0
0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-24 03:24:55 +08:00
linux/drivers/thunderbolt/nhi_regs.h
Mario Limonciello c4af8e3fec thunderbolt: Clear registers properly when auto clear isn't in use
When `QUIRK_AUTO_CLEAR_INT` isn't set, interrupt masking should be
cleared by writing to Interrupt Mask Clear (IMR) and interrupt
status should be cleared properly at shutdown/init.

This fixes an error where interrupts are left enabled during resume
from hibernation with `CONFIG_USB4=y`.

Fixes: 468c49f447 ("thunderbolt: Disable interrupt auto clear for rings")
Cc: stable@vger.kernel.org # v6.3
Reported-by: Takashi Iwai <tiwai@suse.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217343
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-05-09 09:39:03 +03:00

169 lines
4.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Thunderbolt driver - NHI registers
*
* Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com>
* Copyright (C) 2018, Intel Corporation
*/
#ifndef NHI_REGS_H_
#define NHI_REGS_H_
#include <linux/types.h>
enum ring_flags {
RING_FLAG_ISOCH_ENABLE = 1 << 27, /* TX only? */
RING_FLAG_E2E_FLOW_CONTROL = 1 << 28,
RING_FLAG_PCI_NO_SNOOP = 1 << 29,
RING_FLAG_RAW = 1 << 30, /* ignore EOF/SOF mask, include checksum */
RING_FLAG_ENABLE = 1 << 31,
};
/**
* struct ring_desc - TX/RX ring entry
*
* For TX set length/eof/sof.
* For RX length/eof/sof are set by the NHI.
*/
struct ring_desc {
u64 phys;
u32 length:12;
u32 eof:4;
u32 sof:4;
enum ring_desc_flags flags:12;
u32 time; /* write zero */
} __packed;
/* NHI registers in bar 0 */
/*
* 16 bytes per entry, one entry for every hop (REG_HOP_COUNT)
* 00: physical pointer to an array of struct ring_desc
* 08: ring tail (set by NHI)
* 10: ring head (index of first non posted descriptor)
* 12: descriptor count
*/
#define REG_TX_RING_BASE 0x00000
/*
* 16 bytes per entry, one entry for every hop (REG_HOP_COUNT)
* 00: physical pointer to an array of struct ring_desc
* 08: ring head (index of first not posted descriptor)
* 10: ring tail (set by NHI)
* 12: descriptor count
* 14: max frame sizes (anything larger than 0x100 has no effect)
*/
#define REG_RX_RING_BASE 0x08000
/*
* 32 bytes per entry, one entry for every hop (REG_HOP_COUNT)
* 00: enum_ring_flags
* 04: isoch time stamp ?? (write 0)
* ..: unknown
*/
#define REG_TX_OPTIONS_BASE 0x19800
/*
* 32 bytes per entry, one entry for every hop (REG_HOP_COUNT)
* 00: enum ring_flags
* If RING_FLAG_E2E_FLOW_CONTROL is set then bits 13-23 must be set to
* the corresponding TX hop id.
* 04: EOF/SOF mask (ignored for RING_FLAG_RAW rings)
* ..: unknown
*/
#define REG_RX_OPTIONS_BASE 0x29800
#define REG_RX_OPTIONS_E2E_HOP_MASK GENMASK(22, 12)
#define REG_RX_OPTIONS_E2E_HOP_SHIFT 12
/*
* three bitfields: tx, rx, rx overflow
* Every bitfield contains one bit for every hop (REG_HOP_COUNT).
* New interrupts are fired only after ALL registers have been
* read (even those containing only disabled rings).
*/
#define REG_RING_NOTIFY_BASE 0x37800
#define RING_NOTIFY_REG_COUNT(nhi) ((31 + 3 * nhi->hop_count) / 32)
#define REG_RING_INT_CLEAR 0x37808
/*
* two bitfields: rx, tx
* Both bitfields contains one bit for every hop (REG_HOP_COUNT). To
* enable/disable interrupts set/clear the corresponding bits.
*/
#define REG_RING_INTERRUPT_BASE 0x38200
#define RING_INTERRUPT_REG_COUNT(nhi) ((31 + 2 * nhi->hop_count) / 32)
#define REG_RING_INTERRUPT_MASK_CLEAR_BASE 0x38208
#define REG_INT_THROTTLING_RATE 0x38c00
/* Interrupt Vector Allocation */
#define REG_INT_VEC_ALLOC_BASE 0x38c40
#define REG_INT_VEC_ALLOC_BITS 4
#define REG_INT_VEC_ALLOC_MASK GENMASK(3, 0)
#define REG_INT_VEC_ALLOC_REGS (32 / REG_INT_VEC_ALLOC_BITS)
/* The last 11 bits contain the number of hops supported by the NHI port. */
#define REG_HOP_COUNT 0x39640
#define REG_DMA_MISC 0x39864
#define REG_DMA_MISC_INT_AUTO_CLEAR BIT(2)
#define REG_DMA_MISC_DISABLE_AUTO_CLEAR BIT(17)
#define REG_INMAIL_DATA 0x39900
#define REG_INMAIL_CMD 0x39904
#define REG_INMAIL_CMD_MASK GENMASK(7, 0)
#define REG_INMAIL_ERROR BIT(30)
#define REG_INMAIL_OP_REQUEST BIT(31)
#define REG_OUTMAIL_CMD 0x3990c
#define REG_OUTMAIL_CMD_OPMODE_SHIFT 8
#define REG_OUTMAIL_CMD_OPMODE_MASK GENMASK(11, 8)
#define REG_FW_STS 0x39944
#define REG_FW_STS_NVM_AUTH_DONE BIT(31)
#define REG_FW_STS_CIO_RESET_REQ BIT(30)
#define REG_FW_STS_ICM_EN_CPU BIT(2)
#define REG_FW_STS_ICM_EN_INVERT BIT(1)
#define REG_FW_STS_ICM_EN BIT(0)
/* ICL NHI VSEC registers */
/* FW ready */
#define VS_CAP_9 0xc8
#define VS_CAP_9_FW_READY BIT(31)
/* UUID */
#define VS_CAP_10 0xcc
#define VS_CAP_11 0xd0
/* LTR */
#define VS_CAP_15 0xe0
#define VS_CAP_16 0xe4
/* TBT2PCIe */
#define VS_CAP_18 0xec
#define VS_CAP_18_DONE BIT(0)
/* PCIe2TBT */
#define VS_CAP_19 0xf0
#define VS_CAP_19_VALID BIT(0)
#define VS_CAP_19_CMD_SHIFT 1
#define VS_CAP_19_CMD_MASK GENMASK(7, 1)
/* Force power */
#define VS_CAP_22 0xfc
#define VS_CAP_22_FORCE_POWER BIT(1)
#define VS_CAP_22_DMA_DELAY_MASK GENMASK(31, 24)
#define VS_CAP_22_DMA_DELAY_SHIFT 24
/**
* enum icl_lc_mailbox_cmd - ICL specific LC mailbox commands
* @ICL_LC_GO2SX: Ask LC to enter Sx without wake
* @ICL_LC_GO2SX_NO_WAKE: Ask LC to enter Sx with wake
* @ICL_LC_PREPARE_FOR_RESET: Prepare LC for reset
*/
enum icl_lc_mailbox_cmd {
ICL_LC_GO2SX = 0x02,
ICL_LC_GO2SX_NO_WAKE = 0x03,
ICL_LC_PREPARE_FOR_RESET = 0x21,
};
#endif