linux/Documentation/admin-guide/tainted-kernels.rst

Tainted kernels
---------------

The kernel will mark itself as 'tainted' when something occurs that might be
relevant later when investigating problems. Don't worry too much about this,
most of the time it's not a problem to run a tainted kernel; the information is
mainly of interest once someone wants to investigate some problem, as its real
cause might be the event that got the kernel tainted. That's why bug reports
from tainted kernels will often be ignored by developers, hence try to reproduce
problems with an untainted kernel.

Note the kernel will remain tainted even after you undo what caused the taint
(i.e. unload a proprietary kernel module), to indicate the kernel remains not
trustworthy. That's also why the kernel will print the tainted state when it
notices an internal problem (a 'kernel bug'), a recoverable error
('kernel oops') or a non-recoverable error ('kernel panic') and writes debug
information about this to the logs ``dmesg`` outputs. It's also possible to
check the tainted state at runtime through a file in ``/proc/``.


Tainted flag in bugs, oops or panics messages
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

You find the tainted state near the top in a line starting with 'CPU:'; if or
why the kernel was tainted is shown after the Process ID ('PID:') and a shortened
name of the command ('Comm:') that triggered the event::

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
	Oops: 0002 [#1] SMP PTI
	CPU: 0 PID: 4424 Comm: insmod Tainted: P        W  O      4.20.0-0.rc6.fc30 #1
	Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
	RIP: 0010:my_oops_init+0x13/0x1000 [kpanic]
	[...]

You'll find a 'Not tainted: ' there if the kernel was not tainted at the
time of the event; if it was, then it will print 'Tainted: ' and characters
either letters or blanks. In above example it looks like this::

	Tainted: P        W  O

The meaning of those characters is explained in the table below. In tis case
the kernel got tainted earlier because a proprietary Module (``P``) was loaded,
a warning occurred (``W``), and an externally-built module was loaded (``O``).
To decode other letters use the table below.


Decoding tainted state at runtime
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

At runtime, you can query the tainted state by reading
``cat /proc/sys/kernel/tainted``. If that returns ``0``, the kernel is not
tainted; any other number indicates the reasons why it is. The easiest way to
decode that number is the script ``tools/debugging/kernel-chktaint``, which your
distribution might ship as part of a package called ``linux-tools`` or
``kernel-tools``; if it doesn't you can download the script from
`git.kernel.org <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/plain/tools/debugging/kernel-chktaint>`_
and execute it with ``sh kernel-chktaint``, which would print something like
this on the machine that had the statements in the logs that were quoted earlier::

	Kernel is Tainted for following reasons:
	 * Proprietary module was loaded (#0)
	 * Kernel issued warning (#9)
	 * Externally-built ('out-of-tree') module was loaded  (#12)
	See Documentation/admin-guide/tainted-kernels.rst in the the Linux kernel or
	 https://www.kernel.org/doc/html/latest/admin-guide/tainted-kernels.html for
	 a more details explanation of the various taint flags.
	Raw taint value as int/string: 4609/'P        W  O     '

You can try to decode the number yourself. That's easy if there was only one
reason that got your kernel tainted, as in this case you can find the number
with the table below. If there were multiple reasons you need to decode the
number, as it is a bitfield, where each bit indicates the absence or presence of
a particular type of taint. It's best to leave that to the aforementioned
script, but if you need something quick you can use this shell command to check
which bits are set::

	$ for i in $(seq 18); do echo $(($i-1)) $(($(cat /proc/sys/kernel/tainted)>>($i-1)&1));done

Table for decoding tainted state
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

===  ===  ======  ========================================================
Bit  Log  Number  Reason that got the kernel tainted
===  ===  ======  ========================================================
  0  G/P       1  proprietary module was loaded
  1  _/F       2  module was force loaded
  2  _/S       4  SMP kernel oops on an officially SMP incapable processor
  3  _/R       8  module was force unloaded
  4  _/M      16  processor reported a Machine Check Exception (MCE)
  5  _/B      32  bad page referenced or some unexpected page flags
  6  _/U      64  taint requested by userspace application
  7  _/D     128  kernel died recently, i.e. there was an OOPS or BUG
  8  _/A     256  ACPI table overridden by user
  9  _/W     512  kernel issued warning
 10  _/C    1024  staging driver was loaded
 11  _/I    2048  workaround for bug in platform firmware applied
 12  _/O    4096  externally-built ("out-of-tree") module was loaded
 13  _/E    8192  unsigned module was loaded
 14  _/L   16384  soft lockup occurred
 15  _/K   32768  kernel has been live patched
 16  _/X   65536  auxiliary taint, defined for and used by distros
 17  _/T  131072  kernel was built with the struct randomization plugin
===  ===  ======  ========================================================

Note: The character ``_`` is representing a blank in this table to make reading
easier.

More detailed explanation for tainting
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 0)  ``G`` if all modules loaded have a GPL or compatible license, ``P`` if
     any proprietary module has been loaded.  Modules without a
     MODULE_LICENSE or with a MODULE_LICENSE that is not recognised by
     insmod as GPL compatible are assumed to be proprietary.

 1)  ``F`` if any module was force loaded by ``insmod -f``, ``' '`` if all
     modules were loaded normally.

 2)  ``S`` if the oops occurred on an SMP kernel running on hardware that
     hasn't been certified as safe to run multiprocessor.
     Currently this occurs only on various Athlons that are not
     SMP capable.

 3)  ``R`` if a module was force unloaded by ``rmmod -f``, ``' '`` if all
     modules were unloaded normally.

 4)  ``M`` if any processor has reported a Machine Check Exception,
     ``' '`` if no Machine Check Exceptions have occurred.

 5)  ``B`` If a page-release function has found a bad page reference or some
     unexpected page flags. This indicates a hardware problem or a kernel bug;
     there should be other information in the log indicating why this tainting
     occured.

 6)  ``U`` if a user or user application specifically requested that the
     Tainted flag be set, ``' '`` otherwise.

 7)  ``D`` if the kernel has died recently, i.e. there was an OOPS or BUG.

 8)  ``A`` if an ACPI table has been overridden.

 9)  ``W`` if a warning has previously been issued by the kernel.
     (Though some warnings may set more specific taint flags.)

 10) ``C`` if a staging driver has been loaded.

 11) ``I`` if the kernel is working around a severe bug in the platform
     firmware (BIOS or similar).

 12) ``O`` if an externally-built ("out-of-tree") module has been loaded.

 13) ``E`` if an unsigned module has been loaded in a kernel supporting
     module signature.

 14) ``L`` if a soft lockup has previously occurred on the system.

 15) ``K`` if the kernel has been live patched.

 16) ``X`` Auxiliary taint, defined for and used by Linux distributors.

 17) ``T`` Kernel was build with the randstruct plugin, which can intentionally
     produce extremely unusual kernel structure layouts (even performance
     pathological ones), which is important to know when debugging. Set at
     build time.