mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 10:04:12 +08:00
f1a3c61913
Cc: Akhil Bhansali <abhansali@stec-inc.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
331 lines
9.6 KiB
C
331 lines
9.6 KiB
C
/* Copyright 2012 STEC, Inc.
|
|
*
|
|
* This file is licensed under the terms of the 3-clause
|
|
* BSD License (http://opensource.org/licenses/BSD-3-Clause)
|
|
* or the GNU GPL-2.0 (http://www.gnu.org/licenses/gpl-2.0.html),
|
|
* at your option. Both licenses are also available in the LICENSE file
|
|
* distributed with this project. This file may not be copied, modified,
|
|
* or distributed except in accordance with those terms.
|
|
*/
|
|
|
|
|
|
#ifndef SKD_S1120_H
|
|
#define SKD_S1120_H
|
|
|
|
#pragma pack(push, s1120_h, 1)
|
|
|
|
/*
|
|
* Q-channel, 64-bit r/w
|
|
*/
|
|
#define FIT_Q_COMMAND 0x400u
|
|
#define FIT_QCMD_QID_MASK (0x3 << 1)
|
|
#define FIT_QCMD_QID0 (0x0 << 1)
|
|
#define FIT_QCMD_QID_NORMAL FIT_QCMD_QID0
|
|
#define FIT_QCMD_QID1 (0x1 << 1)
|
|
#define FIT_QCMD_QID2 (0x2 << 1)
|
|
#define FIT_QCMD_QID3 (0x3 << 1)
|
|
#define FIT_QCMD_FLUSH_QUEUE (0ull) /* add QID */
|
|
#define FIT_QCMD_MSGSIZE_MASK (0x3 << 4)
|
|
#define FIT_QCMD_MSGSIZE_64 (0x0 << 4)
|
|
#define FIT_QCMD_MSGSIZE_128 (0x1 << 4)
|
|
#define FIT_QCMD_MSGSIZE_256 (0x2 << 4)
|
|
#define FIT_QCMD_MSGSIZE_512 (0x3 << 4)
|
|
#define FIT_QCMD_BASE_ADDRESS_MASK (0xFFFFFFFFFFFFFFC0ull)
|
|
|
|
/*
|
|
* Control, 32-bit r/w
|
|
*/
|
|
#define FIT_CONTROL 0x500u
|
|
#define FIT_CR_HARD_RESET (1u << 0u)
|
|
#define FIT_CR_SOFT_RESET (1u << 1u)
|
|
#define FIT_CR_DIS_TIMESTAMPS (1u << 6u)
|
|
#define FIT_CR_ENABLE_INTERRUPTS (1u << 7u)
|
|
|
|
/*
|
|
* Status, 32-bit, r/o
|
|
*/
|
|
#define FIT_STATUS 0x510u
|
|
#define FIT_SR_DRIVE_STATE_MASK 0x000000FFu
|
|
#define FIT_SR_SIGNATURE (0xFF << 8)
|
|
#define FIT_SR_PIO_DMA (1 << 16)
|
|
#define FIT_SR_DRIVE_OFFLINE 0x00
|
|
#define FIT_SR_DRIVE_INIT 0x01
|
|
/* #define FIT_SR_DRIVE_READY 0x02 */
|
|
#define FIT_SR_DRIVE_ONLINE 0x03
|
|
#define FIT_SR_DRIVE_BUSY 0x04
|
|
#define FIT_SR_DRIVE_FAULT 0x05
|
|
#define FIT_SR_DRIVE_DEGRADED 0x06
|
|
#define FIT_SR_PCIE_LINK_DOWN 0x07
|
|
#define FIT_SR_DRIVE_SOFT_RESET 0x08
|
|
#define FIT_SR_DRIVE_INIT_FAULT 0x09
|
|
#define FIT_SR_DRIVE_BUSY_SANITIZE 0x0A
|
|
#define FIT_SR_DRIVE_BUSY_ERASE 0x0B
|
|
#define FIT_SR_DRIVE_FW_BOOTING 0x0C
|
|
#define FIT_SR_DRIVE_NEED_FW_DOWNLOAD 0xFE
|
|
#define FIT_SR_DEVICE_MISSING 0xFF
|
|
#define FIT_SR__RESERVED 0xFFFFFF00u
|
|
|
|
/*
|
|
* FIT_STATUS - Status register data definition
|
|
*/
|
|
#define FIT_SR_STATE_MASK (0xFF << 0)
|
|
#define FIT_SR_SIGNATURE (0xFF << 8)
|
|
#define FIT_SR_PIO_DMA (1 << 16)
|
|
|
|
/*
|
|
* Interrupt status, 32-bit r/w1c (w1c ==> write 1 to clear)
|
|
*/
|
|
#define FIT_INT_STATUS_HOST 0x520u
|
|
#define FIT_ISH_FW_STATE_CHANGE (1u << 0u)
|
|
#define FIT_ISH_COMPLETION_POSTED (1u << 1u)
|
|
#define FIT_ISH_MSG_FROM_DEV (1u << 2u)
|
|
#define FIT_ISH_UNDEFINED_3 (1u << 3u)
|
|
#define FIT_ISH_UNDEFINED_4 (1u << 4u)
|
|
#define FIT_ISH_Q0_FULL (1u << 5u)
|
|
#define FIT_ISH_Q1_FULL (1u << 6u)
|
|
#define FIT_ISH_Q2_FULL (1u << 7u)
|
|
#define FIT_ISH_Q3_FULL (1u << 8u)
|
|
#define FIT_ISH_QCMD_FIFO_OVERRUN (1u << 9u)
|
|
#define FIT_ISH_BAD_EXP_ROM_READ (1u << 10u)
|
|
|
|
#define FIT_INT_DEF_MASK \
|
|
(FIT_ISH_FW_STATE_CHANGE | \
|
|
FIT_ISH_COMPLETION_POSTED | \
|
|
FIT_ISH_MSG_FROM_DEV | \
|
|
FIT_ISH_Q0_FULL | \
|
|
FIT_ISH_Q1_FULL | \
|
|
FIT_ISH_Q2_FULL | \
|
|
FIT_ISH_Q3_FULL | \
|
|
FIT_ISH_QCMD_FIFO_OVERRUN | \
|
|
FIT_ISH_BAD_EXP_ROM_READ)
|
|
|
|
#define FIT_INT_QUEUE_FULL \
|
|
(FIT_ISH_Q0_FULL | \
|
|
FIT_ISH_Q1_FULL | \
|
|
FIT_ISH_Q2_FULL | \
|
|
FIT_ISH_Q3_FULL)
|
|
|
|
#define MSI_MSG_NWL_ERROR_0 0x00000000
|
|
#define MSI_MSG_NWL_ERROR_1 0x00000001
|
|
#define MSI_MSG_NWL_ERROR_2 0x00000002
|
|
#define MSI_MSG_NWL_ERROR_3 0x00000003
|
|
#define MSI_MSG_STATE_CHANGE 0x00000004
|
|
#define MSI_MSG_COMPLETION_POSTED 0x00000005
|
|
#define MSI_MSG_MSG_FROM_DEV 0x00000006
|
|
#define MSI_MSG_RESERVED_0 0x00000007
|
|
#define MSI_MSG_RESERVED_1 0x00000008
|
|
#define MSI_MSG_QUEUE_0_FULL 0x00000009
|
|
#define MSI_MSG_QUEUE_1_FULL 0x0000000A
|
|
#define MSI_MSG_QUEUE_2_FULL 0x0000000B
|
|
#define MSI_MSG_QUEUE_3_FULL 0x0000000C
|
|
|
|
#define FIT_INT_RESERVED_MASK \
|
|
(FIT_ISH_UNDEFINED_3 | \
|
|
FIT_ISH_UNDEFINED_4)
|
|
|
|
/*
|
|
* Interrupt mask, 32-bit r/w
|
|
* Bit definitions are the same as FIT_INT_STATUS_HOST
|
|
*/
|
|
#define FIT_INT_MASK_HOST 0x528u
|
|
|
|
/*
|
|
* Message to device, 32-bit r/w
|
|
*/
|
|
#define FIT_MSG_TO_DEVICE 0x540u
|
|
|
|
/*
|
|
* Message from device, 32-bit, r/o
|
|
*/
|
|
#define FIT_MSG_FROM_DEVICE 0x548u
|
|
|
|
/*
|
|
* 32-bit messages to/from device, composition/extraction macros
|
|
*/
|
|
#define FIT_MXD_CONS(TYPE, PARAM, DATA) \
|
|
((((TYPE) & 0xFFu) << 24u) | \
|
|
(((PARAM) & 0xFFu) << 16u) | \
|
|
(((DATA) & 0xFFFFu) << 0u))
|
|
#define FIT_MXD_TYPE(MXD) (((MXD) >> 24u) & 0xFFu)
|
|
#define FIT_MXD_PARAM(MXD) (((MXD) >> 16u) & 0xFFu)
|
|
#define FIT_MXD_DATA(MXD) (((MXD) >> 0u) & 0xFFFFu)
|
|
|
|
/*
|
|
* Types of messages to/from device
|
|
*/
|
|
#define FIT_MTD_FITFW_INIT 0x01u
|
|
#define FIT_MTD_GET_CMDQ_DEPTH 0x02u
|
|
#define FIT_MTD_SET_COMPQ_DEPTH 0x03u
|
|
#define FIT_MTD_SET_COMPQ_ADDR 0x04u
|
|
#define FIT_MTD_ARM_QUEUE 0x05u
|
|
#define FIT_MTD_CMD_LOG_HOST_ID 0x07u
|
|
#define FIT_MTD_CMD_LOG_TIME_STAMP_LO 0x08u
|
|
#define FIT_MTD_CMD_LOG_TIME_STAMP_HI 0x09u
|
|
#define FIT_MFD_SMART_EXCEEDED 0x10u
|
|
#define FIT_MFD_POWER_DOWN 0x11u
|
|
#define FIT_MFD_OFFLINE 0x12u
|
|
#define FIT_MFD_ONLINE 0x13u
|
|
#define FIT_MFD_FW_RESTARTING 0x14u
|
|
#define FIT_MFD_PM_ACTIVE 0x15u
|
|
#define FIT_MFD_PM_STANDBY 0x16u
|
|
#define FIT_MFD_PM_SLEEP 0x17u
|
|
#define FIT_MFD_CMD_PROGRESS 0x18u
|
|
|
|
#define FIT_MTD_DEBUG 0xFEu
|
|
#define FIT_MFD_DEBUG 0xFFu
|
|
|
|
#define FIT_MFD_MASK (0xFFu)
|
|
#define FIT_MFD_DATA_MASK (0xFFu)
|
|
#define FIT_MFD_MSG(x) (((x) >> 24) & FIT_MFD_MASK)
|
|
#define FIT_MFD_DATA(x) ((x) & FIT_MFD_MASK)
|
|
|
|
/*
|
|
* Extra arg to FIT_MSG_TO_DEVICE, 64-bit r/w
|
|
* Used to set completion queue address (FIT_MTD_SET_COMPQ_ADDR)
|
|
* (was Response buffer in docs)
|
|
*/
|
|
#define FIT_MSG_TO_DEVICE_ARG 0x580u
|
|
|
|
/*
|
|
* Hardware (ASIC) version, 32-bit r/o
|
|
*/
|
|
#define FIT_HW_VERSION 0x588u
|
|
|
|
/*
|
|
* Scatter/gather list descriptor.
|
|
* 32-bytes and must be aligned on a 32-byte boundary.
|
|
* All fields are in little endian order.
|
|
*/
|
|
struct fit_sg_descriptor {
|
|
uint32_t control;
|
|
uint32_t byte_count;
|
|
uint64_t host_side_addr;
|
|
uint64_t dev_side_addr;
|
|
uint64_t next_desc_ptr;
|
|
};
|
|
|
|
#define FIT_SGD_CONTROL_NOT_LAST 0x000u
|
|
#define FIT_SGD_CONTROL_LAST 0x40Eu
|
|
|
|
/*
|
|
* Header at the beginning of a FIT message. The header
|
|
* is followed by SSDI requests each 64 bytes.
|
|
* A FIT message can be up to 512 bytes long and must start
|
|
* on a 64-byte boundary.
|
|
*/
|
|
struct fit_msg_hdr {
|
|
uint8_t protocol_id;
|
|
uint8_t num_protocol_cmds_coalesced;
|
|
uint8_t _reserved[62];
|
|
};
|
|
|
|
#define FIT_PROTOCOL_ID_FIT 1
|
|
#define FIT_PROTOCOL_ID_SSDI 2
|
|
#define FIT_PROTOCOL_ID_SOFIT 3
|
|
|
|
|
|
#define FIT_PROTOCOL_MINOR_VER(mtd_val) ((mtd_val >> 16) & 0xF)
|
|
#define FIT_PROTOCOL_MAJOR_VER(mtd_val) ((mtd_val >> 20) & 0xF)
|
|
|
|
/*
|
|
* Format of a completion entry. The completion queue is circular
|
|
* and must have at least as many entries as the maximum number
|
|
* of commands that may be issued to the device.
|
|
*
|
|
* There are no head/tail pointers. The cycle value is used to
|
|
* infer the presence of new completion records.
|
|
* Initially the cycle in all entries is 0, the index is 0, and
|
|
* the cycle value to expect is 1. When completions are added
|
|
* their cycle values are set to 1. When the index wraps the
|
|
* cycle value to expect is incremented.
|
|
*
|
|
* Command_context is opaque and taken verbatim from the SSDI command.
|
|
* All other fields are big endian.
|
|
*/
|
|
#define FIT_PROTOCOL_VERSION_0 0
|
|
|
|
/*
|
|
* Protocol major version 1 completion entry.
|
|
* The major protocol version is found in bits
|
|
* 20-23 of the FIT_MTD_FITFW_INIT response.
|
|
*/
|
|
struct fit_completion_entry_v1 {
|
|
uint32_t num_returned_bytes;
|
|
uint16_t tag;
|
|
uint8_t status; /* SCSI status */
|
|
uint8_t cycle;
|
|
};
|
|
#define FIT_PROTOCOL_VERSION_1 1
|
|
#define FIT_PROTOCOL_VERSION_CURRENT FIT_PROTOCOL_VERSION_1
|
|
|
|
struct fit_comp_error_info {
|
|
uint8_t type:7; /* 00: Bits0-6 indicates the type of sense data. */
|
|
uint8_t valid:1; /* 00: Bit 7 := 1 ==> info field is valid. */
|
|
uint8_t reserved0; /* 01: Obsolete field */
|
|
uint8_t key:4; /* 02: Bits0-3 indicate the sense key. */
|
|
uint8_t reserved2:1; /* 02: Reserved bit. */
|
|
uint8_t bad_length:1; /* 02: Incorrect Length Indicator */
|
|
uint8_t end_medium:1; /* 02: End of Medium */
|
|
uint8_t file_mark:1; /* 02: Filemark */
|
|
uint8_t info[4]; /* 03: */
|
|
uint8_t reserved1; /* 07: Additional Sense Length */
|
|
uint8_t cmd_spec[4]; /* 08: Command Specific Information */
|
|
uint8_t code; /* 0C: Additional Sense Code */
|
|
uint8_t qual; /* 0D: Additional Sense Code Qualifier */
|
|
uint8_t fruc; /* 0E: Field Replaceable Unit Code */
|
|
uint8_t sks_high:7; /* 0F: Sense Key Specific (MSB) */
|
|
uint8_t sks_valid:1; /* 0F: Sense Key Specific Valid */
|
|
uint16_t sks_low; /* 10: Sense Key Specific (LSW) */
|
|
uint16_t reserved3; /* 12: Part of additional sense bytes (unused) */
|
|
uint16_t uec; /* 14: Additional Sense Bytes */
|
|
uint64_t per; /* 16: Additional Sense Bytes */
|
|
uint8_t reserved4[2]; /* 1E: Additional Sense Bytes (unused) */
|
|
};
|
|
|
|
|
|
/* Task management constants */
|
|
#define SOFT_TASK_SIMPLE 0x00
|
|
#define SOFT_TASK_HEAD_OF_QUEUE 0x01
|
|
#define SOFT_TASK_ORDERED 0x02
|
|
|
|
/* Version zero has the last 32 bits reserved,
|
|
* Version one has the last 32 bits sg_list_len_bytes;
|
|
*/
|
|
struct skd_command_header {
|
|
uint64_t sg_list_dma_address;
|
|
uint16_t tag;
|
|
uint8_t attribute;
|
|
uint8_t add_cdb_len; /* In 32 bit words */
|
|
uint32_t sg_list_len_bytes;
|
|
};
|
|
|
|
struct skd_scsi_request {
|
|
struct skd_command_header hdr;
|
|
unsigned char cdb[16];
|
|
/* unsigned char _reserved[16]; */
|
|
};
|
|
|
|
struct driver_inquiry_data {
|
|
uint8_t peripheral_device_type:5;
|
|
uint8_t qualifier:3;
|
|
uint8_t page_code;
|
|
uint16_t page_length;
|
|
uint16_t pcie_bus_number;
|
|
uint8_t pcie_device_number;
|
|
uint8_t pcie_function_number;
|
|
uint8_t pcie_link_speed;
|
|
uint8_t pcie_link_lanes;
|
|
uint16_t pcie_vendor_id;
|
|
uint16_t pcie_device_id;
|
|
uint16_t pcie_subsystem_vendor_id;
|
|
uint16_t pcie_subsystem_device_id;
|
|
uint8_t reserved1[2];
|
|
uint8_t reserved2[3];
|
|
uint8_t driver_version_length;
|
|
uint8_t driver_version[0x14];
|
|
};
|
|
|
|
#pragma pack(pop, s1120_h)
|
|
|
|
#endif /* SKD_S1120_H */
|