mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 23:14:31 +08:00
867cae44f8
On some MAX 10 cards, the BMC firmware is not available to service handshake registers during secure update erase and write phases at normal speeds. This problem affects at least hwmon driver. When the MAX 10 hwmon driver tries to read the sensor values during a secure update, the reads are slowed down (e.g., reading all D5005 sensors takes ~24s which is magnitudes worse than the normal <0.02s). Manage access to the handshake registers using a rw semaphore and a FW state variable to prevent accesses during those secure update phases and return -EBUSY instead. If handshake_sys_reg_nranges == 0, don't update bwcfw_state as it is not used. This avoids the locking cost. Co-developed-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Co-developed-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230417092653.16487-5-ilpo.jarvinen@linux.intel.com
776 lines
20 KiB
C
776 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Intel MAX10 Board Management Controller Secure Update Driver
|
|
*
|
|
* Copyright (C) 2019-2022 Intel Corporation. All rights reserved.
|
|
*
|
|
*/
|
|
#include <linux/bitfield.h>
|
|
#include <linux/device.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/mfd/intel-m10-bmc.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
struct m10bmc_sec;
|
|
|
|
struct m10bmc_sec_ops {
|
|
int (*rsu_status)(struct m10bmc_sec *sec);
|
|
};
|
|
|
|
struct m10bmc_sec {
|
|
struct device *dev;
|
|
struct intel_m10bmc *m10bmc;
|
|
struct fw_upload *fwl;
|
|
char *fw_name;
|
|
u32 fw_name_id;
|
|
bool cancel_request;
|
|
const struct m10bmc_sec_ops *ops;
|
|
};
|
|
|
|
static DEFINE_XARRAY_ALLOC(fw_upload_xa);
|
|
|
|
/* Root Entry Hash (REH) support */
|
|
#define REH_SHA256_SIZE 32
|
|
#define REH_SHA384_SIZE 48
|
|
#define REH_MAGIC GENMASK(15, 0)
|
|
#define REH_SHA_NUM_BYTES GENMASK(31, 16)
|
|
|
|
static int m10bmc_sec_write(struct m10bmc_sec *sec, const u8 *buf, u32 offset, u32 size)
|
|
{
|
|
struct intel_m10bmc *m10bmc = sec->m10bmc;
|
|
unsigned int stride = regmap_get_reg_stride(m10bmc->regmap);
|
|
u32 write_count = size / stride;
|
|
u32 leftover_offset = write_count * stride;
|
|
u32 leftover_size = size - leftover_offset;
|
|
u32 leftover_tmp = 0;
|
|
int ret;
|
|
|
|
if (sec->m10bmc->flash_bulk_ops)
|
|
return sec->m10bmc->flash_bulk_ops->write(m10bmc, buf, offset, size);
|
|
|
|
if (WARN_ON_ONCE(stride > sizeof(leftover_tmp)))
|
|
return -EINVAL;
|
|
|
|
ret = regmap_bulk_write(m10bmc->regmap, M10BMC_STAGING_BASE + offset,
|
|
buf + offset, write_count);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* If size is not aligned to stride, handle the remainder bytes with regmap_write() */
|
|
if (leftover_size) {
|
|
memcpy(&leftover_tmp, buf + leftover_offset, leftover_size);
|
|
ret = regmap_write(m10bmc->regmap, M10BMC_STAGING_BASE + offset + leftover_offset,
|
|
leftover_tmp);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int m10bmc_sec_read(struct m10bmc_sec *sec, u8 *buf, u32 addr, u32 size)
|
|
{
|
|
struct intel_m10bmc *m10bmc = sec->m10bmc;
|
|
unsigned int stride = regmap_get_reg_stride(m10bmc->regmap);
|
|
u32 read_count = size / stride;
|
|
u32 leftover_offset = read_count * stride;
|
|
u32 leftover_size = size - leftover_offset;
|
|
u32 leftover_tmp;
|
|
int ret;
|
|
|
|
if (sec->m10bmc->flash_bulk_ops)
|
|
return sec->m10bmc->flash_bulk_ops->read(m10bmc, buf, addr, size);
|
|
|
|
if (WARN_ON_ONCE(stride > sizeof(leftover_tmp)))
|
|
return -EINVAL;
|
|
|
|
ret = regmap_bulk_read(m10bmc->regmap, addr, buf, read_count);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* If size is not aligned to stride, handle the remainder bytes with regmap_read() */
|
|
if (leftover_size) {
|
|
ret = regmap_read(m10bmc->regmap, addr + leftover_offset, &leftover_tmp);
|
|
if (ret)
|
|
return ret;
|
|
memcpy(buf + leftover_offset, &leftover_tmp, leftover_size);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static ssize_t
|
|
show_root_entry_hash(struct device *dev, u32 exp_magic,
|
|
u32 prog_addr, u32 reh_addr, char *buf)
|
|
{
|
|
struct m10bmc_sec *sec = dev_get_drvdata(dev);
|
|
int sha_num_bytes, i, ret, cnt = 0;
|
|
u8 hash[REH_SHA384_SIZE];
|
|
u32 magic;
|
|
|
|
ret = m10bmc_sec_read(sec, (u8 *)&magic, prog_addr, sizeof(magic));
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (FIELD_GET(REH_MAGIC, magic) != exp_magic)
|
|
return sysfs_emit(buf, "hash not programmed\n");
|
|
|
|
sha_num_bytes = FIELD_GET(REH_SHA_NUM_BYTES, magic) / 8;
|
|
if (sha_num_bytes != REH_SHA256_SIZE &&
|
|
sha_num_bytes != REH_SHA384_SIZE) {
|
|
dev_err(sec->dev, "%s bad sha num bytes %d\n", __func__,
|
|
sha_num_bytes);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = m10bmc_sec_read(sec, hash, reh_addr, sha_num_bytes);
|
|
if (ret) {
|
|
dev_err(dev, "failed to read root entry hash\n");
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < sha_num_bytes; i++)
|
|
cnt += sprintf(buf + cnt, "%02x", hash[i]);
|
|
cnt += sprintf(buf + cnt, "\n");
|
|
|
|
return cnt;
|
|
}
|
|
|
|
#define DEVICE_ATTR_SEC_REH_RO(_name) \
|
|
static ssize_t _name##_root_entry_hash_show(struct device *dev, \
|
|
struct device_attribute *attr, \
|
|
char *buf) \
|
|
{ \
|
|
struct m10bmc_sec *sec = dev_get_drvdata(dev); \
|
|
const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map; \
|
|
\
|
|
return show_root_entry_hash(dev, csr_map->_name##_magic, \
|
|
csr_map->_name##_prog_addr, \
|
|
csr_map->_name##_reh_addr, \
|
|
buf); \
|
|
} \
|
|
static DEVICE_ATTR_RO(_name##_root_entry_hash)
|
|
|
|
DEVICE_ATTR_SEC_REH_RO(bmc);
|
|
DEVICE_ATTR_SEC_REH_RO(sr);
|
|
DEVICE_ATTR_SEC_REH_RO(pr);
|
|
|
|
#define CSK_BIT_LEN 128U
|
|
#define CSK_32ARRAY_SIZE DIV_ROUND_UP(CSK_BIT_LEN, 32)
|
|
|
|
static ssize_t
|
|
show_canceled_csk(struct device *dev, u32 addr, char *buf)
|
|
{
|
|
unsigned int i, size = CSK_32ARRAY_SIZE * sizeof(u32);
|
|
struct m10bmc_sec *sec = dev_get_drvdata(dev);
|
|
DECLARE_BITMAP(csk_map, CSK_BIT_LEN);
|
|
__le32 csk_le32[CSK_32ARRAY_SIZE];
|
|
u32 csk32[CSK_32ARRAY_SIZE];
|
|
int ret;
|
|
|
|
ret = m10bmc_sec_read(sec, (u8 *)&csk_le32, addr, size);
|
|
if (ret) {
|
|
dev_err(sec->dev, "failed to read CSK vector\n");
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < CSK_32ARRAY_SIZE; i++)
|
|
csk32[i] = le32_to_cpu(((csk_le32[i])));
|
|
|
|
bitmap_from_arr32(csk_map, csk32, CSK_BIT_LEN);
|
|
bitmap_complement(csk_map, csk_map, CSK_BIT_LEN);
|
|
return bitmap_print_to_pagebuf(1, buf, csk_map, CSK_BIT_LEN);
|
|
}
|
|
|
|
#define DEVICE_ATTR_SEC_CSK_RO(_name) \
|
|
static ssize_t _name##_canceled_csks_show(struct device *dev, \
|
|
struct device_attribute *attr, \
|
|
char *buf) \
|
|
{ \
|
|
struct m10bmc_sec *sec = dev_get_drvdata(dev); \
|
|
const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map; \
|
|
\
|
|
return show_canceled_csk(dev, \
|
|
csr_map->_name##_prog_addr + CSK_VEC_OFFSET, \
|
|
buf); \
|
|
} \
|
|
static DEVICE_ATTR_RO(_name##_canceled_csks)
|
|
|
|
#define CSK_VEC_OFFSET 0x34
|
|
|
|
DEVICE_ATTR_SEC_CSK_RO(bmc);
|
|
DEVICE_ATTR_SEC_CSK_RO(sr);
|
|
DEVICE_ATTR_SEC_CSK_RO(pr);
|
|
|
|
#define FLASH_COUNT_SIZE 4096 /* count stored as inverted bit vector */
|
|
|
|
static ssize_t flash_count_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct m10bmc_sec *sec = dev_get_drvdata(dev);
|
|
const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
|
|
unsigned int num_bits;
|
|
u8 *flash_buf;
|
|
int cnt, ret;
|
|
|
|
num_bits = FLASH_COUNT_SIZE * 8;
|
|
|
|
flash_buf = kmalloc(FLASH_COUNT_SIZE, GFP_KERNEL);
|
|
if (!flash_buf)
|
|
return -ENOMEM;
|
|
|
|
ret = m10bmc_sec_read(sec, flash_buf, csr_map->rsu_update_counter,
|
|
FLASH_COUNT_SIZE);
|
|
if (ret) {
|
|
dev_err(sec->dev, "failed to read flash count\n");
|
|
goto exit_free;
|
|
}
|
|
cnt = num_bits - bitmap_weight((unsigned long *)flash_buf, num_bits);
|
|
|
|
exit_free:
|
|
kfree(flash_buf);
|
|
|
|
return ret ? : sysfs_emit(buf, "%u\n", cnt);
|
|
}
|
|
static DEVICE_ATTR_RO(flash_count);
|
|
|
|
static struct attribute *m10bmc_security_attrs[] = {
|
|
&dev_attr_flash_count.attr,
|
|
&dev_attr_bmc_root_entry_hash.attr,
|
|
&dev_attr_sr_root_entry_hash.attr,
|
|
&dev_attr_pr_root_entry_hash.attr,
|
|
&dev_attr_sr_canceled_csks.attr,
|
|
&dev_attr_pr_canceled_csks.attr,
|
|
&dev_attr_bmc_canceled_csks.attr,
|
|
NULL,
|
|
};
|
|
|
|
static struct attribute_group m10bmc_security_attr_group = {
|
|
.name = "security",
|
|
.attrs = m10bmc_security_attrs,
|
|
};
|
|
|
|
static const struct attribute_group *m10bmc_sec_attr_groups[] = {
|
|
&m10bmc_security_attr_group,
|
|
NULL,
|
|
};
|
|
|
|
static void log_error_regs(struct m10bmc_sec *sec, u32 doorbell)
|
|
{
|
|
const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
|
|
u32 auth_result;
|
|
|
|
dev_err(sec->dev, "Doorbell: 0x%08x\n", doorbell);
|
|
|
|
if (!m10bmc_sys_read(sec->m10bmc, csr_map->auth_result, &auth_result))
|
|
dev_err(sec->dev, "RSU auth result: 0x%08x\n", auth_result);
|
|
}
|
|
|
|
static int m10bmc_sec_n3000_rsu_status(struct m10bmc_sec *sec)
|
|
{
|
|
const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
|
|
u32 doorbell;
|
|
int ret;
|
|
|
|
ret = m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, &doorbell);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return FIELD_GET(DRBL_RSU_STATUS, doorbell);
|
|
}
|
|
|
|
static int m10bmc_sec_n6000_rsu_status(struct m10bmc_sec *sec)
|
|
{
|
|
const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
|
|
u32 auth_result;
|
|
int ret;
|
|
|
|
ret = m10bmc_sys_read(sec->m10bmc, csr_map->auth_result, &auth_result);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return FIELD_GET(AUTH_RESULT_RSU_STATUS, auth_result);
|
|
}
|
|
|
|
static bool rsu_status_ok(u32 status)
|
|
{
|
|
return (status == RSU_STAT_NORMAL ||
|
|
status == RSU_STAT_NIOS_OK ||
|
|
status == RSU_STAT_USER_OK ||
|
|
status == RSU_STAT_FACTORY_OK);
|
|
}
|
|
|
|
static bool rsu_progress_done(u32 progress)
|
|
{
|
|
return (progress == RSU_PROG_IDLE ||
|
|
progress == RSU_PROG_RSU_DONE);
|
|
}
|
|
|
|
static bool rsu_progress_busy(u32 progress)
|
|
{
|
|
return (progress == RSU_PROG_AUTHENTICATING ||
|
|
progress == RSU_PROG_COPYING ||
|
|
progress == RSU_PROG_UPDATE_CANCEL ||
|
|
progress == RSU_PROG_PROGRAM_KEY_HASH);
|
|
}
|
|
|
|
static int m10bmc_sec_progress_status(struct m10bmc_sec *sec, u32 *doorbell_reg,
|
|
u32 *progress, u32 *status)
|
|
{
|
|
const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
|
|
int ret;
|
|
|
|
ret = m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, doorbell_reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = sec->ops->rsu_status(sec);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*status = ret;
|
|
*progress = rsu_prog(*doorbell_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static enum fw_upload_err rsu_check_idle(struct m10bmc_sec *sec)
|
|
{
|
|
const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
|
|
u32 doorbell;
|
|
int ret;
|
|
|
|
ret = m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, &doorbell);
|
|
if (ret)
|
|
return FW_UPLOAD_ERR_RW_ERROR;
|
|
|
|
if (!rsu_progress_done(rsu_prog(doorbell))) {
|
|
log_error_regs(sec, doorbell);
|
|
return FW_UPLOAD_ERR_BUSY;
|
|
}
|
|
|
|
return FW_UPLOAD_ERR_NONE;
|
|
}
|
|
|
|
static inline bool rsu_start_done(u32 doorbell_reg, u32 progress, u32 status)
|
|
{
|
|
if (doorbell_reg & DRBL_RSU_REQUEST)
|
|
return false;
|
|
|
|
if (status == RSU_STAT_ERASE_FAIL || status == RSU_STAT_WEAROUT)
|
|
return true;
|
|
|
|
if (!rsu_progress_done(progress))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static enum fw_upload_err rsu_update_init(struct m10bmc_sec *sec)
|
|
{
|
|
const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
|
|
u32 doorbell_reg, progress, status;
|
|
int ret, err;
|
|
|
|
ret = m10bmc_sys_update_bits(sec->m10bmc, csr_map->doorbell,
|
|
DRBL_RSU_REQUEST | DRBL_HOST_STATUS,
|
|
DRBL_RSU_REQUEST |
|
|
FIELD_PREP(DRBL_HOST_STATUS,
|
|
HOST_STATUS_IDLE));
|
|
if (ret)
|
|
return FW_UPLOAD_ERR_RW_ERROR;
|
|
|
|
ret = read_poll_timeout(m10bmc_sec_progress_status, err,
|
|
err < 0 || rsu_start_done(doorbell_reg, progress, status),
|
|
NIOS_HANDSHAKE_INTERVAL_US,
|
|
NIOS_HANDSHAKE_TIMEOUT_US,
|
|
false,
|
|
sec, &doorbell_reg, &progress, &status);
|
|
|
|
if (ret == -ETIMEDOUT) {
|
|
log_error_regs(sec, doorbell_reg);
|
|
return FW_UPLOAD_ERR_TIMEOUT;
|
|
} else if (err) {
|
|
return FW_UPLOAD_ERR_RW_ERROR;
|
|
}
|
|
|
|
if (status == RSU_STAT_WEAROUT) {
|
|
dev_warn(sec->dev, "Excessive flash update count detected\n");
|
|
return FW_UPLOAD_ERR_WEAROUT;
|
|
} else if (status == RSU_STAT_ERASE_FAIL) {
|
|
log_error_regs(sec, doorbell_reg);
|
|
return FW_UPLOAD_ERR_HW_ERROR;
|
|
}
|
|
|
|
return FW_UPLOAD_ERR_NONE;
|
|
}
|
|
|
|
static enum fw_upload_err rsu_prog_ready(struct m10bmc_sec *sec)
|
|
{
|
|
const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
|
|
unsigned long poll_timeout;
|
|
u32 doorbell, progress;
|
|
int ret;
|
|
|
|
ret = m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, &doorbell);
|
|
if (ret)
|
|
return FW_UPLOAD_ERR_RW_ERROR;
|
|
|
|
poll_timeout = jiffies + msecs_to_jiffies(RSU_PREP_TIMEOUT_MS);
|
|
while (rsu_prog(doorbell) == RSU_PROG_PREPARE) {
|
|
msleep(RSU_PREP_INTERVAL_MS);
|
|
if (time_after(jiffies, poll_timeout))
|
|
break;
|
|
|
|
ret = m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, &doorbell);
|
|
if (ret)
|
|
return FW_UPLOAD_ERR_RW_ERROR;
|
|
}
|
|
|
|
progress = rsu_prog(doorbell);
|
|
if (progress == RSU_PROG_PREPARE) {
|
|
log_error_regs(sec, doorbell);
|
|
return FW_UPLOAD_ERR_TIMEOUT;
|
|
} else if (progress != RSU_PROG_READY) {
|
|
log_error_regs(sec, doorbell);
|
|
return FW_UPLOAD_ERR_HW_ERROR;
|
|
}
|
|
|
|
return FW_UPLOAD_ERR_NONE;
|
|
}
|
|
|
|
static enum fw_upload_err rsu_send_data(struct m10bmc_sec *sec)
|
|
{
|
|
const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
|
|
u32 doorbell_reg, status;
|
|
int ret;
|
|
|
|
ret = m10bmc_sys_update_bits(sec->m10bmc, csr_map->doorbell,
|
|
DRBL_HOST_STATUS,
|
|
FIELD_PREP(DRBL_HOST_STATUS,
|
|
HOST_STATUS_WRITE_DONE));
|
|
if (ret)
|
|
return FW_UPLOAD_ERR_RW_ERROR;
|
|
|
|
ret = regmap_read_poll_timeout(sec->m10bmc->regmap,
|
|
csr_map->base + csr_map->doorbell,
|
|
doorbell_reg,
|
|
rsu_prog(doorbell_reg) != RSU_PROG_READY,
|
|
NIOS_HANDSHAKE_INTERVAL_US,
|
|
NIOS_HANDSHAKE_TIMEOUT_US);
|
|
|
|
if (ret == -ETIMEDOUT) {
|
|
log_error_regs(sec, doorbell_reg);
|
|
return FW_UPLOAD_ERR_TIMEOUT;
|
|
} else if (ret) {
|
|
return FW_UPLOAD_ERR_RW_ERROR;
|
|
}
|
|
|
|
ret = sec->ops->rsu_status(sec);
|
|
if (ret < 0)
|
|
return FW_UPLOAD_ERR_HW_ERROR;
|
|
status = ret;
|
|
|
|
if (!rsu_status_ok(status)) {
|
|
log_error_regs(sec, doorbell_reg);
|
|
return FW_UPLOAD_ERR_HW_ERROR;
|
|
}
|
|
|
|
return FW_UPLOAD_ERR_NONE;
|
|
}
|
|
|
|
static int rsu_check_complete(struct m10bmc_sec *sec, u32 *doorbell_reg)
|
|
{
|
|
u32 progress, status;
|
|
|
|
if (m10bmc_sec_progress_status(sec, doorbell_reg, &progress, &status))
|
|
return -EIO;
|
|
|
|
if (!rsu_status_ok(status))
|
|
return -EINVAL;
|
|
|
|
if (rsu_progress_done(progress))
|
|
return 0;
|
|
|
|
if (rsu_progress_busy(progress))
|
|
return -EAGAIN;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static enum fw_upload_err rsu_cancel(struct m10bmc_sec *sec)
|
|
{
|
|
const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
|
|
u32 doorbell;
|
|
int ret;
|
|
|
|
ret = m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, &doorbell);
|
|
if (ret)
|
|
return FW_UPLOAD_ERR_RW_ERROR;
|
|
|
|
if (rsu_prog(doorbell) != RSU_PROG_READY)
|
|
return FW_UPLOAD_ERR_BUSY;
|
|
|
|
ret = m10bmc_sys_update_bits(sec->m10bmc, csr_map->doorbell,
|
|
DRBL_HOST_STATUS,
|
|
FIELD_PREP(DRBL_HOST_STATUS,
|
|
HOST_STATUS_ABORT_RSU));
|
|
if (ret)
|
|
return FW_UPLOAD_ERR_RW_ERROR;
|
|
|
|
return FW_UPLOAD_ERR_CANCELED;
|
|
}
|
|
|
|
static enum fw_upload_err m10bmc_sec_prepare(struct fw_upload *fwl,
|
|
const u8 *data, u32 size)
|
|
{
|
|
struct m10bmc_sec *sec = fwl->dd_handle;
|
|
u32 ret;
|
|
|
|
sec->cancel_request = false;
|
|
|
|
if (!size || size > M10BMC_STAGING_SIZE)
|
|
return FW_UPLOAD_ERR_INVALID_SIZE;
|
|
|
|
if (sec->m10bmc->flash_bulk_ops)
|
|
if (sec->m10bmc->flash_bulk_ops->lock_write(sec->m10bmc))
|
|
return FW_UPLOAD_ERR_BUSY;
|
|
|
|
ret = rsu_check_idle(sec);
|
|
if (ret != FW_UPLOAD_ERR_NONE)
|
|
goto unlock_flash;
|
|
|
|
m10bmc_fw_state_set(sec->m10bmc, M10BMC_FW_STATE_SEC_UPDATE_PREPARE);
|
|
|
|
ret = rsu_update_init(sec);
|
|
if (ret != FW_UPLOAD_ERR_NONE)
|
|
goto fw_state_exit;
|
|
|
|
ret = rsu_prog_ready(sec);
|
|
if (ret != FW_UPLOAD_ERR_NONE)
|
|
goto fw_state_exit;
|
|
|
|
if (sec->cancel_request) {
|
|
ret = rsu_cancel(sec);
|
|
goto fw_state_exit;
|
|
}
|
|
|
|
m10bmc_fw_state_set(sec->m10bmc, M10BMC_FW_STATE_SEC_UPDATE_WRITE);
|
|
|
|
return FW_UPLOAD_ERR_NONE;
|
|
|
|
fw_state_exit:
|
|
m10bmc_fw_state_set(sec->m10bmc, M10BMC_FW_STATE_NORMAL);
|
|
|
|
unlock_flash:
|
|
if (sec->m10bmc->flash_bulk_ops)
|
|
sec->m10bmc->flash_bulk_ops->unlock_write(sec->m10bmc);
|
|
return ret;
|
|
}
|
|
|
|
#define WRITE_BLOCK_SIZE 0x4000 /* Default write-block size is 0x4000 bytes */
|
|
|
|
static enum fw_upload_err m10bmc_sec_fw_write(struct fw_upload *fwl, const u8 *data,
|
|
u32 offset, u32 size, u32 *written)
|
|
{
|
|
struct m10bmc_sec *sec = fwl->dd_handle;
|
|
const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
|
|
struct intel_m10bmc *m10bmc = sec->m10bmc;
|
|
u32 blk_size, doorbell;
|
|
int ret;
|
|
|
|
if (sec->cancel_request)
|
|
return rsu_cancel(sec);
|
|
|
|
ret = m10bmc_sys_read(m10bmc, csr_map->doorbell, &doorbell);
|
|
if (ret) {
|
|
return FW_UPLOAD_ERR_RW_ERROR;
|
|
} else if (rsu_prog(doorbell) != RSU_PROG_READY) {
|
|
log_error_regs(sec, doorbell);
|
|
return FW_UPLOAD_ERR_HW_ERROR;
|
|
}
|
|
|
|
WARN_ON_ONCE(WRITE_BLOCK_SIZE % regmap_get_reg_stride(m10bmc->regmap));
|
|
blk_size = min_t(u32, WRITE_BLOCK_SIZE, size);
|
|
ret = m10bmc_sec_write(sec, data, offset, blk_size);
|
|
if (ret)
|
|
return FW_UPLOAD_ERR_RW_ERROR;
|
|
|
|
*written = blk_size;
|
|
return FW_UPLOAD_ERR_NONE;
|
|
}
|
|
|
|
static enum fw_upload_err m10bmc_sec_poll_complete(struct fw_upload *fwl)
|
|
{
|
|
struct m10bmc_sec *sec = fwl->dd_handle;
|
|
unsigned long poll_timeout;
|
|
u32 doorbell, result;
|
|
int ret;
|
|
|
|
if (sec->cancel_request)
|
|
return rsu_cancel(sec);
|
|
|
|
m10bmc_fw_state_set(sec->m10bmc, M10BMC_FW_STATE_SEC_UPDATE_PROGRAM);
|
|
|
|
result = rsu_send_data(sec);
|
|
if (result != FW_UPLOAD_ERR_NONE)
|
|
return result;
|
|
|
|
poll_timeout = jiffies + msecs_to_jiffies(RSU_COMPLETE_TIMEOUT_MS);
|
|
do {
|
|
msleep(RSU_COMPLETE_INTERVAL_MS);
|
|
ret = rsu_check_complete(sec, &doorbell);
|
|
} while (ret == -EAGAIN && !time_after(jiffies, poll_timeout));
|
|
|
|
if (ret == -EAGAIN) {
|
|
log_error_regs(sec, doorbell);
|
|
return FW_UPLOAD_ERR_TIMEOUT;
|
|
} else if (ret == -EIO) {
|
|
return FW_UPLOAD_ERR_RW_ERROR;
|
|
} else if (ret) {
|
|
log_error_regs(sec, doorbell);
|
|
return FW_UPLOAD_ERR_HW_ERROR;
|
|
}
|
|
|
|
return FW_UPLOAD_ERR_NONE;
|
|
}
|
|
|
|
/*
|
|
* m10bmc_sec_cancel() may be called asynchronously with an on-going update.
|
|
* All other functions are called sequentially in a single thread. To avoid
|
|
* contention on register accesses, m10bmc_sec_cancel() must only update
|
|
* the cancel_request flag. Other functions will check this flag and handle
|
|
* the cancel request synchronously.
|
|
*/
|
|
static void m10bmc_sec_cancel(struct fw_upload *fwl)
|
|
{
|
|
struct m10bmc_sec *sec = fwl->dd_handle;
|
|
|
|
sec->cancel_request = true;
|
|
}
|
|
|
|
static void m10bmc_sec_cleanup(struct fw_upload *fwl)
|
|
{
|
|
struct m10bmc_sec *sec = fwl->dd_handle;
|
|
|
|
(void)rsu_cancel(sec);
|
|
|
|
m10bmc_fw_state_set(sec->m10bmc, M10BMC_FW_STATE_NORMAL);
|
|
|
|
if (sec->m10bmc->flash_bulk_ops)
|
|
sec->m10bmc->flash_bulk_ops->unlock_write(sec->m10bmc);
|
|
}
|
|
|
|
static const struct fw_upload_ops m10bmc_ops = {
|
|
.prepare = m10bmc_sec_prepare,
|
|
.write = m10bmc_sec_fw_write,
|
|
.poll_complete = m10bmc_sec_poll_complete,
|
|
.cancel = m10bmc_sec_cancel,
|
|
.cleanup = m10bmc_sec_cleanup,
|
|
};
|
|
|
|
static const struct m10bmc_sec_ops m10sec_n3000_ops = {
|
|
.rsu_status = m10bmc_sec_n3000_rsu_status,
|
|
};
|
|
|
|
static const struct m10bmc_sec_ops m10sec_n6000_ops = {
|
|
.rsu_status = m10bmc_sec_n6000_rsu_status,
|
|
};
|
|
|
|
#define SEC_UPDATE_LEN_MAX 32
|
|
static int m10bmc_sec_probe(struct platform_device *pdev)
|
|
{
|
|
char buf[SEC_UPDATE_LEN_MAX];
|
|
struct m10bmc_sec *sec;
|
|
struct fw_upload *fwl;
|
|
unsigned int len;
|
|
int ret;
|
|
|
|
sec = devm_kzalloc(&pdev->dev, sizeof(*sec), GFP_KERNEL);
|
|
if (!sec)
|
|
return -ENOMEM;
|
|
|
|
sec->dev = &pdev->dev;
|
|
sec->m10bmc = dev_get_drvdata(pdev->dev.parent);
|
|
sec->ops = (struct m10bmc_sec_ops *)platform_get_device_id(pdev)->driver_data;
|
|
dev_set_drvdata(&pdev->dev, sec);
|
|
|
|
ret = xa_alloc(&fw_upload_xa, &sec->fw_name_id, sec,
|
|
xa_limit_32b, GFP_KERNEL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
len = scnprintf(buf, SEC_UPDATE_LEN_MAX, "secure-update%d",
|
|
sec->fw_name_id);
|
|
sec->fw_name = kmemdup_nul(buf, len, GFP_KERNEL);
|
|
if (!sec->fw_name) {
|
|
ret = -ENOMEM;
|
|
goto fw_name_fail;
|
|
}
|
|
|
|
fwl = firmware_upload_register(THIS_MODULE, sec->dev, sec->fw_name,
|
|
&m10bmc_ops, sec);
|
|
if (IS_ERR(fwl)) {
|
|
dev_err(sec->dev, "Firmware Upload driver failed to start\n");
|
|
ret = PTR_ERR(fwl);
|
|
goto fw_uploader_fail;
|
|
}
|
|
|
|
sec->fwl = fwl;
|
|
return 0;
|
|
|
|
fw_uploader_fail:
|
|
kfree(sec->fw_name);
|
|
fw_name_fail:
|
|
xa_erase(&fw_upload_xa, sec->fw_name_id);
|
|
return ret;
|
|
}
|
|
|
|
static int m10bmc_sec_remove(struct platform_device *pdev)
|
|
{
|
|
struct m10bmc_sec *sec = dev_get_drvdata(&pdev->dev);
|
|
|
|
firmware_upload_unregister(sec->fwl);
|
|
kfree(sec->fw_name);
|
|
xa_erase(&fw_upload_xa, sec->fw_name_id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct platform_device_id intel_m10bmc_sec_ids[] = {
|
|
{
|
|
.name = "n3000bmc-sec-update",
|
|
.driver_data = (kernel_ulong_t)&m10sec_n3000_ops,
|
|
},
|
|
{
|
|
.name = "d5005bmc-sec-update",
|
|
.driver_data = (kernel_ulong_t)&m10sec_n3000_ops,
|
|
},
|
|
{
|
|
.name = "n6000bmc-sec-update",
|
|
.driver_data = (kernel_ulong_t)&m10sec_n6000_ops,
|
|
},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, intel_m10bmc_sec_ids);
|
|
|
|
static struct platform_driver intel_m10bmc_sec_driver = {
|
|
.probe = m10bmc_sec_probe,
|
|
.remove = m10bmc_sec_remove,
|
|
.driver = {
|
|
.name = "intel-m10bmc-sec-update",
|
|
.dev_groups = m10bmc_sec_attr_groups,
|
|
},
|
|
.id_table = intel_m10bmc_sec_ids,
|
|
};
|
|
module_platform_driver(intel_m10bmc_sec_driver);
|
|
|
|
MODULE_AUTHOR("Intel Corporation");
|
|
MODULE_DESCRIPTION("Intel MAX10 BMC Secure Update");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_IMPORT_NS(INTEL_M10_BMC_CORE);
|