mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-28 13:34:38 +08:00
e1c69efc52
In case the optional dr_mode property isn't set in the dwc3 nodes the the controller will go into OTG mode if both USB host and USB gadget functionality are enabled in the kernel configuration. Unfortunately this results in USB not working on exynos5420-peach-pit and exynos5800-peach-pi with such a kernel configuration unless manually change the mode. To resolve that explicitly configure the dual role mode as host. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
902 lines
21 KiB
Plaintext
902 lines
21 KiB
Plaintext
/*
|
|
* SAMSUNG EXYNOS5420 SoC device tree source
|
|
*
|
|
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* SAMSUNG EXYNOS54200 SoC device nodes are listed in this file.
|
|
* EXYNOS5420 based board files can include this file and provide
|
|
* values for board specfic bindings.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/exynos5420.h>
|
|
#include "exynos5.dtsi"
|
|
#include "exynos5420-pinctrl.dtsi"
|
|
|
|
#include <dt-bindings/clock/exynos-audss-clk.h>
|
|
|
|
/ {
|
|
compatible = "samsung,exynos5420", "samsung,exynos5";
|
|
|
|
aliases {
|
|
mshc0 = &mmc_0;
|
|
mshc1 = &mmc_1;
|
|
mshc2 = &mmc_2;
|
|
pinctrl0 = &pinctrl_0;
|
|
pinctrl1 = &pinctrl_1;
|
|
pinctrl2 = &pinctrl_2;
|
|
pinctrl3 = &pinctrl_3;
|
|
pinctrl4 = &pinctrl_4;
|
|
i2c0 = &i2c_0;
|
|
i2c1 = &i2c_1;
|
|
i2c2 = &i2c_2;
|
|
i2c3 = &i2c_3;
|
|
i2c4 = &hsi2c_4;
|
|
i2c5 = &hsi2c_5;
|
|
i2c6 = &hsi2c_6;
|
|
i2c7 = &hsi2c_7;
|
|
i2c8 = &hsi2c_8;
|
|
i2c9 = &hsi2c_9;
|
|
i2c10 = &hsi2c_10;
|
|
gsc0 = &gsc_0;
|
|
gsc1 = &gsc_1;
|
|
spi0 = &spi_0;
|
|
spi1 = &spi_1;
|
|
spi2 = &spi_2;
|
|
usbdrdphy0 = &usbdrd_phy0;
|
|
usbdrdphy1 = &usbdrd_phy1;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0x0>;
|
|
clock-frequency = <1800000000>;
|
|
cci-control-port = <&cci_control1>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0x1>;
|
|
clock-frequency = <1800000000>;
|
|
cci-control-port = <&cci_control1>;
|
|
};
|
|
|
|
cpu2: cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0x2>;
|
|
clock-frequency = <1800000000>;
|
|
cci-control-port = <&cci_control1>;
|
|
};
|
|
|
|
cpu3: cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0x3>;
|
|
clock-frequency = <1800000000>;
|
|
cci-control-port = <&cci_control1>;
|
|
};
|
|
|
|
cpu4: cpu@100 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x100>;
|
|
clock-frequency = <1000000000>;
|
|
cci-control-port = <&cci_control0>;
|
|
};
|
|
|
|
cpu5: cpu@101 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x101>;
|
|
clock-frequency = <1000000000>;
|
|
cci-control-port = <&cci_control0>;
|
|
};
|
|
|
|
cpu6: cpu@102 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x102>;
|
|
clock-frequency = <1000000000>;
|
|
cci-control-port = <&cci_control0>;
|
|
};
|
|
|
|
cpu7: cpu@103 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x103>;
|
|
clock-frequency = <1000000000>;
|
|
cci-control-port = <&cci_control0>;
|
|
};
|
|
};
|
|
|
|
cci@10d20000 {
|
|
compatible = "arm,cci-400";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x10d20000 0x1000>;
|
|
ranges = <0x0 0x10d20000 0x6000>;
|
|
|
|
cci_control0: slave-if@4000 {
|
|
compatible = "arm,cci-400-ctrl-if";
|
|
interface-type = "ace";
|
|
reg = <0x4000 0x1000>;
|
|
};
|
|
cci_control1: slave-if@5000 {
|
|
compatible = "arm,cci-400-ctrl-if";
|
|
interface-type = "ace";
|
|
reg = <0x5000 0x1000>;
|
|
};
|
|
};
|
|
|
|
sysram@02020000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x02020000 0x54000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x02020000 0x54000>;
|
|
|
|
smp-sysram@0 {
|
|
compatible = "samsung,exynos4210-sysram";
|
|
reg = <0x0 0x1000>;
|
|
};
|
|
|
|
smp-sysram@53000 {
|
|
compatible = "samsung,exynos4210-sysram-ns";
|
|
reg = <0x53000 0x1000>;
|
|
};
|
|
};
|
|
|
|
clock: clock-controller@10010000 {
|
|
compatible = "samsung,exynos5420-clock";
|
|
reg = <0x10010000 0x30000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
clock_audss: audss-clock-controller@3810000 {
|
|
compatible = "samsung,exynos5420-audss-clock";
|
|
reg = <0x03810000 0x0C>;
|
|
#clock-cells = <1>;
|
|
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
|
|
<&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
|
|
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
|
|
};
|
|
|
|
mfc: codec@11000000 {
|
|
compatible = "samsung,mfc-v7";
|
|
reg = <0x11000000 0x10000>;
|
|
interrupts = <0 96 0>;
|
|
clocks = <&clock CLK_MFC>;
|
|
clock-names = "mfc";
|
|
samsung,power-domain = <&mfc_pd>;
|
|
};
|
|
|
|
mmc_0: mmc@12200000 {
|
|
compatible = "samsung,exynos5420-dw-mshc-smu";
|
|
interrupts = <0 75 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x12200000 0x2000>;
|
|
clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x40>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc_1: mmc@12210000 {
|
|
compatible = "samsung,exynos5420-dw-mshc-smu";
|
|
interrupts = <0 76 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x12210000 0x2000>;
|
|
clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x40>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc_2: mmc@12220000 {
|
|
compatible = "samsung,exynos5420-dw-mshc";
|
|
interrupts = <0 77 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x12220000 0x1000>;
|
|
clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x40>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mct: mct@101C0000 {
|
|
compatible = "samsung,exynos4210-mct";
|
|
reg = <0x101C0000 0x800>;
|
|
interrupt-controller;
|
|
#interrups-cells = <1>;
|
|
interrupt-parent = <&mct_map>;
|
|
interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
|
|
<8>, <9>, <10>, <11>;
|
|
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
|
|
clock-names = "fin_pll", "mct";
|
|
|
|
mct_map: mct-map {
|
|
#interrupt-cells = <1>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
interrupt-map = <0 &combiner 23 3>,
|
|
<1 &combiner 23 4>,
|
|
<2 &combiner 25 2>,
|
|
<3 &combiner 25 3>,
|
|
<4 &gic 0 120 0>,
|
|
<5 &gic 0 121 0>,
|
|
<6 &gic 0 122 0>,
|
|
<7 &gic 0 123 0>,
|
|
<8 &gic 0 128 0>,
|
|
<9 &gic 0 129 0>,
|
|
<10 &gic 0 130 0>,
|
|
<11 &gic 0 131 0>;
|
|
};
|
|
};
|
|
|
|
gsc_pd: power-domain@10044000 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10044000 0x20>;
|
|
};
|
|
|
|
isp_pd: power-domain@10044020 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10044020 0x20>;
|
|
};
|
|
|
|
mfc_pd: power-domain@10044060 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10044060 0x20>;
|
|
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
|
|
<&clock CLK_MOUT_USER_ACLK333>;
|
|
clock-names = "oscclk", "pclk0", "clk0";
|
|
};
|
|
|
|
msc_pd: power-domain@10044120 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10044120 0x20>;
|
|
};
|
|
|
|
pinctrl_0: pinctrl@13400000 {
|
|
compatible = "samsung,exynos5420-pinctrl";
|
|
reg = <0x13400000 0x1000>;
|
|
interrupts = <0 45 0>;
|
|
|
|
wakeup-interrupt-controller {
|
|
compatible = "samsung,exynos4210-wakeup-eint";
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <0 32 0>;
|
|
};
|
|
};
|
|
|
|
pinctrl_1: pinctrl@13410000 {
|
|
compatible = "samsung,exynos5420-pinctrl";
|
|
reg = <0x13410000 0x1000>;
|
|
interrupts = <0 78 0>;
|
|
};
|
|
|
|
pinctrl_2: pinctrl@14000000 {
|
|
compatible = "samsung,exynos5420-pinctrl";
|
|
reg = <0x14000000 0x1000>;
|
|
interrupts = <0 46 0>;
|
|
};
|
|
|
|
pinctrl_3: pinctrl@14010000 {
|
|
compatible = "samsung,exynos5420-pinctrl";
|
|
reg = <0x14010000 0x1000>;
|
|
interrupts = <0 50 0>;
|
|
};
|
|
|
|
pinctrl_4: pinctrl@03860000 {
|
|
compatible = "samsung,exynos5420-pinctrl";
|
|
reg = <0x03860000 0x1000>;
|
|
interrupts = <0 47 0>;
|
|
};
|
|
|
|
rtc: rtc@101E0000 {
|
|
clocks = <&clock CLK_RTC>;
|
|
clock-names = "rtc";
|
|
status = "disabled";
|
|
};
|
|
|
|
amba {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "arm,amba-bus";
|
|
interrupt-parent = <&gic>;
|
|
ranges;
|
|
|
|
adma: adma@03880000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x03880000 0x1000>;
|
|
interrupts = <0 110 0>;
|
|
clocks = <&clock_audss EXYNOS_ADMA>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <6>;
|
|
#dma-requests = <16>;
|
|
};
|
|
|
|
pdma0: pdma@121A0000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x121A0000 0x1000>;
|
|
interrupts = <0 34 0>;
|
|
clocks = <&clock CLK_PDMA0>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <32>;
|
|
};
|
|
|
|
pdma1: pdma@121B0000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x121B0000 0x1000>;
|
|
interrupts = <0 35 0>;
|
|
clocks = <&clock CLK_PDMA1>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <32>;
|
|
};
|
|
|
|
mdma0: mdma@10800000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x10800000 0x1000>;
|
|
interrupts = <0 33 0>;
|
|
clocks = <&clock CLK_MDMA0>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <1>;
|
|
};
|
|
|
|
mdma1: mdma@11C10000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x11C10000 0x1000>;
|
|
interrupts = <0 124 0>;
|
|
clocks = <&clock CLK_MDMA1>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <1>;
|
|
/*
|
|
* MDMA1 can support both secure and non-secure
|
|
* AXI transactions. When this is enabled in the kernel
|
|
* for boards that run in secure mode, we are getting
|
|
* imprecise external aborts causing the kernel to oops.
|
|
*/
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
i2s0: i2s@03830000 {
|
|
compatible = "samsung,exynos5420-i2s";
|
|
reg = <0x03830000 0x100>;
|
|
dmas = <&adma 0
|
|
&adma 2
|
|
&adma 1>;
|
|
dma-names = "tx", "rx", "tx-sec";
|
|
clocks = <&clock_audss EXYNOS_I2S_BUS>,
|
|
<&clock_audss EXYNOS_I2S_BUS>,
|
|
<&clock_audss EXYNOS_SCLK_I2S>;
|
|
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
|
|
samsung,idma-addr = <0x03000000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s0_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s1: i2s@12D60000 {
|
|
compatible = "samsung,exynos5420-i2s";
|
|
reg = <0x12D60000 0x100>;
|
|
dmas = <&pdma1 12
|
|
&pdma1 11>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
|
|
clock-names = "iis", "i2s_opclk0";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s1_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s2: i2s@12D70000 {
|
|
compatible = "samsung,exynos5420-i2s";
|
|
reg = <0x12D70000 0x100>;
|
|
dmas = <&pdma0 12
|
|
&pdma0 11>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
|
|
clock-names = "iis", "i2s_opclk0";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s2_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_0: spi@12d20000 {
|
|
compatible = "samsung,exynos4210-spi";
|
|
reg = <0x12d20000 0x100>;
|
|
interrupts = <0 68 0>;
|
|
dmas = <&pdma0 5
|
|
&pdma0 4>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_bus>;
|
|
clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_1: spi@12d30000 {
|
|
compatible = "samsung,exynos4210-spi";
|
|
reg = <0x12d30000 0x100>;
|
|
interrupts = <0 69 0>;
|
|
dmas = <&pdma1 5
|
|
&pdma1 4>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi1_bus>;
|
|
clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_2: spi@12d40000 {
|
|
compatible = "samsung,exynos4210-spi";
|
|
reg = <0x12d40000 0x100>;
|
|
interrupts = <0 70 0>;
|
|
dmas = <&pdma0 7
|
|
&pdma0 6>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi2_bus>;
|
|
clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart_0: serial@12C00000 {
|
|
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
};
|
|
|
|
uart_1: serial@12C10000 {
|
|
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
};
|
|
|
|
uart_2: serial@12C20000 {
|
|
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
};
|
|
|
|
uart_3: serial@12C30000 {
|
|
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
};
|
|
|
|
pwm: pwm@12dd0000 {
|
|
compatible = "samsung,exynos4210-pwm";
|
|
reg = <0x12dd0000 0x100>;
|
|
samsung,pwm-outputs = <0>, <1>, <2>, <3>;
|
|
#pwm-cells = <3>;
|
|
clocks = <&clock CLK_PWM>;
|
|
clock-names = "timers";
|
|
};
|
|
|
|
dp_phy: video-phy@10040728 {
|
|
compatible = "samsung,exynos5250-dp-video-phy";
|
|
reg = <0x10040728 4>;
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
dp: dp-controller@145B0000 {
|
|
clocks = <&clock CLK_DP1>;
|
|
clock-names = "dp";
|
|
phys = <&dp_phy>;
|
|
phy-names = "dp";
|
|
};
|
|
|
|
mipi_phy: video-phy@10040714 {
|
|
compatible = "samsung,s5pv210-mipi-video-phy";
|
|
reg = <0x10040714 12>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
dsi@14500000 {
|
|
compatible = "samsung,exynos5410-mipi-dsi";
|
|
reg = <0x14500000 0x10000>;
|
|
interrupts = <0 82 0>;
|
|
phys = <&mipi_phy 1>;
|
|
phy-names = "dsim";
|
|
clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
|
|
clock-names = "bus_clk", "pll_clk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
fimd: fimd@14400000 {
|
|
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
|
|
clock-names = "sclk_fimd", "fimd";
|
|
};
|
|
|
|
adc: adc@12D10000 {
|
|
compatible = "samsung,exynos-adc-v2";
|
|
reg = <0x12D10000 0x100>, <0x10040720 0x4>;
|
|
interrupts = <0 106 0>;
|
|
clocks = <&clock CLK_TSADC>;
|
|
clock-names = "adc";
|
|
#io-channel-cells = <1>;
|
|
io-channel-ranges;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_0: i2c@12C60000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12C60000 0x100>;
|
|
interrupts = <0 56 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C0>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_1: i2c@12C70000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12C70000 0x100>;
|
|
interrupts = <0 57 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C1>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_2: i2c@12C80000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12C80000 0x100>;
|
|
interrupts = <0 58 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C2>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_3: i2c@12C90000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12C90000 0x100>;
|
|
interrupts = <0 59 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C3>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c3_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_4: i2c@12CA0000 {
|
|
compatible = "samsung,exynos5-hsi2c";
|
|
reg = <0x12CA0000 0x1000>;
|
|
interrupts = <0 60 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c4_hs_bus>;
|
|
clocks = <&clock CLK_USI0>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_5: i2c@12CB0000 {
|
|
compatible = "samsung,exynos5-hsi2c";
|
|
reg = <0x12CB0000 0x1000>;
|
|
interrupts = <0 61 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c5_hs_bus>;
|
|
clocks = <&clock CLK_USI1>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_6: i2c@12CC0000 {
|
|
compatible = "samsung,exynos5-hsi2c";
|
|
reg = <0x12CC0000 0x1000>;
|
|
interrupts = <0 62 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c6_hs_bus>;
|
|
clocks = <&clock CLK_USI2>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_7: i2c@12CD0000 {
|
|
compatible = "samsung,exynos5-hsi2c";
|
|
reg = <0x12CD0000 0x1000>;
|
|
interrupts = <0 63 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c7_hs_bus>;
|
|
clocks = <&clock CLK_USI3>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_8: i2c@12E00000 {
|
|
compatible = "samsung,exynos5-hsi2c";
|
|
reg = <0x12E00000 0x1000>;
|
|
interrupts = <0 87 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c8_hs_bus>;
|
|
clocks = <&clock CLK_USI4>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_9: i2c@12E10000 {
|
|
compatible = "samsung,exynos5-hsi2c";
|
|
reg = <0x12E10000 0x1000>;
|
|
interrupts = <0 88 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c9_hs_bus>;
|
|
clocks = <&clock CLK_USI5>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_10: i2c@12E20000 {
|
|
compatible = "samsung,exynos5-hsi2c";
|
|
reg = <0x12E20000 0x1000>;
|
|
interrupts = <0 203 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c10_hs_bus>;
|
|
clocks = <&clock CLK_USI6>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hdmi: hdmi@14530000 {
|
|
compatible = "samsung,exynos5420-hdmi";
|
|
reg = <0x14530000 0x70000>;
|
|
interrupts = <0 95 0>;
|
|
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
|
|
<&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
|
|
<&clock CLK_MOUT_HDMI>;
|
|
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
|
|
"sclk_hdmiphy", "mout_hdmi";
|
|
phy = <&hdmiphy>;
|
|
samsung,syscon-phandle = <&pmu_system_controller>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hdmiphy: hdmiphy@145D0000 {
|
|
reg = <0x145D0000 0x20>;
|
|
};
|
|
|
|
mixer: mixer@14450000 {
|
|
compatible = "samsung,exynos5420-mixer";
|
|
reg = <0x14450000 0x10000>;
|
|
interrupts = <0 94 0>;
|
|
clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
|
|
clock-names = "mixer", "sclk_hdmi";
|
|
};
|
|
|
|
gsc_0: video-scaler@13e00000 {
|
|
compatible = "samsung,exynos5-gsc";
|
|
reg = <0x13e00000 0x1000>;
|
|
interrupts = <0 85 0>;
|
|
clocks = <&clock CLK_GSCL0>;
|
|
clock-names = "gscl";
|
|
samsung,power-domain = <&gsc_pd>;
|
|
};
|
|
|
|
gsc_1: video-scaler@13e10000 {
|
|
compatible = "samsung,exynos5-gsc";
|
|
reg = <0x13e10000 0x1000>;
|
|
interrupts = <0 86 0>;
|
|
clocks = <&clock CLK_GSCL1>;
|
|
clock-names = "gscl";
|
|
samsung,power-domain = <&gsc_pd>;
|
|
};
|
|
|
|
pmu_system_controller: system-controller@10040000 {
|
|
compatible = "samsung,exynos5420-pmu", "syscon";
|
|
reg = <0x10040000 0x5000>;
|
|
clock-names = "clkout16";
|
|
clocks = <&clock CLK_FIN_PLL>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
sysreg_system_controller: syscon@10050000 {
|
|
compatible = "samsung,exynos5-sysreg", "syscon";
|
|
reg = <0x10050000 0x5000>;
|
|
};
|
|
|
|
tmu_cpu0: tmu@10060000 {
|
|
compatible = "samsung,exynos5420-tmu";
|
|
reg = <0x10060000 0x100>;
|
|
interrupts = <0 65 0>;
|
|
clocks = <&clock CLK_TMU>;
|
|
clock-names = "tmu_apbif";
|
|
};
|
|
|
|
tmu_cpu1: tmu@10064000 {
|
|
compatible = "samsung,exynos5420-tmu";
|
|
reg = <0x10064000 0x100>;
|
|
interrupts = <0 183 0>;
|
|
clocks = <&clock CLK_TMU>;
|
|
clock-names = "tmu_apbif";
|
|
};
|
|
|
|
tmu_cpu2: tmu@10068000 {
|
|
compatible = "samsung,exynos5420-tmu-ext-triminfo";
|
|
reg = <0x10068000 0x100>, <0x1006c000 0x4>;
|
|
interrupts = <0 184 0>;
|
|
clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
|
|
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
|
|
};
|
|
|
|
tmu_cpu3: tmu@1006c000 {
|
|
compatible = "samsung,exynos5420-tmu-ext-triminfo";
|
|
reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
|
|
interrupts = <0 185 0>;
|
|
clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
|
|
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
|
|
};
|
|
|
|
tmu_gpu: tmu@100a0000 {
|
|
compatible = "samsung,exynos5420-tmu-ext-triminfo";
|
|
reg = <0x100a0000 0x100>, <0x10068000 0x4>;
|
|
interrupts = <0 215 0>;
|
|
clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
|
|
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
|
|
};
|
|
|
|
watchdog: watchdog@101D0000 {
|
|
compatible = "samsung,exynos5420-wdt";
|
|
reg = <0x101D0000 0x100>;
|
|
interrupts = <0 42 0>;
|
|
clocks = <&clock CLK_WDT>;
|
|
clock-names = "watchdog";
|
|
samsung,syscon-phandle = <&pmu_system_controller>;
|
|
};
|
|
|
|
sss: sss@10830000 {
|
|
compatible = "samsung,exynos4210-secss";
|
|
reg = <0x10830000 0x10000>;
|
|
interrupts = <0 112 0>;
|
|
clocks = <&clock CLK_SSS>;
|
|
clock-names = "secss";
|
|
};
|
|
|
|
usbdrd3_0: usb@12000000 {
|
|
compatible = "samsung,exynos5250-dwusb3";
|
|
clocks = <&clock CLK_USBD300>;
|
|
clock-names = "usbdrd30";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
usbdrd_dwc3_0: dwc3 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x12000000 0x10000>;
|
|
interrupts = <0 72 0>;
|
|
phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
};
|
|
};
|
|
|
|
usbdrd_phy0: phy@12100000 {
|
|
compatible = "samsung,exynos5420-usbdrd-phy";
|
|
reg = <0x12100000 0x100>;
|
|
clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
|
|
clock-names = "phy", "ref";
|
|
samsung,pmu-syscon = <&pmu_system_controller>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
usbdrd3_1: usb@12400000 {
|
|
compatible = "samsung,exynos5250-dwusb3";
|
|
clocks = <&clock CLK_USBD301>;
|
|
clock-names = "usbdrd30";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
usbdrd_dwc3_1: dwc3 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x12400000 0x10000>;
|
|
interrupts = <0 73 0>;
|
|
phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
};
|
|
};
|
|
|
|
usbdrd_phy1: phy@12500000 {
|
|
compatible = "samsung,exynos5420-usbdrd-phy";
|
|
reg = <0x12500000 0x100>;
|
|
clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
|
|
clock-names = "phy", "ref";
|
|
samsung,pmu-syscon = <&pmu_system_controller>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
usbhost2: usb@12110000 {
|
|
compatible = "samsung,exynos4210-ehci";
|
|
reg = <0x12110000 0x100>;
|
|
interrupts = <0 71 0>;
|
|
|
|
clocks = <&clock CLK_USBH20>;
|
|
clock-names = "usbhost";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
phys = <&usb2_phy 1>;
|
|
};
|
|
};
|
|
|
|
usbhost1: usb@12120000 {
|
|
compatible = "samsung,exynos4210-ohci";
|
|
reg = <0x12120000 0x100>;
|
|
interrupts = <0 71 0>;
|
|
|
|
clocks = <&clock CLK_USBH20>;
|
|
clock-names = "usbhost";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
phys = <&usb2_phy 1>;
|
|
};
|
|
};
|
|
|
|
usb2_phy: phy@12130000 {
|
|
compatible = "samsung,exynos5250-usb2-phy";
|
|
reg = <0x12130000 0x100>;
|
|
clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
|
|
clock-names = "phy", "ref";
|
|
#phy-cells = <1>;
|
|
samsung,sysreg-phandle = <&sysreg_system_controller>;
|
|
samsung,pmureg-phandle = <&pmu_system_controller>;
|
|
};
|
|
};
|