korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-05 10:04:12 +08:00
Code Issues Packages Projects Releases Wiki Activity
474dad54ba
linux/arch/arm
History
David Brownell 474dad54ba davinci: gpio bugfixes 
Update the DaVinci GPIO code to work better on non-dm6446 parts,
notably the dm355:

 - Only handle the number of GPIOs the chip actually has.  So
   for example on dm6467, GPIO-42 is the last GPIO, and trying
   to use GPIO-43 now fails cleanly; or GPIO-72 on dm6446.

 - Enable GPIO interrupts on each 16-bit GPIO-irq bank ...
   previously, only the first five were enabled, so GPIO-80
   and above (on dm355) wouldn't trigger IRQs.

 - Use the right IRQ for each GPIO bank.  The wrong values were
   used for dm355 chips, so GPIO IRQs got routed incorrectly.

 - Handle up to four pairs of 16-bit GPIO banks ... previously
   only three were handled, so accessing GPIO-96 and up (e.g. on
   dm355) would oops.

 - Update several comments that were dm6446-specific.

Verified by receiving GPIO-1 (dm9000) and GPIO-5 (msp430) IRQs
on the DM355 EVM.

One thing this doesn't do is handle the way some of the GPIO
numbers on dm6467 are reserved but aren't valid as GPIOs.  Some
bitmap logic could fix that if needed.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-27 09:49:43 -07:00
..
boot arm: allow usage of string functions in linux/string.h 2009-03-31 13:05:36 +10:30
common [ARM] 5455/1: Fix IRQ noise from VIC code 2009-04-16 21:29:46 +01:00
configs davinci: add default Kconfig, add HAVE_IDE 2009-04-23 09:27:57 -07:00
include/asm [ARM] 5450/1: Flush only the needed range when unmapping a VMA 2009-04-15 10:01:02 +01:00
kernel Separate out common fstatat code into vfs_fstatat 2009-04-20 23:02:51 -04:00
lib Merge branch 'clps7500' into devel 2008-11-27 12:39:43 +00:00
mach-aaec2000 [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-at91 clocksource: pass clocksource to read() callback 2009-04-21 13:41:47 -07:00
mach-clps711x [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-davinci davinci: gpio bugfixes 2009-04-27 09:49:43 -07:00
mach-ebsa110 [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-ep93xx [ARM] 5451/1: ep93xx:core.c: build warning fix 2009-04-15 10:01:03 +01:00
mach-footbridge [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-gemini [ARM] arch_reset() now takes a second parameter 2009-03-30 10:40:12 +01:00
mach-h720x [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-imx clocksource: pass clocksource to read() callback 2009-04-21 13:41:47 -07:00
mach-integrator [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-iop13xx dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) 2009-04-07 08:31:10 -07:00
mach-iop32x [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-iop33x [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-ixp4xx clocksource: pass clocksource to read() callback 2009-04-21 13:41:47 -07:00
mach-ixp23xx [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-ixp2000 [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-kirkwood dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) 2009-04-07 08:31:11 -07:00
mach-ks8695 Merge branch 'highmem' into devel 2009-03-24 22:47:45 +00:00
mach-l7200 [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-lh7a40x [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-loki [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-mmp [ARM] arch_reset() now takes a second parameter 2009-03-30 10:40:12 +01:00
mach-msm clocksource: pass clocksource to read() callback 2009-04-21 13:41:47 -07:00
mach-mv78xx0 Merge branch 'master' of git://git.marvell.com/orion into devel 2009-03-19 23:10:40 +00:00
mach-mx1 MX1ADS: remove I2C ifdefs 2009-04-16 12:57:15 +02:00
mach-mx2 imx21: activate i2c 2009-04-16 12:57:13 +02:00
mach-mx3 mx31ads: Mark as having full regulatoion constraints with 1133-EV1 board 2009-04-16 13:03:56 +02:00
mach-netx clocksource: pass clocksource to read() callback 2009-04-21 13:41:47 -07:00
mach-ns9xxx clocksource: pass clocksource to read() callback 2009-04-21 13:41:47 -07:00
mach-omap1 clocksource: pass clocksource to read() callback 2009-04-21 13:41:47 -07:00
mach-omap2 clocksource: pass clocksource to read() callback 2009-04-21 13:41:47 -07:00
mach-orion5x dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) 2009-04-07 08:31:11 -07:00
mach-pnx4008 [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-pxa clocksource: pass clocksource to read() callback 2009-04-21 13:41:47 -07:00
mach-realview clocksource: pass clocksource to read() callback 2009-04-21 13:41:47 -07:00
mach-rpc [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-s3c24a0/include/mach [ARM] S3C: Make IRQ_EINT sleep control common 2009-03-08 12:35:36 +00:00
mach-s3c2400 [ARM] remove a common set of __virt_to_bus definitions 2008-11-28 15:36:49 +00:00
mach-s3c2410 i2c-s3c2410: Simplify bus frequency calculation 2009-04-07 10:18:33 +01:00
mach-s3c2412 [ARM] JIVE: Fix sparse warnings about items which should be static 2009-04-17 12:42:24 +01:00
mach-s3c2440 [ARM] Osiris: Fix double initialisation in machine block 2009-04-17 12:42:24 +01:00
mach-s3c2442 [ARM] Arrange for platforms to select appropriate CPU support 2008-11-27 12:38:00 +00:00
mach-s3c2443 S3C24XX: Move and update IIS headers 2009-03-05 12:00:59 +00:00
mach-s3c6400 Merge branch 'next-s3c64xx-regs' of git://aeryn.fluff.org.uk/bjdooks/linux into devel 2009-03-26 22:46:22 +00:00
mach-s3c6410 [ARM] SMDK6410: Request GPIOs for LCD power control 2009-04-15 14:46:03 +01:00
mach-sa1100 [ARM] collie: fix two minor formatting nits 2009-03-25 10:15:00 +00:00
mach-shark [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-versatile clocksource: pass clocksource to read() callback 2009-04-21 13:41:47 -07:00
mach-w90x900 [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mm [ARM] pxa: Add support for suspend on PalmTX, T5 and LD 2009-04-04 10:26:34 +08:00
nwfpe [ARM] Convert asm/uaccess.h to linux/uaccess.h 2008-09-06 11:35:55 +01:00
oprofile Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm 2009-03-28 14:03:14 -07:00
plat-iop dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) 2009-04-07 08:31:11 -07:00
plat-mxc clocksource: pass clocksource to read() callback 2009-04-21 13:41:47 -07:00
plat-omap clocksource: pass clocksource to read() callback 2009-04-21 13:41:47 -07:00
plat-orion clocksource: pass clocksource to read() callback 2009-04-21 13:41:47 -07:00
plat-pxa [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined 2009-03-26 21:30:11 +08:00
plat-s3c [ARM] S3C: Fix sparse warning from missing 's3c_device_hwmon' 2009-04-17 12:42:24 +01:00
plat-s3c24xx [ARM] S3C24XX: ADC: Check pending queue before freeing adc client 2009-04-17 12:46:36 +01:00
plat-s3c64xx [ARM] S3C64XX: add AHB_CON and SPCON register address definitions 2009-03-10 16:33:42 +00:00
tools [ARM] update mach-types 2009-03-23 16:12:37 -04:00
vfp [ARM] 5440/1: Fix VFP state corruption due to preemption during VFP exceptions 2009-04-01 22:17:50 +01:00
Kconfig davinci: major rework of clock, PLL, PSC infrastructure 2009-04-23 09:31:00 -07:00
Kconfig-nommu [ARM] 4532/1: allow configuration of processor ID 2007-10-12 23:43:02 +01:00
Kconfig.debug [ARM] 5412/1: XSCALE: add ice dcc support 2009-02-27 20:57:46 +00:00
Makefile Merge branch 'for-rmk' of git://gitorious.org/linux-gemini/mainline into devel 2009-03-26 23:10:11 +00:00