mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-02 16:44:10 +08:00
1e405bc251
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp() assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc() so no
data can leak apart from previous readings.
In this driver the timestamp can end up in various different locations
depending on what other channels are enabled. As a result, we don't
use a structure to specify it's position as that would be misleading.
Fixes: e717f8c6df ("iio: adc: Add the TI ads124s08 ADC code")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200920112742.170751-9-jic23@kernel.org
381 lines
9.1 KiB
C
381 lines
9.1 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/* TI ADS124S0X chip family driver
|
|
* Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com/
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sysfs.h>
|
|
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
/* Commands */
|
|
#define ADS124S08_CMD_NOP 0x00
|
|
#define ADS124S08_CMD_WAKEUP 0x02
|
|
#define ADS124S08_CMD_PWRDWN 0x04
|
|
#define ADS124S08_CMD_RESET 0x06
|
|
#define ADS124S08_CMD_START 0x08
|
|
#define ADS124S08_CMD_STOP 0x0a
|
|
#define ADS124S08_CMD_SYOCAL 0x16
|
|
#define ADS124S08_CMD_SYGCAL 0x17
|
|
#define ADS124S08_CMD_SFOCAL 0x19
|
|
#define ADS124S08_CMD_RDATA 0x12
|
|
#define ADS124S08_CMD_RREG 0x20
|
|
#define ADS124S08_CMD_WREG 0x40
|
|
|
|
/* Registers */
|
|
#define ADS124S08_ID_REG 0x00
|
|
#define ADS124S08_STATUS 0x01
|
|
#define ADS124S08_INPUT_MUX 0x02
|
|
#define ADS124S08_PGA 0x03
|
|
#define ADS124S08_DATA_RATE 0x04
|
|
#define ADS124S08_REF 0x05
|
|
#define ADS124S08_IDACMAG 0x06
|
|
#define ADS124S08_IDACMUX 0x07
|
|
#define ADS124S08_VBIAS 0x08
|
|
#define ADS124S08_SYS 0x09
|
|
#define ADS124S08_OFCAL0 0x0a
|
|
#define ADS124S08_OFCAL1 0x0b
|
|
#define ADS124S08_OFCAL2 0x0c
|
|
#define ADS124S08_FSCAL0 0x0d
|
|
#define ADS124S08_FSCAL1 0x0e
|
|
#define ADS124S08_FSCAL2 0x0f
|
|
#define ADS124S08_GPIODAT 0x10
|
|
#define ADS124S08_GPIOCON 0x11
|
|
|
|
/* ADS124S0x common channels */
|
|
#define ADS124S08_AIN0 0x00
|
|
#define ADS124S08_AIN1 0x01
|
|
#define ADS124S08_AIN2 0x02
|
|
#define ADS124S08_AIN3 0x03
|
|
#define ADS124S08_AIN4 0x04
|
|
#define ADS124S08_AIN5 0x05
|
|
#define ADS124S08_AINCOM 0x0c
|
|
/* ADS124S08 only channels */
|
|
#define ADS124S08_AIN6 0x06
|
|
#define ADS124S08_AIN7 0x07
|
|
#define ADS124S08_AIN8 0x08
|
|
#define ADS124S08_AIN9 0x09
|
|
#define ADS124S08_AIN10 0x0a
|
|
#define ADS124S08_AIN11 0x0b
|
|
#define ADS124S08_MAX_CHANNELS 12
|
|
|
|
#define ADS124S08_POS_MUX_SHIFT 0x04
|
|
#define ADS124S08_INT_REF 0x09
|
|
|
|
#define ADS124S08_START_REG_MASK 0x1f
|
|
#define ADS124S08_NUM_BYTES_MASK 0x1f
|
|
|
|
#define ADS124S08_START_CONV 0x01
|
|
#define ADS124S08_STOP_CONV 0x00
|
|
|
|
enum ads124s_id {
|
|
ADS124S08_ID,
|
|
ADS124S06_ID,
|
|
};
|
|
|
|
struct ads124s_chip_info {
|
|
const struct iio_chan_spec *channels;
|
|
unsigned int num_channels;
|
|
};
|
|
|
|
struct ads124s_private {
|
|
const struct ads124s_chip_info *chip_info;
|
|
struct gpio_desc *reset_gpio;
|
|
struct spi_device *spi;
|
|
struct mutex lock;
|
|
/*
|
|
* Used to correctly align data.
|
|
* Ensure timestamp is naturally aligned.
|
|
* Note that the full buffer length may not be needed if not
|
|
* all channels are enabled, as long as the alignment of the
|
|
* timestamp is maintained.
|
|
*/
|
|
u32 buffer[ADS124S08_MAX_CHANNELS + sizeof(s64)/sizeof(u32)] __aligned(8);
|
|
u8 data[5] ____cacheline_aligned;
|
|
};
|
|
|
|
#define ADS124S08_CHAN(index) \
|
|
{ \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.channel = index, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.scan_index = index, \
|
|
.scan_type = { \
|
|
.sign = 'u', \
|
|
.realbits = 32, \
|
|
.storagebits = 32, \
|
|
}, \
|
|
}
|
|
|
|
static const struct iio_chan_spec ads124s06_channels[] = {
|
|
ADS124S08_CHAN(0),
|
|
ADS124S08_CHAN(1),
|
|
ADS124S08_CHAN(2),
|
|
ADS124S08_CHAN(3),
|
|
ADS124S08_CHAN(4),
|
|
ADS124S08_CHAN(5),
|
|
};
|
|
|
|
static const struct iio_chan_spec ads124s08_channels[] = {
|
|
ADS124S08_CHAN(0),
|
|
ADS124S08_CHAN(1),
|
|
ADS124S08_CHAN(2),
|
|
ADS124S08_CHAN(3),
|
|
ADS124S08_CHAN(4),
|
|
ADS124S08_CHAN(5),
|
|
ADS124S08_CHAN(6),
|
|
ADS124S08_CHAN(7),
|
|
ADS124S08_CHAN(8),
|
|
ADS124S08_CHAN(9),
|
|
ADS124S08_CHAN(10),
|
|
ADS124S08_CHAN(11),
|
|
};
|
|
|
|
static const struct ads124s_chip_info ads124s_chip_info_tbl[] = {
|
|
[ADS124S08_ID] = {
|
|
.channels = ads124s08_channels,
|
|
.num_channels = ARRAY_SIZE(ads124s08_channels),
|
|
},
|
|
[ADS124S06_ID] = {
|
|
.channels = ads124s06_channels,
|
|
.num_channels = ARRAY_SIZE(ads124s06_channels),
|
|
},
|
|
};
|
|
|
|
static int ads124s_write_cmd(struct iio_dev *indio_dev, u8 command)
|
|
{
|
|
struct ads124s_private *priv = iio_priv(indio_dev);
|
|
|
|
priv->data[0] = command;
|
|
|
|
return spi_write(priv->spi, &priv->data[0], 1);
|
|
}
|
|
|
|
static int ads124s_write_reg(struct iio_dev *indio_dev, u8 reg, u8 data)
|
|
{
|
|
struct ads124s_private *priv = iio_priv(indio_dev);
|
|
|
|
priv->data[0] = ADS124S08_CMD_WREG | reg;
|
|
priv->data[1] = 0x0;
|
|
priv->data[2] = data;
|
|
|
|
return spi_write(priv->spi, &priv->data[0], 3);
|
|
}
|
|
|
|
static int ads124s_reset(struct iio_dev *indio_dev)
|
|
{
|
|
struct ads124s_private *priv = iio_priv(indio_dev);
|
|
|
|
if (priv->reset_gpio) {
|
|
gpiod_set_value(priv->reset_gpio, 0);
|
|
udelay(200);
|
|
gpiod_set_value(priv->reset_gpio, 1);
|
|
} else {
|
|
return ads124s_write_cmd(indio_dev, ADS124S08_CMD_RESET);
|
|
}
|
|
|
|
return 0;
|
|
};
|
|
|
|
static int ads124s_read(struct iio_dev *indio_dev, unsigned int chan)
|
|
{
|
|
struct ads124s_private *priv = iio_priv(indio_dev);
|
|
int ret;
|
|
struct spi_transfer t[] = {
|
|
{
|
|
.tx_buf = &priv->data[0],
|
|
.len = 4,
|
|
.cs_change = 1,
|
|
}, {
|
|
.tx_buf = &priv->data[1],
|
|
.rx_buf = &priv->data[1],
|
|
.len = 4,
|
|
},
|
|
};
|
|
|
|
priv->data[0] = ADS124S08_CMD_RDATA;
|
|
memset(&priv->data[1], ADS124S08_CMD_NOP, sizeof(priv->data) - 1);
|
|
|
|
ret = spi_sync_transfer(priv->spi, t, ARRAY_SIZE(t));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return get_unaligned_be24(&priv->data[2]);
|
|
}
|
|
|
|
static int ads124s_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long m)
|
|
{
|
|
struct ads124s_private *priv = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
mutex_lock(&priv->lock);
|
|
switch (m) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = ads124s_write_reg(indio_dev, ADS124S08_INPUT_MUX,
|
|
chan->channel);
|
|
if (ret) {
|
|
dev_err(&priv->spi->dev, "Set ADC CH failed\n");
|
|
goto out;
|
|
}
|
|
|
|
ret = ads124s_write_cmd(indio_dev, ADS124S08_START_CONV);
|
|
if (ret) {
|
|
dev_err(&priv->spi->dev, "Start conversions failed\n");
|
|
goto out;
|
|
}
|
|
|
|
ret = ads124s_read(indio_dev, chan->channel);
|
|
if (ret < 0) {
|
|
dev_err(&priv->spi->dev, "Read ADC failed\n");
|
|
goto out;
|
|
}
|
|
|
|
*val = ret;
|
|
|
|
ret = ads124s_write_cmd(indio_dev, ADS124S08_STOP_CONV);
|
|
if (ret) {
|
|
dev_err(&priv->spi->dev, "Stop conversions failed\n");
|
|
goto out;
|
|
}
|
|
|
|
ret = IIO_VAL_INT;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
out:
|
|
mutex_unlock(&priv->lock);
|
|
return ret;
|
|
}
|
|
|
|
static const struct iio_info ads124s_info = {
|
|
.read_raw = &ads124s_read_raw,
|
|
};
|
|
|
|
static irqreturn_t ads124s_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct ads124s_private *priv = iio_priv(indio_dev);
|
|
int scan_index, j = 0;
|
|
int ret;
|
|
|
|
for_each_set_bit(scan_index, indio_dev->active_scan_mask,
|
|
indio_dev->masklength) {
|
|
ret = ads124s_write_reg(indio_dev, ADS124S08_INPUT_MUX,
|
|
scan_index);
|
|
if (ret)
|
|
dev_err(&priv->spi->dev, "Set ADC CH failed\n");
|
|
|
|
ret = ads124s_write_cmd(indio_dev, ADS124S08_START_CONV);
|
|
if (ret)
|
|
dev_err(&priv->spi->dev, "Start ADC conversions failed\n");
|
|
|
|
priv->buffer[j] = ads124s_read(indio_dev, scan_index);
|
|
ret = ads124s_write_cmd(indio_dev, ADS124S08_STOP_CONV);
|
|
if (ret)
|
|
dev_err(&priv->spi->dev, "Stop ADC conversions failed\n");
|
|
|
|
j++;
|
|
}
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev, priv->buffer,
|
|
pf->timestamp);
|
|
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int ads124s_probe(struct spi_device *spi)
|
|
{
|
|
struct ads124s_private *ads124s_priv;
|
|
struct iio_dev *indio_dev;
|
|
const struct spi_device_id *spi_id = spi_get_device_id(spi);
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*ads124s_priv));
|
|
if (indio_dev == NULL)
|
|
return -ENOMEM;
|
|
|
|
ads124s_priv = iio_priv(indio_dev);
|
|
|
|
ads124s_priv->reset_gpio = devm_gpiod_get_optional(&spi->dev,
|
|
"reset", GPIOD_OUT_LOW);
|
|
if (IS_ERR(ads124s_priv->reset_gpio))
|
|
dev_info(&spi->dev, "Reset GPIO not defined\n");
|
|
|
|
ads124s_priv->chip_info = &ads124s_chip_info_tbl[spi_id->driver_data];
|
|
|
|
spi_set_drvdata(spi, indio_dev);
|
|
|
|
ads124s_priv->spi = spi;
|
|
|
|
indio_dev->name = spi_id->name;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = ads124s_priv->chip_info->channels;
|
|
indio_dev->num_channels = ads124s_priv->chip_info->num_channels;
|
|
indio_dev->info = &ads124s_info;
|
|
|
|
mutex_init(&ads124s_priv->lock);
|
|
|
|
ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, NULL,
|
|
ads124s_trigger_handler, NULL);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "iio triggered buffer setup failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ads124s_reset(indio_dev);
|
|
|
|
return devm_iio_device_register(&spi->dev, indio_dev);
|
|
}
|
|
|
|
static const struct spi_device_id ads124s_id[] = {
|
|
{ "ads124s06", ADS124S06_ID },
|
|
{ "ads124s08", ADS124S08_ID },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, ads124s_id);
|
|
|
|
static const struct of_device_id ads124s_of_table[] = {
|
|
{ .compatible = "ti,ads124s06" },
|
|
{ .compatible = "ti,ads124s08" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ads124s_of_table);
|
|
|
|
static struct spi_driver ads124s_driver = {
|
|
.driver = {
|
|
.name = "ads124s08",
|
|
.of_match_table = ads124s_of_table,
|
|
},
|
|
.probe = ads124s_probe,
|
|
.id_table = ads124s_id,
|
|
};
|
|
module_spi_driver(ads124s_driver);
|
|
|
|
MODULE_AUTHOR("Dan Murphy <dmuprhy@ti.com>");
|
|
MODULE_DESCRIPTION("TI TI_ADS12S0X ADC");
|
|
MODULE_LICENSE("GPL v2");
|