mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 18:14:07 +08:00
b6dfb2477f
All watchdog drivers implement the same set of ioctl commands, and fortunately all of them are compatible between 32-bit and 64-bit architectures. Modern drivers always go through drivers/watchdog/wdt.c as an abstraction layer, but older ones implement their own file_operations on a character device for this. Move the handling from fs/compat_ioctl.c into the individual drivers. Note that most of the legacy drivers will never be used on 64-bit hardware, because they are for an old 32-bit SoC implementation, but doing them all at once is safer than trying to guess which ones do or do not need the compat_ioctl handling. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
423 lines
9.4 KiB
C
423 lines
9.4 KiB
C
/*
|
|
* IBM Automatic Server Restart driver.
|
|
*
|
|
* Copyright (c) 2005 Andrey Panin <pazke@donpac.ru>
|
|
*
|
|
* Based on driver written by Pete Reynolds.
|
|
* Copyright (c) IBM Corporation, 1998-2004.
|
|
*
|
|
* This software may be used and distributed according to the terms
|
|
* of the GNU Public License, incorporated herein by reference.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/fs.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/watchdog.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/io.h>
|
|
#include <linux/uaccess.h>
|
|
|
|
|
|
enum {
|
|
ASMTYPE_UNKNOWN,
|
|
ASMTYPE_TOPAZ,
|
|
ASMTYPE_JASPER,
|
|
ASMTYPE_PEARL,
|
|
ASMTYPE_JUNIPER,
|
|
ASMTYPE_SPRUCE,
|
|
};
|
|
|
|
#define TOPAZ_ASR_REG_OFFSET 4
|
|
#define TOPAZ_ASR_TOGGLE 0x40
|
|
#define TOPAZ_ASR_DISABLE 0x80
|
|
|
|
/* PEARL ASR S/W REGISTER SUPERIO PORT ADDRESSES */
|
|
#define PEARL_BASE 0xe04
|
|
#define PEARL_WRITE 0xe06
|
|
#define PEARL_READ 0xe07
|
|
|
|
#define PEARL_ASR_DISABLE_MASK 0x80 /* bit 7: disable = 1, enable = 0 */
|
|
#define PEARL_ASR_TOGGLE_MASK 0x40 /* bit 6: 0, then 1, then 0 */
|
|
|
|
/* JASPER OFFSET FROM SIO BASE ADDR TO ASR S/W REGISTERS. */
|
|
#define JASPER_ASR_REG_OFFSET 0x38
|
|
|
|
#define JASPER_ASR_DISABLE_MASK 0x01 /* bit 0: disable = 1, enable = 0 */
|
|
#define JASPER_ASR_TOGGLE_MASK 0x02 /* bit 1: 0, then 1, then 0 */
|
|
|
|
#define JUNIPER_BASE_ADDRESS 0x54b /* Base address of Juniper ASR */
|
|
#define JUNIPER_ASR_DISABLE_MASK 0x01 /* bit 0: disable = 1 enable = 0 */
|
|
#define JUNIPER_ASR_TOGGLE_MASK 0x02 /* bit 1: 0, then 1, then 0 */
|
|
|
|
#define SPRUCE_BASE_ADDRESS 0x118e /* Base address of Spruce ASR */
|
|
#define SPRUCE_ASR_DISABLE_MASK 0x01 /* bit 1: disable = 1 enable = 0 */
|
|
#define SPRUCE_ASR_TOGGLE_MASK 0x02 /* bit 0: 0, then 1, then 0 */
|
|
|
|
|
|
static bool nowayout = WATCHDOG_NOWAYOUT;
|
|
|
|
static unsigned long asr_is_open;
|
|
static char asr_expect_close;
|
|
|
|
static unsigned int asr_type, asr_base, asr_length;
|
|
static unsigned int asr_read_addr, asr_write_addr;
|
|
static unsigned char asr_toggle_mask, asr_disable_mask;
|
|
static DEFINE_SPINLOCK(asr_lock);
|
|
|
|
static void __asr_toggle(void)
|
|
{
|
|
unsigned char reg;
|
|
|
|
reg = inb(asr_read_addr);
|
|
|
|
outb(reg & ~asr_toggle_mask, asr_write_addr);
|
|
reg = inb(asr_read_addr);
|
|
|
|
outb(reg | asr_toggle_mask, asr_write_addr);
|
|
reg = inb(asr_read_addr);
|
|
|
|
outb(reg & ~asr_toggle_mask, asr_write_addr);
|
|
reg = inb(asr_read_addr);
|
|
}
|
|
|
|
static void asr_toggle(void)
|
|
{
|
|
spin_lock(&asr_lock);
|
|
__asr_toggle();
|
|
spin_unlock(&asr_lock);
|
|
}
|
|
|
|
static void asr_enable(void)
|
|
{
|
|
unsigned char reg;
|
|
|
|
spin_lock(&asr_lock);
|
|
if (asr_type == ASMTYPE_TOPAZ) {
|
|
/* asr_write_addr == asr_read_addr */
|
|
reg = inb(asr_read_addr);
|
|
outb(reg & ~(TOPAZ_ASR_TOGGLE | TOPAZ_ASR_DISABLE),
|
|
asr_read_addr);
|
|
} else {
|
|
/*
|
|
* First make sure the hardware timer is reset by toggling
|
|
* ASR hardware timer line.
|
|
*/
|
|
__asr_toggle();
|
|
|
|
reg = inb(asr_read_addr);
|
|
outb(reg & ~asr_disable_mask, asr_write_addr);
|
|
}
|
|
reg = inb(asr_read_addr);
|
|
spin_unlock(&asr_lock);
|
|
}
|
|
|
|
static void asr_disable(void)
|
|
{
|
|
unsigned char reg;
|
|
|
|
spin_lock(&asr_lock);
|
|
reg = inb(asr_read_addr);
|
|
|
|
if (asr_type == ASMTYPE_TOPAZ)
|
|
/* asr_write_addr == asr_read_addr */
|
|
outb(reg | TOPAZ_ASR_TOGGLE | TOPAZ_ASR_DISABLE,
|
|
asr_read_addr);
|
|
else {
|
|
outb(reg | asr_toggle_mask, asr_write_addr);
|
|
reg = inb(asr_read_addr);
|
|
|
|
outb(reg | asr_disable_mask, asr_write_addr);
|
|
}
|
|
reg = inb(asr_read_addr);
|
|
spin_unlock(&asr_lock);
|
|
}
|
|
|
|
static int __init asr_get_base_address(void)
|
|
{
|
|
unsigned char low, high;
|
|
const char *type = "";
|
|
|
|
asr_length = 1;
|
|
|
|
switch (asr_type) {
|
|
case ASMTYPE_TOPAZ:
|
|
/* SELECT SuperIO CHIP FOR QUERYING
|
|
(WRITE 0x07 TO BOTH 0x2E and 0x2F) */
|
|
outb(0x07, 0x2e);
|
|
outb(0x07, 0x2f);
|
|
|
|
/* SELECT AND READ THE HIGH-NIBBLE OF THE GPIO BASE ADDRESS */
|
|
outb(0x60, 0x2e);
|
|
high = inb(0x2f);
|
|
|
|
/* SELECT AND READ THE LOW-NIBBLE OF THE GPIO BASE ADDRESS */
|
|
outb(0x61, 0x2e);
|
|
low = inb(0x2f);
|
|
|
|
asr_base = (high << 16) | low;
|
|
asr_read_addr = asr_write_addr =
|
|
asr_base + TOPAZ_ASR_REG_OFFSET;
|
|
asr_length = 5;
|
|
|
|
break;
|
|
|
|
case ASMTYPE_JASPER:
|
|
type = "Jaspers ";
|
|
#if 0
|
|
u32 r;
|
|
/* Suggested fix */
|
|
pdev = pci_get_bus_and_slot(0, DEVFN(0x1f, 0));
|
|
if (pdev == NULL)
|
|
return -ENODEV;
|
|
pci_read_config_dword(pdev, 0x58, &r);
|
|
asr_base = r & 0xFFFE;
|
|
pci_dev_put(pdev);
|
|
#else
|
|
/* FIXME: need to use pci_config_lock here,
|
|
but it's not exported */
|
|
|
|
/* spin_lock_irqsave(&pci_config_lock, flags);*/
|
|
|
|
/* Select the SuperIO chip in the PCI I/O port register */
|
|
outl(0x8000f858, 0xcf8);
|
|
|
|
/* BUS 0, Slot 1F, fnc 0, offset 58 */
|
|
|
|
/*
|
|
* Read the base address for the SuperIO chip.
|
|
* Only the lower 16 bits are valid, but the address is word
|
|
* aligned so the last bit must be masked off.
|
|
*/
|
|
asr_base = inl(0xcfc) & 0xfffe;
|
|
|
|
/* spin_unlock_irqrestore(&pci_config_lock, flags);*/
|
|
#endif
|
|
asr_read_addr = asr_write_addr =
|
|
asr_base + JASPER_ASR_REG_OFFSET;
|
|
asr_toggle_mask = JASPER_ASR_TOGGLE_MASK;
|
|
asr_disable_mask = JASPER_ASR_DISABLE_MASK;
|
|
asr_length = JASPER_ASR_REG_OFFSET + 1;
|
|
|
|
break;
|
|
|
|
case ASMTYPE_PEARL:
|
|
type = "Pearls ";
|
|
asr_base = PEARL_BASE;
|
|
asr_read_addr = PEARL_READ;
|
|
asr_write_addr = PEARL_WRITE;
|
|
asr_toggle_mask = PEARL_ASR_TOGGLE_MASK;
|
|
asr_disable_mask = PEARL_ASR_DISABLE_MASK;
|
|
asr_length = 4;
|
|
break;
|
|
|
|
case ASMTYPE_JUNIPER:
|
|
type = "Junipers ";
|
|
asr_base = JUNIPER_BASE_ADDRESS;
|
|
asr_read_addr = asr_write_addr = asr_base;
|
|
asr_toggle_mask = JUNIPER_ASR_TOGGLE_MASK;
|
|
asr_disable_mask = JUNIPER_ASR_DISABLE_MASK;
|
|
break;
|
|
|
|
case ASMTYPE_SPRUCE:
|
|
type = "Spruce's ";
|
|
asr_base = SPRUCE_BASE_ADDRESS;
|
|
asr_read_addr = asr_write_addr = asr_base;
|
|
asr_toggle_mask = SPRUCE_ASR_TOGGLE_MASK;
|
|
asr_disable_mask = SPRUCE_ASR_DISABLE_MASK;
|
|
break;
|
|
}
|
|
|
|
if (!request_region(asr_base, asr_length, "ibmasr")) {
|
|
pr_err("address %#x already in use\n", asr_base);
|
|
return -EBUSY;
|
|
}
|
|
|
|
pr_info("found %sASR @ addr %#x\n", type, asr_base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static ssize_t asr_write(struct file *file, const char __user *buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
if (count) {
|
|
if (!nowayout) {
|
|
size_t i;
|
|
|
|
/* In case it was set long ago */
|
|
asr_expect_close = 0;
|
|
|
|
for (i = 0; i != count; i++) {
|
|
char c;
|
|
if (get_user(c, buf + i))
|
|
return -EFAULT;
|
|
if (c == 'V')
|
|
asr_expect_close = 42;
|
|
}
|
|
}
|
|
asr_toggle();
|
|
}
|
|
return count;
|
|
}
|
|
|
|
static long asr_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
|
|
{
|
|
static const struct watchdog_info ident = {
|
|
.options = WDIOF_KEEPALIVEPING |
|
|
WDIOF_MAGICCLOSE,
|
|
.identity = "IBM ASR",
|
|
};
|
|
void __user *argp = (void __user *)arg;
|
|
int __user *p = argp;
|
|
int heartbeat;
|
|
|
|
switch (cmd) {
|
|
case WDIOC_GETSUPPORT:
|
|
return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
|
|
case WDIOC_GETSTATUS:
|
|
case WDIOC_GETBOOTSTATUS:
|
|
return put_user(0, p);
|
|
case WDIOC_SETOPTIONS:
|
|
{
|
|
int new_options, retval = -EINVAL;
|
|
if (get_user(new_options, p))
|
|
return -EFAULT;
|
|
if (new_options & WDIOS_DISABLECARD) {
|
|
asr_disable();
|
|
retval = 0;
|
|
}
|
|
if (new_options & WDIOS_ENABLECARD) {
|
|
asr_enable();
|
|
asr_toggle();
|
|
retval = 0;
|
|
}
|
|
return retval;
|
|
}
|
|
case WDIOC_KEEPALIVE:
|
|
asr_toggle();
|
|
return 0;
|
|
/*
|
|
* The hardware has a fixed timeout value, so no WDIOC_SETTIMEOUT
|
|
* and WDIOC_GETTIMEOUT always returns 256.
|
|
*/
|
|
case WDIOC_GETTIMEOUT:
|
|
heartbeat = 256;
|
|
return put_user(heartbeat, p);
|
|
default:
|
|
return -ENOTTY;
|
|
}
|
|
}
|
|
|
|
static int asr_open(struct inode *inode, struct file *file)
|
|
{
|
|
if (test_and_set_bit(0, &asr_is_open))
|
|
return -EBUSY;
|
|
|
|
asr_toggle();
|
|
asr_enable();
|
|
|
|
return stream_open(inode, file);
|
|
}
|
|
|
|
static int asr_release(struct inode *inode, struct file *file)
|
|
{
|
|
if (asr_expect_close == 42)
|
|
asr_disable();
|
|
else {
|
|
pr_crit("unexpected close, not stopping watchdog!\n");
|
|
asr_toggle();
|
|
}
|
|
clear_bit(0, &asr_is_open);
|
|
asr_expect_close = 0;
|
|
return 0;
|
|
}
|
|
|
|
static const struct file_operations asr_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.write = asr_write,
|
|
.unlocked_ioctl = asr_ioctl,
|
|
.compat_ioctl = compat_ptr_ioctl,
|
|
.open = asr_open,
|
|
.release = asr_release,
|
|
};
|
|
|
|
static struct miscdevice asr_miscdev = {
|
|
.minor = WATCHDOG_MINOR,
|
|
.name = "watchdog",
|
|
.fops = &asr_fops,
|
|
};
|
|
|
|
|
|
struct ibmasr_id {
|
|
const char *desc;
|
|
int type;
|
|
};
|
|
|
|
static struct ibmasr_id ibmasr_id_table[] __initdata = {
|
|
{ "IBM Automatic Server Restart - eserver xSeries 220", ASMTYPE_TOPAZ },
|
|
{ "IBM Automatic Server Restart - Machine Type 8673", ASMTYPE_PEARL },
|
|
{ "IBM Automatic Server Restart - Machine Type 8480", ASMTYPE_JASPER },
|
|
{ "IBM Automatic Server Restart - Machine Type 8482", ASMTYPE_JUNIPER },
|
|
{ "IBM Automatic Server Restart - Machine Type 8648", ASMTYPE_SPRUCE },
|
|
{ NULL }
|
|
};
|
|
|
|
static int __init ibmasr_init(void)
|
|
{
|
|
struct ibmasr_id *id;
|
|
int rc;
|
|
|
|
for (id = ibmasr_id_table; id->desc; id++) {
|
|
if (dmi_find_device(DMI_DEV_TYPE_OTHER, id->desc, NULL)) {
|
|
asr_type = id->type;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!asr_type)
|
|
return -ENODEV;
|
|
|
|
rc = asr_get_base_address();
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = misc_register(&asr_miscdev);
|
|
if (rc < 0) {
|
|
release_region(asr_base, asr_length);
|
|
pr_err("failed to register misc device\n");
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit ibmasr_exit(void)
|
|
{
|
|
if (!nowayout)
|
|
asr_disable();
|
|
|
|
misc_deregister(&asr_miscdev);
|
|
|
|
release_region(asr_base, asr_length);
|
|
}
|
|
|
|
module_init(ibmasr_init);
|
|
module_exit(ibmasr_exit);
|
|
|
|
module_param(nowayout, bool, 0);
|
|
MODULE_PARM_DESC(nowayout,
|
|
"Watchdog cannot be stopped once started (default="
|
|
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
|
|
MODULE_DESCRIPTION("IBM Automatic Server Restart driver");
|
|
MODULE_AUTHOR("Andrey Panin");
|
|
MODULE_LICENSE("GPL");
|