linux/drivers/usb/chipidea/ci_hdrc_msm.c
Stephen Boyd 47654a1620 usb: chipidea: msm: Restore wrapper settings after reset
When the RESET bit is set in the USBCMD register it resets quite
a few of the wrapper's registers to their reset state. This
includes the GENCONFIG and GENCONFIG2 registers. Currently this
is done by the usb phy and ehci-msm drivers writing into the
controller wrapper's MMIO address space. Let's consolidate the
register writes into the wrapper driver instead so that we
clearly split the wrapper from the phys.

Acked-by: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20 15:26:39 +08:00

279 lines
6.7 KiB
C

/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/usb/chipidea.h>
#include <linux/clk.h>
#include <linux/reset.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include <linux/io.h>
#include <linux/extcon.h>
#include <linux/of.h>
#include "ci.h"
#define HS_PHY_AHB_MODE 0x0098
#define HS_PHY_GENCONFIG 0x009c
#define HS_PHY_TXFIFO_IDLE_FORCE_DIS BIT(4)
#define HS_PHY_GENCONFIG_2 0x00a0
#define HS_PHY_SESS_VLD_CTRL_EN BIT(7)
#define HS_PHY_ULPI_TX_PKT_EN_CLR_FIX BIT(19)
#define HSPHY_SESS_VLD_CTRL BIT(25)
/* Vendor base starts at 0x200 beyond CI base */
#define HS_PHY_SEC_CTRL 0x0078
#define HS_PHY_DIG_CLAMP_N BIT(16)
struct ci_hdrc_msm {
struct platform_device *ci;
struct clk *core_clk;
struct clk *iface_clk;
struct clk *fs_clk;
bool secondary_phy;
bool hsic;
void __iomem *base;
};
static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
{
struct device *dev = ci->dev->parent;
struct ci_hdrc_msm *msm_ci = dev_get_drvdata(dev);
switch (event) {
case CI_HDRC_CONTROLLER_RESET_EVENT:
dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
if (msm_ci->secondary_phy) {
u32 val = readl_relaxed(msm_ci->base + HS_PHY_SEC_CTRL);
val |= HS_PHY_DIG_CLAMP_N;
writel_relaxed(val, msm_ci->base + HS_PHY_SEC_CTRL);
}
/* use AHB transactor, allow posted data writes */
hw_write_id_reg(ci, HS_PHY_AHB_MODE, 0xffffffff, 0x8);
/* workaround for rx buffer collision issue */
hw_write_id_reg(ci, HS_PHY_GENCONFIG,
HS_PHY_TXFIFO_IDLE_FORCE_DIS, 0);
if (!msm_ci->hsic)
hw_write_id_reg(ci, HS_PHY_GENCONFIG_2,
HS_PHY_ULPI_TX_PKT_EN_CLR_FIX, 0);
if (!IS_ERR(ci->platdata->vbus_extcon.edev)) {
hw_write_id_reg(ci, HS_PHY_GENCONFIG_2,
HS_PHY_SESS_VLD_CTRL_EN,
HS_PHY_SESS_VLD_CTRL_EN);
hw_write(ci, OP_USBCMD, HSPHY_SESS_VLD_CTRL,
HSPHY_SESS_VLD_CTRL);
}
usb_phy_init(ci->usb_phy);
break;
case CI_HDRC_CONTROLLER_STOPPED_EVENT:
dev_dbg(dev, "CI_HDRC_CONTROLLER_STOPPED_EVENT received\n");
/*
* Put the phy in non-driving mode. Otherwise host
* may not detect soft-disconnection.
*/
usb_phy_notify_disconnect(ci->usb_phy, USB_SPEED_UNKNOWN);
break;
default:
dev_dbg(dev, "unknown ci_hdrc event\n");
break;
}
}
static struct ci_hdrc_platform_data ci_hdrc_msm_platdata = {
.name = "ci_hdrc_msm",
.capoffset = DEF_CAPOFFSET,
.flags = CI_HDRC_REGS_SHARED |
CI_HDRC_DISABLE_STREAMING |
CI_HDRC_OVERRIDE_AHB_BURST,
.notify_event = ci_hdrc_msm_notify_event,
};
static int ci_hdrc_msm_mux_phy(struct ci_hdrc_msm *ci,
struct platform_device *pdev)
{
struct regmap *regmap;
struct device *dev = &pdev->dev;
struct of_phandle_args args;
u32 val;
int ret;
ret = of_parse_phandle_with_fixed_args(dev->of_node, "phy-select", 2, 0,
&args);
if (ret)
return 0;
regmap = syscon_node_to_regmap(args.np);
of_node_put(args.np);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
ret = regmap_write(regmap, args.args[0], args.args[1]);
if (ret)
return ret;
ci->secondary_phy = !!args.args[1];
if (ci->secondary_phy) {
val = readl_relaxed(ci->base + HS_PHY_SEC_CTRL);
val |= HS_PHY_DIG_CLAMP_N;
writel_relaxed(val, ci->base + HS_PHY_SEC_CTRL);
}
return 0;
}
static int ci_hdrc_msm_probe(struct platform_device *pdev)
{
struct ci_hdrc_msm *ci;
struct platform_device *plat_ci;
struct usb_phy *phy;
struct clk *clk;
struct reset_control *reset;
struct resource *res;
int ret;
struct device_node *ulpi_node, *phy_node;
dev_dbg(&pdev->dev, "ci_hdrc_msm_probe\n");
ci = devm_kzalloc(&pdev->dev, sizeof(*ci), GFP_KERNEL);
if (!ci)
return -ENOMEM;
platform_set_drvdata(pdev, ci);
/*
* OTG(PHY) driver takes care of PHY initialization, clock management,
* powering up VBUS, mapping of registers address space and power
* management.
*/
phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
if (IS_ERR(phy))
return PTR_ERR(phy);
ci_hdrc_msm_platdata.usb_phy = phy;
reset = devm_reset_control_get(&pdev->dev, "core");
if (IS_ERR(reset))
return PTR_ERR(reset);
ci->core_clk = clk = devm_clk_get(&pdev->dev, "core");
if (IS_ERR(clk))
return PTR_ERR(clk);
ci->iface_clk = clk = devm_clk_get(&pdev->dev, "iface");
if (IS_ERR(clk))
return PTR_ERR(clk);
ci->fs_clk = clk = devm_clk_get(&pdev->dev, "fs");
if (IS_ERR(clk)) {
if (PTR_ERR(clk) == -EPROBE_DEFER)
return -EPROBE_DEFER;
ci->fs_clk = NULL;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
ci->base = devm_ioremap_resource(&pdev->dev, res);
if (!ci->base)
return -ENOMEM;
ret = clk_prepare_enable(ci->fs_clk);
if (ret)
return ret;
reset_control_assert(reset);
usleep_range(10000, 12000);
reset_control_deassert(reset);
clk_disable_unprepare(ci->fs_clk);
ret = clk_prepare_enable(ci->core_clk);
if (ret)
return ret;
ret = clk_prepare_enable(ci->iface_clk);
if (ret)
goto err_iface;
ret = ci_hdrc_msm_mux_phy(ci, pdev);
if (ret)
goto err_mux;
ulpi_node = of_find_node_by_name(pdev->dev.of_node, "ulpi");
if (ulpi_node) {
phy_node = of_get_next_available_child(ulpi_node, NULL);
ci->hsic = of_device_is_compatible(phy_node, "qcom,usb-hsic-phy");
of_node_put(phy_node);
}
of_node_put(ulpi_node);
plat_ci = ci_hdrc_add_device(&pdev->dev,
pdev->resource, pdev->num_resources,
&ci_hdrc_msm_platdata);
if (IS_ERR(plat_ci)) {
dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
ret = PTR_ERR(plat_ci);
goto err_mux;
}
ci->ci = plat_ci;
pm_runtime_set_active(&pdev->dev);
pm_runtime_no_callbacks(&pdev->dev);
pm_runtime_enable(&pdev->dev);
return 0;
err_mux:
clk_disable_unprepare(ci->iface_clk);
err_iface:
clk_disable_unprepare(ci->core_clk);
return ret;
}
static int ci_hdrc_msm_remove(struct platform_device *pdev)
{
struct ci_hdrc_msm *ci = platform_get_drvdata(pdev);
pm_runtime_disable(&pdev->dev);
ci_hdrc_remove_device(ci->ci);
clk_disable_unprepare(ci->iface_clk);
clk_disable_unprepare(ci->core_clk);
return 0;
}
static const struct of_device_id msm_ci_dt_match[] = {
{ .compatible = "qcom,ci-hdrc", },
{ }
};
MODULE_DEVICE_TABLE(of, msm_ci_dt_match);
static struct platform_driver ci_hdrc_msm_driver = {
.probe = ci_hdrc_msm_probe,
.remove = ci_hdrc_msm_remove,
.driver = {
.name = "msm_hsusb",
.of_match_table = msm_ci_dt_match,
},
};
module_platform_driver(ci_hdrc_msm_driver);
MODULE_ALIAS("platform:msm_hsusb");
MODULE_ALIAS("platform:ci13xxx_msm");
MODULE_LICENSE("GPL v2");