mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-12 05:24:12 +08:00
75223bbea8
Currently, the built-in 64-byte FIFO on the MCSPI controller is not enabled in PIO mode and is used only when DMA is enabled. Enable the FIFO in PIO mode by default for transactions larger than the FIFO depth and fallback only if FIFO is not available. When DMA is not enabled, it is efficient to enable the RX FIFO almost full and TX FIFO almost empty events after each FIFO fill instead of each word. Update omap2_mcspi_set_fifo() to enable the events accordingly and also rely on OMAP2_MCSPI_CHSTAT_RXS for the last transfer instead of the FIFO events to handle the case when the transfer size is not a multiple of FIFO depth. See J721E Technical Reference Manual (SPRUI1C), section 12.1.5 for further details: http://www.ti.com/lit/pdf/spruil1 Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Link: https://lore.kernel.org/r/20231013092629.19005-1-vaishnav.a@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
1743 lines
44 KiB
C
1743 lines
44 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* OMAP2 McSPI controller driver
|
|
*
|
|
* Copyright (C) 2005, 2006 Nokia Corporation
|
|
* Author: Samuel Ortiz <samuel.ortiz@nokia.com> and
|
|
* Juha Yrjola <juha.yrjola@nokia.com>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/gcd.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include <linux/platform_data/spi-omap2-mcspi.h>
|
|
|
|
#define OMAP2_MCSPI_MAX_FREQ 48000000
|
|
#define OMAP2_MCSPI_MAX_DIVIDER 4096
|
|
#define OMAP2_MCSPI_MAX_FIFODEPTH 64
|
|
#define OMAP2_MCSPI_MAX_FIFOWCNT 0xFFFF
|
|
#define SPI_AUTOSUSPEND_TIMEOUT 2000
|
|
|
|
#define OMAP2_MCSPI_REVISION 0x00
|
|
#define OMAP2_MCSPI_SYSSTATUS 0x14
|
|
#define OMAP2_MCSPI_IRQSTATUS 0x18
|
|
#define OMAP2_MCSPI_IRQENABLE 0x1c
|
|
#define OMAP2_MCSPI_WAKEUPENABLE 0x20
|
|
#define OMAP2_MCSPI_SYST 0x24
|
|
#define OMAP2_MCSPI_MODULCTRL 0x28
|
|
#define OMAP2_MCSPI_XFERLEVEL 0x7c
|
|
|
|
/* per-channel banks, 0x14 bytes each, first is: */
|
|
#define OMAP2_MCSPI_CHCONF0 0x2c
|
|
#define OMAP2_MCSPI_CHSTAT0 0x30
|
|
#define OMAP2_MCSPI_CHCTRL0 0x34
|
|
#define OMAP2_MCSPI_TX0 0x38
|
|
#define OMAP2_MCSPI_RX0 0x3c
|
|
|
|
/* per-register bitmasks: */
|
|
#define OMAP2_MCSPI_IRQSTATUS_EOW BIT(17)
|
|
#define OMAP2_MCSPI_IRQSTATUS_TX0_EMPTY BIT(0)
|
|
#define OMAP2_MCSPI_IRQSTATUS_RX0_FULL BIT(2)
|
|
|
|
#define OMAP2_MCSPI_MODULCTRL_SINGLE BIT(0)
|
|
#define OMAP2_MCSPI_MODULCTRL_MS BIT(2)
|
|
#define OMAP2_MCSPI_MODULCTRL_STEST BIT(3)
|
|
|
|
#define OMAP2_MCSPI_CHCONF_PHA BIT(0)
|
|
#define OMAP2_MCSPI_CHCONF_POL BIT(1)
|
|
#define OMAP2_MCSPI_CHCONF_CLKD_MASK (0x0f << 2)
|
|
#define OMAP2_MCSPI_CHCONF_EPOL BIT(6)
|
|
#define OMAP2_MCSPI_CHCONF_WL_MASK (0x1f << 7)
|
|
#define OMAP2_MCSPI_CHCONF_TRM_RX_ONLY BIT(12)
|
|
#define OMAP2_MCSPI_CHCONF_TRM_TX_ONLY BIT(13)
|
|
#define OMAP2_MCSPI_CHCONF_TRM_MASK (0x03 << 12)
|
|
#define OMAP2_MCSPI_CHCONF_DMAW BIT(14)
|
|
#define OMAP2_MCSPI_CHCONF_DMAR BIT(15)
|
|
#define OMAP2_MCSPI_CHCONF_DPE0 BIT(16)
|
|
#define OMAP2_MCSPI_CHCONF_DPE1 BIT(17)
|
|
#define OMAP2_MCSPI_CHCONF_IS BIT(18)
|
|
#define OMAP2_MCSPI_CHCONF_TURBO BIT(19)
|
|
#define OMAP2_MCSPI_CHCONF_FORCE BIT(20)
|
|
#define OMAP2_MCSPI_CHCONF_FFET BIT(27)
|
|
#define OMAP2_MCSPI_CHCONF_FFER BIT(28)
|
|
#define OMAP2_MCSPI_CHCONF_CLKG BIT(29)
|
|
|
|
#define OMAP2_MCSPI_CHSTAT_RXS BIT(0)
|
|
#define OMAP2_MCSPI_CHSTAT_TXS BIT(1)
|
|
#define OMAP2_MCSPI_CHSTAT_EOT BIT(2)
|
|
#define OMAP2_MCSPI_CHSTAT_TXFFE BIT(3)
|
|
|
|
#define OMAP2_MCSPI_CHCTRL_EN BIT(0)
|
|
#define OMAP2_MCSPI_CHCTRL_EXTCLK_MASK (0xff << 8)
|
|
|
|
#define OMAP2_MCSPI_WAKEUPENABLE_WKEN BIT(0)
|
|
|
|
/* We have 2 DMA channels per CS, one for RX and one for TX */
|
|
struct omap2_mcspi_dma {
|
|
struct dma_chan *dma_tx;
|
|
struct dma_chan *dma_rx;
|
|
|
|
struct completion dma_tx_completion;
|
|
struct completion dma_rx_completion;
|
|
|
|
char dma_rx_ch_name[14];
|
|
char dma_tx_ch_name[14];
|
|
};
|
|
|
|
/* use PIO for small transfers, avoiding DMA setup/teardown overhead and
|
|
* cache operations; better heuristics consider wordsize and bitrate.
|
|
*/
|
|
#define DMA_MIN_BYTES 160
|
|
|
|
|
|
/*
|
|
* Used for context save and restore, structure members to be updated whenever
|
|
* corresponding registers are modified.
|
|
*/
|
|
struct omap2_mcspi_regs {
|
|
u32 modulctrl;
|
|
u32 wakeupenable;
|
|
struct list_head cs;
|
|
};
|
|
|
|
struct omap2_mcspi {
|
|
struct completion txdone;
|
|
struct spi_controller *ctlr;
|
|
/* Virtual base address of the controller */
|
|
void __iomem *base;
|
|
unsigned long phys;
|
|
/* SPI1 has 4 channels, while SPI2 has 2 */
|
|
struct omap2_mcspi_dma *dma_channels;
|
|
struct device *dev;
|
|
struct omap2_mcspi_regs ctx;
|
|
struct clk *ref_clk;
|
|
int fifo_depth;
|
|
bool target_aborted;
|
|
unsigned int pin_dir:1;
|
|
size_t max_xfer_len;
|
|
u32 ref_clk_hz;
|
|
};
|
|
|
|
struct omap2_mcspi_cs {
|
|
void __iomem *base;
|
|
unsigned long phys;
|
|
int word_len;
|
|
u16 mode;
|
|
struct list_head node;
|
|
/* Context save and restore shadow register */
|
|
u32 chconf0, chctrl0;
|
|
};
|
|
|
|
static inline void mcspi_write_reg(struct spi_controller *ctlr,
|
|
int idx, u32 val)
|
|
{
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(ctlr);
|
|
|
|
writel_relaxed(val, mcspi->base + idx);
|
|
}
|
|
|
|
static inline u32 mcspi_read_reg(struct spi_controller *ctlr, int idx)
|
|
{
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(ctlr);
|
|
|
|
return readl_relaxed(mcspi->base + idx);
|
|
}
|
|
|
|
static inline void mcspi_write_cs_reg(const struct spi_device *spi,
|
|
int idx, u32 val)
|
|
{
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
|
|
writel_relaxed(val, cs->base + idx);
|
|
}
|
|
|
|
static inline u32 mcspi_read_cs_reg(const struct spi_device *spi, int idx)
|
|
{
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
|
|
return readl_relaxed(cs->base + idx);
|
|
}
|
|
|
|
static inline u32 mcspi_cached_chconf0(const struct spi_device *spi)
|
|
{
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
|
|
return cs->chconf0;
|
|
}
|
|
|
|
static inline void mcspi_write_chconf0(const struct spi_device *spi, u32 val)
|
|
{
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
|
|
cs->chconf0 = val;
|
|
mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, val);
|
|
mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0);
|
|
}
|
|
|
|
static inline int mcspi_bytes_per_word(int word_len)
|
|
{
|
|
if (word_len <= 8)
|
|
return 1;
|
|
else if (word_len <= 16)
|
|
return 2;
|
|
else /* word_len <= 32 */
|
|
return 4;
|
|
}
|
|
|
|
static void omap2_mcspi_set_dma_req(const struct spi_device *spi,
|
|
int is_read, int enable)
|
|
{
|
|
u32 l, rw;
|
|
|
|
l = mcspi_cached_chconf0(spi);
|
|
|
|
if (is_read) /* 1 is read, 0 write */
|
|
rw = OMAP2_MCSPI_CHCONF_DMAR;
|
|
else
|
|
rw = OMAP2_MCSPI_CHCONF_DMAW;
|
|
|
|
if (enable)
|
|
l |= rw;
|
|
else
|
|
l &= ~rw;
|
|
|
|
mcspi_write_chconf0(spi, l);
|
|
}
|
|
|
|
static void omap2_mcspi_set_enable(const struct spi_device *spi, int enable)
|
|
{
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
u32 l;
|
|
|
|
l = cs->chctrl0;
|
|
if (enable)
|
|
l |= OMAP2_MCSPI_CHCTRL_EN;
|
|
else
|
|
l &= ~OMAP2_MCSPI_CHCTRL_EN;
|
|
cs->chctrl0 = l;
|
|
mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCTRL0, cs->chctrl0);
|
|
/* Flash post-writes */
|
|
mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCTRL0);
|
|
}
|
|
|
|
static void omap2_mcspi_set_cs(struct spi_device *spi, bool enable)
|
|
{
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(spi->controller);
|
|
u32 l;
|
|
|
|
/* The controller handles the inverted chip selects
|
|
* using the OMAP2_MCSPI_CHCONF_EPOL bit so revert
|
|
* the inversion from the core spi_set_cs function.
|
|
*/
|
|
if (spi->mode & SPI_CS_HIGH)
|
|
enable = !enable;
|
|
|
|
if (spi->controller_state) {
|
|
int err = pm_runtime_resume_and_get(mcspi->dev);
|
|
if (err < 0) {
|
|
dev_err(mcspi->dev, "failed to get sync: %d\n", err);
|
|
return;
|
|
}
|
|
|
|
l = mcspi_cached_chconf0(spi);
|
|
|
|
if (enable)
|
|
l &= ~OMAP2_MCSPI_CHCONF_FORCE;
|
|
else
|
|
l |= OMAP2_MCSPI_CHCONF_FORCE;
|
|
|
|
mcspi_write_chconf0(spi, l);
|
|
|
|
pm_runtime_mark_last_busy(mcspi->dev);
|
|
pm_runtime_put_autosuspend(mcspi->dev);
|
|
}
|
|
}
|
|
|
|
static void omap2_mcspi_set_mode(struct spi_controller *ctlr)
|
|
{
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(ctlr);
|
|
struct omap2_mcspi_regs *ctx = &mcspi->ctx;
|
|
u32 l;
|
|
|
|
/*
|
|
* Choose host or target mode
|
|
*/
|
|
l = mcspi_read_reg(ctlr, OMAP2_MCSPI_MODULCTRL);
|
|
l &= ~(OMAP2_MCSPI_MODULCTRL_STEST);
|
|
if (spi_controller_is_target(ctlr)) {
|
|
l |= (OMAP2_MCSPI_MODULCTRL_MS);
|
|
} else {
|
|
l &= ~(OMAP2_MCSPI_MODULCTRL_MS);
|
|
l |= OMAP2_MCSPI_MODULCTRL_SINGLE;
|
|
}
|
|
mcspi_write_reg(ctlr, OMAP2_MCSPI_MODULCTRL, l);
|
|
|
|
ctx->modulctrl = l;
|
|
}
|
|
|
|
static void omap2_mcspi_set_fifo(const struct spi_device *spi,
|
|
struct spi_transfer *t, int enable, int dma_enabled)
|
|
{
|
|
struct spi_controller *ctlr = spi->controller;
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
struct omap2_mcspi *mcspi;
|
|
unsigned int wcnt;
|
|
int max_fifo_depth, bytes_per_word;
|
|
u32 chconf, xferlevel;
|
|
|
|
mcspi = spi_controller_get_devdata(ctlr);
|
|
|
|
chconf = mcspi_cached_chconf0(spi);
|
|
if (enable) {
|
|
bytes_per_word = mcspi_bytes_per_word(cs->word_len);
|
|
if (t->len % bytes_per_word != 0)
|
|
goto disable_fifo;
|
|
|
|
if (t->rx_buf != NULL && t->tx_buf != NULL)
|
|
max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH / 2;
|
|
else
|
|
max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH;
|
|
if (dma_enabled)
|
|
wcnt = t->len / bytes_per_word;
|
|
else
|
|
wcnt = 0;
|
|
if (wcnt > OMAP2_MCSPI_MAX_FIFOWCNT)
|
|
goto disable_fifo;
|
|
|
|
xferlevel = wcnt << 16;
|
|
if (t->rx_buf != NULL) {
|
|
chconf |= OMAP2_MCSPI_CHCONF_FFER;
|
|
if (dma_enabled)
|
|
xferlevel |= (bytes_per_word - 1) << 8;
|
|
else
|
|
xferlevel |= (max_fifo_depth - 1) << 8;
|
|
}
|
|
|
|
if (t->tx_buf != NULL) {
|
|
chconf |= OMAP2_MCSPI_CHCONF_FFET;
|
|
if (dma_enabled)
|
|
xferlevel |= bytes_per_word - 1;
|
|
else
|
|
xferlevel |= (max_fifo_depth - 1);
|
|
}
|
|
|
|
mcspi_write_reg(ctlr, OMAP2_MCSPI_XFERLEVEL, xferlevel);
|
|
mcspi_write_chconf0(spi, chconf);
|
|
mcspi->fifo_depth = max_fifo_depth;
|
|
|
|
return;
|
|
}
|
|
|
|
disable_fifo:
|
|
if (t->rx_buf != NULL)
|
|
chconf &= ~OMAP2_MCSPI_CHCONF_FFER;
|
|
|
|
if (t->tx_buf != NULL)
|
|
chconf &= ~OMAP2_MCSPI_CHCONF_FFET;
|
|
|
|
mcspi_write_chconf0(spi, chconf);
|
|
mcspi->fifo_depth = 0;
|
|
}
|
|
|
|
static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit)
|
|
{
|
|
unsigned long timeout;
|
|
|
|
timeout = jiffies + msecs_to_jiffies(1000);
|
|
while (!(readl_relaxed(reg) & bit)) {
|
|
if (time_after(jiffies, timeout)) {
|
|
if (!(readl_relaxed(reg) & bit))
|
|
return -ETIMEDOUT;
|
|
else
|
|
return 0;
|
|
}
|
|
cpu_relax();
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mcspi_wait_for_completion(struct omap2_mcspi *mcspi,
|
|
struct completion *x)
|
|
{
|
|
if (spi_controller_is_target(mcspi->ctlr)) {
|
|
if (wait_for_completion_interruptible(x) ||
|
|
mcspi->target_aborted)
|
|
return -EINTR;
|
|
} else {
|
|
wait_for_completion(x);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void omap2_mcspi_rx_callback(void *data)
|
|
{
|
|
struct spi_device *spi = data;
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(spi->controller);
|
|
struct omap2_mcspi_dma *mcspi_dma = &mcspi->dma_channels[spi_get_chipselect(spi, 0)];
|
|
|
|
/* We must disable the DMA RX request */
|
|
omap2_mcspi_set_dma_req(spi, 1, 0);
|
|
|
|
complete(&mcspi_dma->dma_rx_completion);
|
|
}
|
|
|
|
static void omap2_mcspi_tx_callback(void *data)
|
|
{
|
|
struct spi_device *spi = data;
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(spi->controller);
|
|
struct omap2_mcspi_dma *mcspi_dma = &mcspi->dma_channels[spi_get_chipselect(spi, 0)];
|
|
|
|
/* We must disable the DMA TX request */
|
|
omap2_mcspi_set_dma_req(spi, 0, 0);
|
|
|
|
complete(&mcspi_dma->dma_tx_completion);
|
|
}
|
|
|
|
static void omap2_mcspi_tx_dma(struct spi_device *spi,
|
|
struct spi_transfer *xfer,
|
|
struct dma_slave_config cfg)
|
|
{
|
|
struct omap2_mcspi *mcspi;
|
|
struct omap2_mcspi_dma *mcspi_dma;
|
|
struct dma_async_tx_descriptor *tx;
|
|
|
|
mcspi = spi_controller_get_devdata(spi->controller);
|
|
mcspi_dma = &mcspi->dma_channels[spi_get_chipselect(spi, 0)];
|
|
|
|
dmaengine_slave_config(mcspi_dma->dma_tx, &cfg);
|
|
|
|
tx = dmaengine_prep_slave_sg(mcspi_dma->dma_tx, xfer->tx_sg.sgl,
|
|
xfer->tx_sg.nents,
|
|
DMA_MEM_TO_DEV,
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
if (tx) {
|
|
tx->callback = omap2_mcspi_tx_callback;
|
|
tx->callback_param = spi;
|
|
dmaengine_submit(tx);
|
|
} else {
|
|
/* FIXME: fall back to PIO? */
|
|
}
|
|
dma_async_issue_pending(mcspi_dma->dma_tx);
|
|
omap2_mcspi_set_dma_req(spi, 0, 1);
|
|
}
|
|
|
|
static unsigned
|
|
omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer,
|
|
struct dma_slave_config cfg,
|
|
unsigned es)
|
|
{
|
|
struct omap2_mcspi *mcspi;
|
|
struct omap2_mcspi_dma *mcspi_dma;
|
|
unsigned int count, transfer_reduction = 0;
|
|
struct scatterlist *sg_out[2];
|
|
int nb_sizes = 0, out_mapped_nents[2], ret, x;
|
|
size_t sizes[2];
|
|
u32 l;
|
|
int elements = 0;
|
|
int word_len, element_count;
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
void __iomem *chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0;
|
|
struct dma_async_tx_descriptor *tx;
|
|
|
|
mcspi = spi_controller_get_devdata(spi->controller);
|
|
mcspi_dma = &mcspi->dma_channels[spi_get_chipselect(spi, 0)];
|
|
count = xfer->len;
|
|
|
|
/*
|
|
* In the "End-of-Transfer Procedure" section for DMA RX in OMAP35x TRM
|
|
* it mentions reducing DMA transfer length by one element in host
|
|
* normal mode.
|
|
*/
|
|
if (mcspi->fifo_depth == 0)
|
|
transfer_reduction = es;
|
|
|
|
word_len = cs->word_len;
|
|
l = mcspi_cached_chconf0(spi);
|
|
|
|
if (word_len <= 8)
|
|
element_count = count;
|
|
else if (word_len <= 16)
|
|
element_count = count >> 1;
|
|
else /* word_len <= 32 */
|
|
element_count = count >> 2;
|
|
|
|
|
|
dmaengine_slave_config(mcspi_dma->dma_rx, &cfg);
|
|
|
|
/*
|
|
* Reduce DMA transfer length by one more if McSPI is
|
|
* configured in turbo mode.
|
|
*/
|
|
if ((l & OMAP2_MCSPI_CHCONF_TURBO) && mcspi->fifo_depth == 0)
|
|
transfer_reduction += es;
|
|
|
|
if (transfer_reduction) {
|
|
/* Split sgl into two. The second sgl won't be used. */
|
|
sizes[0] = count - transfer_reduction;
|
|
sizes[1] = transfer_reduction;
|
|
nb_sizes = 2;
|
|
} else {
|
|
/*
|
|
* Don't bother splitting the sgl. This essentially
|
|
* clones the original sgl.
|
|
*/
|
|
sizes[0] = count;
|
|
nb_sizes = 1;
|
|
}
|
|
|
|
ret = sg_split(xfer->rx_sg.sgl, xfer->rx_sg.nents, 0, nb_sizes,
|
|
sizes, sg_out, out_mapped_nents, GFP_KERNEL);
|
|
|
|
if (ret < 0) {
|
|
dev_err(&spi->dev, "sg_split failed\n");
|
|
return 0;
|
|
}
|
|
|
|
tx = dmaengine_prep_slave_sg(mcspi_dma->dma_rx, sg_out[0],
|
|
out_mapped_nents[0], DMA_DEV_TO_MEM,
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
if (tx) {
|
|
tx->callback = omap2_mcspi_rx_callback;
|
|
tx->callback_param = spi;
|
|
dmaengine_submit(tx);
|
|
} else {
|
|
/* FIXME: fall back to PIO? */
|
|
}
|
|
|
|
dma_async_issue_pending(mcspi_dma->dma_rx);
|
|
omap2_mcspi_set_dma_req(spi, 1, 1);
|
|
|
|
ret = mcspi_wait_for_completion(mcspi, &mcspi_dma->dma_rx_completion);
|
|
if (ret || mcspi->target_aborted) {
|
|
dmaengine_terminate_sync(mcspi_dma->dma_rx);
|
|
omap2_mcspi_set_dma_req(spi, 1, 0);
|
|
return 0;
|
|
}
|
|
|
|
for (x = 0; x < nb_sizes; x++)
|
|
kfree(sg_out[x]);
|
|
|
|
if (mcspi->fifo_depth > 0)
|
|
return count;
|
|
|
|
/*
|
|
* Due to the DMA transfer length reduction the missing bytes must
|
|
* be read manually to receive all of the expected data.
|
|
*/
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
|
|
elements = element_count - 1;
|
|
|
|
if (l & OMAP2_MCSPI_CHCONF_TURBO) {
|
|
elements--;
|
|
|
|
if (!mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_RXS)) {
|
|
u32 w;
|
|
|
|
w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0);
|
|
if (word_len <= 8)
|
|
((u8 *)xfer->rx_buf)[elements++] = w;
|
|
else if (word_len <= 16)
|
|
((u16 *)xfer->rx_buf)[elements++] = w;
|
|
else /* word_len <= 32 */
|
|
((u32 *)xfer->rx_buf)[elements++] = w;
|
|
} else {
|
|
int bytes_per_word = mcspi_bytes_per_word(word_len);
|
|
dev_err(&spi->dev, "DMA RX penultimate word empty\n");
|
|
count -= (bytes_per_word << 1);
|
|
omap2_mcspi_set_enable(spi, 1);
|
|
return count;
|
|
}
|
|
}
|
|
if (!mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_RXS)) {
|
|
u32 w;
|
|
|
|
w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0);
|
|
if (word_len <= 8)
|
|
((u8 *)xfer->rx_buf)[elements] = w;
|
|
else if (word_len <= 16)
|
|
((u16 *)xfer->rx_buf)[elements] = w;
|
|
else /* word_len <= 32 */
|
|
((u32 *)xfer->rx_buf)[elements] = w;
|
|
} else {
|
|
dev_err(&spi->dev, "DMA RX last word empty\n");
|
|
count -= mcspi_bytes_per_word(word_len);
|
|
}
|
|
omap2_mcspi_set_enable(spi, 1);
|
|
return count;
|
|
}
|
|
|
|
static unsigned
|
|
omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
|
|
{
|
|
struct omap2_mcspi *mcspi;
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
struct omap2_mcspi_dma *mcspi_dma;
|
|
unsigned int count;
|
|
u8 *rx;
|
|
const u8 *tx;
|
|
struct dma_slave_config cfg;
|
|
enum dma_slave_buswidth width;
|
|
unsigned es;
|
|
void __iomem *chstat_reg;
|
|
void __iomem *irqstat_reg;
|
|
int wait_res;
|
|
|
|
mcspi = spi_controller_get_devdata(spi->controller);
|
|
mcspi_dma = &mcspi->dma_channels[spi_get_chipselect(spi, 0)];
|
|
|
|
if (cs->word_len <= 8) {
|
|
width = DMA_SLAVE_BUSWIDTH_1_BYTE;
|
|
es = 1;
|
|
} else if (cs->word_len <= 16) {
|
|
width = DMA_SLAVE_BUSWIDTH_2_BYTES;
|
|
es = 2;
|
|
} else {
|
|
width = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
|
es = 4;
|
|
}
|
|
|
|
count = xfer->len;
|
|
|
|
memset(&cfg, 0, sizeof(cfg));
|
|
cfg.src_addr = cs->phys + OMAP2_MCSPI_RX0;
|
|
cfg.dst_addr = cs->phys + OMAP2_MCSPI_TX0;
|
|
cfg.src_addr_width = width;
|
|
cfg.dst_addr_width = width;
|
|
cfg.src_maxburst = 1;
|
|
cfg.dst_maxburst = 1;
|
|
|
|
rx = xfer->rx_buf;
|
|
tx = xfer->tx_buf;
|
|
|
|
mcspi->target_aborted = false;
|
|
reinit_completion(&mcspi_dma->dma_tx_completion);
|
|
reinit_completion(&mcspi_dma->dma_rx_completion);
|
|
reinit_completion(&mcspi->txdone);
|
|
if (tx) {
|
|
/* Enable EOW IRQ to know end of tx in target mode */
|
|
if (spi_controller_is_target(spi->controller))
|
|
mcspi_write_reg(spi->controller,
|
|
OMAP2_MCSPI_IRQENABLE,
|
|
OMAP2_MCSPI_IRQSTATUS_EOW);
|
|
omap2_mcspi_tx_dma(spi, xfer, cfg);
|
|
}
|
|
|
|
if (rx != NULL)
|
|
count = omap2_mcspi_rx_dma(spi, xfer, cfg, es);
|
|
|
|
if (tx != NULL) {
|
|
int ret;
|
|
|
|
ret = mcspi_wait_for_completion(mcspi, &mcspi_dma->dma_tx_completion);
|
|
if (ret || mcspi->target_aborted) {
|
|
dmaengine_terminate_sync(mcspi_dma->dma_tx);
|
|
omap2_mcspi_set_dma_req(spi, 0, 0);
|
|
return 0;
|
|
}
|
|
|
|
if (spi_controller_is_target(mcspi->ctlr)) {
|
|
ret = mcspi_wait_for_completion(mcspi, &mcspi->txdone);
|
|
if (ret || mcspi->target_aborted)
|
|
return 0;
|
|
}
|
|
|
|
if (mcspi->fifo_depth > 0) {
|
|
irqstat_reg = mcspi->base + OMAP2_MCSPI_IRQSTATUS;
|
|
|
|
if (mcspi_wait_for_reg_bit(irqstat_reg,
|
|
OMAP2_MCSPI_IRQSTATUS_EOW) < 0)
|
|
dev_err(&spi->dev, "EOW timed out\n");
|
|
|
|
mcspi_write_reg(mcspi->ctlr, OMAP2_MCSPI_IRQSTATUS,
|
|
OMAP2_MCSPI_IRQSTATUS_EOW);
|
|
}
|
|
|
|
/* for TX_ONLY mode, be sure all words have shifted out */
|
|
if (rx == NULL) {
|
|
chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0;
|
|
if (mcspi->fifo_depth > 0) {
|
|
wait_res = mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_TXFFE);
|
|
if (wait_res < 0)
|
|
dev_err(&spi->dev, "TXFFE timed out\n");
|
|
} else {
|
|
wait_res = mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_TXS);
|
|
if (wait_res < 0)
|
|
dev_err(&spi->dev, "TXS timed out\n");
|
|
}
|
|
if (wait_res >= 0 &&
|
|
(mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_EOT) < 0))
|
|
dev_err(&spi->dev, "EOT timed out\n");
|
|
}
|
|
}
|
|
return count;
|
|
}
|
|
|
|
static unsigned
|
|
omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
|
|
{
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
unsigned int count, c;
|
|
u32 l;
|
|
void __iomem *base = cs->base;
|
|
void __iomem *tx_reg;
|
|
void __iomem *rx_reg;
|
|
void __iomem *chstat_reg;
|
|
int word_len;
|
|
|
|
count = xfer->len;
|
|
c = count;
|
|
word_len = cs->word_len;
|
|
|
|
l = mcspi_cached_chconf0(spi);
|
|
|
|
/* We store the pre-calculated register addresses on stack to speed
|
|
* up the transfer loop. */
|
|
tx_reg = base + OMAP2_MCSPI_TX0;
|
|
rx_reg = base + OMAP2_MCSPI_RX0;
|
|
chstat_reg = base + OMAP2_MCSPI_CHSTAT0;
|
|
|
|
if (c < (word_len>>3))
|
|
return 0;
|
|
|
|
if (word_len <= 8) {
|
|
u8 *rx;
|
|
const u8 *tx;
|
|
|
|
rx = xfer->rx_buf;
|
|
tx = xfer->tx_buf;
|
|
|
|
do {
|
|
c -= 1;
|
|
if (tx != NULL) {
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_TXS) < 0) {
|
|
dev_err(&spi->dev, "TXS timed out\n");
|
|
goto out;
|
|
}
|
|
dev_vdbg(&spi->dev, "write-%d %02x\n",
|
|
word_len, *tx);
|
|
writel_relaxed(*tx++, tx_reg);
|
|
}
|
|
if (rx != NULL) {
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_RXS) < 0) {
|
|
dev_err(&spi->dev, "RXS timed out\n");
|
|
goto out;
|
|
}
|
|
|
|
if (c == 1 && tx == NULL &&
|
|
(l & OMAP2_MCSPI_CHCONF_TURBO)) {
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
*rx++ = readl_relaxed(rx_reg);
|
|
dev_vdbg(&spi->dev, "read-%d %02x\n",
|
|
word_len, *(rx - 1));
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_RXS) < 0) {
|
|
dev_err(&spi->dev,
|
|
"RXS timed out\n");
|
|
goto out;
|
|
}
|
|
c = 0;
|
|
} else if (c == 0 && tx == NULL) {
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
}
|
|
|
|
*rx++ = readl_relaxed(rx_reg);
|
|
dev_vdbg(&spi->dev, "read-%d %02x\n",
|
|
word_len, *(rx - 1));
|
|
}
|
|
/* Add word delay between each word */
|
|
spi_delay_exec(&xfer->word_delay, xfer);
|
|
} while (c);
|
|
} else if (word_len <= 16) {
|
|
u16 *rx;
|
|
const u16 *tx;
|
|
|
|
rx = xfer->rx_buf;
|
|
tx = xfer->tx_buf;
|
|
do {
|
|
c -= 2;
|
|
if (tx != NULL) {
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_TXS) < 0) {
|
|
dev_err(&spi->dev, "TXS timed out\n");
|
|
goto out;
|
|
}
|
|
dev_vdbg(&spi->dev, "write-%d %04x\n",
|
|
word_len, *tx);
|
|
writel_relaxed(*tx++, tx_reg);
|
|
}
|
|
if (rx != NULL) {
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_RXS) < 0) {
|
|
dev_err(&spi->dev, "RXS timed out\n");
|
|
goto out;
|
|
}
|
|
|
|
if (c == 2 && tx == NULL &&
|
|
(l & OMAP2_MCSPI_CHCONF_TURBO)) {
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
*rx++ = readl_relaxed(rx_reg);
|
|
dev_vdbg(&spi->dev, "read-%d %04x\n",
|
|
word_len, *(rx - 1));
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_RXS) < 0) {
|
|
dev_err(&spi->dev,
|
|
"RXS timed out\n");
|
|
goto out;
|
|
}
|
|
c = 0;
|
|
} else if (c == 0 && tx == NULL) {
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
}
|
|
|
|
*rx++ = readl_relaxed(rx_reg);
|
|
dev_vdbg(&spi->dev, "read-%d %04x\n",
|
|
word_len, *(rx - 1));
|
|
}
|
|
/* Add word delay between each word */
|
|
spi_delay_exec(&xfer->word_delay, xfer);
|
|
} while (c >= 2);
|
|
} else if (word_len <= 32) {
|
|
u32 *rx;
|
|
const u32 *tx;
|
|
|
|
rx = xfer->rx_buf;
|
|
tx = xfer->tx_buf;
|
|
do {
|
|
c -= 4;
|
|
if (tx != NULL) {
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_TXS) < 0) {
|
|
dev_err(&spi->dev, "TXS timed out\n");
|
|
goto out;
|
|
}
|
|
dev_vdbg(&spi->dev, "write-%d %08x\n",
|
|
word_len, *tx);
|
|
writel_relaxed(*tx++, tx_reg);
|
|
}
|
|
if (rx != NULL) {
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_RXS) < 0) {
|
|
dev_err(&spi->dev, "RXS timed out\n");
|
|
goto out;
|
|
}
|
|
|
|
if (c == 4 && tx == NULL &&
|
|
(l & OMAP2_MCSPI_CHCONF_TURBO)) {
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
*rx++ = readl_relaxed(rx_reg);
|
|
dev_vdbg(&spi->dev, "read-%d %08x\n",
|
|
word_len, *(rx - 1));
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_RXS) < 0) {
|
|
dev_err(&spi->dev,
|
|
"RXS timed out\n");
|
|
goto out;
|
|
}
|
|
c = 0;
|
|
} else if (c == 0 && tx == NULL) {
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
}
|
|
|
|
*rx++ = readl_relaxed(rx_reg);
|
|
dev_vdbg(&spi->dev, "read-%d %08x\n",
|
|
word_len, *(rx - 1));
|
|
}
|
|
/* Add word delay between each word */
|
|
spi_delay_exec(&xfer->word_delay, xfer);
|
|
} while (c >= 4);
|
|
}
|
|
|
|
/* for TX_ONLY mode, be sure all words have shifted out */
|
|
if (xfer->rx_buf == NULL) {
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_TXS) < 0) {
|
|
dev_err(&spi->dev, "TXS timed out\n");
|
|
} else if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_EOT) < 0)
|
|
dev_err(&spi->dev, "EOT timed out\n");
|
|
|
|
/* disable chan to purge rx datas received in TX_ONLY transfer,
|
|
* otherwise these rx datas will affect the direct following
|
|
* RX_ONLY transfer.
|
|
*/
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
}
|
|
out:
|
|
omap2_mcspi_set_enable(spi, 1);
|
|
return count - c;
|
|
}
|
|
|
|
static unsigned
|
|
omap2_mcspi_txrx_piofifo(struct spi_device *spi, struct spi_transfer *xfer)
|
|
{
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
struct omap2_mcspi *mcspi;
|
|
unsigned int count, c;
|
|
unsigned int iter, cwc;
|
|
int last_request;
|
|
void __iomem *base = cs->base;
|
|
void __iomem *tx_reg;
|
|
void __iomem *rx_reg;
|
|
void __iomem *chstat_reg;
|
|
void __iomem *irqstat_reg;
|
|
int word_len, bytes_per_word;
|
|
u8 *rx;
|
|
const u8 *tx;
|
|
|
|
mcspi = spi_controller_get_devdata(spi->controller);
|
|
count = xfer->len;
|
|
c = count;
|
|
word_len = cs->word_len;
|
|
bytes_per_word = mcspi_bytes_per_word(word_len);
|
|
|
|
/*
|
|
* We store the pre-calculated register addresses on stack to speed
|
|
* up the transfer loop.
|
|
*/
|
|
tx_reg = base + OMAP2_MCSPI_TX0;
|
|
rx_reg = base + OMAP2_MCSPI_RX0;
|
|
chstat_reg = base + OMAP2_MCSPI_CHSTAT0;
|
|
irqstat_reg = base + OMAP2_MCSPI_IRQSTATUS;
|
|
|
|
if (c < (word_len >> 3))
|
|
return 0;
|
|
|
|
rx = xfer->rx_buf;
|
|
tx = xfer->tx_buf;
|
|
|
|
do {
|
|
/* calculate number of words in current iteration */
|
|
cwc = min((unsigned int)mcspi->fifo_depth / bytes_per_word,
|
|
c / bytes_per_word);
|
|
last_request = cwc != (mcspi->fifo_depth / bytes_per_word);
|
|
if (tx) {
|
|
if (mcspi_wait_for_reg_bit(irqstat_reg,
|
|
OMAP2_MCSPI_IRQSTATUS_TX0_EMPTY) < 0) {
|
|
dev_err(&spi->dev, "TX Empty timed out\n");
|
|
goto out;
|
|
}
|
|
writel_relaxed(OMAP2_MCSPI_IRQSTATUS_TX0_EMPTY, irqstat_reg);
|
|
|
|
for (iter = 0; iter < cwc; iter++, tx += bytes_per_word) {
|
|
if (bytes_per_word == 1)
|
|
writel_relaxed(*tx, tx_reg);
|
|
else if (bytes_per_word == 2)
|
|
writel_relaxed(*((u16 *)tx), tx_reg);
|
|
else if (bytes_per_word == 4)
|
|
writel_relaxed(*((u32 *)tx), tx_reg);
|
|
}
|
|
}
|
|
|
|
if (rx) {
|
|
if (!last_request &&
|
|
mcspi_wait_for_reg_bit(irqstat_reg,
|
|
OMAP2_MCSPI_IRQSTATUS_RX0_FULL) < 0) {
|
|
dev_err(&spi->dev, "RX_FULL timed out\n");
|
|
goto out;
|
|
}
|
|
writel_relaxed(OMAP2_MCSPI_IRQSTATUS_RX0_FULL, irqstat_reg);
|
|
|
|
for (iter = 0; iter < cwc; iter++, rx += bytes_per_word) {
|
|
if (last_request &&
|
|
mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_RXS) < 0) {
|
|
dev_err(&spi->dev, "RXS timed out\n");
|
|
goto out;
|
|
}
|
|
if (bytes_per_word == 1)
|
|
*rx = readl_relaxed(rx_reg);
|
|
else if (bytes_per_word == 2)
|
|
*((u16 *)rx) = readl_relaxed(rx_reg);
|
|
else if (bytes_per_word == 4)
|
|
*((u32 *)rx) = readl_relaxed(rx_reg);
|
|
}
|
|
}
|
|
|
|
if (last_request) {
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_EOT) < 0) {
|
|
dev_err(&spi->dev, "EOT timed out\n");
|
|
goto out;
|
|
}
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_TXFFE) < 0) {
|
|
dev_err(&spi->dev, "TXFFE timed out\n");
|
|
goto out;
|
|
}
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
}
|
|
c -= cwc * bytes_per_word;
|
|
} while (c >= bytes_per_word);
|
|
|
|
out:
|
|
omap2_mcspi_set_enable(spi, 1);
|
|
return count - c;
|
|
}
|
|
|
|
static u32 omap2_mcspi_calc_divisor(u32 speed_hz, u32 ref_clk_hz)
|
|
{
|
|
u32 div;
|
|
|
|
for (div = 0; div < 15; div++)
|
|
if (speed_hz >= (ref_clk_hz >> div))
|
|
return div;
|
|
|
|
return 15;
|
|
}
|
|
|
|
/* called only when no transfer is active to this device */
|
|
static int omap2_mcspi_setup_transfer(struct spi_device *spi,
|
|
struct spi_transfer *t)
|
|
{
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
struct omap2_mcspi *mcspi;
|
|
u32 ref_clk_hz, l = 0, clkd = 0, div, extclk = 0, clkg = 0;
|
|
u8 word_len = spi->bits_per_word;
|
|
u32 speed_hz = spi->max_speed_hz;
|
|
|
|
mcspi = spi_controller_get_devdata(spi->controller);
|
|
|
|
if (t != NULL && t->bits_per_word)
|
|
word_len = t->bits_per_word;
|
|
|
|
cs->word_len = word_len;
|
|
|
|
if (t && t->speed_hz)
|
|
speed_hz = t->speed_hz;
|
|
|
|
ref_clk_hz = mcspi->ref_clk_hz;
|
|
speed_hz = min_t(u32, speed_hz, ref_clk_hz);
|
|
if (speed_hz < (ref_clk_hz / OMAP2_MCSPI_MAX_DIVIDER)) {
|
|
clkd = omap2_mcspi_calc_divisor(speed_hz, ref_clk_hz);
|
|
speed_hz = ref_clk_hz >> clkd;
|
|
clkg = 0;
|
|
} else {
|
|
div = (ref_clk_hz + speed_hz - 1) / speed_hz;
|
|
speed_hz = ref_clk_hz / div;
|
|
clkd = (div - 1) & 0xf;
|
|
extclk = (div - 1) >> 4;
|
|
clkg = OMAP2_MCSPI_CHCONF_CLKG;
|
|
}
|
|
|
|
l = mcspi_cached_chconf0(spi);
|
|
|
|
/* standard 4-wire host mode: SCK, MOSI/out, MISO/in, nCS
|
|
* REVISIT: this controller could support SPI_3WIRE mode.
|
|
*/
|
|
if (mcspi->pin_dir == MCSPI_PINDIR_D0_IN_D1_OUT) {
|
|
l &= ~OMAP2_MCSPI_CHCONF_IS;
|
|
l &= ~OMAP2_MCSPI_CHCONF_DPE1;
|
|
l |= OMAP2_MCSPI_CHCONF_DPE0;
|
|
} else {
|
|
l |= OMAP2_MCSPI_CHCONF_IS;
|
|
l |= OMAP2_MCSPI_CHCONF_DPE1;
|
|
l &= ~OMAP2_MCSPI_CHCONF_DPE0;
|
|
}
|
|
|
|
/* wordlength */
|
|
l &= ~OMAP2_MCSPI_CHCONF_WL_MASK;
|
|
l |= (word_len - 1) << 7;
|
|
|
|
/* set chipselect polarity; manage with FORCE */
|
|
if (!(spi->mode & SPI_CS_HIGH))
|
|
l |= OMAP2_MCSPI_CHCONF_EPOL; /* active-low; normal */
|
|
else
|
|
l &= ~OMAP2_MCSPI_CHCONF_EPOL;
|
|
|
|
/* set clock divisor */
|
|
l &= ~OMAP2_MCSPI_CHCONF_CLKD_MASK;
|
|
l |= clkd << 2;
|
|
|
|
/* set clock granularity */
|
|
l &= ~OMAP2_MCSPI_CHCONF_CLKG;
|
|
l |= clkg;
|
|
if (clkg) {
|
|
cs->chctrl0 &= ~OMAP2_MCSPI_CHCTRL_EXTCLK_MASK;
|
|
cs->chctrl0 |= extclk << 8;
|
|
mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCTRL0, cs->chctrl0);
|
|
}
|
|
|
|
/* set SPI mode 0..3 */
|
|
if (spi->mode & SPI_CPOL)
|
|
l |= OMAP2_MCSPI_CHCONF_POL;
|
|
else
|
|
l &= ~OMAP2_MCSPI_CHCONF_POL;
|
|
if (spi->mode & SPI_CPHA)
|
|
l |= OMAP2_MCSPI_CHCONF_PHA;
|
|
else
|
|
l &= ~OMAP2_MCSPI_CHCONF_PHA;
|
|
|
|
mcspi_write_chconf0(spi, l);
|
|
|
|
cs->mode = spi->mode;
|
|
|
|
dev_dbg(&spi->dev, "setup: speed %d, sample %s edge, clk %s\n",
|
|
speed_hz,
|
|
(spi->mode & SPI_CPHA) ? "trailing" : "leading",
|
|
(spi->mode & SPI_CPOL) ? "inverted" : "normal");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Note that we currently allow DMA only if we get a channel
|
|
* for both rx and tx. Otherwise we'll do PIO for both rx and tx.
|
|
*/
|
|
static int omap2_mcspi_request_dma(struct omap2_mcspi *mcspi,
|
|
struct omap2_mcspi_dma *mcspi_dma)
|
|
{
|
|
int ret = 0;
|
|
|
|
mcspi_dma->dma_rx = dma_request_chan(mcspi->dev,
|
|
mcspi_dma->dma_rx_ch_name);
|
|
if (IS_ERR(mcspi_dma->dma_rx)) {
|
|
ret = PTR_ERR(mcspi_dma->dma_rx);
|
|
mcspi_dma->dma_rx = NULL;
|
|
goto no_dma;
|
|
}
|
|
|
|
mcspi_dma->dma_tx = dma_request_chan(mcspi->dev,
|
|
mcspi_dma->dma_tx_ch_name);
|
|
if (IS_ERR(mcspi_dma->dma_tx)) {
|
|
ret = PTR_ERR(mcspi_dma->dma_tx);
|
|
mcspi_dma->dma_tx = NULL;
|
|
dma_release_channel(mcspi_dma->dma_rx);
|
|
mcspi_dma->dma_rx = NULL;
|
|
}
|
|
|
|
init_completion(&mcspi_dma->dma_rx_completion);
|
|
init_completion(&mcspi_dma->dma_tx_completion);
|
|
|
|
no_dma:
|
|
return ret;
|
|
}
|
|
|
|
static void omap2_mcspi_release_dma(struct spi_controller *ctlr)
|
|
{
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(ctlr);
|
|
struct omap2_mcspi_dma *mcspi_dma;
|
|
int i;
|
|
|
|
for (i = 0; i < ctlr->num_chipselect; i++) {
|
|
mcspi_dma = &mcspi->dma_channels[i];
|
|
|
|
if (mcspi_dma->dma_rx) {
|
|
dma_release_channel(mcspi_dma->dma_rx);
|
|
mcspi_dma->dma_rx = NULL;
|
|
}
|
|
if (mcspi_dma->dma_tx) {
|
|
dma_release_channel(mcspi_dma->dma_tx);
|
|
mcspi_dma->dma_tx = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void omap2_mcspi_cleanup(struct spi_device *spi)
|
|
{
|
|
struct omap2_mcspi_cs *cs;
|
|
|
|
if (spi->controller_state) {
|
|
/* Unlink controller state from context save list */
|
|
cs = spi->controller_state;
|
|
list_del(&cs->node);
|
|
|
|
kfree(cs);
|
|
}
|
|
}
|
|
|
|
static int omap2_mcspi_setup(struct spi_device *spi)
|
|
{
|
|
bool initial_setup = false;
|
|
int ret;
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(spi->controller);
|
|
struct omap2_mcspi_regs *ctx = &mcspi->ctx;
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
|
|
if (!cs) {
|
|
cs = kzalloc(sizeof(*cs), GFP_KERNEL);
|
|
if (!cs)
|
|
return -ENOMEM;
|
|
cs->base = mcspi->base + spi_get_chipselect(spi, 0) * 0x14;
|
|
cs->phys = mcspi->phys + spi_get_chipselect(spi, 0) * 0x14;
|
|
cs->mode = 0;
|
|
cs->chconf0 = 0;
|
|
cs->chctrl0 = 0;
|
|
spi->controller_state = cs;
|
|
/* Link this to context save list */
|
|
list_add_tail(&cs->node, &ctx->cs);
|
|
initial_setup = true;
|
|
}
|
|
|
|
ret = pm_runtime_resume_and_get(mcspi->dev);
|
|
if (ret < 0) {
|
|
if (initial_setup)
|
|
omap2_mcspi_cleanup(spi);
|
|
|
|
return ret;
|
|
}
|
|
|
|
ret = omap2_mcspi_setup_transfer(spi, NULL);
|
|
if (ret && initial_setup)
|
|
omap2_mcspi_cleanup(spi);
|
|
|
|
pm_runtime_mark_last_busy(mcspi->dev);
|
|
pm_runtime_put_autosuspend(mcspi->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t omap2_mcspi_irq_handler(int irq, void *data)
|
|
{
|
|
struct omap2_mcspi *mcspi = data;
|
|
u32 irqstat;
|
|
|
|
irqstat = mcspi_read_reg(mcspi->ctlr, OMAP2_MCSPI_IRQSTATUS);
|
|
if (!irqstat)
|
|
return IRQ_NONE;
|
|
|
|
/* Disable IRQ and wakeup target xfer task */
|
|
mcspi_write_reg(mcspi->ctlr, OMAP2_MCSPI_IRQENABLE, 0);
|
|
if (irqstat & OMAP2_MCSPI_IRQSTATUS_EOW)
|
|
complete(&mcspi->txdone);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int omap2_mcspi_target_abort(struct spi_controller *ctlr)
|
|
{
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(ctlr);
|
|
struct omap2_mcspi_dma *mcspi_dma = mcspi->dma_channels;
|
|
|
|
mcspi->target_aborted = true;
|
|
complete(&mcspi_dma->dma_rx_completion);
|
|
complete(&mcspi_dma->dma_tx_completion);
|
|
complete(&mcspi->txdone);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap2_mcspi_transfer_one(struct spi_controller *ctlr,
|
|
struct spi_device *spi,
|
|
struct spi_transfer *t)
|
|
{
|
|
|
|
/* We only enable one channel at a time -- the one whose message is
|
|
* -- although this controller would gladly
|
|
* arbitrate among multiple channels. This corresponds to "single
|
|
* channel" host mode. As a side effect, we need to manage the
|
|
* chipselect with the FORCE bit ... CS != channel enable.
|
|
*/
|
|
|
|
struct omap2_mcspi *mcspi;
|
|
struct omap2_mcspi_dma *mcspi_dma;
|
|
struct omap2_mcspi_cs *cs;
|
|
struct omap2_mcspi_device_config *cd;
|
|
int par_override = 0;
|
|
int status = 0;
|
|
u32 chconf;
|
|
|
|
mcspi = spi_controller_get_devdata(ctlr);
|
|
mcspi_dma = mcspi->dma_channels + spi_get_chipselect(spi, 0);
|
|
cs = spi->controller_state;
|
|
cd = spi->controller_data;
|
|
|
|
/*
|
|
* The target driver could have changed spi->mode in which case
|
|
* it will be different from cs->mode (the current hardware setup).
|
|
* If so, set par_override (even though its not a parity issue) so
|
|
* omap2_mcspi_setup_transfer will be called to configure the hardware
|
|
* with the correct mode on the first iteration of the loop below.
|
|
*/
|
|
if (spi->mode != cs->mode)
|
|
par_override = 1;
|
|
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
|
|
if (spi_get_csgpiod(spi, 0))
|
|
omap2_mcspi_set_cs(spi, spi->mode & SPI_CS_HIGH);
|
|
|
|
if (par_override ||
|
|
(t->speed_hz != spi->max_speed_hz) ||
|
|
(t->bits_per_word != spi->bits_per_word)) {
|
|
par_override = 1;
|
|
status = omap2_mcspi_setup_transfer(spi, t);
|
|
if (status < 0)
|
|
goto out;
|
|
if (t->speed_hz == spi->max_speed_hz &&
|
|
t->bits_per_word == spi->bits_per_word)
|
|
par_override = 0;
|
|
}
|
|
if (cd && cd->cs_per_word) {
|
|
chconf = mcspi->ctx.modulctrl;
|
|
chconf &= ~OMAP2_MCSPI_MODULCTRL_SINGLE;
|
|
mcspi_write_reg(ctlr, OMAP2_MCSPI_MODULCTRL, chconf);
|
|
mcspi->ctx.modulctrl =
|
|
mcspi_read_cs_reg(spi, OMAP2_MCSPI_MODULCTRL);
|
|
}
|
|
|
|
chconf = mcspi_cached_chconf0(spi);
|
|
chconf &= ~OMAP2_MCSPI_CHCONF_TRM_MASK;
|
|
chconf &= ~OMAP2_MCSPI_CHCONF_TURBO;
|
|
|
|
if (t->tx_buf == NULL)
|
|
chconf |= OMAP2_MCSPI_CHCONF_TRM_RX_ONLY;
|
|
else if (t->rx_buf == NULL)
|
|
chconf |= OMAP2_MCSPI_CHCONF_TRM_TX_ONLY;
|
|
|
|
if (cd && cd->turbo_mode && t->tx_buf == NULL) {
|
|
/* Turbo mode is for more than one word */
|
|
if (t->len > ((cs->word_len + 7) >> 3))
|
|
chconf |= OMAP2_MCSPI_CHCONF_TURBO;
|
|
}
|
|
|
|
mcspi_write_chconf0(spi, chconf);
|
|
|
|
if (t->len) {
|
|
unsigned count;
|
|
|
|
if ((mcspi_dma->dma_rx && mcspi_dma->dma_tx) &&
|
|
ctlr->cur_msg_mapped &&
|
|
ctlr->can_dma(ctlr, spi, t))
|
|
omap2_mcspi_set_fifo(spi, t, 1, 1);
|
|
else if (t->len > OMAP2_MCSPI_MAX_FIFODEPTH)
|
|
omap2_mcspi_set_fifo(spi, t, 1, 0);
|
|
|
|
omap2_mcspi_set_enable(spi, 1);
|
|
|
|
/* RX_ONLY mode needs dummy data in TX reg */
|
|
if (t->tx_buf == NULL)
|
|
writel_relaxed(0, cs->base
|
|
+ OMAP2_MCSPI_TX0);
|
|
|
|
if ((mcspi_dma->dma_rx && mcspi_dma->dma_tx) &&
|
|
ctlr->cur_msg_mapped &&
|
|
ctlr->can_dma(ctlr, spi, t))
|
|
count = omap2_mcspi_txrx_dma(spi, t);
|
|
else if (mcspi->fifo_depth > 0)
|
|
count = omap2_mcspi_txrx_piofifo(spi, t);
|
|
else
|
|
count = omap2_mcspi_txrx_pio(spi, t);
|
|
|
|
if (count != t->len) {
|
|
status = -EIO;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
|
|
if (mcspi->fifo_depth > 0)
|
|
omap2_mcspi_set_fifo(spi, t, 0, 0);
|
|
|
|
out:
|
|
/* Restore defaults if they were overriden */
|
|
if (par_override) {
|
|
par_override = 0;
|
|
status = omap2_mcspi_setup_transfer(spi, NULL);
|
|
}
|
|
|
|
if (cd && cd->cs_per_word) {
|
|
chconf = mcspi->ctx.modulctrl;
|
|
chconf |= OMAP2_MCSPI_MODULCTRL_SINGLE;
|
|
mcspi_write_reg(ctlr, OMAP2_MCSPI_MODULCTRL, chconf);
|
|
mcspi->ctx.modulctrl =
|
|
mcspi_read_cs_reg(spi, OMAP2_MCSPI_MODULCTRL);
|
|
}
|
|
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
|
|
if (spi_get_csgpiod(spi, 0))
|
|
omap2_mcspi_set_cs(spi, !(spi->mode & SPI_CS_HIGH));
|
|
|
|
if (mcspi->fifo_depth > 0 && t)
|
|
omap2_mcspi_set_fifo(spi, t, 0, 0);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int omap2_mcspi_prepare_message(struct spi_controller *ctlr,
|
|
struct spi_message *msg)
|
|
{
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(ctlr);
|
|
struct omap2_mcspi_regs *ctx = &mcspi->ctx;
|
|
struct omap2_mcspi_cs *cs;
|
|
|
|
/* Only a single channel can have the FORCE bit enabled
|
|
* in its chconf0 register.
|
|
* Scan all channels and disable them except the current one.
|
|
* A FORCE can remain from a last transfer having cs_change enabled
|
|
*/
|
|
list_for_each_entry(cs, &ctx->cs, node) {
|
|
if (msg->spi->controller_state == cs)
|
|
continue;
|
|
|
|
if ((cs->chconf0 & OMAP2_MCSPI_CHCONF_FORCE)) {
|
|
cs->chconf0 &= ~OMAP2_MCSPI_CHCONF_FORCE;
|
|
writel_relaxed(cs->chconf0,
|
|
cs->base + OMAP2_MCSPI_CHCONF0);
|
|
readl_relaxed(cs->base + OMAP2_MCSPI_CHCONF0);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool omap2_mcspi_can_dma(struct spi_controller *ctlr,
|
|
struct spi_device *spi,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(spi->controller);
|
|
struct omap2_mcspi_dma *mcspi_dma =
|
|
&mcspi->dma_channels[spi_get_chipselect(spi, 0)];
|
|
|
|
if (!mcspi_dma->dma_rx || !mcspi_dma->dma_tx)
|
|
return false;
|
|
|
|
if (spi_controller_is_target(ctlr))
|
|
return true;
|
|
|
|
ctlr->dma_rx = mcspi_dma->dma_rx;
|
|
ctlr->dma_tx = mcspi_dma->dma_tx;
|
|
|
|
return (xfer->len >= DMA_MIN_BYTES);
|
|
}
|
|
|
|
static size_t omap2_mcspi_max_xfer_size(struct spi_device *spi)
|
|
{
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(spi->controller);
|
|
struct omap2_mcspi_dma *mcspi_dma =
|
|
&mcspi->dma_channels[spi_get_chipselect(spi, 0)];
|
|
|
|
if (mcspi->max_xfer_len && mcspi_dma->dma_rx)
|
|
return mcspi->max_xfer_len;
|
|
|
|
return SIZE_MAX;
|
|
}
|
|
|
|
static int omap2_mcspi_controller_setup(struct omap2_mcspi *mcspi)
|
|
{
|
|
struct spi_controller *ctlr = mcspi->ctlr;
|
|
struct omap2_mcspi_regs *ctx = &mcspi->ctx;
|
|
int ret = 0;
|
|
|
|
ret = pm_runtime_resume_and_get(mcspi->dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
mcspi_write_reg(ctlr, OMAP2_MCSPI_WAKEUPENABLE,
|
|
OMAP2_MCSPI_WAKEUPENABLE_WKEN);
|
|
ctx->wakeupenable = OMAP2_MCSPI_WAKEUPENABLE_WKEN;
|
|
|
|
omap2_mcspi_set_mode(ctlr);
|
|
pm_runtime_mark_last_busy(mcspi->dev);
|
|
pm_runtime_put_autosuspend(mcspi->dev);
|
|
return 0;
|
|
}
|
|
|
|
static int omap_mcspi_runtime_suspend(struct device *dev)
|
|
{
|
|
int error;
|
|
|
|
error = pinctrl_pm_select_idle_state(dev);
|
|
if (error)
|
|
dev_warn(dev, "%s: failed to set pins: %i\n", __func__, error);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* When SPI wake up from off-mode, CS is in activate state. If it was in
|
|
* inactive state when driver was suspend, then force it to inactive state at
|
|
* wake up.
|
|
*/
|
|
static int omap_mcspi_runtime_resume(struct device *dev)
|
|
{
|
|
struct spi_controller *ctlr = dev_get_drvdata(dev);
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(ctlr);
|
|
struct omap2_mcspi_regs *ctx = &mcspi->ctx;
|
|
struct omap2_mcspi_cs *cs;
|
|
int error;
|
|
|
|
error = pinctrl_pm_select_default_state(dev);
|
|
if (error)
|
|
dev_warn(dev, "%s: failed to set pins: %i\n", __func__, error);
|
|
|
|
/* McSPI: context restore */
|
|
mcspi_write_reg(ctlr, OMAP2_MCSPI_MODULCTRL, ctx->modulctrl);
|
|
mcspi_write_reg(ctlr, OMAP2_MCSPI_WAKEUPENABLE, ctx->wakeupenable);
|
|
|
|
list_for_each_entry(cs, &ctx->cs, node) {
|
|
/*
|
|
* We need to toggle CS state for OMAP take this
|
|
* change in account.
|
|
*/
|
|
if ((cs->chconf0 & OMAP2_MCSPI_CHCONF_FORCE) == 0) {
|
|
cs->chconf0 |= OMAP2_MCSPI_CHCONF_FORCE;
|
|
writel_relaxed(cs->chconf0,
|
|
cs->base + OMAP2_MCSPI_CHCONF0);
|
|
cs->chconf0 &= ~OMAP2_MCSPI_CHCONF_FORCE;
|
|
writel_relaxed(cs->chconf0,
|
|
cs->base + OMAP2_MCSPI_CHCONF0);
|
|
} else {
|
|
writel_relaxed(cs->chconf0,
|
|
cs->base + OMAP2_MCSPI_CHCONF0);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct omap2_mcspi_platform_config omap2_pdata = {
|
|
.regs_offset = 0,
|
|
};
|
|
|
|
static struct omap2_mcspi_platform_config omap4_pdata = {
|
|
.regs_offset = OMAP4_MCSPI_REG_OFFSET,
|
|
};
|
|
|
|
static struct omap2_mcspi_platform_config am654_pdata = {
|
|
.regs_offset = OMAP4_MCSPI_REG_OFFSET,
|
|
.max_xfer_len = SZ_4K - 1,
|
|
};
|
|
|
|
static const struct of_device_id omap_mcspi_of_match[] = {
|
|
{
|
|
.compatible = "ti,omap2-mcspi",
|
|
.data = &omap2_pdata,
|
|
},
|
|
{
|
|
.compatible = "ti,omap4-mcspi",
|
|
.data = &omap4_pdata,
|
|
},
|
|
{
|
|
.compatible = "ti,am654-mcspi",
|
|
.data = &am654_pdata,
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, omap_mcspi_of_match);
|
|
|
|
static int omap2_mcspi_probe(struct platform_device *pdev)
|
|
{
|
|
struct spi_controller *ctlr;
|
|
const struct omap2_mcspi_platform_config *pdata;
|
|
struct omap2_mcspi *mcspi;
|
|
struct resource *r;
|
|
int status = 0, i;
|
|
u32 regs_offset = 0;
|
|
struct device_node *node = pdev->dev.of_node;
|
|
const struct of_device_id *match;
|
|
|
|
if (of_property_read_bool(node, "spi-slave"))
|
|
ctlr = spi_alloc_target(&pdev->dev, sizeof(*mcspi));
|
|
else
|
|
ctlr = spi_alloc_host(&pdev->dev, sizeof(*mcspi));
|
|
if (!ctlr)
|
|
return -ENOMEM;
|
|
|
|
/* the spi->mode bits understood by this driver: */
|
|
ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
|
|
ctlr->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
|
|
ctlr->setup = omap2_mcspi_setup;
|
|
ctlr->auto_runtime_pm = true;
|
|
ctlr->prepare_message = omap2_mcspi_prepare_message;
|
|
ctlr->can_dma = omap2_mcspi_can_dma;
|
|
ctlr->transfer_one = omap2_mcspi_transfer_one;
|
|
ctlr->set_cs = omap2_mcspi_set_cs;
|
|
ctlr->cleanup = omap2_mcspi_cleanup;
|
|
ctlr->target_abort = omap2_mcspi_target_abort;
|
|
ctlr->dev.of_node = node;
|
|
ctlr->use_gpio_descriptors = true;
|
|
|
|
platform_set_drvdata(pdev, ctlr);
|
|
|
|
mcspi = spi_controller_get_devdata(ctlr);
|
|
mcspi->ctlr = ctlr;
|
|
|
|
match = of_match_device(omap_mcspi_of_match, &pdev->dev);
|
|
if (match) {
|
|
u32 num_cs = 1; /* default number of chipselect */
|
|
pdata = match->data;
|
|
|
|
of_property_read_u32(node, "ti,spi-num-cs", &num_cs);
|
|
ctlr->num_chipselect = num_cs;
|
|
if (of_property_read_bool(node, "ti,pindir-d0-out-d1-in"))
|
|
mcspi->pin_dir = MCSPI_PINDIR_D0_OUT_D1_IN;
|
|
} else {
|
|
pdata = dev_get_platdata(&pdev->dev);
|
|
ctlr->num_chipselect = pdata->num_cs;
|
|
mcspi->pin_dir = pdata->pin_dir;
|
|
}
|
|
regs_offset = pdata->regs_offset;
|
|
if (pdata->max_xfer_len) {
|
|
mcspi->max_xfer_len = pdata->max_xfer_len;
|
|
ctlr->max_transfer_size = omap2_mcspi_max_xfer_size;
|
|
}
|
|
|
|
mcspi->base = devm_platform_get_and_ioremap_resource(pdev, 0, &r);
|
|
if (IS_ERR(mcspi->base)) {
|
|
status = PTR_ERR(mcspi->base);
|
|
goto free_ctlr;
|
|
}
|
|
mcspi->phys = r->start + regs_offset;
|
|
mcspi->base += regs_offset;
|
|
|
|
mcspi->dev = &pdev->dev;
|
|
|
|
INIT_LIST_HEAD(&mcspi->ctx.cs);
|
|
|
|
mcspi->dma_channels = devm_kcalloc(&pdev->dev, ctlr->num_chipselect,
|
|
sizeof(struct omap2_mcspi_dma),
|
|
GFP_KERNEL);
|
|
if (mcspi->dma_channels == NULL) {
|
|
status = -ENOMEM;
|
|
goto free_ctlr;
|
|
}
|
|
|
|
for (i = 0; i < ctlr->num_chipselect; i++) {
|
|
sprintf(mcspi->dma_channels[i].dma_rx_ch_name, "rx%d", i);
|
|
sprintf(mcspi->dma_channels[i].dma_tx_ch_name, "tx%d", i);
|
|
|
|
status = omap2_mcspi_request_dma(mcspi,
|
|
&mcspi->dma_channels[i]);
|
|
if (status == -EPROBE_DEFER)
|
|
goto free_ctlr;
|
|
}
|
|
|
|
status = platform_get_irq(pdev, 0);
|
|
if (status < 0)
|
|
goto free_ctlr;
|
|
init_completion(&mcspi->txdone);
|
|
status = devm_request_irq(&pdev->dev, status,
|
|
omap2_mcspi_irq_handler, 0, pdev->name,
|
|
mcspi);
|
|
if (status) {
|
|
dev_err(&pdev->dev, "Cannot request IRQ");
|
|
goto free_ctlr;
|
|
}
|
|
|
|
mcspi->ref_clk = devm_clk_get_optional_enabled(&pdev->dev, NULL);
|
|
if (mcspi->ref_clk)
|
|
mcspi->ref_clk_hz = clk_get_rate(mcspi->ref_clk);
|
|
else
|
|
mcspi->ref_clk_hz = OMAP2_MCSPI_MAX_FREQ;
|
|
ctlr->max_speed_hz = mcspi->ref_clk_hz;
|
|
ctlr->min_speed_hz = mcspi->ref_clk_hz >> 15;
|
|
|
|
pm_runtime_use_autosuspend(&pdev->dev);
|
|
pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
status = omap2_mcspi_controller_setup(mcspi);
|
|
if (status < 0)
|
|
goto disable_pm;
|
|
|
|
status = devm_spi_register_controller(&pdev->dev, ctlr);
|
|
if (status < 0)
|
|
goto disable_pm;
|
|
|
|
return status;
|
|
|
|
disable_pm:
|
|
pm_runtime_dont_use_autosuspend(&pdev->dev);
|
|
pm_runtime_put_sync(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
free_ctlr:
|
|
omap2_mcspi_release_dma(ctlr);
|
|
spi_controller_put(ctlr);
|
|
return status;
|
|
}
|
|
|
|
static void omap2_mcspi_remove(struct platform_device *pdev)
|
|
{
|
|
struct spi_controller *ctlr = platform_get_drvdata(pdev);
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(ctlr);
|
|
|
|
omap2_mcspi_release_dma(ctlr);
|
|
|
|
pm_runtime_dont_use_autosuspend(mcspi->dev);
|
|
pm_runtime_put_sync(mcspi->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
}
|
|
|
|
/* work with hotplug and coldplug */
|
|
MODULE_ALIAS("platform:omap2_mcspi");
|
|
|
|
static int __maybe_unused omap2_mcspi_suspend(struct device *dev)
|
|
{
|
|
struct spi_controller *ctlr = dev_get_drvdata(dev);
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(ctlr);
|
|
int error;
|
|
|
|
error = pinctrl_pm_select_sleep_state(dev);
|
|
if (error)
|
|
dev_warn(mcspi->dev, "%s: failed to set pins: %i\n",
|
|
__func__, error);
|
|
|
|
error = spi_controller_suspend(ctlr);
|
|
if (error)
|
|
dev_warn(mcspi->dev, "%s: controller suspend failed: %i\n",
|
|
__func__, error);
|
|
|
|
return pm_runtime_force_suspend(dev);
|
|
}
|
|
|
|
static int __maybe_unused omap2_mcspi_resume(struct device *dev)
|
|
{
|
|
struct spi_controller *ctlr = dev_get_drvdata(dev);
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(ctlr);
|
|
int error;
|
|
|
|
error = spi_controller_resume(ctlr);
|
|
if (error)
|
|
dev_warn(mcspi->dev, "%s: controller resume failed: %i\n",
|
|
__func__, error);
|
|
|
|
return pm_runtime_force_resume(dev);
|
|
}
|
|
|
|
static const struct dev_pm_ops omap2_mcspi_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(omap2_mcspi_suspend,
|
|
omap2_mcspi_resume)
|
|
.runtime_suspend = omap_mcspi_runtime_suspend,
|
|
.runtime_resume = omap_mcspi_runtime_resume,
|
|
};
|
|
|
|
static struct platform_driver omap2_mcspi_driver = {
|
|
.driver = {
|
|
.name = "omap2_mcspi",
|
|
.pm = &omap2_mcspi_pm_ops,
|
|
.of_match_table = omap_mcspi_of_match,
|
|
},
|
|
.probe = omap2_mcspi_probe,
|
|
.remove_new = omap2_mcspi_remove,
|
|
};
|
|
|
|
module_platform_driver(omap2_mcspi_driver);
|
|
MODULE_LICENSE("GPL");
|