mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-13 05:54:23 +08:00
d3be83244c
This patch applies the semantic patch: @@ expression I, P, SP; @@ I = devm_iio_device_alloc(P, SP); ... - I->dev.parent = P; It updates 302 files and does 307 deletions. This semantic patch also removes some comments like '/* Establish that the iio_dev is a child of the i2c device */' But this is is only done in case where the block is left empty. The patch does not seem to cover all cases. It looks like in some cases a different variable is used in some cases to assign the parent, but it points to the same reference. In other cases, the block covered by ... may be just too big to be covered by the semantic patch. However, this looks pretty good as well, as it does cover a big bulk of the drivers that should remove the parent assignment. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
272 lines
6.3 KiB
C
272 lines
6.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* mb1232.c - Support for MaxBotix I2CXL-MaxSonar-EZ series ultrasonic
|
|
* ranger with i2c interface
|
|
* actually tested with mb1232 type
|
|
*
|
|
* Copyright (c) 2019 Andreas Klinger <ak@it-klinger.de>
|
|
*
|
|
* For details about the device see:
|
|
* https://www.maxbotix.com/documents/I2CXL-MaxSonar-EZ_Datasheet.pdf
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
|
|
/* registers of MaxSonar device */
|
|
#define MB1232_RANGE_COMMAND 0x51 /* Command for reading range */
|
|
#define MB1232_ADDR_UNLOCK_1 0xAA /* Command 1 for changing address */
|
|
#define MB1232_ADDR_UNLOCK_2 0xA5 /* Command 2 for changing address */
|
|
|
|
struct mb1232_data {
|
|
struct i2c_client *client;
|
|
|
|
struct mutex lock;
|
|
|
|
/*
|
|
* optionally a gpio can be used to announce when ranging has
|
|
* finished
|
|
* since we are just using the falling trigger of it we request
|
|
* only the interrupt for announcing when data is ready to be read
|
|
*/
|
|
struct completion ranging;
|
|
int irqnr;
|
|
};
|
|
|
|
static irqreturn_t mb1232_handle_irq(int irq, void *dev_id)
|
|
{
|
|
struct iio_dev *indio_dev = dev_id;
|
|
struct mb1232_data *data = iio_priv(indio_dev);
|
|
|
|
complete(&data->ranging);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static s16 mb1232_read_distance(struct mb1232_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
int ret;
|
|
s16 distance;
|
|
__be16 buf;
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
reinit_completion(&data->ranging);
|
|
|
|
ret = i2c_smbus_write_byte(client, MB1232_RANGE_COMMAND);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "write command - err: %d\n", ret);
|
|
goto error_unlock;
|
|
}
|
|
|
|
if (data->irqnr >= 0) {
|
|
/* it cannot take more than 100 ms */
|
|
ret = wait_for_completion_killable_timeout(&data->ranging,
|
|
HZ/10);
|
|
if (ret < 0)
|
|
goto error_unlock;
|
|
else if (ret == 0) {
|
|
ret = -ETIMEDOUT;
|
|
goto error_unlock;
|
|
}
|
|
} else {
|
|
/* use simple sleep if announce irq is not connected */
|
|
msleep(15);
|
|
}
|
|
|
|
ret = i2c_master_recv(client, (char *)&buf, sizeof(buf));
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "i2c_master_recv: ret=%d\n", ret);
|
|
goto error_unlock;
|
|
}
|
|
|
|
distance = __be16_to_cpu(buf);
|
|
/* check for not returning misleading error codes */
|
|
if (distance < 0) {
|
|
dev_err(&client->dev, "distance=%d\n", distance);
|
|
ret = -EINVAL;
|
|
goto error_unlock;
|
|
}
|
|
|
|
mutex_unlock(&data->lock);
|
|
|
|
return distance;
|
|
|
|
error_unlock:
|
|
mutex_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t mb1232_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct mb1232_data *data = iio_priv(indio_dev);
|
|
/*
|
|
* triggered buffer
|
|
* 16-bit channel + 48-bit padding + 64-bit timestamp
|
|
*/
|
|
s16 buffer[8] = { 0 };
|
|
|
|
buffer[0] = mb1232_read_distance(data);
|
|
if (buffer[0] < 0)
|
|
goto err;
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev, buffer, pf->timestamp);
|
|
|
|
err:
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int mb1232_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *channel, int *val,
|
|
int *val2, long mask)
|
|
{
|
|
struct mb1232_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
if (channel->type != IIO_DISTANCE)
|
|
return -EINVAL;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = mb1232_read_distance(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = ret;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
/* 1 LSB is 1 cm */
|
|
*val = 0;
|
|
*val2 = 10000;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct iio_chan_spec mb1232_channels[] = {
|
|
{
|
|
.type = IIO_DISTANCE,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE),
|
|
.scan_index = 0,
|
|
.scan_type = {
|
|
.sign = 's',
|
|
.realbits = 16,
|
|
.storagebits = 16,
|
|
.endianness = IIO_CPU,
|
|
},
|
|
},
|
|
IIO_CHAN_SOFT_TIMESTAMP(1),
|
|
};
|
|
|
|
static const struct iio_info mb1232_info = {
|
|
.read_raw = mb1232_read_raw,
|
|
};
|
|
|
|
static int mb1232_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
struct mb1232_data *data;
|
|
int ret;
|
|
struct device *dev = &client->dev;
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_READ_BYTE |
|
|
I2C_FUNC_SMBUS_WRITE_BYTE))
|
|
return -ENODEV;
|
|
|
|
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
i2c_set_clientdata(client, indio_dev);
|
|
data->client = client;
|
|
|
|
indio_dev->info = &mb1232_info;
|
|
indio_dev->name = id->name;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = mb1232_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(mb1232_channels);
|
|
|
|
mutex_init(&data->lock);
|
|
|
|
init_completion(&data->ranging);
|
|
|
|
data->irqnr = irq_of_parse_and_map(dev->of_node, 0);
|
|
if (data->irqnr <= 0) {
|
|
/* usage of interrupt is optional */
|
|
data->irqnr = -1;
|
|
} else {
|
|
ret = devm_request_irq(dev, data->irqnr, mb1232_handle_irq,
|
|
IRQF_TRIGGER_FALLING, id->name, indio_dev);
|
|
if (ret < 0) {
|
|
dev_err(dev, "request_irq: %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
|
|
iio_pollfunc_store_time, mb1232_trigger_handler, NULL);
|
|
if (ret < 0) {
|
|
dev_err(dev, "setup of iio triggered buffer failed\n");
|
|
return ret;
|
|
}
|
|
|
|
return devm_iio_device_register(dev, indio_dev);
|
|
}
|
|
|
|
static const struct of_device_id of_mb1232_match[] = {
|
|
{ .compatible = "maxbotix,mb1202", },
|
|
{ .compatible = "maxbotix,mb1212", },
|
|
{ .compatible = "maxbotix,mb1222", },
|
|
{ .compatible = "maxbotix,mb1232", },
|
|
{ .compatible = "maxbotix,mb1242", },
|
|
{ .compatible = "maxbotix,mb7040", },
|
|
{ .compatible = "maxbotix,mb7137", },
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, of_mb1232_match);
|
|
|
|
static const struct i2c_device_id mb1232_id[] = {
|
|
{ "maxbotix-mb1202", },
|
|
{ "maxbotix-mb1212", },
|
|
{ "maxbotix-mb1222", },
|
|
{ "maxbotix-mb1232", },
|
|
{ "maxbotix-mb1242", },
|
|
{ "maxbotix-mb7040", },
|
|
{ "maxbotix-mb7137", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mb1232_id);
|
|
|
|
static struct i2c_driver mb1232_driver = {
|
|
.driver = {
|
|
.name = "maxbotix-mb1232",
|
|
.of_match_table = of_mb1232_match,
|
|
},
|
|
.probe = mb1232_probe,
|
|
.id_table = mb1232_id,
|
|
};
|
|
module_i2c_driver(mb1232_driver);
|
|
|
|
MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
|
|
MODULE_DESCRIPTION("Maxbotix I2CXL-MaxSonar i2c ultrasonic ranger driver");
|
|
MODULE_LICENSE("GPL");
|