mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-25 13:14:07 +08:00
dcf0cd1cc5
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion tag removal, duplicate generation and forwarding. For HSR, insertion involves the switch adding a 6 byte HSR header after the 14 byte Ethernet header. For PRP it adds a 6 byte trailer. Tag removal involves automatically stripping the HSR/PRP header/trailer in the switch. This is possible when the switch also performs auto deduplication using the HSR/PRP header/trailer (making it no longer required). Forwarding involves automatically forwarding between redundant ports in an HSR. This is crucial because delay is accumulated as a frame passes through each node in the ring. Duplication involves the switch automatically sending a single frame from the CPU port to both redundant ports. This is required because the inserted HSR/PRP header/trailer must contain the same sequence number on the frames sent out both redundant ports. Export is_hsr_master so DSA can tell them apart from other devices in dsa_slave_changeupper. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
24 lines
692 B
C
24 lines
692 B
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/* Copyright 2011-2014 Autronica Fire and Security AS
|
|
*
|
|
* Author(s):
|
|
* 2011-2014 Arvid Brodin, arvid.brodin@alten.se
|
|
*
|
|
* include file for HSR and PRP.
|
|
*/
|
|
|
|
#ifndef __HSR_DEVICE_H
|
|
#define __HSR_DEVICE_H
|
|
|
|
#include <linux/netdevice.h>
|
|
#include "hsr_main.h"
|
|
|
|
void hsr_del_ports(struct hsr_priv *hsr);
|
|
void hsr_dev_setup(struct net_device *dev);
|
|
int hsr_dev_finalize(struct net_device *hsr_dev, struct net_device *slave[2],
|
|
unsigned char multicast_spec, u8 protocol_version,
|
|
struct netlink_ext_ack *extack);
|
|
void hsr_check_carrier_and_operstate(struct hsr_priv *hsr);
|
|
int hsr_get_max_mtu(struct hsr_priv *hsr);
|
|
#endif /* __HSR_DEVICE_H */
|