mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 18:14:07 +08:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
585 lines
13 KiB
C
585 lines
13 KiB
C
/*
|
|
* Sun3 SCSI stuff by Erik Verbruggen (erik@bigmama.xtdnet.nl)
|
|
*
|
|
* Sun3 DMA routines added by Sam Creasey (sammy@sammy.net)
|
|
*
|
|
* VME support added by Sam Creasey
|
|
*
|
|
* Adapted from sun3_scsi.c -- see there for other headers
|
|
*
|
|
* TODO: modify this driver to support multiple Sun3 SCSI VME boards
|
|
*
|
|
*/
|
|
|
|
#define AUTOSENSE
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
|
|
#include <asm/sun3ints.h>
|
|
#include <asm/dvma.h>
|
|
#include <asm/idprom.h>
|
|
#include <asm/machines.h>
|
|
|
|
#define SUN3_SCSI_VME
|
|
|
|
#undef SUN3_SCSI_DEBUG
|
|
|
|
/* dma on! */
|
|
#define REAL_DMA
|
|
|
|
#include "scsi.h"
|
|
#include <scsi/scsi_host.h>
|
|
#include "sun3_scsi.h"
|
|
#include "NCR5380.h"
|
|
|
|
extern int sun3_map_test(unsigned long, char *);
|
|
|
|
#define USE_WRAPPER
|
|
/*#define RESET_BOOT */
|
|
#define DRIVER_SETUP
|
|
|
|
#define NDEBUG 0
|
|
|
|
/*
|
|
* BUG can be used to trigger a strange code-size related hang on 2.1 kernels
|
|
*/
|
|
#ifdef BUG
|
|
#undef RESET_BOOT
|
|
#undef DRIVER_SETUP
|
|
#endif
|
|
|
|
/* #define SUPPORT_TAGS */
|
|
|
|
//#define ENABLE_IRQ() enable_irq( SUN3_VEC_VMESCSI0 );
|
|
#define ENABLE_IRQ()
|
|
|
|
|
|
static irqreturn_t scsi_sun3_intr(int irq, void *dummy, struct pt_regs *fp);
|
|
static inline unsigned char sun3scsi_read(int reg);
|
|
static inline void sun3scsi_write(int reg, int value);
|
|
|
|
static int setup_can_queue = -1;
|
|
module_param(setup_can_queue, int, 0);
|
|
static int setup_cmd_per_lun = -1;
|
|
module_param(setup_cmd_per_lun, int, 0);
|
|
static int setup_sg_tablesize = -1;
|
|
module_param(setup_sg_tablesize, int, 0);
|
|
#ifdef SUPPORT_TAGS
|
|
static int setup_use_tagged_queuing = -1;
|
|
module_param(setup_use_tagged_queuing, int, 0);
|
|
#endif
|
|
static int setup_hostid = -1;
|
|
module_param(setup_hostid, int, 0);
|
|
|
|
static Scsi_Cmnd *sun3_dma_setup_done = NULL;
|
|
|
|
#define AFTER_RESET_DELAY (HZ/2)
|
|
|
|
/* ms to wait after hitting dma regs */
|
|
#define SUN3_DMA_DELAY 10
|
|
|
|
/* dvma buffer to allocate -- 32k should hopefully be more than sufficient */
|
|
#define SUN3_DVMA_BUFSIZE 0xe000
|
|
|
|
/* minimum number of bytes to do dma on */
|
|
#define SUN3_DMA_MINSIZE 128
|
|
|
|
static volatile unsigned char *sun3_scsi_regp;
|
|
static volatile struct sun3_dma_regs *dregs;
|
|
#ifdef OLDDMA
|
|
static unsigned char *dmabuf = NULL; /* dma memory buffer */
|
|
#endif
|
|
static unsigned char *sun3_dma_orig_addr = NULL;
|
|
static unsigned long sun3_dma_orig_count = 0;
|
|
static int sun3_dma_active = 0;
|
|
static unsigned long last_residual = 0;
|
|
|
|
/*
|
|
* NCR 5380 register access functions
|
|
*/
|
|
|
|
static inline unsigned char sun3scsi_read(int reg)
|
|
{
|
|
return( sun3_scsi_regp[reg] );
|
|
}
|
|
|
|
static inline void sun3scsi_write(int reg, int value)
|
|
{
|
|
sun3_scsi_regp[reg] = value;
|
|
}
|
|
|
|
/*
|
|
* XXX: status debug
|
|
*/
|
|
static struct Scsi_Host *default_instance;
|
|
|
|
/*
|
|
* Function : int sun3scsi_detect(Scsi_Host_Template * tpnt)
|
|
*
|
|
* Purpose : initializes mac NCR5380 driver based on the
|
|
* command line / compile time port and irq definitions.
|
|
*
|
|
* Inputs : tpnt - template for this SCSI adapter.
|
|
*
|
|
* Returns : 1 if a host adapter was found, 0 if not.
|
|
*
|
|
*/
|
|
|
|
static int sun3scsi_detect(Scsi_Host_Template * tpnt)
|
|
{
|
|
unsigned long ioaddr, irq = 0;
|
|
static int called = 0;
|
|
struct Scsi_Host *instance;
|
|
int i;
|
|
unsigned long addrs[3] = { IOBASE_SUN3_VMESCSI,
|
|
IOBASE_SUN3_VMESCSI + 0x4000,
|
|
0 };
|
|
unsigned long vecs[3] = { SUN3_VEC_VMESCSI0,
|
|
SUN3_VEC_VMESCSI1,
|
|
0 };
|
|
/* check that this machine has an onboard 5380 */
|
|
switch(idprom->id_machtype) {
|
|
case SM_SUN3|SM_3_160:
|
|
case SM_SUN3|SM_3_260:
|
|
break;
|
|
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
if(called)
|
|
return 0;
|
|
|
|
tpnt->proc_name = "Sun3 5380 VME SCSI";
|
|
|
|
/* setup variables */
|
|
tpnt->can_queue =
|
|
(setup_can_queue > 0) ? setup_can_queue : CAN_QUEUE;
|
|
tpnt->cmd_per_lun =
|
|
(setup_cmd_per_lun > 0) ? setup_cmd_per_lun : CMD_PER_LUN;
|
|
tpnt->sg_tablesize =
|
|
(setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_TABLESIZE;
|
|
|
|
if (setup_hostid >= 0)
|
|
tpnt->this_id = setup_hostid;
|
|
else {
|
|
/* use 7 as default */
|
|
tpnt->this_id = 7;
|
|
}
|
|
|
|
ioaddr = 0;
|
|
for(i = 0; addrs[i] != 0; i++) {
|
|
unsigned char x;
|
|
|
|
ioaddr = (unsigned long)sun3_ioremap(addrs[i], PAGE_SIZE,
|
|
SUN3_PAGE_TYPE_VME16);
|
|
irq = vecs[i];
|
|
sun3_scsi_regp = (unsigned char *)ioaddr;
|
|
|
|
dregs = (struct sun3_dma_regs *)(((unsigned char *)ioaddr) + 8);
|
|
|
|
if(sun3_map_test((unsigned long)dregs, &x)) {
|
|
unsigned short oldcsr;
|
|
|
|
oldcsr = dregs->csr;
|
|
dregs->csr = 0;
|
|
udelay(SUN3_DMA_DELAY);
|
|
if(dregs->csr == 0x1400)
|
|
break;
|
|
|
|
dregs->csr = oldcsr;
|
|
}
|
|
|
|
iounmap((void *)ioaddr);
|
|
ioaddr = 0;
|
|
}
|
|
|
|
if(!ioaddr)
|
|
return 0;
|
|
|
|
#ifdef SUPPORT_TAGS
|
|
if (setup_use_tagged_queuing < 0)
|
|
setup_use_tagged_queuing = USE_TAGGED_QUEUING;
|
|
#endif
|
|
|
|
instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
|
|
if(instance == NULL)
|
|
return 0;
|
|
|
|
default_instance = instance;
|
|
|
|
instance->io_port = (unsigned long) ioaddr;
|
|
instance->irq = irq;
|
|
|
|
NCR5380_init(instance, 0);
|
|
|
|
instance->n_io_port = 32;
|
|
|
|
((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0;
|
|
|
|
if (request_irq(instance->irq, scsi_sun3_intr,
|
|
0, "Sun3SCSI-5380VME", NULL)) {
|
|
#ifndef REAL_DMA
|
|
printk("scsi%d: IRQ%d not free, interrupts disabled\n",
|
|
instance->host_no, instance->irq);
|
|
instance->irq = SCSI_IRQ_NONE;
|
|
#else
|
|
printk("scsi%d: IRQ%d not free, bailing out\n",
|
|
instance->host_no, instance->irq);
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
printk("scsi%d: Sun3 5380 VME at port %lX irq", instance->host_no, instance->io_port);
|
|
if (instance->irq == SCSI_IRQ_NONE)
|
|
printk ("s disabled");
|
|
else
|
|
printk (" %d", instance->irq);
|
|
printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
|
|
instance->can_queue, instance->cmd_per_lun,
|
|
SUN3SCSI_PUBLIC_RELEASE);
|
|
printk("\nscsi%d:", instance->host_no);
|
|
NCR5380_print_options(instance);
|
|
printk("\n");
|
|
|
|
dregs->csr = 0;
|
|
udelay(SUN3_DMA_DELAY);
|
|
dregs->csr = CSR_SCSI | CSR_FIFO | CSR_INTR;
|
|
udelay(SUN3_DMA_DELAY);
|
|
dregs->fifo_count = 0;
|
|
dregs->fifo_count_hi = 0;
|
|
dregs->dma_addr_hi = 0;
|
|
dregs->dma_addr_lo = 0;
|
|
dregs->dma_count_hi = 0;
|
|
dregs->dma_count_lo = 0;
|
|
|
|
dregs->ivect = VME_DATA24 | (instance->irq & 0xff);
|
|
|
|
called = 1;
|
|
|
|
#ifdef RESET_BOOT
|
|
sun3_scsi_reset_boot(instance);
|
|
#endif
|
|
|
|
return 1;
|
|
}
|
|
|
|
int sun3scsi_release (struct Scsi_Host *shpnt)
|
|
{
|
|
if (shpnt->irq != SCSI_IRQ_NONE)
|
|
free_irq (shpnt->irq, NULL);
|
|
|
|
iounmap((void *)sun3_scsi_regp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef RESET_BOOT
|
|
/*
|
|
* Our 'bus reset on boot' function
|
|
*/
|
|
|
|
static void sun3_scsi_reset_boot(struct Scsi_Host *instance)
|
|
{
|
|
unsigned long end;
|
|
|
|
NCR5380_local_declare();
|
|
NCR5380_setup(instance);
|
|
|
|
/*
|
|
* Do a SCSI reset to clean up the bus during initialization. No
|
|
* messing with the queues, interrupts, or locks necessary here.
|
|
*/
|
|
|
|
printk( "Sun3 SCSI: resetting the SCSI bus..." );
|
|
|
|
/* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */
|
|
// sun3_disable_irq( IRQ_SUN3_SCSI );
|
|
|
|
/* get in phase */
|
|
NCR5380_write( TARGET_COMMAND_REG,
|
|
PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) ));
|
|
|
|
/* assert RST */
|
|
NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST );
|
|
|
|
/* The min. reset hold time is 25us, so 40us should be enough */
|
|
udelay( 50 );
|
|
|
|
/* reset RST and interrupt */
|
|
NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
|
|
NCR5380_read( RESET_PARITY_INTERRUPT_REG );
|
|
|
|
for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); )
|
|
barrier();
|
|
|
|
/* switch on SCSI IRQ again */
|
|
// sun3_enable_irq( IRQ_SUN3_SCSI );
|
|
|
|
printk( " done\n" );
|
|
}
|
|
#endif
|
|
|
|
static const char * sun3scsi_info (struct Scsi_Host *spnt) {
|
|
return "";
|
|
}
|
|
|
|
// safe bits for the CSR
|
|
#define CSR_GOOD 0x060f
|
|
|
|
static irqreturn_t scsi_sun3_intr(int irq, void *dummy, struct pt_regs *fp)
|
|
{
|
|
unsigned short csr = dregs->csr;
|
|
int handled = 0;
|
|
|
|
dregs->csr &= ~CSR_DMA_ENABLE;
|
|
|
|
|
|
#ifdef SUN3_SCSI_DEBUG
|
|
printk("scsi_intr csr %x\n", csr);
|
|
#endif
|
|
|
|
if(csr & ~CSR_GOOD) {
|
|
if(csr & CSR_DMA_BUSERR) {
|
|
printk("scsi%d: bus error in dma\n", default_instance->host_no);
|
|
#ifdef SUN3_SCSI_DEBUG
|
|
printk("scsi: residual %x count %x addr %p dmaaddr %x\n",
|
|
dregs->fifo_count,
|
|
dregs->dma_count_lo | (dregs->dma_count_hi << 16),
|
|
sun3_dma_orig_addr,
|
|
dregs->dma_addr_lo | (dregs->dma_addr_hi << 16));
|
|
#endif
|
|
}
|
|
|
|
if(csr & CSR_DMA_CONFLICT) {
|
|
printk("scsi%d: dma conflict\n", default_instance->host_no);
|
|
}
|
|
handled = 1;
|
|
}
|
|
|
|
if(csr & (CSR_SDB_INT | CSR_DMA_INT)) {
|
|
NCR5380_intr(irq, dummy, fp);
|
|
handled = 1;
|
|
}
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
/*
|
|
* Debug stuff - to be called on NMI, or sysrq key. Use at your own risk;
|
|
* reentering NCR5380_print_status seems to have ugly side effects
|
|
*/
|
|
|
|
/* this doesn't seem to get used at all -- sam */
|
|
#if 0
|
|
void sun3_sun3_debug (void)
|
|
{
|
|
unsigned long flags;
|
|
NCR5380_local_declare();
|
|
|
|
if (default_instance) {
|
|
local_irq_save(flags);
|
|
NCR5380_print_status(default_instance);
|
|
local_irq_restore(flags);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
|
|
/* sun3scsi_dma_setup() -- initialize the dma controller for a read/write */
|
|
static unsigned long sun3scsi_dma_setup(void *data, unsigned long count, int write_flag)
|
|
{
|
|
void *addr;
|
|
|
|
if(sun3_dma_orig_addr != NULL)
|
|
dvma_unmap(sun3_dma_orig_addr);
|
|
|
|
// addr = sun3_dvma_page((unsigned long)data, (unsigned long)dmabuf);
|
|
addr = (void *)dvma_map_vme((unsigned long) data, count);
|
|
|
|
sun3_dma_orig_addr = addr;
|
|
sun3_dma_orig_count = count;
|
|
|
|
#ifdef SUN3_SCSI_DEBUG
|
|
printk("scsi: dma_setup addr %p count %x\n", addr, count);
|
|
#endif
|
|
|
|
// dregs->fifo_count = 0;
|
|
#if 0
|
|
/* reset fifo */
|
|
dregs->csr &= ~CSR_FIFO;
|
|
dregs->csr |= CSR_FIFO;
|
|
#endif
|
|
/* set direction */
|
|
if(write_flag)
|
|
dregs->csr |= CSR_SEND;
|
|
else
|
|
dregs->csr &= ~CSR_SEND;
|
|
|
|
/* reset fifo */
|
|
// dregs->csr &= ~CSR_FIFO;
|
|
// dregs->csr |= CSR_FIFO;
|
|
|
|
dregs->csr |= CSR_PACK_ENABLE;
|
|
|
|
dregs->dma_addr_hi = ((unsigned long)addr >> 16);
|
|
dregs->dma_addr_lo = ((unsigned long)addr & 0xffff);
|
|
|
|
dregs->dma_count_hi = 0;
|
|
dregs->dma_count_lo = 0;
|
|
dregs->fifo_count_hi = 0;
|
|
dregs->fifo_count = 0;
|
|
|
|
#ifdef SUN3_SCSI_DEBUG
|
|
printk("scsi: dma_setup done csr %x\n", dregs->csr);
|
|
#endif
|
|
return count;
|
|
|
|
}
|
|
|
|
static inline unsigned long sun3scsi_dma_residual(struct Scsi_Host *instance)
|
|
{
|
|
return last_residual;
|
|
}
|
|
|
|
static inline unsigned long sun3scsi_dma_xfer_len(unsigned long wanted, Scsi_Cmnd *cmd,
|
|
int write_flag)
|
|
{
|
|
if(cmd->request->flags & REQ_CMD)
|
|
return wanted;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static int sun3scsi_dma_start(unsigned long count, char *data)
|
|
{
|
|
|
|
unsigned short csr;
|
|
|
|
csr = dregs->csr;
|
|
#ifdef SUN3_SCSI_DEBUG
|
|
printk("scsi: dma_start data %p count %x csr %x fifo %x\n", data, count, csr, dregs->fifo_count);
|
|
#endif
|
|
|
|
dregs->dma_count_hi = (sun3_dma_orig_count >> 16);
|
|
dregs->dma_count_lo = (sun3_dma_orig_count & 0xffff);
|
|
|
|
dregs->fifo_count_hi = (sun3_dma_orig_count >> 16);
|
|
dregs->fifo_count = (sun3_dma_orig_count & 0xffff);
|
|
|
|
// if(!(csr & CSR_DMA_ENABLE))
|
|
// dregs->csr |= CSR_DMA_ENABLE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* clean up after our dma is done */
|
|
static int sun3scsi_dma_finish(int write_flag)
|
|
{
|
|
unsigned short fifo;
|
|
int ret = 0;
|
|
|
|
sun3_dma_active = 0;
|
|
|
|
dregs->csr &= ~CSR_DMA_ENABLE;
|
|
|
|
fifo = dregs->fifo_count;
|
|
if(write_flag) {
|
|
if((fifo > 0) && (fifo < sun3_dma_orig_count))
|
|
fifo++;
|
|
}
|
|
|
|
last_residual = fifo;
|
|
#ifdef SUN3_SCSI_DEBUG
|
|
printk("scsi: residual %x total %x\n", fifo, sun3_dma_orig_count);
|
|
#endif
|
|
/* empty bytes from the fifo which didn't make it */
|
|
if((!write_flag) && (dregs->csr & CSR_LEFT)) {
|
|
unsigned char *vaddr;
|
|
|
|
#ifdef SUN3_SCSI_DEBUG
|
|
printk("scsi: got left over bytes\n");
|
|
#endif
|
|
|
|
vaddr = (unsigned char *)dvma_vmetov(sun3_dma_orig_addr);
|
|
|
|
vaddr += (sun3_dma_orig_count - fifo);
|
|
vaddr--;
|
|
|
|
switch(dregs->csr & CSR_LEFT) {
|
|
case CSR_LEFT_3:
|
|
*vaddr = (dregs->bpack_lo & 0xff00) >> 8;
|
|
vaddr--;
|
|
|
|
case CSR_LEFT_2:
|
|
*vaddr = (dregs->bpack_hi & 0x00ff);
|
|
vaddr--;
|
|
|
|
case CSR_LEFT_1:
|
|
*vaddr = (dregs->bpack_hi & 0xff00) >> 8;
|
|
break;
|
|
}
|
|
|
|
|
|
}
|
|
|
|
dvma_unmap(sun3_dma_orig_addr);
|
|
sun3_dma_orig_addr = NULL;
|
|
|
|
dregs->dma_addr_hi = 0;
|
|
dregs->dma_addr_lo = 0;
|
|
dregs->dma_count_hi = 0;
|
|
dregs->dma_count_lo = 0;
|
|
|
|
dregs->fifo_count = 0;
|
|
dregs->fifo_count_hi = 0;
|
|
|
|
dregs->csr &= ~CSR_SEND;
|
|
|
|
// dregs->csr |= CSR_DMA_ENABLE;
|
|
|
|
#if 0
|
|
/* reset fifo */
|
|
dregs->csr &= ~CSR_FIFO;
|
|
dregs->csr |= CSR_FIFO;
|
|
#endif
|
|
sun3_dma_setup_done = NULL;
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
#include "sun3_NCR5380.c"
|
|
|
|
static Scsi_Host_Template driver_template = {
|
|
.name = SUN3_SCSI_NAME,
|
|
.detect = sun3scsi_detect,
|
|
.release = sun3scsi_release,
|
|
.info = sun3scsi_info,
|
|
.queuecommand = sun3scsi_queue_command,
|
|
.eh_abort_handler = sun3scsi_abort,
|
|
.eh_bus_reset_handler = sun3scsi_bus_reset,
|
|
.can_queue = CAN_QUEUE,
|
|
.this_id = 7,
|
|
.sg_tablesize = SG_TABLESIZE,
|
|
.cmd_per_lun = CMD_PER_LUN,
|
|
.use_clustering = DISABLE_CLUSTERING
|
|
};
|
|
|
|
|
|
#include "scsi_module.c"
|
|
|