mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-28 13:34:38 +08:00
44c916d58b
This merge window brings a good size of cleanups on various platforms. Among the bigger ones: * Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have lacked active support for quite a while, and after asking around nobody showed interest in keeping them around. If needed, they could be resurrected in the future but it's more likely that we would prefer reintroduction of them as DT and multiplatform-enabled platforms instead. * OMAP4 controller code register define diet. They defined a lot of registers that were never actually used, etc. * Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate) to drivers/soc so it can be shared with 64-bit code. This also converts them over to traditional driver models where possible. * Removal of legacy gpio-samsung driver, since the last users have been removed (moved to pinctrl) Plus a bunch of smaller changes for various platforms that sort of dissapear in the diffstat for the above. clps711x cleanups, shmobile header file refactoring/moves for multiplatform friendliness, some misc cleanups, etc. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.14 (GNU/Linux) iQIcBAABAgAGBQJT5DYPAAoJEIwa5zzehBx37egQAIiatNiLLqZnfo3rwGADRz/a POfPovktj68aPcobyzoyhFtToMqGvi9PpysyFTIQD2HJFG+5BtiIAuqtg0875zDe EpBWgsfugrm0YktJWAtUerj60oAmNPbKfaEm1cOOWuM2lb2mV+QkRrwSTAgsqkT7 927BzMXKKBRPOVLL0RYhoF8EXa0Eg8kCqAHP8fJrzVYkRp+UrZJDnGiUP1XmWJN+ VXQMu5SEjcPMtqT7+tfX455RfREHJfBcJ1ZN/dPF8HMWDwClQG0lyc6hifh1MxwO 8DjIZNkfZeKqgDqVyC17re7pc7p8md5HL8WXbrKpK0A9vQ5bRexbPHxcwJ1T/C2Y 465H+st5XXbuzV1gbMwjK1/ycsH0tCyffckk8Yl/2e1Fs7GgPNbAELtTdl+5vV1Y xmDXkyo/9WlRM3LQ23IGKwW7VzN86EfWVuShssfro0fO7xDdb4OOYLdQI+4bCG+h ytQYun1vU32OEyNik5RVNQuZaMrv2c93a3bID4owwuPHPmYOPVUQaqnRX/0E51eA aHZYbk2GlUOV3Kq5aSS4iyLg1Yj+I9/NeH9U+A4nc+PQ5FlgGToaVSCuYuw4DqbP AAG+sqQHbkBMvDPobQz/yd1qZbAb4eLhGy11XK1t5S65rApWI55GwNXnvbyxqt8x wpmxJTASGxcfuZZgKXm7 =gbcE -----END PGP SIGNATURE----- Merge tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This merge window brings a good size of cleanups on various platforms. Among the bigger ones: - Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have lacked active support for quite a while, and after asking around nobody showed interest in keeping them around. If needed, they could be resurrected in the future but it's more likely that we would prefer reintroduction of them as DT and multiplatform-enabled platforms instead. - OMAP4 controller code register define diet. They defined a lot of registers that were never actually used, etc. - Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate) to drivers/soc so it can be shared with 64-bit code. This also converts them over to traditional driver models where possible. - Removal of legacy gpio-samsung driver, since the last users have been removed (moved to pinctrl) Plus a bunch of smaller changes for various platforms that sort of dissapear in the diffstat for the above. clps711x cleanups, shmobile header file refactoring/moves for multiplatform friendliness, some misc cleanups, etc" * tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits) drivers: CCI: Correct use of ! and & video: clcd-versatile: Depend on ARM video: fix up versatile CLCD helper move MAINTAINERS: Add sdhci-st file to ARCH/STI architecture ARM: EXYNOS: Fix build breakge with PM_SLEEP=n MAINTAINERS: Remove Kirkwood ARM: tegra: Convert PMC to a driver soc/tegra: fuse: Set up in early initcall ARM: tegra: Always lock the CPU reset vector ARM: tegra: Setup CPU hotplug in a pure initcall soc/tegra: Implement runtime check for Tegra SoCs soc/tegra: fuse: fix dummy functions soc/tegra: fuse: move APB DMA into Tegra20 fuse driver soc/tegra: Add efuse and apbmisc bindings soc/tegra: Add efuse driver for Tegra ARM: tegra: move fuse exports to soc/tegra/fuse.h ARM: tegra: export apb dma readl/writel ARM: tegra: Use a function to get the chip ID ARM: tegra: Sort includes alphabetically ARM: tegra: Move includes to include/soc/tegra ...
892 lines
24 KiB
C
892 lines
24 KiB
C
/*
|
|
* Lager board support
|
|
*
|
|
* Copyright (C) 2013-2014 Renesas Solutions Corp.
|
|
* Copyright (C) 2013 Magnus Damm
|
|
* Copyright (C) 2014 Cogent Embedded, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/input.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/mfd/tmio.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/sh_mmcif.h>
|
|
#include <linux/mmc/sh_mobile_sdhi.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/pinctrl/machine.h>
|
|
#include <linux/platform_data/camera-rcar.h>
|
|
#include <linux/platform_data/gpio-rcar.h>
|
|
#include <linux/platform_data/rcar-du.h>
|
|
#include <linux/platform_data/usb-rcar-gen2-phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/regulator/gpio-regulator.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/sh_eth.h>
|
|
#include <linux/spi/flash.h>
|
|
#include <linux/spi/rspi.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/usb/phy.h>
|
|
#include <linux/usb/renesas_usbhs.h>
|
|
|
|
#include <media/soc_camera.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <sound/rcar_snd.h>
|
|
#include <sound/simple_card.h>
|
|
|
|
#include "common.h"
|
|
#include "irqs.h"
|
|
#include "r8a7790.h"
|
|
#include "rcar-gen2.h"
|
|
|
|
/*
|
|
* SSI-AK4643
|
|
*
|
|
* SW1: 1: AK4643
|
|
* 2: CN22
|
|
* 3: ADV7511
|
|
*
|
|
* this command is required when playback.
|
|
*
|
|
* # amixer set "LINEOUT Mixer DACL" on
|
|
*/
|
|
|
|
/*
|
|
* SDHI0 (CN8)
|
|
*
|
|
* JP3: pin1
|
|
* SW20: pin1
|
|
|
|
* GP5_24: 1: VDD 3.3V (defult)
|
|
* 0: VDD 0.0V
|
|
* GP5_29: 1: VccQ 3.3V (defult)
|
|
* 0: VccQ 1.8V
|
|
*
|
|
*/
|
|
|
|
/* DU */
|
|
static struct rcar_du_encoder_data lager_du_encoders[] = {
|
|
{
|
|
.type = RCAR_DU_ENCODER_VGA,
|
|
.output = RCAR_DU_OUTPUT_DPAD0,
|
|
}, {
|
|
.type = RCAR_DU_ENCODER_NONE,
|
|
.output = RCAR_DU_OUTPUT_LVDS1,
|
|
.connector.lvds.panel = {
|
|
.width_mm = 210,
|
|
.height_mm = 158,
|
|
.mode = {
|
|
.clock = 65000,
|
|
.hdisplay = 1024,
|
|
.hsync_start = 1048,
|
|
.hsync_end = 1184,
|
|
.htotal = 1344,
|
|
.vdisplay = 768,
|
|
.vsync_start = 771,
|
|
.vsync_end = 777,
|
|
.vtotal = 806,
|
|
.flags = 0,
|
|
},
|
|
},
|
|
},
|
|
};
|
|
|
|
static const struct rcar_du_platform_data lager_du_pdata __initconst = {
|
|
.encoders = lager_du_encoders,
|
|
.num_encoders = ARRAY_SIZE(lager_du_encoders),
|
|
};
|
|
|
|
static const struct resource du_resources[] __initconst = {
|
|
DEFINE_RES_MEM(0xfeb00000, 0x70000),
|
|
DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
|
|
DEFINE_RES_MEM_NAMED(0xfeb94000, 0x1c, "lvds.1"),
|
|
DEFINE_RES_IRQ(gic_spi(256)),
|
|
DEFINE_RES_IRQ(gic_spi(268)),
|
|
DEFINE_RES_IRQ(gic_spi(269)),
|
|
};
|
|
|
|
static void __init lager_add_du_device(void)
|
|
{
|
|
struct platform_device_info info = {
|
|
.name = "rcar-du-r8a7790",
|
|
.id = -1,
|
|
.res = du_resources,
|
|
.num_res = ARRAY_SIZE(du_resources),
|
|
.data = &lager_du_pdata,
|
|
.size_data = sizeof(lager_du_pdata),
|
|
.dma_mask = DMA_BIT_MASK(32),
|
|
};
|
|
|
|
platform_device_register_full(&info);
|
|
}
|
|
|
|
/* LEDS */
|
|
static struct gpio_led lager_leds[] = {
|
|
{
|
|
.name = "led8",
|
|
.gpio = RCAR_GP_PIN(5, 17),
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
}, {
|
|
.name = "led7",
|
|
.gpio = RCAR_GP_PIN(4, 23),
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
}, {
|
|
.name = "led6",
|
|
.gpio = RCAR_GP_PIN(4, 22),
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
},
|
|
};
|
|
|
|
static const struct gpio_led_platform_data lager_leds_pdata __initconst = {
|
|
.leds = lager_leds,
|
|
.num_leds = ARRAY_SIZE(lager_leds),
|
|
};
|
|
|
|
/* GPIO KEY */
|
|
#define GPIO_KEY(c, g, d, ...) \
|
|
{ .code = c, .gpio = g, .desc = d, .active_low = 1, \
|
|
.wakeup = 1, .debounce_interval = 20 }
|
|
|
|
static struct gpio_keys_button gpio_buttons[] = {
|
|
GPIO_KEY(KEY_4, RCAR_GP_PIN(1, 28), "SW2-pin4"),
|
|
GPIO_KEY(KEY_3, RCAR_GP_PIN(1, 26), "SW2-pin3"),
|
|
GPIO_KEY(KEY_2, RCAR_GP_PIN(1, 24), "SW2-pin2"),
|
|
GPIO_KEY(KEY_1, RCAR_GP_PIN(1, 14), "SW2-pin1"),
|
|
};
|
|
|
|
static const struct gpio_keys_platform_data lager_keys_pdata __initconst = {
|
|
.buttons = gpio_buttons,
|
|
.nbuttons = ARRAY_SIZE(gpio_buttons),
|
|
};
|
|
|
|
/* Fixed 3.3V regulator to be used by MMCIF */
|
|
static struct regulator_consumer_supply fixed3v3_power_consumers[] =
|
|
{
|
|
REGULATOR_SUPPLY("vmmc", "sh_mmcif.1"),
|
|
};
|
|
|
|
/*
|
|
* SDHI regulator macro
|
|
*
|
|
** FIXME**
|
|
* Lager board vqmmc is provided via DA9063 PMIC chip,
|
|
* and we should use ${LINK}/drivers/mfd/da9063-* driver for it.
|
|
* but, it doesn't have regulator support at this point.
|
|
* It uses gpio-regulator for vqmmc as quick-hack.
|
|
*/
|
|
#define SDHI_REGULATOR(idx, vdd_pin, vccq_pin) \
|
|
static struct regulator_consumer_supply vcc_sdhi##idx##_consumer = \
|
|
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi." #idx); \
|
|
\
|
|
static struct regulator_init_data vcc_sdhi##idx##_init_data = { \
|
|
.constraints = { \
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS, \
|
|
}, \
|
|
.consumer_supplies = &vcc_sdhi##idx##_consumer, \
|
|
.num_consumer_supplies = 1, \
|
|
}; \
|
|
\
|
|
static const struct fixed_voltage_config vcc_sdhi##idx##_info __initconst = {\
|
|
.supply_name = "SDHI" #idx "Vcc", \
|
|
.microvolts = 3300000, \
|
|
.gpio = vdd_pin, \
|
|
.enable_high = 1, \
|
|
.init_data = &vcc_sdhi##idx##_init_data, \
|
|
}; \
|
|
\
|
|
static struct regulator_consumer_supply vccq_sdhi##idx##_consumer = \
|
|
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi." #idx); \
|
|
\
|
|
static struct regulator_init_data vccq_sdhi##idx##_init_data = { \
|
|
.constraints = { \
|
|
.input_uV = 3300000, \
|
|
.min_uV = 1800000, \
|
|
.max_uV = 3300000, \
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | \
|
|
REGULATOR_CHANGE_STATUS, \
|
|
}, \
|
|
.consumer_supplies = &vccq_sdhi##idx##_consumer, \
|
|
.num_consumer_supplies = 1, \
|
|
}; \
|
|
\
|
|
static struct gpio vccq_sdhi##idx##_gpio = \
|
|
{ vccq_pin, GPIOF_OUT_INIT_HIGH, "vccq-sdhi" #idx }; \
|
|
\
|
|
static struct gpio_regulator_state vccq_sdhi##idx##_states[] = { \
|
|
{ .value = 1800000, .gpios = 0 }, \
|
|
{ .value = 3300000, .gpios = 1 }, \
|
|
}; \
|
|
\
|
|
static const struct gpio_regulator_config vccq_sdhi##idx##_info __initconst = {\
|
|
.supply_name = "vqmmc", \
|
|
.gpios = &vccq_sdhi##idx##_gpio, \
|
|
.nr_gpios = 1, \
|
|
.states = vccq_sdhi##idx##_states, \
|
|
.nr_states = ARRAY_SIZE(vccq_sdhi##idx##_states), \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.init_data = &vccq_sdhi##idx##_init_data, \
|
|
};
|
|
|
|
SDHI_REGULATOR(0, RCAR_GP_PIN(5, 24), RCAR_GP_PIN(5, 29));
|
|
SDHI_REGULATOR(2, RCAR_GP_PIN(5, 25), RCAR_GP_PIN(5, 30));
|
|
|
|
/* MMCIF */
|
|
static const struct sh_mmcif_plat_data mmcif1_pdata __initconst = {
|
|
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
|
|
.clk_ctrl2_present = true,
|
|
.ccs_unsupported = true,
|
|
};
|
|
|
|
static const struct resource mmcif1_resources[] __initconst = {
|
|
DEFINE_RES_MEM(0xee220000, 0x80),
|
|
DEFINE_RES_IRQ(gic_spi(170)),
|
|
};
|
|
|
|
/* Ether */
|
|
static const struct sh_eth_plat_data ether_pdata __initconst = {
|
|
.phy = 0x1,
|
|
.phy_irq = irq_pin(0),
|
|
.edmac_endian = EDMAC_LITTLE_ENDIAN,
|
|
.phy_interface = PHY_INTERFACE_MODE_RMII,
|
|
.ether_link_active_low = 1,
|
|
};
|
|
|
|
static const struct resource ether_resources[] __initconst = {
|
|
DEFINE_RES_MEM(0xee700000, 0x400),
|
|
DEFINE_RES_IRQ(gic_spi(162)),
|
|
};
|
|
|
|
static const struct platform_device_info ether_info __initconst = {
|
|
.name = "r8a7790-ether",
|
|
.id = -1,
|
|
.res = ether_resources,
|
|
.num_res = ARRAY_SIZE(ether_resources),
|
|
.data = ðer_pdata,
|
|
.size_data = sizeof(ether_pdata),
|
|
.dma_mask = DMA_BIT_MASK(32),
|
|
};
|
|
|
|
/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64Mb) */
|
|
static struct mtd_partition spi_flash_part[] = {
|
|
/* Reserved for user loader program, read-only */
|
|
{
|
|
.name = "loader",
|
|
.offset = 0,
|
|
.size = SZ_256K,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
/* Reserved for user program, read-only */
|
|
{
|
|
.name = "user",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_4M,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
/* All else is writable (e.g. JFFS2) */
|
|
{
|
|
.name = "flash",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
.mask_flags = 0,
|
|
},
|
|
};
|
|
|
|
static const struct flash_platform_data spi_flash_data = {
|
|
.name = "m25p80",
|
|
.parts = spi_flash_part,
|
|
.nr_parts = ARRAY_SIZE(spi_flash_part),
|
|
.type = "s25fl512s",
|
|
};
|
|
|
|
static const struct rspi_plat_data qspi_pdata __initconst = {
|
|
.num_chipselect = 1,
|
|
};
|
|
|
|
static const struct spi_board_info spi_info[] __initconst = {
|
|
{
|
|
.modalias = "m25p80",
|
|
.platform_data = &spi_flash_data,
|
|
.mode = SPI_MODE_0 | SPI_TX_QUAD | SPI_RX_QUAD,
|
|
.max_speed_hz = 30000000,
|
|
.bus_num = 0,
|
|
.chip_select = 0,
|
|
},
|
|
};
|
|
|
|
/* QSPI resource */
|
|
static const struct resource qspi_resources[] __initconst = {
|
|
DEFINE_RES_MEM(0xe6b10000, 0x1000),
|
|
DEFINE_RES_IRQ_NAMED(gic_spi(184), "mux"),
|
|
};
|
|
|
|
/* VIN */
|
|
static const struct resource vin_resources[] __initconst = {
|
|
/* VIN0 */
|
|
DEFINE_RES_MEM(0xe6ef0000, 0x1000),
|
|
DEFINE_RES_IRQ(gic_spi(188)),
|
|
/* VIN1 */
|
|
DEFINE_RES_MEM(0xe6ef1000, 0x1000),
|
|
DEFINE_RES_IRQ(gic_spi(189)),
|
|
};
|
|
|
|
static void __init lager_add_vin_device(unsigned idx,
|
|
struct rcar_vin_platform_data *pdata)
|
|
{
|
|
struct platform_device_info vin_info = {
|
|
.name = "r8a7790-vin",
|
|
.id = idx,
|
|
.res = &vin_resources[idx * 2],
|
|
.num_res = 2,
|
|
.dma_mask = DMA_BIT_MASK(32),
|
|
.data = pdata,
|
|
.size_data = sizeof(*pdata),
|
|
};
|
|
|
|
BUG_ON(idx > 1);
|
|
|
|
platform_device_register_full(&vin_info);
|
|
}
|
|
|
|
#define LAGER_CAMERA(idx, name, addr, pdata, flag) \
|
|
static struct i2c_board_info i2c_cam##idx##_device = { \
|
|
I2C_BOARD_INFO(name, addr), \
|
|
}; \
|
|
\
|
|
static struct rcar_vin_platform_data vin##idx##_pdata = { \
|
|
.flags = flag, \
|
|
}; \
|
|
\
|
|
static struct soc_camera_link cam##idx##_link = { \
|
|
.bus_id = idx, \
|
|
.board_info = &i2c_cam##idx##_device, \
|
|
.i2c_adapter_id = 2, \
|
|
.module_name = name, \
|
|
.priv = pdata, \
|
|
}
|
|
|
|
/* Camera 0 is not currently supported due to adv7612 support missing */
|
|
LAGER_CAMERA(1, "adv7180", 0x20, NULL, RCAR_VIN_BT656);
|
|
|
|
static void __init lager_add_camera1_device(void)
|
|
{
|
|
platform_device_register_data(NULL, "soc-camera-pdrv", 1,
|
|
&cam1_link, sizeof(cam1_link));
|
|
lager_add_vin_device(1, &vin1_pdata);
|
|
}
|
|
|
|
/* SATA1 */
|
|
static const struct resource sata1_resources[] __initconst = {
|
|
DEFINE_RES_MEM(0xee500000, 0x2000),
|
|
DEFINE_RES_IRQ(gic_spi(106)),
|
|
};
|
|
|
|
static const struct platform_device_info sata1_info __initconst = {
|
|
.name = "sata-r8a7790",
|
|
.id = 1,
|
|
.res = sata1_resources,
|
|
.num_res = ARRAY_SIZE(sata1_resources),
|
|
.dma_mask = DMA_BIT_MASK(32),
|
|
};
|
|
|
|
/* USBHS */
|
|
static const struct resource usbhs_resources[] __initconst = {
|
|
DEFINE_RES_MEM(0xe6590000, 0x100),
|
|
DEFINE_RES_IRQ(gic_spi(107)),
|
|
};
|
|
|
|
struct usbhs_private {
|
|
struct renesas_usbhs_platform_info info;
|
|
struct usb_phy *phy;
|
|
};
|
|
|
|
#define usbhs_get_priv(pdev) \
|
|
container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info)
|
|
|
|
static int usbhs_power_ctrl(struct platform_device *pdev,
|
|
void __iomem *base, int enable)
|
|
{
|
|
struct usbhs_private *priv = usbhs_get_priv(pdev);
|
|
|
|
if (!priv->phy)
|
|
return -ENODEV;
|
|
|
|
if (enable) {
|
|
int retval = usb_phy_init(priv->phy);
|
|
|
|
if (!retval)
|
|
retval = usb_phy_set_suspend(priv->phy, 0);
|
|
return retval;
|
|
}
|
|
|
|
usb_phy_set_suspend(priv->phy, 1);
|
|
usb_phy_shutdown(priv->phy);
|
|
return 0;
|
|
}
|
|
|
|
static int usbhs_hardware_init(struct platform_device *pdev)
|
|
{
|
|
struct usbhs_private *priv = usbhs_get_priv(pdev);
|
|
struct usb_phy *phy;
|
|
int ret;
|
|
|
|
/* USB0 Function - use PWEN as GPIO input to detect DIP Switch SW5
|
|
* setting to avoid VBUS short circuit due to wrong cable.
|
|
* PWEN should be pulled up high if USB Function is selected by SW5
|
|
*/
|
|
gpio_request_one(RCAR_GP_PIN(5, 18), GPIOF_IN, NULL); /* USB0_PWEN */
|
|
if (!gpio_get_value(RCAR_GP_PIN(5, 18))) {
|
|
pr_warn("Error: USB Function not selected - check SW5 + SW6\n");
|
|
ret = -ENOTSUPP;
|
|
goto error;
|
|
}
|
|
|
|
phy = usb_get_phy_dev(&pdev->dev, 0);
|
|
if (IS_ERR(phy)) {
|
|
ret = PTR_ERR(phy);
|
|
goto error;
|
|
}
|
|
|
|
priv->phy = phy;
|
|
return 0;
|
|
error:
|
|
gpio_free(RCAR_GP_PIN(5, 18));
|
|
return ret;
|
|
}
|
|
|
|
static int usbhs_hardware_exit(struct platform_device *pdev)
|
|
{
|
|
struct usbhs_private *priv = usbhs_get_priv(pdev);
|
|
|
|
if (!priv->phy)
|
|
return 0;
|
|
|
|
usb_put_phy(priv->phy);
|
|
priv->phy = NULL;
|
|
|
|
gpio_free(RCAR_GP_PIN(5, 18));
|
|
return 0;
|
|
}
|
|
|
|
static int usbhs_get_id(struct platform_device *pdev)
|
|
{
|
|
return USBHS_GADGET;
|
|
}
|
|
|
|
static u32 lager_usbhs_pipe_type[] = {
|
|
USB_ENDPOINT_XFER_CONTROL,
|
|
USB_ENDPOINT_XFER_ISOC,
|
|
USB_ENDPOINT_XFER_ISOC,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_INT,
|
|
USB_ENDPOINT_XFER_INT,
|
|
USB_ENDPOINT_XFER_INT,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
};
|
|
|
|
static struct usbhs_private usbhs_priv __initdata = {
|
|
.info = {
|
|
.platform_callback = {
|
|
.power_ctrl = usbhs_power_ctrl,
|
|
.hardware_init = usbhs_hardware_init,
|
|
.hardware_exit = usbhs_hardware_exit,
|
|
.get_id = usbhs_get_id,
|
|
},
|
|
.driver_param = {
|
|
.buswait_bwait = 4,
|
|
.pipe_type = lager_usbhs_pipe_type,
|
|
.pipe_size = ARRAY_SIZE(lager_usbhs_pipe_type),
|
|
},
|
|
}
|
|
};
|
|
|
|
static void __init lager_register_usbhs(void)
|
|
{
|
|
usb_bind_phy("renesas_usbhs", 0, "usb_phy_rcar_gen2");
|
|
platform_device_register_resndata(NULL,
|
|
"renesas_usbhs", -1,
|
|
usbhs_resources,
|
|
ARRAY_SIZE(usbhs_resources),
|
|
&usbhs_priv.info,
|
|
sizeof(usbhs_priv.info));
|
|
}
|
|
|
|
/* USBHS PHY */
|
|
static const struct rcar_gen2_phy_platform_data usbhs_phy_pdata __initconst = {
|
|
.chan0_pci = 0, /* Channel 0 is USBHS */
|
|
.chan2_pci = 1, /* Channel 2 is PCI USB */
|
|
};
|
|
|
|
static const struct resource usbhs_phy_resources[] __initconst = {
|
|
DEFINE_RES_MEM(0xe6590100, 0x100),
|
|
};
|
|
|
|
/* I2C */
|
|
static struct i2c_board_info i2c2_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("ak4643", 0x12),
|
|
}
|
|
};
|
|
|
|
/* Sound */
|
|
static struct resource rsnd_resources[] __initdata = {
|
|
[RSND_GEN2_SCU] = DEFINE_RES_MEM(0xec500000, 0x1000),
|
|
[RSND_GEN2_ADG] = DEFINE_RES_MEM(0xec5a0000, 0x100),
|
|
[RSND_GEN2_SSIU] = DEFINE_RES_MEM(0xec540000, 0x1000),
|
|
[RSND_GEN2_SSI] = DEFINE_RES_MEM(0xec541000, 0x1280),
|
|
};
|
|
|
|
static struct rsnd_ssi_platform_info rsnd_ssi[] = {
|
|
RSND_SSI(0, gic_spi(370), 0),
|
|
RSND_SSI(0, gic_spi(371), RSND_SSI_CLK_PIN_SHARE),
|
|
};
|
|
|
|
static struct rsnd_src_platform_info rsnd_src[2] = {
|
|
/* no member at this point */
|
|
};
|
|
|
|
static struct rsnd_dai_platform_info rsnd_dai = {
|
|
.playback = { .ssi = &rsnd_ssi[0], },
|
|
.capture = { .ssi = &rsnd_ssi[1], },
|
|
};
|
|
|
|
static struct rcar_snd_info rsnd_info = {
|
|
.flags = RSND_GEN2,
|
|
.ssi_info = rsnd_ssi,
|
|
.ssi_info_nr = ARRAY_SIZE(rsnd_ssi),
|
|
.src_info = rsnd_src,
|
|
.src_info_nr = ARRAY_SIZE(rsnd_src),
|
|
.dai_info = &rsnd_dai,
|
|
.dai_info_nr = 1,
|
|
};
|
|
|
|
static struct asoc_simple_card_info rsnd_card_info = {
|
|
.name = "AK4643",
|
|
.card = "SSI01-AK4643",
|
|
.codec = "ak4642-codec.2-0012",
|
|
.platform = "rcar_sound",
|
|
.daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
|
|
.cpu_dai = {
|
|
.name = "rcar_sound",
|
|
},
|
|
.codec_dai = {
|
|
.name = "ak4642-hifi",
|
|
.sysclk = 11289600,
|
|
},
|
|
};
|
|
|
|
static void __init lager_add_rsnd_device(void)
|
|
{
|
|
struct platform_device_info cardinfo = {
|
|
.name = "asoc-simple-card",
|
|
.id = -1,
|
|
.data = &rsnd_card_info,
|
|
.size_data = sizeof(struct asoc_simple_card_info),
|
|
.dma_mask = DMA_BIT_MASK(32),
|
|
};
|
|
|
|
i2c_register_board_info(2, i2c2_devices,
|
|
ARRAY_SIZE(i2c2_devices));
|
|
|
|
platform_device_register_resndata(
|
|
NULL, "rcar_sound", -1,
|
|
rsnd_resources, ARRAY_SIZE(rsnd_resources),
|
|
&rsnd_info, sizeof(rsnd_info));
|
|
|
|
platform_device_register_full(&cardinfo);
|
|
}
|
|
|
|
/* SDHI0 */
|
|
static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
|
|
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
|
|
MMC_CAP_POWER_OFF_CARD,
|
|
.tmio_caps2 = MMC_CAP2_NO_MULTI_READ,
|
|
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
|
|
TMIO_MMC_WRPROTECT_DISABLE,
|
|
};
|
|
|
|
static struct resource sdhi0_resources[] __initdata = {
|
|
DEFINE_RES_MEM(0xee100000, 0x200),
|
|
DEFINE_RES_IRQ(gic_spi(165)),
|
|
};
|
|
|
|
/* SDHI2 */
|
|
static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
|
|
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
|
|
MMC_CAP_POWER_OFF_CARD,
|
|
.tmio_caps2 = MMC_CAP2_NO_MULTI_READ,
|
|
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
|
|
TMIO_MMC_WRPROTECT_DISABLE,
|
|
};
|
|
|
|
static struct resource sdhi2_resources[] __initdata = {
|
|
DEFINE_RES_MEM(0xee140000, 0x100),
|
|
DEFINE_RES_IRQ(gic_spi(167)),
|
|
};
|
|
|
|
/* Internal PCI1 */
|
|
static const struct resource pci1_resources[] __initconst = {
|
|
DEFINE_RES_MEM(0xee0b0000, 0x10000), /* CFG */
|
|
DEFINE_RES_MEM(0xee0a0000, 0x10000), /* MEM */
|
|
DEFINE_RES_IRQ(gic_spi(112)),
|
|
};
|
|
|
|
static const struct platform_device_info pci1_info __initconst = {
|
|
.name = "pci-rcar-gen2",
|
|
.id = 1,
|
|
.res = pci1_resources,
|
|
.num_res = ARRAY_SIZE(pci1_resources),
|
|
.dma_mask = DMA_BIT_MASK(32),
|
|
};
|
|
|
|
static void __init lager_add_usb1_device(void)
|
|
{
|
|
platform_device_register_full(&pci1_info);
|
|
}
|
|
|
|
/* Internal PCI2 */
|
|
static const struct resource pci2_resources[] __initconst = {
|
|
DEFINE_RES_MEM(0xee0d0000, 0x10000), /* CFG */
|
|
DEFINE_RES_MEM(0xee0c0000, 0x10000), /* MEM */
|
|
DEFINE_RES_IRQ(gic_spi(113)),
|
|
};
|
|
|
|
static const struct platform_device_info pci2_info __initconst = {
|
|
.name = "pci-rcar-gen2",
|
|
.id = 2,
|
|
.res = pci2_resources,
|
|
.num_res = ARRAY_SIZE(pci2_resources),
|
|
.dma_mask = DMA_BIT_MASK(32),
|
|
};
|
|
|
|
static void __init lager_add_usb2_device(void)
|
|
{
|
|
platform_device_register_full(&pci2_info);
|
|
}
|
|
|
|
static const struct pinctrl_map lager_pinctrl_map[] = {
|
|
/* DU (CN10: ARGB0, CN13: LVDS) */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
|
|
"du_rgb666", "du"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
|
|
"du_sync_1", "du"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
|
|
"du_clk_out_0", "du"),
|
|
/* I2C2 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar.2", "pfc-r8a7790",
|
|
"i2c2", "i2c2"),
|
|
/* QSPI */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7790",
|
|
"qspi_ctrl", "qspi"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7790",
|
|
"qspi_data4", "qspi"),
|
|
/* SCIF0 (CN19: DEBUG SERIAL0) */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
|
|
"scif0_data", "scif0"),
|
|
/* SCIF1 (CN20: DEBUG SERIAL1) */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790",
|
|
"scif1_data", "scif1"),
|
|
/* SDHI0 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
|
|
"sdhi0_data4", "sdhi0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
|
|
"sdhi0_ctrl", "sdhi0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
|
|
"sdhi0_cd", "sdhi0"),
|
|
/* SDHI2 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
|
|
"sdhi2_data4", "sdhi2"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
|
|
"sdhi2_ctrl", "sdhi2"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
|
|
"sdhi2_cd", "sdhi2"),
|
|
/* SSI (CN17: sound) */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
|
|
"ssi0129_ctrl", "ssi"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
|
|
"ssi0_data", "ssi"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
|
|
"ssi1_data", "ssi"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
|
|
"audio_clk_a", "audio_clk"),
|
|
/* MMCIF1 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
|
|
"mmc1_data8", "mmc1"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
|
|
"mmc1_ctrl", "mmc1"),
|
|
/* Ether */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
|
|
"eth_link", "eth"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
|
|
"eth_mdio", "eth"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
|
|
"eth_rmii", "eth"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
|
|
"intc_irq0", "intc"),
|
|
/* VIN0 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
|
|
"vin0_data24", "vin0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
|
|
"vin0_sync", "vin0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
|
|
"vin0_field", "vin0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
|
|
"vin0_clkenb", "vin0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
|
|
"vin0_clk", "vin0"),
|
|
/* VIN1 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.1", "pfc-r8a7790",
|
|
"vin1_data8", "vin1"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.1", "pfc-r8a7790",
|
|
"vin1_clk", "vin1"),
|
|
/* USB0 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7790",
|
|
"usb0_ovc_vbus", "usb0"),
|
|
/* USB1 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("pci-rcar-gen2.1", "pfc-r8a7790",
|
|
"usb1", "usb1"),
|
|
/* USB2 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("pci-rcar-gen2.2", "pfc-r8a7790",
|
|
"usb2", "usb2"),
|
|
};
|
|
|
|
static void __init lager_add_standard_devices(void)
|
|
{
|
|
int fixed_regulator_idx = 0;
|
|
int gpio_regulator_idx = 0;
|
|
|
|
r8a7790_clock_init();
|
|
|
|
pinctrl_register_mappings(lager_pinctrl_map,
|
|
ARRAY_SIZE(lager_pinctrl_map));
|
|
r8a7790_pinmux_init();
|
|
|
|
r8a7790_add_standard_devices();
|
|
platform_device_register_data(NULL, "leds-gpio", -1,
|
|
&lager_leds_pdata,
|
|
sizeof(lager_leds_pdata));
|
|
platform_device_register_data(NULL, "gpio-keys", -1,
|
|
&lager_keys_pdata,
|
|
sizeof(lager_keys_pdata));
|
|
regulator_register_always_on(fixed_regulator_idx++,
|
|
"fixed-3.3V", fixed3v3_power_consumers,
|
|
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
|
|
platform_device_register_resndata(NULL, "sh_mmcif", 1,
|
|
mmcif1_resources, ARRAY_SIZE(mmcif1_resources),
|
|
&mmcif1_pdata, sizeof(mmcif1_pdata));
|
|
|
|
platform_device_register_full(ðer_info);
|
|
|
|
lager_add_du_device();
|
|
|
|
platform_device_register_resndata(NULL, "qspi", 0,
|
|
qspi_resources,
|
|
ARRAY_SIZE(qspi_resources),
|
|
&qspi_pdata, sizeof(qspi_pdata));
|
|
spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
|
|
|
|
platform_device_register_data(NULL, "reg-fixed-voltage", fixed_regulator_idx++,
|
|
&vcc_sdhi0_info, sizeof(struct fixed_voltage_config));
|
|
platform_device_register_data(NULL, "reg-fixed-voltage", fixed_regulator_idx++,
|
|
&vcc_sdhi2_info, sizeof(struct fixed_voltage_config));
|
|
|
|
platform_device_register_data(NULL, "gpio-regulator", gpio_regulator_idx++,
|
|
&vccq_sdhi0_info, sizeof(struct gpio_regulator_config));
|
|
platform_device_register_data(NULL, "gpio-regulator", gpio_regulator_idx++,
|
|
&vccq_sdhi2_info, sizeof(struct gpio_regulator_config));
|
|
|
|
lager_add_camera1_device();
|
|
|
|
platform_device_register_full(&sata1_info);
|
|
|
|
platform_device_register_resndata(NULL, "usb_phy_rcar_gen2",
|
|
-1, usbhs_phy_resources,
|
|
ARRAY_SIZE(usbhs_phy_resources),
|
|
&usbhs_phy_pdata,
|
|
sizeof(usbhs_phy_pdata));
|
|
lager_register_usbhs();
|
|
lager_add_usb1_device();
|
|
lager_add_usb2_device();
|
|
|
|
lager_add_rsnd_device();
|
|
|
|
platform_device_register_resndata(NULL, "sh_mobile_sdhi", 0,
|
|
sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
|
|
&sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
|
|
platform_device_register_resndata(NULL, "sh_mobile_sdhi", 2,
|
|
sdhi2_resources, ARRAY_SIZE(sdhi2_resources),
|
|
&sdhi2_info, sizeof(struct sh_mobile_sdhi_info));
|
|
}
|
|
|
|
/*
|
|
* Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds
|
|
* to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits
|
|
* 14-15. We have to set them back to 01 from the default 00 value each time
|
|
* the PHY is reset. It's also important because the PHY's LED0 signal is
|
|
* connected to SoC's ETH_LINK signal and in the PHY's default mode it will
|
|
* bounce on and off after each packet, which we apparently want to avoid.
|
|
*/
|
|
static int lager_ksz8041_fixup(struct phy_device *phydev)
|
|
{
|
|
u16 phyctrl1 = phy_read(phydev, 0x1e);
|
|
|
|
phyctrl1 &= ~0xc000;
|
|
phyctrl1 |= 0x4000;
|
|
return phy_write(phydev, 0x1e, phyctrl1);
|
|
}
|
|
|
|
static void __init lager_init(void)
|
|
{
|
|
lager_add_standard_devices();
|
|
|
|
irq_set_irq_type(irq_pin(0), IRQ_TYPE_LEVEL_LOW);
|
|
|
|
if (IS_ENABLED(CONFIG_PHYLIB))
|
|
phy_register_fixup_for_id("r8a7790-ether-ff:01",
|
|
lager_ksz8041_fixup);
|
|
}
|
|
|
|
static const char * const lager_boards_compat_dt[] __initconst = {
|
|
"renesas,lager",
|
|
NULL,
|
|
};
|
|
|
|
DT_MACHINE_START(LAGER_DT, "lager")
|
|
.smp = smp_ops(r8a7790_smp_ops),
|
|
.init_early = shmobile_init_delay,
|
|
.init_time = rcar_gen2_timer_init,
|
|
.init_machine = lager_init,
|
|
.init_late = shmobile_init_late,
|
|
.dt_compat = lager_boards_compat_dt,
|
|
MACHINE_END
|