dwc3->xhci)
|
|
val |= USB_WAKEUP_EN | USB_WAKEUP_SS_CONN |
|
|
USB_WAKEUP_U3_EN | USB_WAKEUP_DPDM_EN;
|
|
else if (dwc3->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE)
|
|
val |= USB_WAKEUP_EN | USB_WAKEUP_VBUS_EN |
|
|
USB_WAKEUP_VBUS_SRC_SESS_VAL;
|
|
|
|
writel(val, dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL);
|
|
}
|
|
|
|
static void dwc3_imx8mp_wakeup_disable(struct dwc3_imx8mp *dwc3_imx)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL);
|
|
val &= ~(USB_WAKEUP_EN | USB_WAKEUP_EN_MASK);
|
|
writel(val, dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL);
|
|
}
|
|
|
|
static irqreturn_t dwc3_imx8mp_interrupt(int irq, void *_dwc3_imx)
|
|
{
|
|
struct dwc3_imx8mp *dwc3_imx = _dwc3_imx;
|
|
struct dwc3 *dwc = platform_get_drvdata(dwc3_imx->dwc3);
|
|
|
|
if (!dwc3_imx->pm_suspended)
|
|
return IRQ_HANDLED;
|
|
|
|
disable_irq_nosync(dwc3_imx->irq);
|
|
dwc3_imx->wakeup_pending = true;
|
|
|
|
if ((dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) && dwc->xhci)
|
|
pm_runtime_resume(&dwc->xhci->dev);
|
|
else if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE)
|
|
pm_runtime_get(dwc->dev);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int dwc3_imx8mp_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *dwc3_np, *node = dev->of_node;
|
|
struct dwc3_imx8mp *dwc3_imx;
|
|
struct resource *res;
|
|
int err, irq;
|
|
|
|
if (!node) {
|
|
dev_err(dev, "device node not found\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dwc3_imx = devm_kzalloc(dev, sizeof(*dwc3_imx), GFP_KERNEL);
|
|
if (!dwc3_imx)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, dwc3_imx);
|
|
|
|
dwc3_imx->dev = dev;
|
|
|
|
dwc3_imx->hsio_blk_base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(dwc3_imx->hsio_blk_base))
|
|
return PTR_ERR(dwc3_imx->hsio_blk_base);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
if (!res) {
|
|
dev_warn(dev, "Base address for glue layer missing. Continuing without, some features are missing though.");
|
|
} else {
|
|
dwc3_imx->glue_base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(dwc3_imx->glue_base))
|
|
return PTR_ERR(dwc3_imx->glue_base);
|
|
}
|
|
|
|
dwc3_imx->hsio_clk = devm_clk_get(dev, "hsio");
|
|
if (IS_ERR(dwc3_imx->hsio_clk)) {
|
|
err = PTR_ERR(dwc3_imx->hsio_clk);
|
|
dev_err(dev, "Failed to get hsio clk, err=%d\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = clk_prepare_enable(dwc3_imx->hsio_clk);
|
|
if (err) {
|
|
dev_err(dev, "Failed to enable hsio clk, err=%d\n", err);
|
|
return err;
|
|
}
|
|
|
|
dwc3_imx->suspend_clk = devm_clk_get(dev, "suspend");
|
|
if (IS_ERR(dwc3_imx->suspend_clk)) {
|
|
err = PTR_ERR(dwc3_imx->suspend_clk);
|
|
dev_err(dev, "Failed to get suspend clk, err=%d\n", err);
|
|
goto disable_hsio_clk;
|
|
}
|
|
|
|
err = clk_prepare_enable(dwc3_imx->suspend_clk);
|
|
if (err) {
|
|
dev_err(dev, "Failed to enable suspend clk, err=%d\n", err);
|
|
goto disable_hsio_clk;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
err = irq;
|
|
goto disable_clks;
|
|
}
|
|
dwc3_imx->irq = irq;
|
|
|
|
imx8mp_configure_glue(dwc3_imx);
|
|
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_enable(dev);
|
|
err = pm_runtime_get_sync(dev);
|
|
if (err < 0)
|
|
goto disable_rpm;
|
|
|
|
dwc3_np = of_get_compatible_child(node, "snps,dwc3");
|
|
if (!dwc3_np) {
|
|
err = -ENODEV;
|
|
dev_err(dev, "failed to find dwc3 core child\n");
|
|
goto disable_rpm;
|
|
}
|
|
|
|
err = of_platform_populate(node, NULL, NULL, dev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to create dwc3 core\n");
|
|
goto err_node_put;
|
|
}
|
|
|
|
dwc3_imx->dwc3 = of_find_device_by_node(dwc3_np);
|
|
if (!dwc3_imx->dwc3) {
|
|
dev_err(dev, "failed to get dwc3 platform device\n");
|
|
err = -ENODEV;
|
|
goto depopulate;
|
|
}
|
|
of_node_put(dwc3_np);
|
|
|
|
err = devm_request_threaded_irq(dev, irq, NULL, dwc3_imx8mp_interrupt,
|
|
IRQF_ONESHOT, dev_name(dev), dwc3_imx);
|
|
if (err) {
|
|
dev_err(dev, "failed to request IRQ #%d --> %d\n", irq, err);
|
|
goto depopulate;
|
|
}
|
|
|
|
device_set_wakeup_capable(dev, true);
|
|
pm_runtime_put(dev);
|
|
|
|
return 0;
|
|
|
|
depopulate:
|
|
of_platform_depopulate(dev);
|
|
err_node_put:
|
|
of_node_put(dwc3_np);
|
|
disable_rpm:
|
|
pm_runtime_disable(dev);
|
|
pm_runtime_put_noidle(dev);
|
|
disable_clks:
|
|
clk_disable_unprepare(dwc3_imx->suspend_clk);
|
|
disable_hsio_clk:
|
|
clk_disable_unprepare(dwc3_imx->hsio_clk);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int dwc3_imx8mp_remove(struct platform_device *pdev)
|
|
{
|
|
struct dwc3_imx8mp *dwc3_imx = platform_get_drvdata(pdev);
|
|
struct device *dev = &pdev->dev;
|
|
|
|
pm_runtime_get_sync(dev);
|
|
of_platform_depopulate(dev);
|
|
|
|
clk_disable_unprepare(dwc3_imx->suspend_clk);
|
|
clk_disable_unprepare(dwc3_imx->hsio_clk);
|
|
|
|
pm_runtime_disable(dev);
|
|
pm_runtime_put_noidle(dev);
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused dwc3_imx8mp_suspend(struct dwc3_imx8mp *dwc3_imx,
|
|
pm_message_t msg)
|
|
{
|
|
if (dwc3_imx->pm_suspended)
|
|
return 0;
|
|
|
|
/* Wakeup enable */
|
|
if (PMSG_IS_AUTO(msg) || device_may_wakeup(dwc3_imx->dev))
|
|
dwc3_imx8mp_wakeup_enable(dwc3_imx);
|
|
|
|
dwc3_imx->pm_suspended = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused dwc3_imx8mp_resume(struct dwc3_imx8mp *dwc3_imx,
|
|
pm_message_t msg)
|
|
{
|
|
struct dwc3 *dwc = platform_get_drvdata(dwc3_imx->dwc3);
|
|
int ret = 0;
|
|
|
|
if (!dwc3_imx->pm_suspended)
|
|
return 0;
|
|
|
|
/* Wakeup disable */
|
|
dwc3_imx8mp_wakeup_disable(dwc3_imx);
|
|
dwc3_imx->pm_suspended = false;
|
|
|
|
/* Upon power loss any previous configuration is lost, restore it */
|
|
imx8mp_configure_glue(dwc3_imx);
|
|
|
|
if (dwc3_imx->wakeup_pending) {
|
|
dwc3_imx->wakeup_pending = false;
|
|
if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE) {
|
|
pm_runtime_mark_last_busy(dwc->dev);
|
|
pm_runtime_put_autosuspend(dwc->dev);
|
|
} else {
|
|
/*
|
|
* Add wait for xhci switch from suspend
|
|
* clock to normal clock to detect connection.
|
|
*/
|
|
usleep_range(9000, 10000);
|
|
}
|
|
enable_irq(dwc3_imx->irq);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __maybe_unused dwc3_imx8mp_pm_suspend(struct device *dev)
|
|
{
|
|
struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = dwc3_imx8mp_suspend(dwc3_imx, PMSG_SUSPEND);
|
|
|
|
if (device_may_wakeup(dwc3_imx->dev))
|
|
enable_irq_wake(dwc3_imx->irq);
|
|
else
|
|
clk_disable_unprepare(dwc3_imx->suspend_clk);
|
|
|
|
clk_disable_unprepare(dwc3_imx->hsio_clk);
|
|
dev_dbg(dev, "dwc3 imx8mp pm suspend.\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __maybe_unused dwc3_imx8mp_pm_resume(struct device *dev)
|
|
{
|
|
struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
if (device_may_wakeup(dwc3_imx->dev)) {
|
|
disable_irq_wake(dwc3_imx->irq);
|
|
} else {
|
|
ret = clk_prepare_enable(dwc3_imx->suspend_clk);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(dwc3_imx->hsio_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = dwc3_imx8mp_resume(dwc3_imx, PMSG_RESUME);
|
|
|
|
pm_runtime_disable(dev);
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_enable(dev);
|
|
|
|
dev_dbg(dev, "dwc3 imx8mp pm resume.\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __maybe_unused dwc3_imx8mp_runtime_suspend(struct device *dev)
|
|
{
|
|
struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(dev, "dwc3 imx8mp runtime suspend.\n");
|
|
|
|
return dwc3_imx8mp_suspend(dwc3_imx, PMSG_AUTO_SUSPEND);
|
|
}
|
|
|
|
static int __maybe_unused dwc3_imx8mp_runtime_resume(struct device *dev)
|
|
{
|
|
struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(dev, "dwc3 imx8mp runtime resume.\n");
|
|
|
|
return dwc3_imx8mp_resume(dwc3_imx, PMSG_AUTO_RESUME);
|
|
}
|
|
|
|
static const struct dev_pm_ops dwc3_imx8mp_dev_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(dwc3_imx8mp_pm_suspend, dwc3_imx8mp_pm_resume)
|
|
SET_RUNTIME_PM_OPS(dwc3_imx8mp_runtime_suspend,
|
|
dwc3_imx8mp_runtime_resume, NULL)
|
|
};
|
|
|
|
static const struct of_device_id dwc3_imx8mp_of_match[] = {
|
|
{ .compatible = "fsl,imx8mp-dwc3", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, dwc3_imx8mp_of_match);
|
|
|
|
static struct platform_driver dwc3_imx8mp_driver = {
|
|
.probe = dwc3_imx8mp_probe,
|
|
.remove = dwc3_imx8mp_remove,
|
|
.driver = {
|
|
.name = "imx8mp-dwc3",
|
|
.pm = &dwc3_imx8mp_dev_pm_ops,
|
|
.of_match_table = dwc3_imx8mp_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(dwc3_imx8mp_driver);
|
|
|
|
MODULE_ALIAS("platform:imx8mp-dwc3");
|
|
MODULE_AUTHOR("jun.li@nxp.com");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("DesignWare USB3 imx8mp Glue Layer");
|