Alan Douglas 44d30d6228 phy: cadence: Add driver for Sierra PHY ... Add a Sierra PHY driver with PCIe and USB support. The PHY has multiple lanes, which can be configured into groups, and a generic PHY device is created for each group. There are two resets controlling the overall PHY block, one to enable the APB interface for programming registers, and another to enable the PHY itself. Additionally there are resets for each PHY lane. The PHY can be configured in hardware to read register settings from ROM, or they can be written by the driver. The sequence of operation on startup is to enable the APB bus, write the PHY registers (if required) for each lane group, and then enable the PHY. Each group of lanes can then be individually controlled using the power_on()/ power_off() function for that generic PHY Signed-off-by: Alan Douglas <adouglas@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>		2018-12-12 10:01:38 +05:30
..
allwinner	phy: core: rework phy_set_mode to accept phy mode and submode	2018-12-12 10:01:33 +05:30
amlogic	phy: core: rework phy_set_mode to accept phy mode and submode	2018-12-12 10:01:33 +05:30
broadcom	phy: brcm-sata: Add BCM63138 (DSL) PHY init sequence	2018-09-25 16:10:08 +05:30
cadence	phy: cadence: Add driver for Sierra PHY	2018-12-12 10:01:38 +05:30
hisilicon	phy: add inno-usb2-phy driver for hi3798cv200 SoC	2018-03-16 16:55:29 +05:30
lantiq	phy: lantiq: Fix compile warning	2018-09-26 13:09:39 +05:30
marvell	phy: mvebu-cp110-comphy: convert to use eth phy mode and submode	2018-12-12 10:01:35 +05:30
mediatek	phy: core: rework phy_set_mode to accept phy mode and submode	2018-12-12 10:01:33 +05:30
motorola	gpiolib: Pass array info to get/set array functions	2018-09-13 11:16:54 +02:00
mscc	phy: ocelot-serdes: convert to use eth phy mode and submode	2018-12-12 10:01:35 +05:30
qualcomm	phy: core: rework phy_set_mode to accept phy mode and submode	2018-12-12 10:01:33 +05:30
ralink	phy: add 'depends on HAS_IOMEM' to fix unmet dependency	2018-03-16 13:40:45 +05:30
renesas	phy: renesas: convert to SPDX identifiers	2018-09-26 13:09:41 +05:30
rockchip	phy: rockchip-usb: add usb-uart setup for rk3188	2018-09-25 16:10:13 +05:30
samsung	phy: exynos-mipi-video: Simplify code by using regmap_update_bits()	2018-04-25 10:52:59 +05:30
socionext	phy: uniphier-pcie: Depend on HAS_IOMEM	2018-11-12 16:19:06 +05:30
st	phy: stm32: fix usbphyc static checker and checkpatch warnings	2018-05-20 21:51:25 +05:30
tegra	phy: Convert to using %pOFn instead of device_node.name	2018-09-25 16:10:07 +05:30
ti	phy: core: rework phy_set_mode to accept phy mode and submode	2018-12-12 10:01:33 +05:30
Kconfig	USB/PHY patches for 4.20-rc1	2018-10-26 08:14:13 -07:00
Makefile	USB/PHY patches for 4.20-rc1	2018-10-26 08:14:13 -07:00
phy-core.c	phy: core: rework phy_set_mode to accept phy mode and submode	2018-12-12 10:01:33 +05:30
phy-lpc18xx-usb-otg.c	phy: lpc18xx-usb-otg: error handling in lpc18xx_usb_otg_phy_power_on()	2018-03-16 13:40:42 +05:30
phy-pistachio-usb.c	PHY: Add driver for Pistachio USB2.0 PHY	2015-06-21 21:53:38 +02:00
phy-xgene.c	phy: xgene: rename "enum phy_mode" to "enum xgene_phy_mode"	2016-07-04 17:19:21 +05:30