mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 18:14:07 +08:00
e2ad9bca45
The RAVE watchdog is not a full system watchdog, but is used to reset ethernet switch when required. Change the name to better reflect this usage. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200313101138.25915-1-l.stach@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
749 lines
19 KiB
C
749 lines
19 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (C) 2015 Zodiac Inflight Innovations
|
|
*
|
|
* Author: Martyn Welch <martyn.welch@collabora.co.uk>
|
|
*
|
|
* Based on twl4030_wdt.c by Timo Kokkonen <timo.t.kokkonen at nokia.com>:
|
|
*
|
|
* Copyright (C) Nokia Corporation
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/ihex.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/types.h>
|
|
#include <linux/version.h>
|
|
#include <linux/watchdog.h>
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
#define ZIIRAVE_TIMEOUT_MIN 3
|
|
#define ZIIRAVE_TIMEOUT_MAX 255
|
|
#define ZIIRAVE_TIMEOUT_DEFAULT 30
|
|
|
|
#define ZIIRAVE_PING_VALUE 0x0
|
|
|
|
#define ZIIRAVE_STATE_INITIAL 0x0
|
|
#define ZIIRAVE_STATE_OFF 0x1
|
|
#define ZIIRAVE_STATE_ON 0x2
|
|
|
|
#define ZIIRAVE_FW_NAME "ziirave_wdt.fw"
|
|
|
|
static char *ziirave_reasons[] = {"power cycle", "hw watchdog", NULL, NULL,
|
|
"host request", NULL, "illegal configuration",
|
|
"illegal instruction", "illegal trap",
|
|
"unknown"};
|
|
|
|
#define ZIIRAVE_WDT_FIRM_VER_MAJOR 0x1
|
|
#define ZIIRAVE_WDT_BOOT_VER_MAJOR 0x3
|
|
#define ZIIRAVE_WDT_RESET_REASON 0x5
|
|
#define ZIIRAVE_WDT_STATE 0x6
|
|
#define ZIIRAVE_WDT_TIMEOUT 0x7
|
|
#define ZIIRAVE_WDT_TIME_LEFT 0x8
|
|
#define ZIIRAVE_WDT_PING 0x9
|
|
#define ZIIRAVE_WDT_RESET_DURATION 0xa
|
|
|
|
#define ZIIRAVE_FIRM_PKT_TOTAL_SIZE 20
|
|
#define ZIIRAVE_FIRM_PKT_DATA_SIZE 16
|
|
#define ZIIRAVE_FIRM_FLASH_MEMORY_START (2 * 0x1600)
|
|
#define ZIIRAVE_FIRM_FLASH_MEMORY_END (2 * 0x2bbf)
|
|
#define ZIIRAVE_FIRM_PAGE_SIZE 128
|
|
|
|
/* Received and ready for next Download packet. */
|
|
#define ZIIRAVE_FIRM_DOWNLOAD_ACK 1
|
|
|
|
/* Firmware commands */
|
|
#define ZIIRAVE_CMD_DOWNLOAD_START 0x10
|
|
#define ZIIRAVE_CMD_DOWNLOAD_END 0x11
|
|
#define ZIIRAVE_CMD_DOWNLOAD_SET_READ_ADDR 0x12
|
|
#define ZIIRAVE_CMD_DOWNLOAD_READ_BYTE 0x13
|
|
#define ZIIRAVE_CMD_RESET_PROCESSOR 0x0b
|
|
#define ZIIRAVE_CMD_JUMP_TO_BOOTLOADER 0x0c
|
|
#define ZIIRAVE_CMD_DOWNLOAD_PACKET 0x0e
|
|
|
|
#define ZIIRAVE_CMD_JUMP_TO_BOOTLOADER_MAGIC 1
|
|
#define ZIIRAVE_CMD_RESET_PROCESSOR_MAGIC 1
|
|
|
|
#define ZIIRAVE_FW_VERSION_FMT "02.%02u.%02u"
|
|
#define ZIIRAVE_BL_VERSION_FMT "01.%02u.%02u"
|
|
|
|
struct ziirave_wdt_rev {
|
|
unsigned char major;
|
|
unsigned char minor;
|
|
};
|
|
|
|
struct ziirave_wdt_data {
|
|
struct mutex sysfs_mutex;
|
|
struct watchdog_device wdd;
|
|
struct ziirave_wdt_rev bootloader_rev;
|
|
struct ziirave_wdt_rev firmware_rev;
|
|
int reset_reason;
|
|
};
|
|
|
|
static int wdt_timeout;
|
|
module_param(wdt_timeout, int, 0);
|
|
MODULE_PARM_DESC(wdt_timeout, "Watchdog timeout in seconds");
|
|
|
|
static int reset_duration;
|
|
module_param(reset_duration, int, 0);
|
|
MODULE_PARM_DESC(reset_duration,
|
|
"Watchdog reset pulse duration in milliseconds");
|
|
|
|
static bool nowayout = WATCHDOG_NOWAYOUT;
|
|
module_param(nowayout, bool, 0);
|
|
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started default="
|
|
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
|
|
static int ziirave_wdt_revision(struct i2c_client *client,
|
|
struct ziirave_wdt_rev *rev, u8 command)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(client, command);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
rev->major = ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(client, command + 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
rev->minor = ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ziirave_wdt_set_state(struct watchdog_device *wdd, int state)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(wdd->parent);
|
|
|
|
return i2c_smbus_write_byte_data(client, ZIIRAVE_WDT_STATE, state);
|
|
}
|
|
|
|
static int ziirave_wdt_start(struct watchdog_device *wdd)
|
|
{
|
|
return ziirave_wdt_set_state(wdd, ZIIRAVE_STATE_ON);
|
|
}
|
|
|
|
static int ziirave_wdt_stop(struct watchdog_device *wdd)
|
|
{
|
|
return ziirave_wdt_set_state(wdd, ZIIRAVE_STATE_OFF);
|
|
}
|
|
|
|
static int ziirave_wdt_ping(struct watchdog_device *wdd)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(wdd->parent);
|
|
|
|
return i2c_smbus_write_byte_data(client, ZIIRAVE_WDT_PING,
|
|
ZIIRAVE_PING_VALUE);
|
|
}
|
|
|
|
static int ziirave_wdt_set_timeout(struct watchdog_device *wdd,
|
|
unsigned int timeout)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(wdd->parent);
|
|
int ret;
|
|
|
|
ret = i2c_smbus_write_byte_data(client, ZIIRAVE_WDT_TIMEOUT, timeout);
|
|
if (!ret)
|
|
wdd->timeout = timeout;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static unsigned int ziirave_wdt_get_timeleft(struct watchdog_device *wdd)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(wdd->parent);
|
|
int ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(client, ZIIRAVE_WDT_TIME_LEFT);
|
|
if (ret < 0)
|
|
ret = 0;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ziirave_firm_read_ack(struct watchdog_device *wdd)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(wdd->parent);
|
|
int ret;
|
|
|
|
ret = i2c_smbus_read_byte(client);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Failed to read status byte\n");
|
|
return ret;
|
|
}
|
|
|
|
return ret == ZIIRAVE_FIRM_DOWNLOAD_ACK ? 0 : -EIO;
|
|
}
|
|
|
|
static int ziirave_firm_set_read_addr(struct watchdog_device *wdd, u32 addr)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(wdd->parent);
|
|
const u16 addr16 = (u16)addr / 2;
|
|
u8 address[2];
|
|
|
|
put_unaligned_le16(addr16, address);
|
|
|
|
return i2c_smbus_write_block_data(client,
|
|
ZIIRAVE_CMD_DOWNLOAD_SET_READ_ADDR,
|
|
sizeof(address), address);
|
|
}
|
|
|
|
static bool ziirave_firm_addr_readonly(u32 addr)
|
|
{
|
|
return addr < ZIIRAVE_FIRM_FLASH_MEMORY_START ||
|
|
addr > ZIIRAVE_FIRM_FLASH_MEMORY_END;
|
|
}
|
|
|
|
/*
|
|
* ziirave_firm_write_pkt() - Build and write a firmware packet
|
|
*
|
|
* A packet to send to the firmware is composed by following bytes:
|
|
* Length | Addr0 | Addr1 | Data0 .. Data15 | Checksum |
|
|
* Where,
|
|
* Length: A data byte containing the length of the data.
|
|
* Addr0: Low byte of the address.
|
|
* Addr1: High byte of the address.
|
|
* Data0 .. Data15: Array of 16 bytes of data.
|
|
* Checksum: Checksum byte to verify data integrity.
|
|
*/
|
|
static int __ziirave_firm_write_pkt(struct watchdog_device *wdd,
|
|
u32 addr, const u8 *data, u8 len)
|
|
{
|
|
const u16 addr16 = (u16)addr / 2;
|
|
struct i2c_client *client = to_i2c_client(wdd->parent);
|
|
u8 i, checksum = 0, packet[ZIIRAVE_FIRM_PKT_TOTAL_SIZE];
|
|
int ret;
|
|
|
|
/* Check max data size */
|
|
if (len > ZIIRAVE_FIRM_PKT_DATA_SIZE) {
|
|
dev_err(&client->dev, "Firmware packet too long (%d)\n",
|
|
len);
|
|
return -EMSGSIZE;
|
|
}
|
|
|
|
/*
|
|
* Ignore packets that are targeting program memory outisde of
|
|
* app partition, since they will be ignored by the
|
|
* bootloader. At the same time, we need to make sure we'll
|
|
* allow zero length packet that will be sent as the last step
|
|
* of firmware update
|
|
*/
|
|
if (len && ziirave_firm_addr_readonly(addr))
|
|
return 0;
|
|
|
|
/* Packet length */
|
|
packet[0] = len;
|
|
/* Packet address */
|
|
put_unaligned_le16(addr16, packet + 1);
|
|
|
|
memcpy(packet + 3, data, len);
|
|
memset(packet + 3 + len, 0, ZIIRAVE_FIRM_PKT_DATA_SIZE - len);
|
|
|
|
/* Packet checksum */
|
|
for (i = 0; i < len + 3; i++)
|
|
checksum += packet[i];
|
|
packet[ZIIRAVE_FIRM_PKT_TOTAL_SIZE - 1] = checksum;
|
|
|
|
ret = i2c_smbus_write_block_data(client, ZIIRAVE_CMD_DOWNLOAD_PACKET,
|
|
sizeof(packet), packet);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"Failed to send DOWNLOAD_PACKET: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ziirave_firm_read_ack(wdd);
|
|
if (ret)
|
|
dev_err(&client->dev,
|
|
"Failed to write firmware packet at address 0x%04x: %d\n",
|
|
addr, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ziirave_firm_write_pkt(struct watchdog_device *wdd,
|
|
u32 addr, const u8 *data, u8 len)
|
|
{
|
|
const u8 max_write_len = ZIIRAVE_FIRM_PAGE_SIZE -
|
|
(addr - ALIGN_DOWN(addr, ZIIRAVE_FIRM_PAGE_SIZE));
|
|
int ret;
|
|
|
|
if (len > max_write_len) {
|
|
/*
|
|
* If data crossed page boundary we need to split this
|
|
* write in two
|
|
*/
|
|
ret = __ziirave_firm_write_pkt(wdd, addr, data, max_write_len);
|
|
if (ret)
|
|
return ret;
|
|
|
|
addr += max_write_len;
|
|
data += max_write_len;
|
|
len -= max_write_len;
|
|
}
|
|
|
|
return __ziirave_firm_write_pkt(wdd, addr, data, len);
|
|
}
|
|
|
|
static int ziirave_firm_verify(struct watchdog_device *wdd,
|
|
const struct firmware *fw)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(wdd->parent);
|
|
const struct ihex_binrec *rec;
|
|
int i, ret;
|
|
u8 data[ZIIRAVE_FIRM_PKT_DATA_SIZE];
|
|
|
|
for (rec = (void *)fw->data; rec; rec = ihex_next_binrec(rec)) {
|
|
const u16 len = be16_to_cpu(rec->len);
|
|
const u32 addr = be32_to_cpu(rec->addr);
|
|
|
|
if (ziirave_firm_addr_readonly(addr))
|
|
continue;
|
|
|
|
ret = ziirave_firm_set_read_addr(wdd, addr);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"Failed to send SET_READ_ADDR command: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < len; i++) {
|
|
ret = i2c_smbus_read_byte_data(client,
|
|
ZIIRAVE_CMD_DOWNLOAD_READ_BYTE);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev,
|
|
"Failed to READ DATA: %d\n", ret);
|
|
return ret;
|
|
}
|
|
data[i] = ret;
|
|
}
|
|
|
|
if (memcmp(data, rec->data, len)) {
|
|
dev_err(&client->dev,
|
|
"Firmware mismatch at address 0x%04x\n", addr);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ziirave_firm_upload(struct watchdog_device *wdd,
|
|
const struct firmware *fw)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(wdd->parent);
|
|
const struct ihex_binrec *rec;
|
|
int ret;
|
|
|
|
ret = i2c_smbus_write_byte_data(client,
|
|
ZIIRAVE_CMD_JUMP_TO_BOOTLOADER,
|
|
ZIIRAVE_CMD_JUMP_TO_BOOTLOADER_MAGIC);
|
|
if (ret) {
|
|
dev_err(&client->dev, "Failed to jump to bootloader\n");
|
|
return ret;
|
|
}
|
|
|
|
msleep(500);
|
|
|
|
ret = i2c_smbus_write_byte(client, ZIIRAVE_CMD_DOWNLOAD_START);
|
|
if (ret) {
|
|
dev_err(&client->dev, "Failed to start download\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = ziirave_firm_read_ack(wdd);
|
|
if (ret) {
|
|
dev_err(&client->dev, "No ACK for start download\n");
|
|
return ret;
|
|
}
|
|
|
|
msleep(500);
|
|
|
|
for (rec = (void *)fw->data; rec; rec = ihex_next_binrec(rec)) {
|
|
ret = ziirave_firm_write_pkt(wdd, be32_to_cpu(rec->addr),
|
|
rec->data, be16_to_cpu(rec->len));
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Finish firmware download process by sending a zero length
|
|
* payload
|
|
*/
|
|
ret = ziirave_firm_write_pkt(wdd, 0, NULL, 0);
|
|
if (ret) {
|
|
dev_err(&client->dev, "Failed to send EMPTY packet: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* This sleep seems to be required */
|
|
msleep(20);
|
|
|
|
/* Start firmware verification */
|
|
ret = ziirave_firm_verify(wdd, fw);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"Failed to verify firmware: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* End download operation */
|
|
ret = i2c_smbus_write_byte(client, ZIIRAVE_CMD_DOWNLOAD_END);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"Failed to end firmware download: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Reset the processor */
|
|
ret = i2c_smbus_write_byte_data(client,
|
|
ZIIRAVE_CMD_RESET_PROCESSOR,
|
|
ZIIRAVE_CMD_RESET_PROCESSOR_MAGIC);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"Failed to reset the watchdog: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
msleep(500);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct watchdog_info ziirave_wdt_info = {
|
|
.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
|
|
.identity = "RAVE Switch Watchdog",
|
|
};
|
|
|
|
static const struct watchdog_ops ziirave_wdt_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = ziirave_wdt_start,
|
|
.stop = ziirave_wdt_stop,
|
|
.ping = ziirave_wdt_ping,
|
|
.set_timeout = ziirave_wdt_set_timeout,
|
|
.get_timeleft = ziirave_wdt_get_timeleft,
|
|
};
|
|
|
|
static ssize_t ziirave_wdt_sysfs_show_firm(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev->parent);
|
|
struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client);
|
|
int ret;
|
|
|
|
ret = mutex_lock_interruptible(&w_priv->sysfs_mutex);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = sprintf(buf, ZIIRAVE_FW_VERSION_FMT, w_priv->firmware_rev.major,
|
|
w_priv->firmware_rev.minor);
|
|
|
|
mutex_unlock(&w_priv->sysfs_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static DEVICE_ATTR(firmware_version, S_IRUGO, ziirave_wdt_sysfs_show_firm,
|
|
NULL);
|
|
|
|
static ssize_t ziirave_wdt_sysfs_show_boot(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev->parent);
|
|
struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client);
|
|
int ret;
|
|
|
|
ret = mutex_lock_interruptible(&w_priv->sysfs_mutex);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = sprintf(buf, ZIIRAVE_BL_VERSION_FMT, w_priv->bootloader_rev.major,
|
|
w_priv->bootloader_rev.minor);
|
|
|
|
mutex_unlock(&w_priv->sysfs_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static DEVICE_ATTR(bootloader_version, S_IRUGO, ziirave_wdt_sysfs_show_boot,
|
|
NULL);
|
|
|
|
static ssize_t ziirave_wdt_sysfs_show_reason(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev->parent);
|
|
struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client);
|
|
int ret;
|
|
|
|
ret = mutex_lock_interruptible(&w_priv->sysfs_mutex);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = sprintf(buf, "%s", ziirave_reasons[w_priv->reset_reason]);
|
|
|
|
mutex_unlock(&w_priv->sysfs_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static DEVICE_ATTR(reset_reason, S_IRUGO, ziirave_wdt_sysfs_show_reason,
|
|
NULL);
|
|
|
|
static ssize_t ziirave_wdt_sysfs_store_firm(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev->parent);
|
|
struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client);
|
|
const struct firmware *fw;
|
|
int err;
|
|
|
|
err = request_ihex_firmware(&fw, ZIIRAVE_FW_NAME, dev);
|
|
if (err) {
|
|
dev_err(&client->dev, "Failed to request ihex firmware\n");
|
|
return err;
|
|
}
|
|
|
|
err = mutex_lock_interruptible(&w_priv->sysfs_mutex);
|
|
if (err)
|
|
goto release_firmware;
|
|
|
|
err = ziirave_firm_upload(&w_priv->wdd, fw);
|
|
if (err) {
|
|
dev_err(&client->dev, "The firmware update failed: %d\n", err);
|
|
goto unlock_mutex;
|
|
}
|
|
|
|
/* Update firmware version */
|
|
err = ziirave_wdt_revision(client, &w_priv->firmware_rev,
|
|
ZIIRAVE_WDT_FIRM_VER_MAJOR);
|
|
if (err) {
|
|
dev_err(&client->dev, "Failed to read firmware version: %d\n",
|
|
err);
|
|
goto unlock_mutex;
|
|
}
|
|
|
|
dev_info(&client->dev,
|
|
"Firmware updated to version " ZIIRAVE_FW_VERSION_FMT "\n",
|
|
w_priv->firmware_rev.major, w_priv->firmware_rev.minor);
|
|
|
|
/* Restore the watchdog timeout */
|
|
err = ziirave_wdt_set_timeout(&w_priv->wdd, w_priv->wdd.timeout);
|
|
if (err)
|
|
dev_err(&client->dev, "Failed to set timeout: %d\n", err);
|
|
|
|
unlock_mutex:
|
|
mutex_unlock(&w_priv->sysfs_mutex);
|
|
|
|
release_firmware:
|
|
release_firmware(fw);
|
|
|
|
return err ? err : count;
|
|
}
|
|
|
|
static DEVICE_ATTR(update_firmware, S_IWUSR, NULL,
|
|
ziirave_wdt_sysfs_store_firm);
|
|
|
|
static struct attribute *ziirave_wdt_attrs[] = {
|
|
&dev_attr_firmware_version.attr,
|
|
&dev_attr_bootloader_version.attr,
|
|
&dev_attr_reset_reason.attr,
|
|
&dev_attr_update_firmware.attr,
|
|
NULL
|
|
};
|
|
ATTRIBUTE_GROUPS(ziirave_wdt);
|
|
|
|
static int ziirave_wdt_init_duration(struct i2c_client *client)
|
|
{
|
|
int ret;
|
|
|
|
if (!reset_duration) {
|
|
/* See if the reset pulse duration is provided in an of_node */
|
|
if (!client->dev.of_node)
|
|
ret = -ENODEV;
|
|
else
|
|
ret = of_property_read_u32(client->dev.of_node,
|
|
"reset-duration-ms",
|
|
&reset_duration);
|
|
if (ret) {
|
|
dev_info(&client->dev,
|
|
"No reset pulse duration specified, using default\n");
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
if (reset_duration < 1 || reset_duration > 255)
|
|
return -EINVAL;
|
|
|
|
dev_info(&client->dev, "Setting reset duration to %dms",
|
|
reset_duration);
|
|
|
|
return i2c_smbus_write_byte_data(client, ZIIRAVE_WDT_RESET_DURATION,
|
|
reset_duration);
|
|
}
|
|
|
|
static int ziirave_wdt_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
int ret;
|
|
struct ziirave_wdt_data *w_priv;
|
|
int val;
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_BYTE |
|
|
I2C_FUNC_SMBUS_BYTE_DATA |
|
|
I2C_FUNC_SMBUS_WRITE_BLOCK_DATA))
|
|
return -ENODEV;
|
|
|
|
w_priv = devm_kzalloc(&client->dev, sizeof(*w_priv), GFP_KERNEL);
|
|
if (!w_priv)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&w_priv->sysfs_mutex);
|
|
|
|
w_priv->wdd.info = &ziirave_wdt_info;
|
|
w_priv->wdd.ops = &ziirave_wdt_ops;
|
|
w_priv->wdd.min_timeout = ZIIRAVE_TIMEOUT_MIN;
|
|
w_priv->wdd.max_timeout = ZIIRAVE_TIMEOUT_MAX;
|
|
w_priv->wdd.parent = &client->dev;
|
|
w_priv->wdd.groups = ziirave_wdt_groups;
|
|
|
|
watchdog_init_timeout(&w_priv->wdd, wdt_timeout, &client->dev);
|
|
|
|
/*
|
|
* The default value set in the watchdog should be perfectly valid, so
|
|
* pass that in if we haven't provided one via the module parameter or
|
|
* of property.
|
|
*/
|
|
if (w_priv->wdd.timeout == 0) {
|
|
val = i2c_smbus_read_byte_data(client, ZIIRAVE_WDT_TIMEOUT);
|
|
if (val < 0) {
|
|
dev_err(&client->dev, "Failed to read timeout\n");
|
|
return val;
|
|
}
|
|
|
|
if (val > ZIIRAVE_TIMEOUT_MAX ||
|
|
val < ZIIRAVE_TIMEOUT_MIN)
|
|
val = ZIIRAVE_TIMEOUT_DEFAULT;
|
|
|
|
w_priv->wdd.timeout = val;
|
|
}
|
|
|
|
ret = ziirave_wdt_set_timeout(&w_priv->wdd, w_priv->wdd.timeout);
|
|
if (ret) {
|
|
dev_err(&client->dev, "Failed to set timeout\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_info(&client->dev, "Timeout set to %ds\n", w_priv->wdd.timeout);
|
|
|
|
watchdog_set_nowayout(&w_priv->wdd, nowayout);
|
|
|
|
i2c_set_clientdata(client, w_priv);
|
|
|
|
/* If in unconfigured state, set to stopped */
|
|
val = i2c_smbus_read_byte_data(client, ZIIRAVE_WDT_STATE);
|
|
if (val < 0) {
|
|
dev_err(&client->dev, "Failed to read state\n");
|
|
return val;
|
|
}
|
|
|
|
if (val == ZIIRAVE_STATE_INITIAL)
|
|
ziirave_wdt_stop(&w_priv->wdd);
|
|
|
|
ret = ziirave_wdt_init_duration(client);
|
|
if (ret) {
|
|
dev_err(&client->dev, "Failed to init duration\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = ziirave_wdt_revision(client, &w_priv->firmware_rev,
|
|
ZIIRAVE_WDT_FIRM_VER_MAJOR);
|
|
if (ret) {
|
|
dev_err(&client->dev, "Failed to read firmware version\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_info(&client->dev,
|
|
"Firmware version: " ZIIRAVE_FW_VERSION_FMT "\n",
|
|
w_priv->firmware_rev.major, w_priv->firmware_rev.minor);
|
|
|
|
ret = ziirave_wdt_revision(client, &w_priv->bootloader_rev,
|
|
ZIIRAVE_WDT_BOOT_VER_MAJOR);
|
|
if (ret) {
|
|
dev_err(&client->dev, "Failed to read bootloader version\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_info(&client->dev,
|
|
"Bootloader version: " ZIIRAVE_BL_VERSION_FMT "\n",
|
|
w_priv->bootloader_rev.major, w_priv->bootloader_rev.minor);
|
|
|
|
w_priv->reset_reason = i2c_smbus_read_byte_data(client,
|
|
ZIIRAVE_WDT_RESET_REASON);
|
|
if (w_priv->reset_reason < 0) {
|
|
dev_err(&client->dev, "Failed to read reset reason\n");
|
|
return w_priv->reset_reason;
|
|
}
|
|
|
|
if (w_priv->reset_reason >= ARRAY_SIZE(ziirave_reasons) ||
|
|
!ziirave_reasons[w_priv->reset_reason]) {
|
|
dev_err(&client->dev, "Invalid reset reason\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = watchdog_register_device(&w_priv->wdd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ziirave_wdt_remove(struct i2c_client *client)
|
|
{
|
|
struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client);
|
|
|
|
watchdog_unregister_device(&w_priv->wdd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id ziirave_wdt_id[] = {
|
|
{ "rave-wdt", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ziirave_wdt_id);
|
|
|
|
static const struct of_device_id zrv_wdt_of_match[] = {
|
|
{ .compatible = "zii,rave-wdt", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, zrv_wdt_of_match);
|
|
|
|
static struct i2c_driver ziirave_wdt_driver = {
|
|
.driver = {
|
|
.name = "ziirave_wdt",
|
|
.of_match_table = zrv_wdt_of_match,
|
|
},
|
|
.probe = ziirave_wdt_probe,
|
|
.remove = ziirave_wdt_remove,
|
|
.id_table = ziirave_wdt_id,
|
|
};
|
|
|
|
module_i2c_driver(ziirave_wdt_driver);
|
|
|
|
MODULE_AUTHOR("Martyn Welch <martyn.welch@collabora.co.uk");
|
|
MODULE_DESCRIPTION("Zodiac Aerospace RAVE Switch Watchdog Processor Driver");
|
|
MODULE_LICENSE("GPL");
|