mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-03 09:04:21 +08:00
ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
622 lines
14 KiB
C
622 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Freescale MMA9551L Intelligent Motion-Sensing Platform driver
|
|
* Copyright (c) 2014, Intel Corporation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/events.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include "mma9551_core.h"
|
|
|
|
#define MMA9551_DRV_NAME "mma9551"
|
|
#define MMA9551_IRQ_NAME "mma9551_event"
|
|
#define MMA9551_GPIO_COUNT 4
|
|
|
|
/* Tilt application (inclination in IIO terms). */
|
|
#define MMA9551_TILT_XZ_ANG_REG 0x00
|
|
#define MMA9551_TILT_YZ_ANG_REG 0x01
|
|
#define MMA9551_TILT_XY_ANG_REG 0x02
|
|
#define MMA9551_TILT_ANGFLG BIT(7)
|
|
#define MMA9551_TILT_QUAD_REG 0x03
|
|
#define MMA9551_TILT_XY_QUAD_SHIFT 0
|
|
#define MMA9551_TILT_YZ_QUAD_SHIFT 2
|
|
#define MMA9551_TILT_XZ_QUAD_SHIFT 4
|
|
#define MMA9551_TILT_CFG_REG 0x01
|
|
#define MMA9551_TILT_ANG_THRESH_MASK GENMASK(3, 0)
|
|
|
|
#define MMA9551_DEFAULT_SAMPLE_RATE 122 /* Hz */
|
|
|
|
/* Tilt events are mapped to the first three GPIO pins. */
|
|
enum mma9551_tilt_axis {
|
|
mma9551_x = 0,
|
|
mma9551_y,
|
|
mma9551_z,
|
|
};
|
|
|
|
struct mma9551_data {
|
|
struct i2c_client *client;
|
|
struct mutex mutex;
|
|
int event_enabled[3];
|
|
int irqs[MMA9551_GPIO_COUNT];
|
|
};
|
|
|
|
static int mma9551_read_incli_chan(struct i2c_client *client,
|
|
const struct iio_chan_spec *chan,
|
|
int *val)
|
|
{
|
|
u8 quad_shift, angle, quadrant;
|
|
u16 reg_addr;
|
|
int ret;
|
|
|
|
switch (chan->channel2) {
|
|
case IIO_MOD_X:
|
|
reg_addr = MMA9551_TILT_YZ_ANG_REG;
|
|
quad_shift = MMA9551_TILT_YZ_QUAD_SHIFT;
|
|
break;
|
|
case IIO_MOD_Y:
|
|
reg_addr = MMA9551_TILT_XZ_ANG_REG;
|
|
quad_shift = MMA9551_TILT_XZ_QUAD_SHIFT;
|
|
break;
|
|
case IIO_MOD_Z:
|
|
reg_addr = MMA9551_TILT_XY_ANG_REG;
|
|
quad_shift = MMA9551_TILT_XY_QUAD_SHIFT;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = mma9551_set_power_state(client, true);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = mma9551_read_status_byte(client, MMA9551_APPID_TILT,
|
|
reg_addr, &angle);
|
|
if (ret < 0)
|
|
goto out_poweroff;
|
|
|
|
ret = mma9551_read_status_byte(client, MMA9551_APPID_TILT,
|
|
MMA9551_TILT_QUAD_REG, &quadrant);
|
|
if (ret < 0)
|
|
goto out_poweroff;
|
|
|
|
angle &= ~MMA9551_TILT_ANGFLG;
|
|
quadrant = (quadrant >> quad_shift) & 0x03;
|
|
|
|
if (quadrant == 1 || quadrant == 3)
|
|
*val = 90 * (quadrant + 1) - angle;
|
|
else
|
|
*val = angle + 90 * quadrant;
|
|
|
|
ret = IIO_VAL_INT;
|
|
|
|
out_poweroff:
|
|
mma9551_set_power_state(client, false);
|
|
return ret;
|
|
}
|
|
|
|
static int mma9551_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct mma9551_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_PROCESSED:
|
|
switch (chan->type) {
|
|
case IIO_INCLI:
|
|
mutex_lock(&data->mutex);
|
|
ret = mma9551_read_incli_chan(data->client, chan, val);
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
case IIO_CHAN_INFO_RAW:
|
|
switch (chan->type) {
|
|
case IIO_ACCEL:
|
|
mutex_lock(&data->mutex);
|
|
ret = mma9551_read_accel_chan(data->client,
|
|
chan, val, val2);
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
case IIO_CHAN_INFO_SCALE:
|
|
switch (chan->type) {
|
|
case IIO_ACCEL:
|
|
return mma9551_read_accel_scale(val, val2);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int mma9551_read_event_config(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir)
|
|
{
|
|
struct mma9551_data *data = iio_priv(indio_dev);
|
|
|
|
switch (chan->type) {
|
|
case IIO_INCLI:
|
|
/* IIO counts axes from 1, because IIO_NO_MOD is 0. */
|
|
return data->event_enabled[chan->channel2 - 1];
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int mma9551_config_incli_event(struct iio_dev *indio_dev,
|
|
enum iio_modifier axis,
|
|
int state)
|
|
{
|
|
struct mma9551_data *data = iio_priv(indio_dev);
|
|
enum mma9551_tilt_axis mma_axis;
|
|
int ret;
|
|
|
|
/* IIO counts axes from 1, because IIO_NO_MOD is 0. */
|
|
mma_axis = axis - 1;
|
|
|
|
if (data->event_enabled[mma_axis] == state)
|
|
return 0;
|
|
|
|
if (state == 0) {
|
|
ret = mma9551_gpio_config(data->client,
|
|
(enum mma9551_gpio_pin)mma_axis,
|
|
MMA9551_APPID_NONE, 0, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = mma9551_set_power_state(data->client, false);
|
|
if (ret < 0)
|
|
return ret;
|
|
} else {
|
|
int bitnum;
|
|
|
|
/* Bit 7 of each angle register holds the angle flag. */
|
|
switch (axis) {
|
|
case IIO_MOD_X:
|
|
bitnum = 7 + 8 * MMA9551_TILT_YZ_ANG_REG;
|
|
break;
|
|
case IIO_MOD_Y:
|
|
bitnum = 7 + 8 * MMA9551_TILT_XZ_ANG_REG;
|
|
break;
|
|
case IIO_MOD_Z:
|
|
bitnum = 7 + 8 * MMA9551_TILT_XY_ANG_REG;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
|
|
ret = mma9551_set_power_state(data->client, true);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = mma9551_gpio_config(data->client,
|
|
(enum mma9551_gpio_pin)mma_axis,
|
|
MMA9551_APPID_TILT, bitnum, 0);
|
|
if (ret < 0) {
|
|
mma9551_set_power_state(data->client, false);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
data->event_enabled[mma_axis] = state;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mma9551_write_event_config(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir,
|
|
int state)
|
|
{
|
|
struct mma9551_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (chan->type) {
|
|
case IIO_INCLI:
|
|
mutex_lock(&data->mutex);
|
|
ret = mma9551_config_incli_event(indio_dev,
|
|
chan->channel2, state);
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int mma9551_write_event_value(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir,
|
|
enum iio_event_info info,
|
|
int val, int val2)
|
|
{
|
|
struct mma9551_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (chan->type) {
|
|
case IIO_INCLI:
|
|
if (val2 != 0 || val < 1 || val > 10)
|
|
return -EINVAL;
|
|
mutex_lock(&data->mutex);
|
|
ret = mma9551_update_config_bits(data->client,
|
|
MMA9551_APPID_TILT,
|
|
MMA9551_TILT_CFG_REG,
|
|
MMA9551_TILT_ANG_THRESH_MASK,
|
|
val);
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int mma9551_read_event_value(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir,
|
|
enum iio_event_info info,
|
|
int *val, int *val2)
|
|
{
|
|
struct mma9551_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
u8 tmp;
|
|
|
|
switch (chan->type) {
|
|
case IIO_INCLI:
|
|
mutex_lock(&data->mutex);
|
|
ret = mma9551_read_config_byte(data->client,
|
|
MMA9551_APPID_TILT,
|
|
MMA9551_TILT_CFG_REG, &tmp);
|
|
mutex_unlock(&data->mutex);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = tmp & MMA9551_TILT_ANG_THRESH_MASK;
|
|
*val2 = 0;
|
|
return IIO_VAL_INT;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct iio_event_spec mma9551_incli_event = {
|
|
.type = IIO_EV_TYPE_ROC,
|
|
.dir = IIO_EV_DIR_RISING,
|
|
.mask_separate = BIT(IIO_EV_INFO_ENABLE),
|
|
.mask_shared_by_type = BIT(IIO_EV_INFO_VALUE),
|
|
};
|
|
|
|
#define MMA9551_INCLI_CHANNEL(axis) { \
|
|
.type = IIO_INCLI, \
|
|
.modified = 1, \
|
|
.channel2 = axis, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
|
|
.event_spec = &mma9551_incli_event, \
|
|
.num_event_specs = 1, \
|
|
}
|
|
|
|
static const struct iio_chan_spec mma9551_channels[] = {
|
|
MMA9551_ACCEL_CHANNEL(IIO_MOD_X),
|
|
MMA9551_ACCEL_CHANNEL(IIO_MOD_Y),
|
|
MMA9551_ACCEL_CHANNEL(IIO_MOD_Z),
|
|
|
|
MMA9551_INCLI_CHANNEL(IIO_MOD_X),
|
|
MMA9551_INCLI_CHANNEL(IIO_MOD_Y),
|
|
MMA9551_INCLI_CHANNEL(IIO_MOD_Z),
|
|
};
|
|
|
|
static const struct iio_info mma9551_info = {
|
|
.read_raw = mma9551_read_raw,
|
|
.read_event_config = mma9551_read_event_config,
|
|
.write_event_config = mma9551_write_event_config,
|
|
.read_event_value = mma9551_read_event_value,
|
|
.write_event_value = mma9551_write_event_value,
|
|
};
|
|
|
|
static irqreturn_t mma9551_event_handler(int irq, void *private)
|
|
{
|
|
struct iio_dev *indio_dev = private;
|
|
struct mma9551_data *data = iio_priv(indio_dev);
|
|
int i, ret, mma_axis = -1;
|
|
u16 reg;
|
|
u8 val;
|
|
|
|
mutex_lock(&data->mutex);
|
|
|
|
for (i = 0; i < 3; i++)
|
|
if (irq == data->irqs[i]) {
|
|
mma_axis = i;
|
|
break;
|
|
}
|
|
|
|
if (mma_axis == -1) {
|
|
/* IRQ was triggered on 4th line, which we don't use. */
|
|
dev_warn(&data->client->dev,
|
|
"irq triggered on unused line %d\n", data->irqs[3]);
|
|
goto out;
|
|
}
|
|
|
|
switch (mma_axis) {
|
|
case mma9551_x:
|
|
reg = MMA9551_TILT_YZ_ANG_REG;
|
|
break;
|
|
case mma9551_y:
|
|
reg = MMA9551_TILT_XZ_ANG_REG;
|
|
break;
|
|
case mma9551_z:
|
|
reg = MMA9551_TILT_XY_ANG_REG;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Read the angle even though we don't use it, otherwise we
|
|
* won't get any further interrupts.
|
|
*/
|
|
ret = mma9551_read_status_byte(data->client, MMA9551_APPID_TILT,
|
|
reg, &val);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev,
|
|
"error %d reading tilt register in IRQ\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
iio_push_event(indio_dev,
|
|
IIO_MOD_EVENT_CODE(IIO_INCLI, 0, (mma_axis + 1),
|
|
IIO_EV_TYPE_ROC, IIO_EV_DIR_RISING),
|
|
iio_get_time_ns(indio_dev));
|
|
|
|
out:
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int mma9551_init(struct mma9551_data *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = mma9551_read_version(data->client);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return mma9551_set_device_state(data->client, true);
|
|
}
|
|
|
|
static int mma9551_gpio_probe(struct iio_dev *indio_dev)
|
|
{
|
|
struct gpio_desc *gpio;
|
|
int i, ret;
|
|
struct mma9551_data *data = iio_priv(indio_dev);
|
|
struct device *dev = &data->client->dev;
|
|
|
|
for (i = 0; i < MMA9551_GPIO_COUNT; i++) {
|
|
gpio = devm_gpiod_get_index(dev, NULL, i, GPIOD_IN);
|
|
if (IS_ERR(gpio)) {
|
|
dev_err(dev, "acpi gpio get index failed\n");
|
|
return PTR_ERR(gpio);
|
|
}
|
|
|
|
ret = gpiod_to_irq(gpio);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
data->irqs[i] = ret;
|
|
ret = devm_request_threaded_irq(dev, data->irqs[i],
|
|
NULL, mma9551_event_handler,
|
|
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
|
|
MMA9551_IRQ_NAME, indio_dev);
|
|
if (ret < 0) {
|
|
dev_err(dev, "request irq %d failed\n", data->irqs[i]);
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(dev, "gpio resource, no:%d irq:%d\n",
|
|
desc_to_gpio(gpio), data->irqs[i]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const char *mma9551_match_acpi_device(struct device *dev)
|
|
{
|
|
const struct acpi_device_id *id;
|
|
|
|
id = acpi_match_device(dev->driver->acpi_match_table, dev);
|
|
if (!id)
|
|
return NULL;
|
|
|
|
return dev_name(dev);
|
|
}
|
|
|
|
static int mma9551_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct mma9551_data *data;
|
|
struct iio_dev *indio_dev;
|
|
const char *name = NULL;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
i2c_set_clientdata(client, indio_dev);
|
|
data->client = client;
|
|
|
|
if (id)
|
|
name = id->name;
|
|
else if (ACPI_HANDLE(&client->dev))
|
|
name = mma9551_match_acpi_device(&client->dev);
|
|
|
|
ret = mma9551_init(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
mutex_init(&data->mutex);
|
|
|
|
indio_dev->channels = mma9551_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(mma9551_channels);
|
|
indio_dev->name = name;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &mma9551_info;
|
|
|
|
ret = mma9551_gpio_probe(indio_dev);
|
|
if (ret < 0)
|
|
goto out_poweroff;
|
|
|
|
ret = pm_runtime_set_active(&client->dev);
|
|
if (ret < 0)
|
|
goto out_poweroff;
|
|
|
|
pm_runtime_enable(&client->dev);
|
|
pm_runtime_set_autosuspend_delay(&client->dev,
|
|
MMA9551_AUTO_SUSPEND_DELAY_MS);
|
|
pm_runtime_use_autosuspend(&client->dev);
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "unable to register iio device\n");
|
|
goto err_pm_cleanup;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_pm_cleanup:
|
|
pm_runtime_dont_use_autosuspend(&client->dev);
|
|
pm_runtime_disable(&client->dev);
|
|
out_poweroff:
|
|
mma9551_set_device_state(client, false);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void mma9551_remove(struct i2c_client *client)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
struct mma9551_data *data = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
|
|
pm_runtime_disable(&client->dev);
|
|
pm_runtime_set_suspended(&client->dev);
|
|
|
|
mutex_lock(&data->mutex);
|
|
mma9551_set_device_state(data->client, false);
|
|
mutex_unlock(&data->mutex);
|
|
}
|
|
|
|
static int mma9551_runtime_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct mma9551_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
mutex_lock(&data->mutex);
|
|
ret = mma9551_set_device_state(data->client, false);
|
|
mutex_unlock(&data->mutex);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "powering off device failed\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mma9551_runtime_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct mma9551_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
ret = mma9551_set_device_state(data->client, true);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
mma9551_sleep(MMA9551_DEFAULT_SAMPLE_RATE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mma9551_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct mma9551_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
mutex_lock(&data->mutex);
|
|
ret = mma9551_set_device_state(data->client, false);
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mma9551_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct mma9551_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
mutex_lock(&data->mutex);
|
|
ret = mma9551_set_device_state(data->client, true);
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dev_pm_ops mma9551_pm_ops = {
|
|
SYSTEM_SLEEP_PM_OPS(mma9551_suspend, mma9551_resume)
|
|
RUNTIME_PM_OPS(mma9551_runtime_suspend, mma9551_runtime_resume, NULL)
|
|
};
|
|
|
|
static const struct acpi_device_id mma9551_acpi_match[] = {
|
|
{"MMA9551", 0},
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(acpi, mma9551_acpi_match);
|
|
|
|
static const struct i2c_device_id mma9551_id[] = {
|
|
{"mma9551", 0},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, mma9551_id);
|
|
|
|
static struct i2c_driver mma9551_driver = {
|
|
.driver = {
|
|
.name = MMA9551_DRV_NAME,
|
|
.acpi_match_table = ACPI_PTR(mma9551_acpi_match),
|
|
.pm = pm_ptr(&mma9551_pm_ops),
|
|
},
|
|
.probe = mma9551_probe,
|
|
.remove = mma9551_remove,
|
|
.id_table = mma9551_id,
|
|
};
|
|
|
|
module_i2c_driver(mma9551_driver);
|
|
|
|
MODULE_AUTHOR("Irina Tirdea <irina.tirdea@intel.com>");
|
|
MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("MMA9551L motion-sensing platform driver");
|
|
MODULE_IMPORT_NS(IIO_MMA9551);
|